Combined woodworking machine D300. Woodworking combined machine D300, D400. Adjustment and adjustment of the flight device

The Russian woodworking combination machine D-300 is designed for complex treatment of joinery and simple furniture at medium power enterprises. It is possible to perform the following operations: longitudinal, transverse and at an angle of sawing by disk saw; planing (fogging) on \u200b\u200bthe plane and edge; Reysmusoving with automotive billets; Milling of surfaces of various configurations (the copying device is supplied by order) and stagnation of spikes; Drilling and milling grooves.

The Multipleration Woodworking Machine D-400 is designed for the complex processing of joinery and simple furniture at medium power enterprises.
Combined woodworking machines "D-300" and "D-400" - products of the modern technical level for complex processing of parts from various wood breeds:

longitudinal, transverse and at an angle of sawing by disk saw;
planing (fugification) on the plane and edge, as well as the replication with the mechanical feeding of the workpiece;
milling surfaces of various configurations and stagnation of spikes;
drilling and milling grooves.

It is possible to perform the following operations: longitudinal, transverse and at an angle of sawing by disk saw; planing (fogging) on \u200b\u200bthe plane and edge; Reysmusoving with automotive billets; Milling of surfaces of various configurations (the copying device is supplied by order) and stagnation of spikes; Drilling and milling grooves.

Features of the equipment:

Rigid bed and cast cast iron tables reduce vibration and provide high processing accuracy for a long time;
The spindle drive is an individual, from 3 electric motors;
The high quality of milling is provided by a vertical high-speed spindle and the clamping system (by request);
To roll the spikes, sawing across the fibers and at an angle is the permeal carriage;
The saw and milling shafts D-400 have the ability to vertical movement and when operating one other, it is removed to the extremely lower position, the hole muffles;
Reysmusing with automotive feeds through two drive shaft. When reysmusing, fugoval tables are folded down, opening convenient access to the flight table;
The drilling-domestic table moves in a horizontal plane in any direction using a lever system and vertically - screw with flywheel and handle;
For safe operation, the machine is equipped with protective devices and fences. Protective covers have nozzles for joining chips;
The machine is equipped with eccentric clauses and guides;
Additionally, the machine is recommended to install an automatic feeder (automatic feeder) model M3 Baby.

This D-400 model is most convenient and effective when working on combined machines.

Video review of the combined machine D-300:

Video equipment overview

Features of the equipment:

Rigid bed and cast cast iron tables reduce vibration and provide high processing accuracy for a long time;
The spindle drive is an individual, from 3 electric motors;
The high quality of milling is provided by a vertical high-speed spindle and the clamping system (by request);
To roll the spikes, sawing across the fibers and at an angle is the permeal carriage;
Silent and milling shafts have the ability to vertical movement and when operating one other, it is removed to the extremely lower position, the hole is muffled;
Reysmusing with automotive feeds through two drive shaft. When reysmusing, fugoval tables are folded down, opening convenient access to the flight table;
The drilling-domestic table moves in a horizontal plane in any direction using a lever system and vertically - screw with flywheel and handle;
For safe operation, the machine is equipped with protective devices and fences. Protective covers have nozzles for joining chips;
The machine is equipped with eccentric clauses and guides;
Additionally, the machine is recommended to install an automatic feeder (automatic feeder) model M3 Baby.

This model is most convenient and effective when working on combined machines.

Technical characteristics of the combined woodworking machine D-300

Characteristic	Value
The greatest width of the fugification, mm	310
Total length of fugoval tables, mm.	1520 (1700)
The greatest flight width, mm	310
The greatest thickness of the workpiece during the flight, mm	180
The greatest depth of drilling, mm	100
The greatest length of the groove, mm	100
Number of knife shafts, pcs.	1
Shaft rotation frequency, rpm	6000
Number of knives knife shaft, pcs.	3
Flow rate when reysmusovania, m / min	10
Height propyl, mm.	85 (Max.)
Diameter saw (saw), mm.	315
The frequency of rotation of the saw disk, rpm.	3450
Maximum diameter of used cutters, mm.	160
Landing diameter cutter, mm.	32
Spindle rotation frequency, min -1	6000, 8000
Mounted Total Power, kW	8,2
Nominal supply voltage, in	380
Overall dimensions, mm.	1950 x 1520 x 1450
Weight

Manufacturer of woodworking combined machine D-400. is a company TechSnab, OOO, Ivanovo. Site address: http://tehsnabstanki.ru

The company "Tekhsnab" is engaged in the development and release of woodworking machines since 1992.

D-250
D300
D-400.
D300 / 260.
D300FR
D300 F1300
D300 F2000 - The machine is divided into 2 independent machines. Eight functions
D300 F2600. - The machine is divided into 2 independent machines. Eight functions
D-400FR - The equipment does not include devices: - milling, circular saw, nipsene, drilling-domestic

D-400 Woodworking machine combined. Appointment, scope

Woodworking combination machine is designed for complex treatment of joinery and simple furniture sawing, planing (fugoting) milling With manual filing of the workpiece at medium power enterprises.

With the appropriate setup on the machine, you can perform the following types of processing:

Planer spindle (knife shaft):

planing (fugification) on a plane to 410 mm wide and up to 4.3 mm in a depth of one pass;
planing on edges (edge) at an angle from 0 to 45 °;
reysmusing one-sided boards, bars with a mechanical flow of up to 320 mm wide and to 4.3 mm in depth;
drilling, manufacture of longitudinal and transverse grooves with end mills on a drilling-domestic device.

Saw spindle:

sawing along and across the fibers of the board with a thickness of up to 80 mm at a billet speed up to 1.5 m / min;
sawing along the fibers at an angle from 0 to 45 ° using a ruler;
sawing plates, boards across fibers (terethery) directly and at an angle with the help of a tracing carriage;

Milling vertical spindle:

milling with shaped mills to Ø180 mm;
stabling spikes with shaped mills with a carriage;
curvilinear milling with shaped milling cutters (copying device by order).

Features of the design of the multifunction machine d-400

Rigid bed and cast cast iron tables reduce vibration and provide high processing accuracy for a long time
The drive of the saw, planing and milling spindles is individual from 3 electric motors
High quality milling is provided by a vertical high-speed spindle and a climbing system (commissioned)
To roll the spikes and sawing across the fibers and at an angle is the permeal carriage
Silent and milling shafts have the ability to vertical movement and when operating one other, it is removed to the extremely lower position and the hole is muffled.
Reysmusing with automatic feeding through two drive shaft, while fugoval tables are folded, opening a convenient access to the flight table
The drilling-groove table provides movements: in the horizontal plane in any direction using the lever system and vertically - screw with flywheel and handle
For safe operation, the machine is equipped with protective devices and fences: protective covers have nozzles for joining chips
The machine is equipped with eccentric clips, guides.
On the machine there is an opportunity to sharpen the cutting tool (drills, incisors, etc.), as well as flat knives with a forwarding edge for foam and cylindrical romance cutters.

Operating conditions - on open areas, under a canopy, in closed rooms, except for residential premises.

Machines must be operated under the following conditions:

Height above sea level - up to 1000 m;
Normal performance of atmospheric pressure: 865 ... 1065 GPa (650-800 mm Hg. Art.)
Normal air temperature values \u200b\u200bwhen operating the machine: + 10 ° С ... + 25 ° С
Recommended air temperature + 17 ° С ... + 23 ° С
Recommended relative humidity of no more than 75% at 20 ºС
Air humidity is allowed to 85% at +25 "C and at lower temperatures, but without moisture condensation.
Execution according to the degree of protection against moisture - unprotected

Delivery kit to D-400 machine

Machine assembly

Box D300.052

Completeness:

Separase carriage (assembled)
Billing clamp (assembled)
Corner
Strog knives (installed on the machine)
Saw disk 315x32 z \u003d 48 (supplied for extra fee)
Saw casing with sectors
Support kit (supplied for an additional fee)
Insert on the circular surface
Foreign circular device
Milling device casing
Clamp of Milling Device
Ring and milling device sheet
Milling device stopper (installed on the machine)
Guide of a planing device (assembled)
Protection of a planing device (assembled)
Drilling device (assembled)
Drilling device mounting screws
Manual

Additional devices to the machine d-400

D300K1 - quick-consuming copier for curvilinear milling;
D300FSH - Device milling presser. It is used to increase the performance of the milling unit;
auto-profile - automatic feeding device;
DS2200. - Aspiration system (chipotto).

Woodworking machines of Technologies

D300 - Basic machine. Fuggest width (flights): 310mm. Machine Machine: 650 kg.
D-400. - Basic machine. Maximum width of fugification (flights): 410mm. Machine machine: 780 kg.
D300 / 260. - Machine without vertical milling spindle. Fugging width (flights): 300mm
D250. - The machine is divided into 2 independent machines: Fuganok and flight node
D300FR - The equipment does not include devices: - milling, circular saw, nipsene, drilling-domestic
D-400FR - The equipment does not include devices: - milling, circular saw, nipsene, drilling-domestic
D300 F1300 - The machine is divided into 2 independent machines. Eight functions
D300 F2000 - The machine is divided into 2 independent machines. Eight functions
D300 F2600. - The machine is divided into 2 independent machines. Eight functions

D-400 General view of a combined machine

Stanina D300.101.051
Raysmus D300.200.001
Device Kruglopile D300.401.001.
Device milling D300.402.001
Device Nipipaese D300.403.001.
Drilling device D300.405.001

COMBINED MACHINE D-400

Stanina (D-400.101.051) Fig. 1.1. pos. one.

The bed is a welded structure that is the base for the installation of a circular over, flight, planing, milling and drilling devices. The bed is mounted on a flat rigid plane and does not require a special foundation. The exhibition of the bed is carried out in terms of the longitudinal and transverse directions by adjusting the supports. The design of the bed provides for the possibility of installing the machine to vibroopora.

Reissimus Assembly Group (D300.200.001) Fig. 1.1. pos. 3.

The "Reysmus" assembly group includes:

recycling device (D300.201.001)
strict device (D300.202.001)

Recycling device (D300.201.001)

The reissimosum device consists of a knife shaft, the feeding mechanism that is mounted on two cast-iron cheeks mounted on the bed, the lifting table is mounted directly on the bed. The cheeks also establishes a device that prevents the release of the workpiece treated towards the operating.

The knife shaft is the cutting organ of the device and is a steel cylinder with three rigal knives fortified in its grooves. The attachment of the knives is carried out by means of clamping bolts and wedges, pressing knives to the base planes of the shaft. The lower edge of the knives is based on the springs, which facilitates their exhibition and adjustment. The knife shaft rotates in two ball bearings. The torque on the knife shaft is transmitted from the electric motor installed in the grooves of the side wall of the bed, by means of a clinorem.

The belt tension is carried out by vertical movement of the electric motor in the grooves.

The lifting table is mounted in the housing and is installed directly on the bed. The rise is carried out with the help of the helm.

The mechanism of feeding the billet consists of two shafts (feeder and receiving smooth), which are driven by a lowering gear transmission. Selection of power on the mechanical feed is made from the knife shaft using the frictional (spring-loaded rubber wheel) installed on one of the shafts of the chain transmission. The tension of the chain is carried out spring-loaded asterisk.

The anti-raging device (stops) is mounted on one of the bonds of cast-iron cheeks. To install the lifting table in height, a ruler with a pointer serves to the desired processing size.

While working on a planer device, the billet feed mechanism must be turned off using a fixed lever.

Adjustment and adjustment of the flight device

Knives must be installed so that they performed 1.5 mm for the dimensions of the knife shaft. When installing, control the uniform exhibition of knives along the entire length of the shaft.

Tightening bolts holding knives, start from the middle of the wedge. Before starting work, be sure to check the reliability of the attachment of knives. By turning on the fugoval device, make sure it is normal, the right direction of rotation. It is necessary to monitor the work of the knife shaft bearings. If the temperature is raised, it is necessary to dismantle the bearings, rinse and replace the lubricant.

To regularly monitor the tension of the circuit of the billet feed mechanism and the state of the rubber coating of the frrickee drive wheel.

Note: When working on a reysmus device, fugoval tables can be rotated on the brackets in the presence of protective casing of the knife shaft.

The larrheal device (D300.202.001) Fig. 1.1. pos. 7.

The strict device consists of a knife shaft feeding (front) and receiving (rear) fugal tables, guide line and protect the knife shaft. Tables are mounted on the upper edges of the cheeks of the flight device. Tables are adjustable in height, which ensures the removal from the shavings treated with various thicknesses. The rear table is exhibited flush with the upper point of the trajectory of the knife of the knife shaft using the line and in the process of operation is not subject to adjustment.

The front desk is rearranged depending on the required chip removal thickness. The rise of the tables is carried out due to moving along the threads of the axes, rigidly related to the tables.

The guide ruler serves to direct the material being processed and for planing the edges at a certain angle (maximum angle of 45 °). The ruler is fixed by the clamp. The fence of the knife shaft is adjustable to the width of the material being processed. The electric drive is single for flights and planing devices.

Adjustment and adjustment of the planing device

Monitor the condition of the surfaces of the tables. Zadira, potholes need to be eliminated. Monitor the reliability of fixing elements of the guide line. The remaining requirements for adjustment and adjustment of the planing device are similar to clause 6.2.3. "Adjustment and adjustment of the reissimula device."

Circular saw device (D300.401.001) Fig. 1.1. pos. 2.

The circular surface device is used for the longitudinal, transverse and sawing of the material "at an angle".

The device consists of a desktop, a ruler, rotating spindle with a disk saw.

The spindle housing has the ability to move along the cast bracket guide, on which the table is rigidly fixed, and the bracket itself is attached to the bed.

On the spindle from one end there is a disk saw, which is fixed between the flanges using the nut, at the other end of the spindle, the pulley is installed, to which torque from the electric motor is transmitted using a wedge belt.

The electric motor is enshrined on the pendulum support, which is mounted on the side wall of the bed. The belt tension is made by moving the pendulum support.

The height of the propyl is adjustable by lever by moving the spindle housing over the guide bracket and fixing in the desired position.

The guide line installed on the table has the ability to move to regulate the width dug. To reflect the width scored on the end of the table, a ruler is installed.

For transverse sawing and sawing at an angle, a nipsens carriage, moving along the guide parallel to the saw plane, is used. The carriage is installed on the carriage. For sawing at an angle, the corner unfolds and fixed in the desired position.

The direction of rotation of the saw is on the working.

The disk saw is closed with a welded steel fencing with a device that prevents the release of the workpiece to the workshop.

A split knife is installed behind the disk saw.

At the bottom of the casing there is a nozzle for connecting the suction device for removing the chips.

Adjustment and adjustment of the circular saw device

Install the disk saw on the shaft and reliably climb the nut through the flange. Check the direction of saw rotation at idle. Direction of rotation on the operator. Check the reliability of fastening the proplining knife, the presence of a protective fence and its fastening. The gap between the knife along its entire length and the saw should not exceed 10 mm.

Device milling rice. 1.1. pos. 4 (nippore. 1.1. Pos. 5)

The device milling (nipped) consists of a housing that is notched to the bottom surface of the circular saw table. Pinol is moved inside the housing, in the bearings of which the milling spindle is installed. At the end of the spindle, cutters of various thicknesses and profiles are installed. For installation cutters there is a set of space sleeves. The fastening of the tool on the spindle is performed using the nut. Spindle extension to the operating position and height adjustment is carried out by manual drive consisting of a toothed pair and screw. In the working position, the spindle is fixed by a stopper.

The drive motor is installed on the inspection plate. The belt tension is carried out by moving the plate on two rolling, which are fixed after adjustment.

The change in the speed of spindle rotation is made by recking the belt on two double pulleys.

Spindle with mounted mills is closed by a casing.

In the back of the casing there is a nozzle for connecting the suction device for the chip removal. The depth of milling is controlled by the movement of the casing in the guide grooves (shown in Fig. 1.1. Milling device is not included in the machine and supplied for an additional fee).

To cut spikes uses a carriage with a table. A stubborn corner is installed on the table, allowing you to base and clamp the workpiece.

The corner has the ability to unfold, which allows you to cut spikes at different angles.

When working on a circular hardware, the spindle of the milling (nipsene) device is set to the extremely lower position, and the hole in the table is closed by a special plug.

When working on a milling (nipsene) device, the circular saw disc sawder must be installed in the extremely lower position and securely fixed, and its protective casing must be removed.

Adjustment and adjustment of the milling (nipsene) device

Lower the circular saw of the circular saw device to the extremely lower position and secure securely.

Remove the plug on the table and push the spindle to the operating position. Set with the help of sleeves milling (cutter) on the spindle and securely pick up the nut.

Install the fencing with the guide strip (during milling) or without it (when cutting spikes) and adjust the required size. Securely secure the fence. Milling (cutter set) by moving the spindle to install on the required size in height, pinal fix.

Check the direction of rotation of the cutter at idle.

Direction of rotation on the operator.

Device drilling rice. 1.1. pos. 6.

The drilling device is used to drill holes and milling grooves, samples.

The drilling device consists of a table mounted on a bracket that is rigidly fixed on the cheek of the reysmus device.

The table has the ability to move: vertically "up - down", horizontally along the axis and perpendicular to the axis of the cutting tool. Moving the table is carried out: in height screw with flywheel and handle, in the horizontal plane using the lever.

On the table there is a basic focus for the workpiece and the fitting device of the workpiece.

Adjustment and commissioning of a drilling device

The drilling cartridge (the package is not included) to install on the conical end of the knife shaft, the flight device, and secure the screw.

Check at idle direction of rotation of the cartridge.

Install the cutting tool in the cartridge and clamp.

Check the radial battery of the tool. If there is more than 0.1 mm, replace the tool.

Make sure the reliability of the workpiece clamp.

At the end of the work tool from the cartridge to remove.

Scheme Electrical Woodworking Combined Machine D-400

Woodworking machine D-400. Video

Machine d-400 in work

Specifications of combined machine D-400

Name of parameter	D-250	D300	D400.
Fuggery (planing)
The greatest width of the fugification (planing), mm	250	320	410
The greatest depth of the removable layer in one pass during planing, mm	5	4,3	4,3
Diameter of the cutting part of the knife shaft, mm	75	70	70
Rotation rate of a knife shaft idling, rpm	4000	5600	5600
Sizes of planing knife, mm
Number of planing knives	3	3	3
Width of planing tables, mm	250	320	410
Total Length of Planer Tables, mm	1100	1420	1420
Pleismus
Maximum and minimum billet thickness during flights, mm	190..5	180..5	180..5
The smallest length of the processed workpiece during the repizations, mm	300	300	300
The feed rate of the workpiece in the mode of reissimus, m / min	6	10	10
Dimensions of the working surface of the flight table, mm	252 x 600.	320 x 550.	400 x 650.
Maximum width of flights, mm	248
The greatest thickness of the cut layer during the flight, mm	2,5
Lifting height of the flight table (maximum height of the workpiece), mm	195	180	180
Sawing. Kruglopile device
Range depth range, mm	1..70	1..80	1..80
The largest diameter of the saw disk, mm	Ø250 x 33 x 3	Ø250..ø315	Ø250..ø315
Landing diameter saw, mm	32	32, 50	32, 50
Saw thickness, mm	3	2	2
Saw rotation frequency, rpm	4500	3500	3500
Dimensions of the working surface of the saw table, mm	980 x 470.	750 x 500.	750 x 500.
Sizes of the end carriage, mm	400 x 250.
The move of the end carriage, mm	1080
Vertical milling. Milling device
Vertical spindle movement (the largest thickness of the material being processed), mm	80	80	80
Landing diameter of milling spindle, mm	32	32	32
The largest diameter of the cutter, mm	144	180	180
Rotation frequency of milling spindle, rpm	4500 / 6500	6000 / 8000	6000 / 8000
	980 x 470.	750 x 500.	750 x 500.
Dimensions of the working surface of the nipseral carriage, mm	250 x 400.	335 x 450.	335 x 450.
The greatest move of the carriage, mm	1080	900	900
Drilling. Milling terminal milling
The largest diameter of the drill, cutters, mm	16	16	16
Drill rotation frequency, cutters, min	4500	5600	5600
Dimensions of the working surface of the table, mm	365 x 150.	450 x 250.	450 x 250.
Depth of drilling, mm	100	150	150
Longitudinal stamp table, mm	150	150	150
Electrical equipment machine
Ring current supply	220V / 380V 50Hz	380V 50Hz	380V 50Hz
Number of electric motors on the machine, pcs	3	3	3
Planing motor, flight, drilling device, kW	1,5	2,2	2,2
Electric motor circular saw device, kW	1,5	3,0	3,0
Motor vertical milling device, kW	1,4	3,0	3,0
Total power of electric motors, kW	4,4	8,2	8,2
Gable and machine weight
Gasparrit Machine (Dlann x Width x Height), mm	1260 x 1140 x 970	1660 x 1500 x 1100	2050 x 1560 x 1100
Machine Machine, kg	304/355	650	750

The following operations are performed on the machine:

Longitudinal, transverse and at an angle of sawing by disk saw;
Planing (fogging) on \u200b\u200bthe plane and edge;
Reysmusoving with automotive billets;
Milling surfaces of various configurations (copying device by order) and spikes;
Drilling and milling grooves;
Stanted bed and cast cast iron tables reduce vibration and provide high processing accuracy for a long time.
Spindle drive individual from 3 electric motors.
The high quality of milling is provided by a vertical high-speed spindle and a climbing system (by order).
For spikes and sawing across the fibers and at an angle serves a permeable carriage.
The sawmill and milling shafts have the ability to vertical movement and when operating one other, it is removed to the extremely lower position and the hole is muffled.
Reysmusing with automatic feeds through two drive shaft, while the fugoval tables are folded, opening convenient access to the flight table.
The drilling-groove table provides movements: in the horizontal plane in any direction using the lever system and vertically - screw with flywheel and handle.
For safe operation, the machine is equipped with protective devices and fences: protective covers have nozzles to attach chips.
The machine is equipped with an eccentric clamp, guide rules.

Technical characteristics of machine tools D300, D400:


Naib width of fugification and flights, mm
Naib Lamp thickness, mm
Length of fugoval tables, mm
Feed rate during flights, m / min.
Naib Depth (drilling) and length (groove), mm
Rotation rate of the knife shaft (drill), rpm / min.
Naib thickness when sawing, mm
Diameter of disk saw, mm
Frequency of rotation of the saw shaft, rpm. / Min.
The diameter of the milling spindle, mm
Naib Diameter of installed cutters, mm
Rotation frequency of milling spindle, rpm. / Min.
Number of electric motors, pcs
Total power, kW
Gabritis, mm.	1950x1520x1450.	2050x2080x1450
Mass, kg.

ADDITIONAL OPTIONS:

	Advantages of installing an automatic feeder: Uniform and fast filing of the workpiece into the processing zone that excludes the "human factor" and as a result, improving the quality of processing and reducing the number of cutting tools. Increased performance as a separate machine and the entire technological chain of equipment. Reducing injuries, which makes it possible to allow working on a larger qualification operator machine.

	Designed to expand the technological capabilities of combined modes mod. D300, D400, and can also be used on any milling machine with a vertical arrangement of the spindle, equipped with a clip-carriage of any design. Table dimensions under the template: 250x600 mm. Depth of the curvilinear profile: 180 mm. The length of milling corresponds to the start of the carriage of the machine. Number of clamps 2 pcs.

	It is used to increase the performance of the milling unit. To ensure safety and increase productivity, the material being processed is pressed by spring-loaded rollers on top and side. On the device installed movable vertical cheeks for more accurate adjustment of the thickness of the cut layer.

Features of the equipment:

Rigid bed and cast cast iron tables reduce vibration and provide high processing accuracy for a long time;
The spindle drive is an individual, from 3 electric motors;
The high quality of milling is provided by a vertical high-speed spindle and the clamping system (by request);
To roll the spikes, sawing across the fibers and at an angle is the permeal carriage;
Silent and milling shafts have the ability to vertical movement and when operating one other, it is removed to the extremely lower position, the hole is muffled;
Reysmusing with automotive feeds through two drive shaft. When reysmusing, fugoval tables are folded down, opening convenient access to the flight table;
The drilling-domestic table moves in a horizontal plane in any direction using a lever system and vertically - screw with flywheel and handle;
For safe operation, the machine is equipped with protective devices and fences. Protective covers have nozzles for joining chips;
The machine is equipped with eccentric clauses and guides;
Additionally, the machine is recommended to install an automatic feeder (automatic feeder) model M3 Baby.

This model is most convenient and effective when working on combined machines.

Technical characteristics of the combined woodworking machine D-300

Characteristic	Value
The greatest width of the fugification, mm	310
Total length of fugoval tables, mm.	1520 (1700)
The greatest flight width, mm	310
The greatest thickness of the workpiece during the flight, mm	180
The greatest depth of drilling, mm	100
The greatest length of the groove, mm	100
Number of knife shafts, pcs.	1
Shaft rotation frequency, rpm	6000
Number of knives knife shaft, pcs.	3
Flow rate when reysmusovania, m / min	10
Height propyl, mm.	85 (Max.)
Diameter saw (saw), mm.	315
The frequency of rotation of the saw disk, rpm.	3450
Maximum diameter of used cutters, mm.	160
Landing diameter cutter, mm.	32
Spindle rotation frequency, min -1	6000, 8000
Mounted Total Power, kW	8,2
Nominal supply voltage, in	380
Overall dimensions, mm.	1950 x 1520 x 1450
Weight