The better to nourish the lining. Subtleties of the fastening of the Euro woman. We are wearing a wagon steam room

Finishing ceilings and walls with clapboard, whether wood, plastic or metal, assumes the execution of consecutive steps of work. Observing the correctness of technological processes, you will get high-quality and durable coating.

If you stop the choice on wooden materials, they are environmentally friendly and have a lot of useful properties, your dwelling will be filled with wonderful woody aroma. This is a chance of reunion with nature and old traditions. Give warm and comfort family and loved ones!

Depending on the type of material from which the lining is produced, it is separated by the following types.

Wooden

This material has many subspecies whose distinction in varieties and rocks of wood. It is environmentally friendly and suitable for the framing of any surfaces, often used to clamp partitions in the apartment. Just mounted.

The disadvantages include only the need for pre-processing and subsequent careful care.

Plastic

The plastic option saves the budget. Suitable for both walls and ceilings. It looks aesthetic, moreover, it lies almost seamlessly.

Cons material - short life. In the sun, it burns out, and in the frost cracks.

Metal

Such panels are made of aluminum and steel that have an additional protective layer. Color gamut and texture are able to satisfy any buyer.

Aluminum products are created to serve quite a long time. Ideal for outdoor work. As for steel, if disrupting the integrity of the protective coating, corrosion processes will begin, and metal rotates.

What is the difference between the clap and eurvagon

Qualitatively to separate any surfaces allows the first and second option. However, the Euro woman is characterized by some characteristics:

euromathereal is made from other wood varieties using other technological processes;
has an elongated groove for fasteners;
it is inherent in other geometric parameters;
products pass better drying and special processing;
characterized by an additional ventilation function;
it has a system of removal of accumulated moisture, which protects the breed from destructive processes (special grooves are performed on the back of the panel, so as not to break the aesthetics of wood);
it has a higher cost.

Preparatory stage

Before starting to fasten the wall paneling to any wall, it is necessary to carefully prepare.

Treatment of wooden products

The initial treatment of wood is very important and is the primary:

If you use a coniferous breed, it is preventing residual spots, it is removed. For these manipulations, acetone is well suited. Then everything wipes with a damp cloth and dried.
To achieve the same shade of wood, treat it with a solution of oxalic acid and pharmacy peroxide.
Best existing flaws immediately close the wood putty.
To preserve the natural texture and giving a saturation of saturation perfectly fit the simulator or similar special impregnations.

After overlooking the moment of treatment, the wall-made walls can bring a lot of hassle in the future! The chemical compositions, which is very important, protect against fungal lesions and activity of various insects that destroy the structure of the tree.

Preparation of walls and ceiling

Qualitatively prepared walls and ceiling is the key to the successful outcome of the work and durability of the coating. Therefore, we act in stages:

All surfaces are cleaned of dust and other contaminants, you can apply both home and industrial vacuum cleaner.
Concrete and brick so that in the future prevent the reproduction of fungal colonies, processed by antiseptic and water-repellent means. Antibacterial and anti-infinite (fire-fighting) solutions are suitable for wood surfaces.
Waterproofing on the walls is necessary for creating a hydrocker in such houses, like a log cabin or other wooden material. The remaining in such protection do not need. A vapor insulation layer is immediately stacked on concrete and brick surfaces (rubberoid, polyethylene, foil). Parobarrier is mounted on fixed and displayed strips of 15x30 mm in size. How they will be installed - vertically or horizontally, depends on which orientation you will prefer for lining.

On a note! If the walls for the walls are located vertically, the crate is mounted horizontally, and the planks for steam barrier are already in a vertical position and vice versa.

The fastening of the Parobarper is carried out with the help of a stapler. Make sure that the material is not very stretched, otherwise, when the temperatures drops, it can be saved, and condensate will accumulate there.

How to make a crate under the lining

To properly put bars under the crate, follow the recommendations below:

heave the bars with refractory mortar and protect against fungal lesions, as described above;
install the rails perpendicular to the lining;
observe the same distance, the step between the bars must be 40-50 cm;
leave the gaps between the floor and the ceiling;
the frame must be perfectly smooth, use to check a plumb or level;
the interims between the bars and the wall in the fasteners are filled with special spacers.

Installing insulation

Warming technology is quite simple. The most optimal combination of layers will be:

insulation;
parobarrier;
lining.

The existing docrete significantly facilitates the process of additional insulation, the material is attached between the already installed racks.

One of the most popular and sought-after insulation is a foam, but it is not at all suitable for such premises, such as baths. It is better to use basalt wool here. It has wonderful characteristics, and, most importantly, does not burn.

Methods fastening clapboard

As a rule, any facing material has a spike-groove system, it is designed for high-quality fixation of the layers among themselves. But the lining should be triggered to the cerema frame. For this, nails, kleimers, brackets, or screws are used. In addition, the locations of the attachments can be performed hidden and open. It is important to track so that the entire constructive is qualitatively fixed, and the planks were not damaged.

Mounting stapler

Using the mounting stapler, the lining fasten quickly and conveniently. Staples are fighting in the grooves and well bind facing elements with a crate.

Kleimers

This method allows you to lifting the walls of the wall very carefully, however, is one of the complex. Nails must be clogged directly into the grooves, so they remain hidden.

Kleimers reliably fix the bar, but it is very important to initially choose nails in size. Typically, kleimer kits already include nails if they did not turn out, when choosing the groove thickness should be taken.

Saws and nails

This option involves a diagonal mount. Working Planka is fixed in the groove of the previous one, and the nail hat or self-press attracts it to the base.

Screws

Special ornamental screws are used to secure the chalkboard from the front side. So that your walls and ceilings look aesthetically, the installation should be carried out extremely gently.

Installation of fittings

The decoration of ceilings and walls with clapboard also provides for mounting accessories, which allows you to hide the edges of the material. Often, for these purposes, a quilt or plinth is applied, they are fixed by small carnations.

Basic installation rules:

floor connecting plates are fixed to the floor;
products for ceilings are fixed accordingly;
planks for the corners when the adjacent wall of the wall paneling in the room is not covered, they are mounted to this wall;
planks for angles located between the trimmed walls are set to the one that in short.

When working with plastic clap, the elements of the accessories are glued.

We are clapped with a wall

It is very important before proceeding to facing, withstand wooden material in a dry room about 48 hours. Taking a matter right away, you risk obtaining design deformation. Make sure that during the workflow, the plus temperature and air humidity of at least 60% were held.

Horizontal location

How to fix the lining to the wall correctly:

Typically, the installation of the slats is produced in a horizontal direction. In this regard, the first lower board is set up.
The mount is carried out from a long corner (relative to the entrance to the room).
To avoid visible defects on the top panel, carefully track the horizon and vertical, already starting with the first board.
Fix the first element and check the presence of possible errors over the level.
Then we insert into the grooves and fix the subsequent strips.

Vertical location

As a rule, the lining is attached equally, which is horizontally, which is vertically. Therefore, pushing out the instructions described above, perform the following actions:

Test panels from a long corner. Fix first.
The subsequent panels are driven into the grooves and also fix. Be sure to track the density of the pile, gently tapping on the edge of the board.
For this option, wide panels will be better. With their help, you can create a beautiful plane with a small amount of joints.

An experienced master is able to fulfill such work during the day. When the installation is completed, plinths are installed and corners. Then the walls are processed by the veil and varnish.

Features of fastening the clapboard on the ceiling

What do the walls of the wall look like, we looked at, but how to make the ceilings? The mounting of the slats on the ceiling is performed by the same scheme as for vertical surfaces. Here a self-tapping screw and a screwdriver will help, sometimes use small carnations.

If the penette under the panel is from the tree, it is mounted in the same way as for the wall. However, the distance between the bars is better to leave large. When the frame is planned from the metal, special suspensions are installed, and the guide profile is fixed on them.

Tip!To finish the ceiling, attract the second person to help. The work is simple, but it's hard enough and properly retain the panel, and to produce their fasteners.

How to fix the clapboard in the bath

Usually the construction of premises under the bath is performed from pine thorns. Many are further interested in the question, how to properly entertain the inner walls with their own hands. It should be known that it is no longer suitable for finishing the steam room, at high temperatures it begins to highlight the resin. When evaporation is still weak, such an aroma acts soothing and has a rest. But saturated smells lead to the weighting of the air, which is not good. Therefore, it is better to use birch or alder as a finishing material that exuded therapeutic flavors with a mass of useful properties.

Also for plating the steam, it is important to use special nails from wood. Everyone knows that metal products in the process of heating the premises are glowed themselves and when contacting the skin is capable of leaving the burn.

If you familiarize yourself with the main rules and competently approach the process, it is not difficult to bore the walls of your own dwelling, it is even interesting. It does not matter which profile you will prefer, you are now known how to mount and wooden, and plastic lining.

Believe that everything will work out! Good luck! And to new meetings!

Different materials can be used for finishing surfaces. They are chosen on the basis of their characteristics, properties and, of course, cost.

One common options for facing surfaces is the lining. However, it is necessary to understand how to mount the lining towards the wall.

In this article, we will look at the installation methods, advantages and disadvantages of each option.

Methods fastening clapboard

Try to lay bars smoothly

Installation of lining on the walls is best done with the crate - wood frame. For this, all the bars of the crates both in the horizontal and in the vertical plane must be exhibited.

Even minor errors can over time to lead to the occurrence of depressions and bulges that will be visible on the walls.

After the installation of the crate will be completed, the cladding is made. Below you can see the scheme of the crate to finish the surface.

Consider that if the lining is applied to cladding surfaces in the bath, the material must be previously treated with antiseptics.

From the fastener method, the installation of the lining will not depend on it. For the walls and the ceiling, the work will be the same. There are two ways to place boards:

Vertical. With this method of accommodation, work starts from one of the nodes. The first board is fixed with a groove out. The next bar is inserted into the previous one. Upon completion of the mounting of the board using the level, the evenness of its placement is checked.
Horizontal. With this placement, the spike board is guided up, it allows water to roll on the finish. This is starting with the ceiling.

Do not secure the lining close to the ceiling and the floor, leave the gaps

After all the boards are installed, a small area of \u200b\u200bthe board is inserted into the drop panel grooves, which is born with a hammer. This trick will allow you to tightly connect all the planks and prevent the appearance of slots or holes.

When installing the wall panels near the floor and the ceiling, you need to leave a small hole about 2 cm. This will protect yourself from sharp temperature difference and provide additional ventilation. If this is not done, after the expiration of a certain time, the board can appear. After completion of the trim, the slots are covered with a plinth.

Regardless of the selected attachment method, the first and last strap is attached using nails with a small hat.

The remaining panels can be attached in the following ways:

with the help of screws, screws or nails;
clammers. So called clamps that have a design with a special holder sticking the spike board;
building stapler.

You can choose any method of fastening. But consider that the board first is nailed to the middle bruster of the crate and only then along the edges. Then the accurate accommodation is checked with a level, after which the board is attached to the rest of the crates of the crate.

Mounting with nails

6 - 7 nails will leave the standard size board

This method is one of the easiest and cheapest, but it is not able to provide a high service life of the structure. When the nail clogging can damage the panel, which will already significantly reduce the strength of the fastener. To avoid this, you can apply a Dobochnik or pre-do the holes in the desired area of \u200b\u200bthe panel.

For one board, standard sizes will need approximately 6-7 nails. Such a fastener will affect the appearance of the finish, so, the cracks and other defects will remain at the place of the ridge. But in some situations, this method of fastening is the only possible solution.

Such work use galvanized nails with a length of about 6 mm. They neatly driven into the grooves of the boards and clogged with a hammer. Hats are clogged inside with the help of Dobochnik, it will make it possible to install the next plank without any problems.

Fasteners with screws

Choose high-quality fasteners

This method is used for buildings where the appearance of the walls does not matter. Often you can meet the use of such a method for closing a bath.

But high humidity and sharp temperature change can lead to drying fasteners, which will still worsen the appearance. This can be prevented if you treat the finish with special antiseptics.

For the prevention of processing boards, it is better every three months.

Self-tapping screws are quite high-quality fasteners, so if necessary, their use can be considered an optimal solution.

To implement such a fastener in the boards, you will need to pre-trigge the holes. The diameter of them should be equal to half of the fastener thickness.

The screws are screwed into the chalkboard with a screwdriver. They must enter the maximum possible depth. To hide the location of the fastener, you can use a wooden pin or grinding the surface.

Fastening stapler

How to fix the wall tag to the wall with a stapler? This procedure is easy enough and will not take you a lot of time and effort. But at the same time you will need to use the ability to use such a tool. For details on how to mount the lining stapler, see this video:

The staples must be administered at an angle of 45 °. If the input procedure was completed correctly, the subsequent installation procedure of the plank will pass without complications.

Fasteners with beammers

Conveniently apply Clemmers for hidden fasteners

Clammers will provide a hidden fastener almost any finish.

In this case, fixation will be durable and guarantees a high service life.

Installation of lining with such devices will make it possible to achieve the following advantages:

With the correct choice of fasteners, it is possible to install securely and guarantee its strength.
Clammers are made of high carbon steel, which allows them to withstand high moisture indicators and a sharp change of temperatures for a long time. This allows you to use this method of fasteners in bathrooms.

For the installation of eurograms of the standard profile, curls are purchased with a tongue height of about 4 mm, and for mounting a block house - in 6 mm. For finishing 1 m2 of the surface, there will be about 20 klimmers.

With this method of fixing the plate, they put on the spike of the first panel and are attached to the crate with nails or self-tapping screws.

Holes for fixing three, but you can apply only two. One nail is better not to install the wall paneling, as it can be shed.

Screwing the screws is better to produce with a screwdriver. This will significantly speed up and facilitate the process.

Horizontal installation of clapboard

When horizontal placing boards, the installation can be made from the bottom of the wall. With this choice, you can see well how best to fix the finish. In the ceiling plot, the final board is cut into width, which will significantly worsen the decorative component. In addition, with this method of installation between the boards there will be holes that will negatively affect the high moisture indicators in the bath or sauna. For details on how to shelter the house with lining horizontally, see this video:

Therefore, mainly when horizontal placing the board begin to be attached to the top of the wall. The first panel is installed in a groove down right under the ceiling. The next element is attached to the first crest in the groove of the previous one.

According to such a scheme, the installation of all boards is carried out. The final bar is cut into width and is inserted by mounting or nail. A small hole near the floor is hidden by plinth.

As you can see, the mounting of the wallboard can be performed in different ways. The choice depends only on your personal preferences and knowledge. The works are sufficiently light, therefore professional assistance is most likely not required.

It is difficult to find a more common finishing material than the lining that fell in love with the people in many ways due to its versatility and low price. Meanwhile, he has another noticeable plus, which is impossible to pass by which is simplicity. Almost every person, armed with the necessary tools and materials, can independently attach it to the wall. However, in order to accurately be confident as a result, especially if you do it for the first time, it will be worth learn about the basic intricacies of this simple operation. How to fix the lining to the wall correctly, our current step-by-step instruction is dedicated.

Characteristics of material. All pros and cons

Materials of natural origin have always been in honor of people. Even at the time when environmental safety issues still worried about anyone. Basically, modern lining is made of wood species that grow practically everywhere:

aspen;
cedar;
linden;
coniferous rocks.

Also recently, the lining made of plastic was specially popular. It imitates wood, but costs cheaper. Someone on such a "surrogate" looks with a fairing fraction of neglect, but as shown by the sales of finishing material, their minor minority.

Take a look at its main trumps:

simple processing;
long-term preservation of operational properties;
disguise engineering communications;
high sound insulation indicators;
visual appeal.

What can be said about the shortcomings? They have every material, and the lining in this sense cannot be exception.

susceptibility to moisture and temperature differences;
the possibility of sinking and cracking under the influence of specific temperature conditions;
potential fungus appearance (how to get rid of fungus on the walls);
flagity:
the presence of harmful substances (for plastic lining)

Do not hurry to be upset: almost all these advantages are easy to correct if it is in time to abandon with preventive treatment with antiseptics and hydrophobizers. Only after that it is possible to mount the lining to any wall surface with confidence, knowing that nothing bad with it will not happen.

There is another use of metal lining:

steel;
aluminum.

Such material does not make sure and is not deformed, it will not be distinguished by the dangerous substances. However, it is used to heat up, so it should be avoided by places open to the sun, as well as near light sources and plumbing pipes (read about how to hide pipes without mounting into the wall).

Several tips for the correct selection of the material will not be superfluous. Moreover, the options in the market - a bunch, and the newcomer will not be easy to deal with what material is better to mount to the wall.

try to choose boards with a maximum width - it is so easier to carry out the subsequent installation of the material;
in the case of vertical fixation of the lining, referred to the coincidence of its length with the height of the room;
the optimal selection of wood breed for baths - deciduous for steam and coniferous for a shower or pre-banker;
the main criterion for the purchase is dry material if even easy moistening has noticed - refrain from buying, since the installation will be impossible.

Preparatory moment. Marking and counting

It is present with each form of installation work.

do all the necessary measurements indoors;
calculate the required amount of material for finishing;
decide how much to purchase consumables for frame design;
equip your working area, getting rid of all extra, if there is some kind of overall furniture nearby, then it is better to cover it with a film in order to avoid contaminants.

Preparation of instruments and materials

There is even a novice, there are never ever brave for any home installation, it is difficult to surprise something. All the same classic set of tools:

perforator;
screwdriver;
level;
cord plumb;
meter;
pencil.

But I. necessary materials:

bruks for the crate;
dowels;
self-tapping screw;
nails;
kleimers.

And, in fact, the lining itself. Without her, nothing will happen!

Montage Karcasa

The main thing is to encounter at this stage - the choice of location prints.

horizontally;
vertically.

To do this, it is necessary to proceed from how you will fix the material to the wall:

if the lining is located vertically, the crate must be recorded in a horizontal position;
if the lining is positioned horizontally, then, accordingly, the frame must be attached vertically.

Everything else - according to the scheme:

prepare wooden bars with a thickness of 1 centimeter and drill holes in them with a minimum step of 50 centimeters, they must be about 1.5 mm less than the diameter of the screws;
attach bars to the wall and point through the holes of the point for subsequent drilling;
drill in the wall on the holes performed by the holes and insert the harvested dowels;
fix the bars to the dowels, controlling the accuracy of the consolidation with the help of a level, you can also check the plywood gasket for convenient work or to buy in the wedge store to align and perform the installation of crates in this way with minimal effort.

Installation of clapboard

Above, we have already noted that the carplant boards can be mounted on the wall as horizontally and vertically. Each option has its own nuances due to the specifics of use in a particular room.

Vertical location

visually increases the height of the room;
spreads the upper and lower boundaries;
it is recommended for use in bathrooms, as it helps optimal air circulation.

Fixation method: finish nails, kleimers, decorative screws.

Mounting nuances:

start fixing follows from the corner;
after the board is aligned in terms of the level, it is nailed with nails, and the hat is blocked in a side view, if kleimers are used, they are naked to the frame, and the second part in the grooves of the board;
fixing the wall paneling on the wall, check every 5-10 boards, whether the slope is observed, the cord is perfect for this;
the last lining is adjusted for the desired size using the hacksaw.

Horizontal location

increases the room in width;
suitable for high rooms;
he emphasizes the visual volume of the room.

Fixation method: finish nails, kleimers, selflessness.

Mounting nuances:

start fixation follows from the ceiling and gradually descend down;
every ten boards check the flattened landing;
the last board is cut to the desired sizes using a tree hacksaw;
all fragments get close to each other with a hammer;
the junction between the wall and the floor can be closed with a beautiful plinth.

Substantive video dedicated to the features of the installation of lining:

Of course, after examining the proposed step-by-step instructions, you are unlikely to become a pro, but for your first "dating" with the material, definitely prepare. Here you still have a couple of other good tips, which will help avoid common mistakes among beginners when attaching popular material to the wall:

the clapboard bought in the store should be unpacked and put on the front side on any flat surface - it is desirable to give it to stand a couple of days and only then start up;
the minimum permissible temperature in the room with direct installation is 5 degrees of heat, if below - should be postponed any operations with the material to the "best times";
after the lining is already fixed on the crate, it is recommended to cover it with varnish - so you can achieve a different type of texture on the surface: glossy, matte, with the effect of wet asphalt, stone, etc.;
it is not worth molding on the wall of lining wood lining wood, if we are talking about outdoor work - only coniferous breeds are used for this purpose;
if you plan to use the lining in the bathroom, toilet, the balcony or the kitchen, it is best to use an alternative version of plastic or aluminum - will last much longer;
but for the bedroom, hall, hallway the classic wooden lining is the perfect option;
do not use elements from plastic in the steam room - high temperature provokes selection of chemical reagents, which can negatively affect the health of you, your guests and loved ones.

Conclusion

Of course, knowing how to edit the wall tag to the wall correctly, may not come in handy in life more than once. Especially if you come with your own home - and you will be planning all these countless square meters for yourself. There is absolutely difficult in this. There is absolutely nothing - the installation of the wallboard on the wall is one of the simplest operations on finishing, and visible difficulties are no more than fleeting moments that easily leave with the accumulation of your experience.
You can improve your skills all my life - and why not start learning a new one with that operation we are talking about today? For an even greater expansion of your mounting skills, we advise you to get acquainted with the article: "How to fix plasterboard to the wall: 2 ways with photos and video."

Photo: vk.com

In this article, we will tell about the stages of the molding stages, explain how to make a competent selection of materials. You will also learn what is the difference between the installation of the wallboard on the walls from the installation on the ceiling.

Preparatory stage

This stage is only needed if wooden lining is used (). Then before you start working with the material, you need to give it to stand in the room at least a day - the tree should dry and purchase a room temperature. Only after that you can chop the lining of the desired length. If such a time is not withstanding, then the boards may lie to each other.

For this purpose, take a film from polyethylene, foil or rubberoid. The installation of this material goes on the rails that need to be tied up to the wall. The width of the rails takes less than 3 cm, and nailed to the wall in increments of 1 meter. Below and at the top of the vapor insulation break through small holes to improve ventilation.

Important! This stage is not strictly mandatory, but it is extremely desirable for premises subject to the influence of high humidity from the street.

How to make a crate under the lining

Reiki with a cross section of 20 × 40 mm with a screwdriver mounted in a step of 40-50 cm horizontally, regularly checking whether they are installed correctly. The use of rail allows you to align the wall (so that it is convenient to fit the boards), as well as make a gap between the wall and the wallpaper, which is needed to create ventilation.

If the wall is uneven, then under the crate you have to put something to put something (or take the crate of greater thickness). As a lining, a mounting wedge is usually taken, a piece of wooden bars or a fane. The lamp is fixed with a long-length dowel-nail dowel. The lower rail will be part of the floor by 5 cm, since the floor will be attached at the bottom, and the top is as much from the ceiling.

Installation of the crate should also be produced around the openings, window and door. It is worth noting that the crates are plastic and metal. Learn more about the installation of the crates can be viewed here:

Combining crates and vaporizolation

If vaporizolation is not used, the installation of the crate is carried out directly to the wall.

If it was used, then the fastening of the crates of the crate depends on the exactly how the vaporizolation was attracted: if the rails, on which the vapor barrier was mounted, were vertically fixed, then the races of the crates should be attached horizontally and vice versa. Fastening the crate to the rails, on which vaporizolation is carried out with the help of long screws.

In the resulting space stacked insulation. Mineral wool is usually taken as insulation. In order for the insulation with time, it is desirable to be installed under the influence of moisture, it is desirable to fix with polypropylene twine, which is usually fixed using a construction stapler to wooden slats.

On top of the insulation, you can also install another layer of vapor barrier, which should be attached by the rough side to the insulation. It is not necessary to do this, but it is extremely desirable for the room, the walls of which can be affected by moisture. Sometimes (especially when wearing the outer part of the buildings) from the above of the insulation is another doomle.

The lamp should be placed around the window and doorways. You can also use a plastic or metal crate.

Tip! If the room will be quite warm, then the installation of the insulation is optional. When using MDF or plastic lining, the insulation is often not taken at all, communications is placed in the space between the crate and the clapboard.

Installation of the first wooden lining

The mounting of the first lining to the wall is carried out from the angle of the room vertically: at the beginning there is a hole with a thin drill, and then fixed with self-drawing all over.

Info! If the Wooden Lining Block is attached, the installation of the first lining begins on top of the room horizontally, and such a lining should constantly evenly be at a strained line or a horizontal level.

If plastic lining is mounted, then the mounting of the first lining is carried out in conjunction with the molding (plastic rail).

It is worth noting that plastic PVC lining from all known PVC panels is distinguished by the lack of seam when connected (PVC panels are sometimes called seamless polymer clapboard). Therefore, PVC lining to the wall is attached almost just like the PVC panels, except that each plastic piece is attached to the stapler to the crate.

Methods of fastening and how to mount the lining

There are several options for how to lock the lining properly: with kleimers, screws or nails. The best option (for more than a long and expensive) is the installation with kleimers. Since in this case the surface of the lining does not deteriorate, and, if necessary, it can be dismantled without damage.

How to mount the lining on the kleimers

In the grooves of the installed lining the kleimer is installed. It moves with the help of a hammer in the lining groove and then nails are clogged into the kleimer holes.

Such a beam fastening is strong enough. The installation of the next will be implemented in the same way: in the groove of the molding, the new one is inserted, it is neatly clogged with a hammer (so that there are no lumen between the boards) and again fastened by cracks.

How to navigate the lining with nails or self-drawing

The method of fastening with nails or screws, unlike the previous one, "traumes" the material.

Bringing the wall paneling with the help of finish nails (with a small hat) can go with the front part of the board on the oblique from the longitudinal tongue (but not in the middle, otherwise you can go cracking).

This method has one more minus - nails or self-tapping screws will be visible on the front surface.

You can nail the crest of the lining board, if it goes with a displaced profile. In this case, each next board will cover the place of attachment and it will not be visible.

Important! Check regularly using a level, smoothly installed lining. No need to customize the boards very tightly to each other, otherwise they can wake up when moisture gets and move away from the wall.

Installation of fittings

After the lining is installed, you need to close the edges. This is best suited by a plinth or cartoon. Fastening to the wall of this element is carried out using small nails.

If plastic lining was used, the accessories sits on the glue.

Processing the surface of the lining

This stage applies only to wooden lining as it should be covered by a special composition that protects against insects and moisture. For this, antiseptics are used, biolalecting formulations and sometimes use anti-epires - a composition that reduces the likelihood of ignition. With the help of the coating, you can give various shades (for this use varnish), and it must be updated every few years.

Features of fastening the clapboard on the ceiling

If the framework on which the lining will be attached will be wooden, then the creation of such a frame is practically the same as crates on the wall. In this case, you can make a distance between the slacks of such a frame to do a little more.

If the frame will be metallic, then instead of the crate, a more complex suspension system will be used to which the guide profile will be attached. The maximum weight of the design of such a ceiling in this case can be increased by a large number of suspensions.

As you have already seen, the installation of the lining with your own hands is a completely saturated task with which it can cope with competent preparation and our step-by-step instructions each. In the end of the review, see the video. Good luck!

Differences Lining from Eurooval

Euromagle is distinguished by the best quality of wood
Has a more class profile
Euromagle has a deeper puzzle fastening
Has ventilation channels
More expensive clapboard

The process itself, how to fix the eurvagon, does not differ from the sheaving by the usual clapboard, it is equal to the euro of the tilt to the humidity of the board and the quality of surface treatment above, so pay special attention to this.

How to mount the lining video

Wall trimming trunks

https://youtu.be/c7b-juo1ntc.

Installation of plastic lining with your own hands - Video

How to fix the clapboard in the bath

The decoration of walls with clap is possible as standard in a wooden house, in a regular apartment, on the balcony, as well as in the bath. Cleaning wrappers, this is perhaps the best and most affordable solution. Installation clap in the bath has its own distinctive features. It is best for the steam room, ash, oak, birch, ox, pine, spruce, cedar or larch. Before sheeling with a clapboard, it is necessary to process it with special antifungal agents (antiseptics) twice.

The process of fastening the wall paneling on the walls and the ceiling of the bath does not differ from the standard, you can navigate the lining on the nails or the self-tapping screw, to be attached to kleimers.

Important! The lining after laying in the bath can not be covered with varnishes and paints.

Useful tips on laying lining in the steam room you will find in this video:

D.reversain - This is my favorite finishing material created by nature itself, she is decorated with the scolding of the bitch or unique in the beauty of the texture. Durable, reliable, beautiful, eco-friendly. Have a country house, to be the master in its own area of \u200b\u200bthe Earth - everyone's dream.

Wooden panels for mounting on the walls and ceiling today you can pick up from various wood breeds, different shapes, sizes, thickness. No plastic compares with natural wood.

Installation of such wooden panels we will look at today in our article. This is a lining that can be used for various purposes. It is suitable for facing indoor space: walls, ceiling and even floor. But some types of lining are suitable for the exterior of the building.

How to mount the lining so as not to spoil its appearance and at the same time keep the reliability of fasteners?

When you resort to the help of professional brigades, then questions about the ways of laying the lining disappear. But, sometimes, to save a budget or out of interest, the owner itself decides to install the duct. I really hope that this article will help you in your work.

The calculation of the quadrature of the lining on the walls and the ceilings is carried out according to a simple formula: working (without spike and groove) The width of the panel is multiplied by length (we get the area of \u200b\u200bone board). Next, we take the wall area and divide the area of \u200b\u200bone board. We add ten percent on scoop and learn the required volume of boards.

Photo 1. Installation of lining on the crate

First you have to put the crate. The lamp is wooden bars, which are subsequently attached panels. If the panels are laid vertically, the doom is mounted horizontally and vice versa. Bruks, with the help of a screwdriver and ordinary screws for wood (it is better to use not black fragile, but yellow, galvanized), smoothly screwed to the wall. Make exactly you will help the markup and the construction level.

If you decide that you need sound insulation, then the insulation can be put between the bar. The step of the crate at the same time will be fifty centimeters.

So, methods for fastening lining:

self-tapping screws in the facial board;
finish nails;
self-tapping screws or in groove;
kleimer (hidden fasteners).

How to navigate the Euro woman and the lining calm to the wall?

High-quality installation is accuracy, a good eye and, naturally, the tool. If you use screws, you will need a screwdriver, and if nails, then the usual hammer. Nails are better to choose special finishing without large caps, otherwise the visible part of the board will resemble a wooden barn in the village.

Photo 2. Installation of lining in the ray

When we use a hammer and a screwdriver, we make marking so that nails or screws are at the same level. Laying the lining open way will look pretty beautiful if you choose cloves without hats, and screws with a decorative head by a bead.

Personally, I do not like to work with a hammer. Nails often spoil the panels, wood ourselves. The percentage of waste turns out to be more, which is generally unacceptable when working with expensive rocks.

But the screwdriver and special screws with a cutter, which does not split the wood and, for which you do not need to pre-drill a hole, I like it. For example, self-tapping screws ESSVE is an excellent option with a decorative head by a bead and a design designed specifically for wood. Rightly mount the lining with such arsenal is very simple - see for yourself.

Photo 3. Essve screws for lining

Important! When installing in the ramp, it is important to score two nails or two screws, thanks to which the boards will be securely fit and they will not be twisted (bending).

How to fix the eurvagon and lining calm to the ceiling and walls in a hidden way?

It is very easy to use a galvanized plate: kleimer. We wear a plate on the rear spike of the panel and with the help of a screwdriver we screw to the lag (crate) with the frequency of apart bars. Approximate flow rate of 100 pieces per five meters square, if we fix the lining to the crate installed through fifty centimeters.

The durability of such a method of fastening the lining will provide the use of reinforced kleimers, if the planks are made of larch or other severe wood species. You can use a method of alternation of kleimers, reinforced-usual. Now you know how to fix the eurvagon and the calimers to the wall and the ceiling.

Photo 4. Fastening lining on kleimers

How to use screws to implement the installation procedure in a hidden way?

This method is quite popular. Screw to spitches, less often (if you work with the eurvagon) in the rear groove at an angle and overlaps the next bar. It is important to choose a constructive self-pressing, so that the thin wood does not split. Otherwise, there will be a lot of waste.

Photo 5. Mounting in spike

A milling cutter must be present at the tip, the hat should be cone-shaped, so that it can be "drown" in the wood when laying the lining of it.

Photo 6. Method of installation in the groove

So, we dismantled the main question in this article. Online store Leathering Ready to provide you with not only high-quality lumber and related products. Our consultants will prompt you how to mount the lining and eurvagon, will be offered the services of professional brigades. Contact. We are glad to help you.