Knives are currently popular not only in the kitchen, but among people who have tied their lives with extreme types of active leisure - this is: fishing, hunting, tourism, etc.

On the market in modern times there are various knives: variable models, different dimensions and designs. But no of them can replace the knife, which is made with your own hands.

About how to make a knife with your own hands, often write on the Internet, and to make them should be done.

Knives: species and basic properties

In the photos of the knife on the Internet, it can be noted that each product is a creative element created from various mechanisms.

There is a large classification of knives depending on their functionality: combat, tourist, folding (for example, butterfly), knives designed for hunting, multitulas, bivory knives, as well as ordinary kitchen knives.

Kitchen knives are purchased ready, but knives intended for hunting or for tourism can be easily made at home independently.

There are still such knives as knives for survival, the main task of which is assistance in existence in wildlife conditions. This option is relevant for tourists and hunters.

The blade of such a knife is usually no more than 12 cm. Such length is sufficient for cutting wood, processing game, cleaning fish or other similar actions. Small dimensions facilitate the transportation of such a knife.

In the manufacture of such a knife, great attention should be paid to the material designed to create a blade. Preference is often given steel.

Course of action when creating a knife

To get a positive result during the manufacture of a knife, it should be pre-made an outline of a knife drawing. In this case, you can know in advance what you want to achieve at the end.

Instructions, how to make a knife at home includes a number of rules.

Make a knife step by step

Cut the workpiece for the future knife. Relying on the finished drawing, cut out the shape for the knife.

A sharpener for knives will be required. With it, bring the basis to the necessary form. And in the hands it will be after that a clear billet, where you can distinguish the places of the handle and blade.

Chernoval sharpening knives. At this stage, you need to know why your future knife is intended for. If it is made for hunting, fishing or tourist hikes, it is better to give preference to the blade type of sharpening.

And if the knife is created for functioning in the kitchen or in the garden, it will suit the razor type.

Do not expect an ideal sharpening from this stage, because it is just a rough version designed to determine the future form.

If the blade is pre-prepared, you can start working with the handle. To create a handle, a variety of materials are used - this is a tree, organic glass, bones, thick skin species, etc.

Note!

Cutting the workpiece to create a handle, should be checked, whether it is convenient to go to the hand, as well as its proportionality relative to the blade. Handle for the knife is fixed using the riveting method.

The form for a foot handle is attached with a grinding machine.

The knife is grinning and polished on the basis of sandpaper.

The final sharpening blade is made after sharpening on the sharpener, also using sandpaper.

At the end, the finished knife is polished by a blachotka or polyrolla.

Note!

As you can see, the process of manufacturing a knife is not so complicated with their own hands, so everyone can try their strength in this area.

You can also set the future knife the desired and desired design. Pay special attention to the design of the handle.

Knife design

Since it is precisely on the knife on the knob then the rest can judge your creative thinking and status.

Some write their names on the knives on the handles, draw certain patterns and sketches in the form of tattoos.

The easiest knife can be built in the emergency situation in the forest, the main thing is to find the materials you need to create it.

Note!

It is worth finding only the cutting part for the knife, and then you should insert it only into the handle, which will be in the form of a piece of wood, ropes or skin.

Photo knife with hands

Be able to manage or just buy for your money. But what if you do not want to spend your money? That's right, you can print your knife with the help of drawings.
Naturally, this knife will not be in the game, but at least somehow you can rejoice.

Drawings of knife

If you want to print a knife, and then it will qualitatively draw or make a knife from corrugated cardboard - then for this we attached screenshots, and with their help you can first print knives, and then do what you want. I will say right away that make a real copy of the knife is not so easy, so tune yourself to the fact that you are good. Having made a knife, throw in the comments links to photos and the best I will publish in the article.

Knife butterfly drawing

This knife will make the most difficult. Therefore, I advise you to first make some simple knife, for example - a hunting knife. The butterfly will do the most difficult, because you will need to come up with something in order for it to spin. And it will not be so easy to do it.

The screenshot is made of real size, so that you do not seek unnecessary sizes. Printing the knife, you yourself will be able to measure what you need.

Hunting knife kc

The drawing of the hunting knife is simpler, so it will be easier to do. However, with the handle will have to go a little and ideally make it out of wood.

Bayon knife kc go

It is also not very difficult to do it, so in a couple of hours you can make the beauty that you can admire the days.

Knife Cerambitus drawing

By the way, this knife is very easy to do, although it might and seem otherwise. For 2-3 hours of work, you can make it and paint in the right color.

Bayonet knife m9 drawing

It is as easy to do, like a cembiton.

The real dimensions of the drawings I could not accommodate because of the big weight. Therefore, I poured all the drawings on the Yandex drive from which you download pictures in a few minutes.

If you really make some kind of knife according to these drawings, then throw off the links be sure to comments.

Knife with a blade hook

The drawing of this knife is shown below.

Tiley knives

This drawing can also be printed and perform it from plywood.

Fake

The drawing for fakes by the way is also quite complicated.
Photos of small size so that you can comfortably watch them from a mobile phone. To see and print the real dimensions of the drawings you need to download the archive from the Yandex disk.

Making the perfect cold weapons at home is difficult. This will require accurate drawings with dimensions. Throwing knives are created from durable metal, which is for a long time to calculate to get a really sharp product.

Otherwise, it will just bounce off the goal, and not to dive into it. In addition, it is necessary to pick up a good material for the handle so that the tool is conveniently located in the hand.

Preparation of steel

To make a throwing knife with your own hands at home, you must first decide on the type of weapons, which form will have a blade and handle. It is also worth taking care of the material, tools and special equipment that will be needed in the process. The list of necessary includes:

• the sheet has become thick of 4 millimeters;
• sandpaper;
• metal cutting hacksaw;
• special vice;
• cardboard or tight paper;
• scissors;
• simple pencil and marker;
• file;

Manufacture of a knife has its own characteristics, since the main function of the product is to carry stakes, so the edge must be even and straight. It is the form of the blade that plays a big role.

Most of all, steel is suitable for homemade knife, but if the sheet, from which it is planned to make the workpiece, has irregularities and a large thickness, then it will be necessary to draw a drawing, for this you will need a specialist for blacksmithing. It must make the plates of the required thickness. Otherwise, it will be impossible to get perfectly smooth weapons. Metal forging is carried out under the influence of high temperature. If at home it does not work this procedure, then you can ask for the help of factory blacksmiths.

In the process of forging, you need to get a flat steel plate, the thickness of which should be no more and at least 4 millimeters. The fact is that in the process of manufacturing on the product, "sinks" are formed, which must be eliminated by heating. That is why the process must be carefully monitored, otherwise the weapon can lose most of its thickness.

At the end of the work, a steel product should be turned out, the parameters of which exactly correspond to the sizes of the future throwing knife.

Upon completion of forging is determined by form of cold weapons. It is possible at home to make a knife for throwing with recesses, protrusions or to do holes in them. But experts advise to abandon additional elements and intricate forms, especially if the product is done for the first time. The finished blade must be conveniently located in the hand, but not to be too big or, on the contrary, very small.

Material for handles

Even the most perfect throwing knife will become ineffective if he has an uncomfortable handle. The fact is that it is this part that answers the quality of the throw. It will fly the blade in the right side or not, and whether the hands will also be installed, completely depends on the handle.

The material that is used to make the handle should be durable and pleasant to the touch. It should not absorb blood, and also when cold is treated. Basic requirements for the quality of the material, next:

An ideal raw material for making a knife knife for throwing is considered a tree, it is enough to find and easy to process, creating a reliable and attractive handle. Billets made from dense varieties of wood, especially good for this maple, ash and apple tree. Conifer breeds are better not to use, but Bereza can take kapa (growths).

In the workpieces are done small holes for the nozzle on the shank. In the case when it is planned to mount a handle that will lightly go beyond the blade, these holes need to be made through. At the same time, the handle should be in diameter a little more shank so that the latter is easy to enter into and not split it. The openings in the rectangle are done at the stage of the junction of the handle and blade. This is due to the fact that the transverse dimensions of the shank can change during the manufacturing process.

You can collect Beresto alone. Start work from twisting the material using the nut, which is gradually screwed into a thread located on the tip of the shank. As it should be added to add these wooden plastics and do it until the beret makes one dense and solid briquette. At the same time, the thread turns should remain under the nut.

Material itself must be prepared. For this, a special processing is held for this: withstand wood in hot water over two hours, after which it becomes softer and it is much easier and more easier to work with it. After cooking, Berest is carefully dried by naturally, and already cut into rectangular plates of small sizes.

Now you need to take a sharp knife and a file and give the handle desired form. At the very end, the finished handle must be pulled by shallow skin. But to use varnishes and paints is undesirable. In such a simple way, you can make a knife for throwing your own hands. The drawings will make it easier for the task of choosing the necessary shape and accurate sizes.

In addition, the handle additionally equipped with a special single limiterwho does not allow to shift her hand on the blade. It is fixed immediately in front of the handle. A more simplified version is to mount small protrusions on the handle, which the hand from possible cuts will be removed.

At such a scheme, hunting blades are made, so they are more convenient to remove the skin with mining.

Manufacturing process

Each homemade knife is characterized by a length, shape and material from which it was manufactured. It is worth noting that getting cold weapons intended for hunting is quite difficult, since it is necessary to have permission. Of course, you can order it on the Internet, but, as practice shows, the product comes poor quality: the edge is stupid, the knob is inconvenient.

But self-made tools have a lot of advantages, you can note the following positive traits:

• you can choose any model, shape, dimensions and appearance of the knife;
• if desired, you can individually issue a handle;
• montage uses healthy material, which allows you to significantly save finances, and in some cases it is possible to do without investments.

The process of manufacturing any type of knife is carried out using similar technologies, and if you comply with all the rules and recommendations, the homemade blade will turn out as a factory. But it should be borne in mind that in the factory conditions everything makes cars, they will have to do the process in their own hands. First you need to take care of the tools that will be needed during operation.

Standard throwing knife has the following parameters:

• thickness - 4 millimeters;
• width - 25 millimeters;
• the length of the island is 15 centimeters;
• handle length - 10 centimeters.

All these parameters are transferred to the cardboard, and the accurate drawing is manufactured according to them, given that scale is made 1: 1.

Then, the drawing is cut and applied it to the steel plate, despite it is necessary to do so that in the zone where the blade is located, there were no "shells". They will drive the molds, after which the metal of the future cold weapons should be obtained on the metal. Now it remains gently cutting the steel product using a hacksaw, designed for work with metal.

Steel preparation processing

To get a comfortable and high-quality knife when drinking, it is necessary to leave a small supply, it will be enough to leave 2-3 millimeters. Then you can also bring the edge of the blade to complete readiness. Elaborate bars, files and others suitable for this device can be used as a grinding material. At the end of the process, a steel blade should be obtained with a thickness of at least 4 centimeters.

After that, it is proceeded with more laborious work - stooling blade to a certain thickness. To make it right, it is necessary to lay a blank in vice, securely clamp them, moreover, the clamp should occur in the zone of a narrow face of the product. That is, the thick side of the blank should look at the wizard.

It is more convenient to start the turning on the top, and after gradually moved to the opposite. It is worth noting that this process takes quite a lot of time and effort, so it needs to be prepared. As a result, you can get a magnificent knife for throwing with a thin, lightweight and sharp blade.

It is worth adding that the accuracy at this stage is optional, it will be enough to run the blade to the approximate thickness. All inaccuracies can be removed later, so you should not worry about any discrepancies.

Sharpening is an island

After the blade passes the stratification procedure to the necessary thickness, go to the next step - sharpening the steel plate. The best risk for throwing can only be obtained if technology is observed. All actions are carried out from top to bottom, while the sharpening itself is carried out only to the middle of one of the narrow faces of the blade.

Trigger movements are made strictly to the width of the entire file and so that it passes only along the waste side of the knife. After one side is made, proceed to another, doing the same manipulations.

After both sides passed the procedure of the strike, the knife should turn out, but it will be unshetable from him, since the descent was carried out only to the middle, that is, sharpening were not connected. Now with the help of the emery bar handle the second part. To do this, you need to turn one and the other side.

According to the result, it should be a sharp blade. The spout is rated not only on the side, but on top. On this, the manufacture of a metal knife is considered to be finished.

Build product

At this stage, it is necessary to connect the prepared parts. The handle of cold weapons can be simply planted onto the shank or fix it with the help of special elements - rivets.

In the first case, the product will have a more attractive view. Since the shank is made in the form of a thin rod, it often goes beyond the knob. You can correct the situation according to the following scheme:

• cut the thread on the protruding part;
• and then, using nuts, secure the handle on the shank;
• press it to the limiter.

This option of fixation allows you to make the base from the set of individual rings. Boot design will be a special nut-propeller. She can optionally give decorativeness. In the event that the shank has a small size, then it can be simply naked or glued.

The hunter must necessarily need a rifle and knife. If there is no different opinion about the use of first questions, then there are different opinions regarding the second. Some believe that the knife is necessary for achieving and cutting a shot animal, as well as to protect against the attack of the beast.

Other this item is used primarily to chop branches, cut bread, open banks with canned food and perform different economic work, and the cutting of the game is already on the occasion. Thus, it turns out that there is no universal blade. Hunting can create any man.

What is a product

Hunting knife is cold weapons with a short blade. Blade and handle are its main elements. To protect the palm of the hunter from damage at the time of applying, the product has a catcher, that is, the limiter. Homemade hunting knives look very stylish. The photos presented below are clearly demonstrated.

In order to make weapons, you need to decide first of all, with the shape of the blade and handle, choose the necessary materials, as well as set a list of tools and equipment that will be required to perform specific operations. The manufacture of hunting knives is not available to everyone.

Features of the creation of Klinka

Sketches of self-made knives

Hello, friends!

Today I want to tell about how to make various forms and designs of knives. It is known that a knife, it is not only a cold melee weapon and an indispensable hunting attribute, (I intends that I do not mention the kitchen utensils, as a domestic necessity), but also an integral part of our historical past, its pride and beauty.

In principle, an ordinary sharp piece of iron has no value. If you just sharpen a steel plate, then it will remain a conventional acute steel plate, a soulless tool of the cutting of a lively and inanimate flesh. The value of the present work of art is the soul that the master invested in its product. And it concerns not only cold weapons, but also any other human activity. Each thing made with love and inspiration laid a particle of the soul of the person himself and therefore she herself is a little alive. Ancient masters knew about it well and gave their blessing names, regarding them as a certain living substance.

In our technological time, everything is delivered to the stream: a detail to a detail, a screw to the screw and get the most necessary, but a completely soulless article. However, some irrepressible creative individuals are still engaged in the manufacture of living things. I hope that you also belong to you, readers of this article. Below I posted drawings of knives of various configurationsThrough which you can make your "live weapon". From what material to make weapons on this site already mentioned a lot, in articles, etc., but maybe someone has its own offers.

And so in these drawings there are only common sizes: length, width and height, everything else do your taste, I just want to show what form can be made knife. I know one person who is just obsessed with. He coped in twenty years a huge collection, ranging from coarse and clumsy first crafts and ending with an amazing beauty, I would not beat the word, masterpieces. Moreover, this man as he asked him, did not sell, not a single knife, and to order to do it categorically refused.

Now he is already retired, all the walls of his apartment are hungry benches on which his homemade pets are located. Sometimes he takes what kind of a knife and for a long time he considers, at times something whispering and strokes him. You do not think, he did not go roof, he is a normal cheerful and talkative old man. Just probably he really wrinkled his knives and belongs to them, as a living, but frozen in space and time beings.

The proposed drawings of knives with dimensions show that each product is individually, it is unique, and good "in its own way."

Determine with the form of the product.
The technique of manufacturing a knife is the same for any of the selected option.

This?

Or this one?

Or more?

Selection of material:

• steel, R6m5 (instrumental steel) has sufficient hardness, keeps sharpening well. You can use 65g (carbon steel) or a piece of spring steel (necessarily a clean plate without corrosion, from the former in use of the automotive springs it is worth refusing). Plate Choose in such a way that after the draft processing, the outlined circuit of the finished product is preserved
• tree (oak, nut, pear, birch, beech, mahogany and other breeds) we advise you to use in the manufacture of handles
• rivets with a diameter of four or six millimeters
• brass or bronze plate Three or four millimeters thick

Tool, fixtures:

• set of drills
• set of Files (Flat, Round)
• sandpaper (number one hundred twenty and two hundred forty)
• emery and electric drill
• clamp
• vistak and vice

If there is no workbench, you can do it yourself, my own hands, the design of one of the simple variants is described in the article.

Manufacturing technology.

1. We carry the drawing of a knife with paper on a metal plate, strictly withstanding all sizes.
2. By the selected contour, we calculate the workpiece. We make holes for rivets.
3. We deposit the cutting edge of the blade. I fix the resulting workpiece to the workbench (you can screw into the holes for rivets). With a flat file or emery, stepping metal under the desired angle (each side) to the workpiece (future edge of the blade). After the end of the draft processing, we turn to finishing using sandpaper.
4. Quenching. We are divorced in the courtyard bonfire. When a good fever was formed, put a knife harvest in the coal of the fire. The heating process lasts about fifteen minutes. Every two, three minutes pull out the workpiece for a few seconds. Steel must warm up red and cherry blossom. Check the heating readiness with a magnet. If steel ceased to attract a magnet, heating must be stopped. I lower the slowly preheated workpiece into the oil (cutting edge down) for two thirds of the blade width and keep about a minute, the oil should go out. Then completely immerse the rest. If you stopped going smoke, we remove the workpiece. It is necessary to do it without hurrying.
5. We produce vacation in a preheated oven. Heating temperature - four hundred degrees. Withstand forty five minutes.
6. Finishing. Grind and polish the blade. From the brass plate drunk oval and we do a hole under the blade shank. We make a handle from the selected wood, in which we drill holes for rivets. We collect all the details. As a collected form, grind and polish handle.

The product is ready. Applying manufacturing technology, make your own hands with a beautiful and high-quality knife.

Drawings of knives with other sizes can be viewed in the article