Interior decoration of the house of wood. All available options for the internal decoration of a wooden house. Wooden houses inside on photo decorative wall decoration in a rustic house

The final stage of construction is the decoration of a wooden house inside, and in this case help the owners decide on the style of the future dwelling can be a photo, but to choose materials will be independently, as well as to hold a number of preparatory work. Wood makes special requirements for subsequent decoration, so when carrying out internal work, its properties and characteristics should be taken into account. In addition, you should not forget that the wooden house is not only beautiful and warm, but still has a special energy. Its design from the inside can either emphasize the unity and harmony with nature, creating an atmosphere of a unique coziness, or to be up-to-date, but it is no less comfortable.

When should be carried out on interior decoration

The inner finish of the wood house should be carried out only after the main shrinkage is held (this concerns only the "fresh" log cabins). At this stage, an active destruction of the tree occurs, the bar or logs change their dimensions in a smaller side, and the insulation is pressed. If the inner finish is made to the end of the shrinkage, then as a result, you can get a curved coating, which can also fall off and have to start again.

The duration of shrinkage is influenced by:

Design type of house.
Material (timber, log, etc.), its initial humidity.
Climatic construction zone.
Construction time.

In particular, the house of glued bar gives the main shrinkage after 3-4 weeks after the construction, it is the fastest time. Other types of wooden houses require a shrinkage for several months and even years. On average, the finish inside the house can be started only 10-12 months after the end of the construction itself.

By building a house from a tree, most likely, you wanted to do anything natural and natural in its interior decoration. At the same time, you should not forget about the beauty of the interior, which can be created from the most common materials, with certain knowledge.
The decoration of the walls of a wooden house from the inside may become a truly exciting occupation. In this article we will tell you how to transform the appearance of your "fortress".

As in all the works, this also should be followed by a certain sequence.
Violation can significantly affect the appearance of the design:

Before starting the installation of any material, it is necessary to pre-process the walls. Remember that the tree is a material that is afraid of moisture, mold and insects.
Plus, build houses from wood will not create perfect protection from cold and draft.
All the gaps are clogged with packs or moss, which will create a heat-insulating barrier, and reduce heat loss to 40%. If you plan to sow walls and ceiling with framework structures, it will allow you to mount additional layers of hydro, heat and vaporizolation.
If the frame will not be, then insulating processing, you can perform with mixtures, mastic and impregnation. Resistance to fungi and insects is achieved in a similar way, with special antiseptic solutions.
Such processing of wood, originally eliminates you from the problem of the appearance of rodents, which is very important for the country house.
Many materials combine listed properties simultaneously. It will save you from the need to perform the same works many times.
All the measures listed above will increase the service life of your repair, and at home as a whole, and create a favorable climate for its inhabitants.

Materials for finishing

Today the market presents a great set of materials. It will be very difficult to understand them in an inexperienced person, but it is impossible at all.
Therefore, we will try to make the most detailed analysis of all common options:

One of the most affordable ways is to finish the walls of a wooden house with plasterboard. This material enjoys unprecedented popularity today.
It is unpretentious and easy to handle, durable and flexible at the same time. There are even moisture-resistant and refractory sheets (GLVO).

Another advantage of using this material is that you get perfectly smooth walls and ceiling. And all this for quite reasonable money.
The average price of one square meter of plasterboard, you will cost you about 100 rubles (without taking into account the cost of the frame).
To spend money on the frame, you may not have to do, since the wooden house has many wooden beams, and it can be a frame type at all, which simplifies the process of plasterboard installation. In this case, a set of tools required for installation is reduced.
All you need is a screwdriver, a tree hacksaw and an ordinary stationery knife.

It is very important that when creating frames, you have the ability to hide all technical nodes, such as: elements of the heating system; ventilation, wiring; Water and sewer pipes; Unnecessary floors that do not carry any aesthetic value.
Also, the free space under the mainstream is well ventilated, which relieves you from excessive dampness. In addition, you can create niches, embed lighting devices, household electronics and even air conditioning.

Lining and plywood

The decoration of plasterboard walls of a wooden house is a profitable and simple, but there will always be people who ask: "And where is the natural appearance? Where is unity with nature?
We built an ordinary city house! "
In this case, natural materials will come to your aid:

One of the most common and beautiful options is the walls of the walls. The lining is a stranded wooden panel having a fastening system Comb - grooves.
Standard panel width is 96 mm, length ranges from 2 to 6 meters.

The lining can be several species that differ from each other from the profile of the board, thickness and width of the working surface. Note the most common.
Standard is a regular board with straight chamfer (see photo above). Block house - a wider board, made in the form of a rounded timber. Brusal imitation - the name speaks for itself.
This species is also wider than standard.
The entire lining is divided into four grades of quality: "Extra", "A", "B" and "C". From the best to the worst. Also pay attention to the variety of wood.
On the properties of each variety separately, you can find additional information on our website.
Installation of lining to a wooden base is also quite simple. From the tools you need a screwdriver and electric jigsaw.
The boarding of the board is carried out using a secret metal kleimer, fixing the usual wood screws.
The decoration of walls plywood in a wooden house is another way to achieve an excellent appearance and functionality using materials made of wood.
Let the plywood not so environmentally friendly as the lining, but its basic properties are not inferior to natural wood. This material can easily sow large areas.
The main thing is to remember, choosing Phaneru - it's all the same omnipresent moisture. If you are not isolated the room from leaks and condensate, then be prepared for the appearance of dark spots and divorces, and with time, plywood in these places will be rotated.
Therefore, approach the finishing question with the mind. Not only appearance, but also functionality of the room is important.

Take a look at the image above, and you will understand that even rough trim plywood with seams can complement the overall style and create an original look of the room.
This room implements all the advantages of frame construction from wood. We see a lot of niches (see Kak to separate a niche in the wall and in the partition), racks and shelves.
Built-in lighting visually divides the space on the zone, and it advantageously emphasizes each of them.
The long wall is separated by clapboard, and in its center there is a cloth of the screen for the projector. He himself was sheltered on the carrier beam, which is also decorated with plywood.
The floor is also sewn and floor, but the laying is already produced more thoroughly, without obvious seams.

Previously, the house was built preferably from the tree. Today, the material gave most of the positions of brick, concrete and other modern counterparts. But still, many houses still erected from wood. This is facilitated by many reasons:

the tree is cheaper than, for example, concrete;
the material is natural, and, it means environmentally friendly;
brux, brica and other types of treated tree weigh a little. For them, it is not necessary to cause an lifting faucet, such as for concrete blocks;
tread strength sufficient for transportation and for the building itself.

All this contributes to the construction of houses from a tree. In addition, there are many old houses from the same material. Like other buildings, there are features in many nuances - for example, in the interior decoration. If this case is wrong, a high probability of re-conducting works appears. In addition, those finishing materials are suitable for such houses that are not so appropriate in other cases. However, about everything in order.

When you can start the finish

Some owners can begin the decoration of a wooden house inside already immediately after its construction. In fact, it is impossible to do this. The tree gives shrinkage, and not immediately, but for a certain period, sometimes quite a long time. Thus, the inner finish of the house of glued timber can be carried out in 3-4 weeks. In most cases, this period is from several months. For example, a log house can be separated in a year. Some at home and at all are separated in a couple of years after the construction, although complete shrinkage can last two and a half times longer.

What to do during these months? The owner of the house will be a lot. For example, you need to cross the joints. For the first time, this is done a few weeks after the construction of the house, next - in 6-8 months. It is also necessary to take care of wood processing so that it does not rot and damage insects, and conduct communication (pipes, electricity, etc.). After the second cacopa, it is necessary to measure the height of the walls from time to time. If in a couple of months, the results do not decrease - the shrinkage ended. Now you can proceed to the interior of the house.

Materials for finishing walls inside the house

Consider the most popular ways to finish a wooden house. In each of which certain materials take part.

Lucky and paint

By itself, the log house looks beautiful. Therefore, the decoration of the inner walls of the house from the tree is not so obligatory. If the log house is well protected from weather influences (rains and winds), the walls can be simply covered with paint materials.

To begin with, the log house should be polished. Now you can proceed to applying material. For the floors, the lacquer will fit well: it does not allow longing the coating for a long time. For walls and ceilings, you can choose, for example, tinting antiseptics.

Materials need to choose carefully, learning both the advantages and disadvantages of each of them. Here are some options of varnishes and paints:

oil: eco-friendly, dust do not attract, but dry about three days; In addition, over time, the tree covered with such analogue begins to yellow;
alkid: There are few, protected from the impact of moisture and the appearance of fungus; But a day will dry and a long time to make an unpleasant smell;
polyurethane: resistant to wear, dry quickly (about two hours), are expensive and have large toxicity;
nitrate: create a beautiful appearance (not least due to the wide range of colors), pretty quickly dry, but toxic; Also, the ecology of the tree suffers from them;
acrylic: environmentally friendly, give a wooden coating to "breathe", impede burnout, serve for a very long time; On the other hand, the price of materials is considerable.

What is the good one? Paintworks are not so expensive, so finishing. In addition, they emphasize the natural beauty of the tree. True, the legitimate seams that can spoil appearance remain open. Here, a twisted cord can come to the rescue that these very seams are stuck. Another problem is communication. In this case, the wiring is better carried out at the corners and sex; Pipes (for example, plumbing) can be hidden by trimming a wooden frame.

Paintwork is short-lived, so it needs to be updated every few years. However, the finish may be bored, and re-staining will cost cheaper than replacing, for example, wall panels. Another disadvantage is a possible disturbance of the walls after shrinkage: the finish can hide this deficiency, and varnishes and paints are not.

Lining

If you want to separate the inner walls of the house, but keep the originality that creates a tree, you can choose the lining. This is a dried and treated edge board, which is connected by spikes and grooves. Thus, the house remains completely wooden with all the ensuing advantages. By the way, they can be listed:

environmental friendliness;
beautiful appearance;
ease of installation;
nice wood fragrance;
good heat and noise insulating properties.

Well, and for justice it is worth mentioning about the disadvantages:

low fire resistance;
the need for periodic painting.

Some here also attribute a high price. True, many will say that the lining, on the contrary, is cheap. Right and those and others. The fact is that the lining has four classes:

Extra class. This material has a perfectly smooth surface without any bitch, holes, etc. Such lining is great for the walls of the walls, but it is more expensive;
Class A. Defects are already allowed here, but quite a little;
Class V. On such wood, the number of defects are greater than in the previous case;
Class C. This lining has the greatest number of defects like bitch, cracks, etc. It is worth it cheaper, but you need to choose the boards carefully not to acquire a marriage.

Wood for lining is used very different. Here are just a few species:

pine: a good tree, not subject to rotting, is easily processed (since it has few knots);
alder: It has a beautiful color and aroma; But it is worth such lining expensive;
oak: Very durable and tight material, famous not only in the finishing segment. So, the furniture created from this tree of wood is very valued;
spruce: It keeps very well warm, but actively absorbs moisture. Therefore, it is better to separate such lining to separate the dry premises.

In addition to the usual, there is still Eurovantia, which meets European standards. But this is not the only difference. So, the EuroVariant is made of a dry lap board (the usual dry in natural conditions) has a deeper puzzle joint and other parameters. Also in the Euro woman there are ventilation grooves, which are dismisted condensate, thereby preventing the processes of rotting. The material itself is characterized by higher quality, since the requirements for manufacturers are pretty rigid. The price of Euromathere, is understandable, above, but also the operation of such a lining is longer and high-quality.

Plasterboard

This material for finishing walls inside the house is also considerable popularity. And that's why:

plasterboard is inexpensive;
sheets weigh a little and have a convenient form, which simplifies installation;
the finishing material increases the heat and sound insulation of the walls;
in such a wall, it is convenient to make the shelf, niche, hindow the lamp;
the surface provides for the possibility of finishing finish. So, it can be painted, caught with wallpaper, paint, etc.;
material is environmentally friend, and, it means safe for health.

However, to separate the wooden house with plasterboard is not so easy. And all because of the shrinkage of the house, which, as you know, can last for quite a long time. If, for example, it is possible to paint the walls almost immediately, then quick installation of drywall almost always provides for loss of quality. Here it is better to trust the experienced master, which and the calculations will spend, and the sheets will correctly secure.

There are several plasterboard options that are used in the finish:

traditional (mounted only in dry rooms);
moisture-resistant (on it, by the way, does not apply to the fungus);
fire-resistant (which is very important for houses from the tree);
combined (good suitable for wooden rooms with high humidity).

One of the secrets of the trim plasterboard is a mobile frame that moves with a shrinkage of a tree. Due to this, the seams between the sheets are not cracking. However, the creation of such a system requires the necessary skills, therefore it makes sense to hire specialists. Yes, it will attract additional spending, but the confidence that the finish will remain a whole, there will be more.

In order to wake or plastering the drywall layer, the sheets need to be projected. If you just want to paint the walls, they need to just paint. The color of the paint is chosen on the basis of the desired background.

Wall panels

Another pretty interesting material for finishing wooden walls inside the house. The main advantage is that the panels are made from various materials, which makes it easy to choose what you need. By this criterion, they are divided into:

wooden, such a decision is suitable for those who want to hide the walls, but not to disturb the originality of the room by another material. By the way, the lining, in fact, is also a wall panel, but is considered as a separate species;
from MDF (veneered or laminated);
glass;
polymer;
leather

Installation of panels is also different. You can install them vertically, horizontally, the Christmas tree, diagonally. The last way, however, is extremely rare, but in this way you can create an original appearance. Create a beautiful design can also form the components: so, the glass panels reach certain results using corrugations or smoothness, the presence of color or transparency, etc.

Panel sizes can differ significantly depending on the species. Thus, the rush species can reach 4 meters in length, but the width does not exceed 30 cm. Such panels are usually attached using a spike-groove system and provide for the presence of a dory. Tile panels also have different parameters, ranging from 3030 cm, and ending with meter squares. Such elements are well to lay out original drawings. But with the leaf panels, the finish is faster thanks to large sizes. Here the installation is already carried out with the help of glue.

Outcome

This is what the main list of materials for the interior decoration of the private house is made of wood. Each of them has its own characteristics and advantages:

lucky and paints allow you to leave a wooden wall in plain form;
the lining hides all the flaws of the wall, but leaves the tree to the dominant material;
plasterboard allows you to salary or paint the wall;
wall panels create an original design.

Based on the advantages, disadvantages and characteristics, everyone chooses what is more suitable to taste. Of course, it is not very simple to separate the wooden house: so, because of the shrinkage of the material of the wall can be spoiled. In addition, you need to follow fire and moisture resistance, because the absorption of moisture can destroy the tree, and the ignition will destroy a similar house with a much greater probability than, for example, brick or concrete. But still, the advantages that this natural material has contribute to the construction of wooden houses to this day, and, it means, their interior decoration remains a very important issue.

In conclusion, it can be advised to follow modern trends, because some finishing materials can be outrage (although not fact), during which time new, modern analogues are born. And the fact that they will appear - a practically indisputable fact, since houses from the tree, apparently will be built until the world is.

It's no secret that the house of wood is most adapted for permanent residence primarily due to its absolute environmental purity. In the summer, in such a house is cool, and in winter warmth. The heating of a wooden house, as a rule, takes less energy than to build a stone or concrete.

The wooden structure breathes especially easy, and many diseases are forgotten, it is necessary to cross the threshold of your own house from a tree. Now the tradition is returned again from natural environmentally friendly materials. In the first place of course a tree.

The indoor interior is no less important than the facade

When building any house, special attention is drawn to how it looks outside. And if the facade is decorated for universal ferris, then the inner interior is important, first of all, from a functional point of view and "decorations" here can be superfluous, many are considered. But it's not at all.

The interior decoration of the wooden house is important from all points of view. There are many beautiful and, at the same time, the highest degree of functional finishes.

On numerous sites, you can see the photo of the beautiful decoration of the wooden house and choose the most acceptable option for yourself. As a rule, beauty here is equal to the concept of comfortable accommodation.

The better to separate the wooden house from the inside

As you know, wooden buildings with sufficient durability are still not so steady tolerance of the weather. Therefore, such a house outside is taken to separate more resistant modern, including synthetic materials. The inner interior is definitely the best to separate wood. This is primarily important from the point of view of ecology.

In the house, finished with a clean tree to live much more comfortable. However, the use of wooden arrays will significantly increase the cost of finishing a wooden house. This must be taken into account when designing.

The costs of such a finish can significantly exceed the cost of construction itself. Therefore, sometimes it is advisable to resort to no less functional, but cheaper finishing materials from the composite tree.

It is also permissible to use modern composite materials using synthetics. Natural arrays include details made entirely of wood.

The most common lining from various wood breeds.

Most often, lumber from pine, spruce and birch are used for decoration. Such lining is quite simple both in the manufacture and use when finishing. It looks organically almost in any, even the most modern interior.

The cheaper includes composite finishing materials made of wood. In this case, the foundation of the finishing element is made of less valuable wood, and the facial part is decorated with expensive or even exotic rocks.

Combined finishing materials are often used, when the basis is the synthetic materials, and the facial part of natural wood species. In many cases, completely synthetic finishing materials are also applied.

In any case, it is necessary to take into account that the use of synthetic materials in a wooden house is less advisable than in the city apartment. Again, for the consideration of the greatest environmental safety.

Finishing with your own hands

So, consider how to finish a wooden house with your own hands. A tree is just the material with which almost everyone can cope with who wishes to separate their dwelling on their own. Traditional lining to everyone on the shoulder, although it will require a lot of time and accuracy in work.

But the result will be many years of comfort without constant change of the interior in pursuit of fashion. Conservative wooden finish does not leave fashion ever.

It is also enough to simply separate your home and composite materials using valuable wood species. Such a material will not be much more expensive than solid lumber, but will give the opportunity to diversify the interior and make it exquisite.

It is possible to use modern synthetic materials, but it does not need to overdo it, if you decide to pay special attention to ecology.

It is also possible to separate the inner interior of a wooden house and traditional plasterboard, if necessary, aligning walls, which is difficult to achieve exclusively wooden structures. But then all the charm of contact with a tree, both visual and physical contact, will be lost.

Any unnatural material will not give the same warmth and comfort, like any of the most freaky wood. It is also necessary to take into account that the wooden house changes its dimensions depending on the time of year and humidity, which does not occur with the buildings from brick or concrete.

Oscillations can not be attributed to the category of critical, but still they are. If you apply a wooden finish for a wooden house, then these oscillations will be compensated by the homogeneity of the materials and will not rush into the eyes. And for synthetic materials or drywall, it is necessary to take into account during construction and especially interior decoration.

It is necessary to provide additional compensating gaps so that the plasterboard does not crack over time, which happens quite often in wooden houses. There is no specialist without specialists.

Additional calculations are always extremely important, taking into account the specifics of the tree when applying heterogeneous materials for finishing.

Why do everything on your own

There are many ways to make a finish with your own hands. Each owner should always find a compromise between desires and its financial and physical abilities.

You can always refer to the specialists, but without a doubt everything is done with your own hands at times is valued more expensive than the work of even the most experienced master.

In your house, we always do everything from the soul and for yourself, even if not everything works like a real professional. You can hire specialists, but then there will be no opportunity to say: "But I did it myself!"

Nature will always help in matters of ecology and beauty

It is worth emphasizing that any natural finishing material can be considered environmentally friendly and healthy. Therefore, the finishing of the house inside can also be made and natural stone without restrictions, which also looks very beautiful. Here the fantasy flight is unlimited.

And if there is a sad boulder not far from your house, bring at least one pebbles home, put it near the empty wall and you will see how the stone itself will be transformed, and the interior of your home will be promoted.

If you live in a house of stone or concrete, bring any even a non-zero area from the forest and again you will see how your home will be transformed. The house will be much cozy and warmer.

Stock Foto Wooden house finish (inside)

A private house built of wood can not always be considered a complete structure, since in many cases it requires an outer and interior decoration of the walls. There are many different options, but not all of them are suitable for the obstruction of this kind of buildings. In this article we will look at what you can see the wooden house inside and outside and how it is better to make it yourself.

When you need to sow a wooden house

To begin with, it is necessary to highlight those buildings that initially does not make sense to somehow sow outside, and even more so - to make insulation. Whatever finishing option you choose, it will not cost cheap, and therefore it is inexpedient for wooden summer or periodic living houses. As for the decoration of the dwelling from the inside, it is rather a question of the design and wishes of the homeowner than the need. After all, wooden walls from a bar or a rounded log always look attractive.

Now we present cases when wearing wooden houses are made from the outside:

there is a good and strong log house in stock, but the old enough, which is why the appearance of the building leaves much to be desired;
frame buildings from wood need to be awarded anyway on both sides, such is their design;
if the wooden house built from a bar or log needs additional protection and insulation of the walls.

Often there are chopped houses, previously stood up for more than 50 years and ready to serve as much as much. Additional cladding from the street will not only allow to change the appearance of the dwelling for the better, but also protect wood from precipitation and in such a way to extend its service life. The same protection does not prevent the walls in need of insulation. Since the thermal insulation is accepted from the outside, and not inside a wooden house, then the insulation must be hidden behind the hydrobarier and lining, which will be discussed.

Council. The exterior finish of a wooden house, which has just been built, is produced after 1 year. The shrinkage of the buildings of this type is quite significant, as a result of which the external design of the walls may suffer and will have to redo it.

Materials for outdoor and interior decoration

Despite a wide selection of facing materials, their list for houses made of wood is somewhat limited due to different reasons. For example, it is relatively inexpensive to separate the house with the help of plaster, but this method is suitable only for frame buildings, covered with from outside the OSB sheets, as shown below in the diagram. Stacking the same log cabin or housing from the bar will be problematic.

As can be seen in the diagram, the base insulation from the Minvati, located inside the wall, is complemented by a layer of foam or polystyrene foam attached to the OSB plywood sheets. And after the apparatus decorative plaster is applied. But such a finish of the facade is a rarity for a wooden house, the following materials for external plating are more common:

vinyl siding;
siding from a tree, the so-called Block House;
lining;
comprehensive system "ventilated facade".

For reference. Cheaper and faster to see the walls of the house with a painted professional flooring, such a practice also takes place. But at the same time the design of the building looks at all cheaply and reminds of a production building. In addition, the professional flooring quickly burns into the sun and loses color. Is that you get a dear coated material in the form of a pattern, as in the photo:

Vinyl siding is a very popular material, it is relatively inexpensive and long retains the appearance, moreover, it is quite possible to seize the wooden house on its own. It will be more expensive to separate the walls with other siding - imitation of a bar and a rounded log called "Block House".

This is a very attractive and pretty material, but requiring care, as well as the usual lining of wood.

If we talk about that the best thing to sew a wooden house without binding to the value of materials, then out of competition - the system "ventilated facade". It is a frame of galvanized profiles, inside which the insulation is attached, and outside the decoration elements. Moreover, the latter can look like siding, brick or natural stone - to choose from. True, the system is difficult to call cheap, and with installation, not every homeowner will treat.

It is easier to solve the question than to separate the walls of a wooden house from the inside. For this purpose, the most often applies:

ordinary and moisture-resistant plasterboard;
oSB chip;
ordinary sheaving boards - lining.

Gypsum and OSB are an excellent basis for the device of any finish layer - various wallpapers, tiles and other materials. Moisture-resistant GLCs are perfectly suitable for the inner lining of the bathroom, and the lining - for the bathhouse built into the house. OSB plates are used inside buildings not as often, as plasterboard is much more environmentally friendly.

A few words about the insulation used. It is well known that houses built from wood should "breathe". This means that the material of the walls is transparent for vapors, thanks to which the moisture from the inside of the premises is displayed outside, passing through the wood. If on their way to put a steamproof barrier, then in front of it moisture will be condensed, which will lead to gradual destruction of the fence. Therefore, it is not recommended to apply water-repellent polymers such as foam or foam.

The best solution for insulation when finishing a wooden house - mineral or basalt wool. It is vapor permeable and absolutely not susceptible to burning.

The exception to the rule is a frame building, where the Minvati layer is part of the enclosing structure, and there is no major wall. Here, the insulation protects against the vapor penetration on one side and waterproofing - on the other, as depicted in the scheme:

Wooden House Siding

This external finish of the house can be performed both with insulation, and without it, if necessary. But with any scenario between vinyl siding and the wall, it is necessary to provide an air layer for ventilation. Its problem is the removal of moisture that falls from the outside to the diffusion membrane, which plays the role of hydro and winder. That is why the blades of vinyl siding are not attached to the walls directly, which even they would be. Initially, it is necessary to assemble a crate of wooden bars, less often - from galvanized profiles.

Council. Before the trimming of the old chopped house, it is necessary to make a prematurely to cross the slits between the logs, using natural materials for this - felt, passion or moss.

The width of the bars for the crate when the external decoration device without insulation should be from 3 to 5 cm to provide an air layer. The interval between the rails is 40-50 cm. But the first thing is the diffusion membrane, it is capable of missing pairs, but reflect water. The membrane canvases are styled horizontally, starting from below, with an adhesive of 10 cm and skinning on the joints of scotch. After that, it presses the bars or profiles of the crates installed vertically.

Note. If you plan to install vertical siding, then the bars should be attached horizontally. Previously, they should be treated with antiseptic composition.

Also, the shapes of the crates are framed all openings - windows and entrance doors. At the same time, wooden elements are better to nail with nails, and not to screw themselves with self-draws. The latter do not give structures the ability to move during shrinkage or thermal expansion. Important moment: the surfaces of all bars should be strictly vertical and calmed in one plane. Now you can proceed to the installation of siding, using the starting and other types of the planks shown in Figure:

When fitting siding, it is important to take into account its thermal elongation, so the ends of the vinyl bands should not be resting in the nests of the angular slats standing on the sides (meaning horizontal installation). Strips need to be cut off and insert between slats with a gap of 3-5 mm, and nails do not score until it stops. In order, the oval holes are made in the siding so that the strip can move a little. By the way, the installation is conducted from the starting plank - from the bottom up.

When the lengths of the 1st band are not enough to cover the entire wall of the wooden house, then you need to put one or more connecting planks, placing them as aesthetically as possible. Although siding is allowed to lay an overlap (without a plank), but it looks like this connection is unpleasant, and therefore it is worth it to apply at least in the extreme case. Well, for the framework of windows and doors there are special vinyl plates.

If the finish process is decided to combine with insulation, then the installation of thermal insulation material is also included. Considering its thickness (at least 100 mm, and in the northern regions and all 150 mm), it is necessary to take bars for the crate of the corresponding width. Moreover, the membrane is not immediately on the wall, but on top of the insulation. It is fastened by navigating the controls with a thickness of 30 mm from above. Further work is made in the same way as described above.

Wooden House Finishing Block House

In essence, the Block House for the Treatment of the House is the same siding, only made of wood, and the work algorithm applies the same.

True, there are a number of differences in which we will sharpen your attention:

there are no starting, angular and connecting planks. All joints will have to fade outside the shaped elements of the tree;
the bands block of the House are sliced \u200b\u200bstrictly into size, and in the formation of internal and external angles, the material is cut at an angle of 45 ° for docking;
the attachment of the canvases is carried out from the bottom up on nails or special beams. True, the latter have to be blown and the bands can fall out over time;
with horizontal orientation, the board is better to install spike, and the groove down.

One of the most complex nodes is the adjoining of the facing in the form of an inner corner. Of course, you can not pay attention to the formed clearance and decide the angle of the shaped element. But that the covering of a wooden house Block to House, made by their own hands, was high-quality, it is necessary to cut into the adjacent part arcuate cutout, as shown in the photo:

At the end, antiseptic primer is applied to the finished surface, after which it is separated by several layers of varnish or paint.

Interior trimming

This is one of the most popular ways of covering private wooden houses from the inside, used in almost all rooms, and especially in the steam room. At the moment there are several types of lining:

classic;
block house;
softline;
landhaus;
american.

Wall sheat technology inside the house for all species is the same, and work from the device of a steamproof layer from the film and mounting the crates is starting. The film is unfolded with an adhesive from 10 to 15 cm, after which the joints should be carefully smoke with double-sided or ordinary tape. From above, she presses against the wall of the crates, whose thickness is 20 mm. Reiki are nailed to the wall vertically (with horizontal cladding) with a 40-50 cm interval.

Important. All slave rails must be removed in one vertical plane through various lining or mounting wedges.

The first board is fixed by self-reserves at a distance of 40-50 mm from the floor, taking into account the subsequent installation of the plinth. All subsequent planks are correctly fixed with metal elements - klimmers worn on the previous board and brushes navigated to cloves. Cutting the trim by clogging nails in the lining groove is not recommended.

As with the outside of the house, the house is a block house, all the joints and corners should be bred with fittings or wooden plinth. After that, it remains to be treated with antiseptic wood and coat with several layers of varnish. Detailed finishing technology is shown in video:

Interior decoration of plasterboard

Plasterboard is an excellent material for the draft finish of any interior surfaces of a wooden house, including the ceiling. Also moisture-proof GLCs are indispensable in rooms with high humidity - in bathrooms and pre-bankers. Subsequently, it is possible to put the tile or apply liquid wallpaper. Technology here is simple: Galvanized profiles are mounted onto the wall or ceiling in such a way that their shelves are in the same plane. To tighten the design between vertical profiles, jumpers from the same profiles are put.

Sheetsocarton sheets are screwed to the shelves of profiles with self-draws so that their caps are flush with the surface of GKL. The step between adjacent self-pressing is 10-15 cm. Where it is impossible to screw the whole sheet, you need to measure it accurately and cut off part. This is done with a sharply sharpened knife or specialized tool. When the wall is completely sewn, the locations of the docking and the hats of the self-tapping screws should be aligned with the putty, which, after drying, should be lured by sandpaper. On this surface is ready for further facing.

Conclusion

Thanks to now, existing facing materials can be given to any wooden house presentable appearance, and even "turning" it into stone with an external sheaving. In addition, the finish will allow longer to save wood and increase the service life of the building as a whole. It will not be superfluous and the event on the insulation of the house outside, as a result of which the costs of its heating will be reduced.