High chair with your own hands: Schemes, drawings, sizes. How to make a wooden high chair with your own hands (photo-manual) Highchair drawing for feeding wooden

One of the positive moments in favor of wooden furniture is what is really to make a wooden chair for feeding with your own hands. Naturally, in the case of twins you will have to do two chairs at once. Note that usually homemade children's chairs for feeding from wood are different - classic folding, transformers and growing.

In this article in the style of "for dummies" we will tell how to make a chair for feeding with your own hands on the example of a wooden chair-transformer. We will show two working options for feeding with their own hands with drawings and sizes, as well as conduct some considerations about their occasion.

ATTENTION!!! The article turned out long, as we write not only for experienced masters, but also for beginners, as well as people who rarely make something with their own hands. If there is no desire to read everything - use the table of contents. Pop-up headlock tips will help you understand what is there, and choose the desired one.

If you want to make a chairs for feeding with your own hands, but not a transformer, or everyone knows how to do and love brevity, also not trouble. Over time, at this place will be a link to the entry, where information about homemade stools for feeding will be collected in one bunch. In the meantime, we look at the site map and heading, there are articles there.

The content of the article:

Highchair for feeding with your own hands - why a children's wooden chair transformer. MOTIVATION

One of the great advantages of children's wooden transformers for feeding is that the design of the chairs to the limit is simple, so they can really construct themselves even a newcomer. You can make such a chairs for feeding with your own hands either from the girlfriend, or without any problems to purchase the material at a small price.

In the article, a children's chair for feeding with their own hands, we considered in detail how the folding chair was made for feeding. It turned out that he was pretty simple. That's just his relevance is very doubtful - wooden furniture is always bulky and heavy, and in two years such a chairs will have to be disassembled on parts and make a separate children's table and a chair.

But the chair - the transformer immediately "kills" two hares: he and a chair, and the table - the party. At first, the chair is used in direct appointment, together with a small table, and then, after 1.5 years, it is understood, and the child has a separate desk and highchair. Convenient and practical. Perhaps this is exactly what is constant interest in the Wooden Stulcher to feed the feeding made with his own hands.

It remains only to figure out how such a miracle of technology make themselves. And at the beginning, let's see the video of one of the craftsmen.

Feeding chair with your own hands or a wooden chair transformer for feeding a child with your own hands start work

Searching in the Internet on the topic of a feeding chair with your own hands, it will become clear that there are two variants of the transformer chairs.

The first option is more complicated, but it is for some reason that he is popular on the Internet. Most likely, once someone made a wooden chair transformer for feeding with his own hands in this way, and then the articles on how to make it independently miraculously unfortunately. Because where to take the correct option is not clear. We give here the most understandable (for the author) description and sane drawings.

The second version of the chair for feeding with their own hands is simpler and logical, it is according to it that are made by factory wooden transformers. And we also give it here with our own measurements.

If everything is clear with the material and interest to the stool for feeding with their own hands only drawings and sizes, then immediately go below to parts how to make a chair for feeding with your own hands - option 1, and how to make a children's wooden chair for feeding with your own hands - option 2. Ah So far, since they decided to keep a story in the style of "for teapots", then let's talk about the materials used.

Highchair for feeding with your own hands - Materials

To make a chairs for feeding with their own hands, wooden bars will be required. A boards can be added with a thickness equal to the thickness of the bar. Plywood or LDSP, selflessness, glue, tissue washing upholstery and any soft filler. Well, still brackets for the construction (furniture) stapler.

A timber can be used by any, which is sold or is in the presence. It would be better that he was oversized. So it is less than about it. Otherwise, he will have to the pussy himself and do smooth. It is convenient to take the size of a bar of 20x30 mm.

As a tabletop for the table, the desktop and a small removable table for feeding for feeding will go litsp or thick plywood - from 10 to 15 mm thick.

Solid pieces of the back and seating of the chair for feeding with their own hands can be made of fiberboard or plywood. Faneur does not have to use thick, enough from 5 to 10 mm thick. In general, the plywood will be stronger, but in the Fiberboard it is easier to enter a staple bracket.

Some details are glued together. To do this, you can use carpentry or just glue PVA.

To make a soft back and seat chairs for feeding with your own hands, you will need an external upholstery - a durable easily washing fabric, such as a cloak or bologna, or just a glued, and inside a soft filler - foam rubber, batting, or anything else. Quantity See yourself how much you need. The soft filler can be glued to the solid parts of the back and seats, or simply begged it with a construction stapler, and you can combine both options. The upholstery is easier to fix it right away. So it will be more reliable. The size of the bracket depends on the stapler and the selected soft upholstery thickness.

It is still nice to have an average sandpaper, for the sump of the details and give it smoothness.

In the first version of the chairs for feeding with their own hands, only 4 tree screws are used: for attaching the table top to the desk. All other wooden parts will be connected to homemade drains, also from wood. You can put the remnants of bars.

In the second version of the chair for feeding with their own hands, there is practically no dumb, but there are many self-tapping screws to fasten all parts of each other. Factory transformers are made on the euro of self-drawing, and a children's wooden chair transformer for feeding with their own hands can be collected on any. The main thing to collect correctly. Sucks are used only if you decide to make rounded items that are conveniently fixed to the bars with their help.

In both versions of the wooden table and the chair for feeding with their own hands there are rounded elements, although you can do without them. These elements can be made either from the boards with a thickness of the corresponding thickness of the bar used. If the bar is taken, as here, 20x30 mm, then the board takes a thickness of 20 mm, but you can and 30 mm, it, depending on how you put the bars, joke g). If there are no boards, then the same bars are perfect. Only they need to glue together.

Depending on how much and how you place the rounded items for cutting on the board or glued bars, the length of them (boards, bars) and you need to take. On glued bars or board, it is necessary to put 4 elements at once. Therefore, the length will be from 0.5 to 1 m, and maybe 2 m are not enough.

Feeding chair with her own hands - Separate words about wood and paintwork

I propose to pay attention to the stool tree material for feeding. Immediately, we note that the children's wooden chair for feeding with their own hands is best made from the linden. However, like any other children's furniture for kids. Since the coniferous breeds are often used in the manufacture of wooden furniture. The trees can not approach: pine highlights a resin that is very toxic. And child health is better not to risk. However, in construction stores often lies with pine, therefore we try to take as dry as possible and without intelligence of the resin. Believe me, the child will be better, and you yourself do easier.

To impart brilliance, color and environmental protection, it is better to use acrylic varnish, or paint. It is not so harmful to the baby, like the rest. Why he is he? Answer - what if the kid will try a table or a chair for feeding, which you yourself made your own hands? For the consequences to answer you. Although if it does not care if you have it possible to get them, then you can cover the feeding chair with your own hands than it will want.

Children's chair for feeding a wooden transformer with their own hands - Option 1

For understanding that he will represent the highchair for feeding with their own hands in the form of composite parts of option 1, give drawings and sizes.

To make parts of a children's highchair for feeding a wooden transformer with their own hands, we take the timing with a cross section, for example, 20x30mm. From it we will do the following details. Indicate the length and quantity.

Legs - 390 mm, 4 pcs.
Rounded parts - 4 pcs.
Armrests, they are the top of the high chairs - 195 mm, 2 pcs.
Planks, walking parallel to armrests, they are crossbars, 335 mm, 2 pcs. On these crossbars, then we will clipped the seats with the crossing chairs for feeding
Planks on which the seat and back are attached, they are accepted - 300 mm, 3 pcs. Two for seating and one for the back
A small table on the chair (in X W) 340x340 mm. It lies on the armrests of the chair 340 mm \u003d 300 (the length of the stool is the chair) + 20 + 20 mm.
The seat and the back have the same dimensions (in x x) 250x290 mm. The width is 290 mm \u003d 300 (the length of the bar is crosslinked) - 5 - 5 (gaps on both sides for upholstery and soft filler), mm.

Legs 500 mm 4 pcs.
Planks for the lower and top of 410 mm 4 pcs. On the bottom straps, the table for feeding is worth, on the top mounted countertop.
Cross slats 340 mm 4 pcs. To bore the sidewalls of the table. Length 340 (mm) \u003d 300 (length of chairs) + 20 + 20 (mm). So done so that the chair gets up between the sidewalls of the table.
Countertop (in x W) - 440 × 380 mm. 1 PC. The tabletop lies on the upper boards and is not issued beyond the limits of the sidewall. Width 380 (mm) \u003d 340 (transverse strip length) + 20 + 20 (mm). Length 440 (mm) \u003d 410 (Top Planck Length) + 30 mm

How to make a chairs for feeding with your own hands

Begins work from the chair. For this, according to sizes, the desired length of the bars are fixed. Separately, you need to make rounded parts - they connect legs and armrests in front and rear. Naturally, all dug details need to be made smooth, without a pile and with special care to treat emery paper - small children are always increased injury. Danger. Therefore, to the question of how to make a chair for feeding with your own hands, we give a pathetic answer - we work for conscience.

Roundings for the wooden chairs of the transformer for feeding with their own hands are cut separately - according to the drawing. For rounded parts there is one important point. If you glue the bars and lay the part with wood fibers not as shown in the figure, then such a part when drinking, or further operation can be mad at the most unexpected way. Therefore, the bars need to glue with wood fibers in parallel to each other. And it is necessary to have a rounded part of the chairs for feeding with your own hands along these parallels. The same goes and the board - the part for drinking, we have parallel wood fibers.

To successfully glue the bars using joiner and pva. Additionally, the bars do not need to align. For bars, it is necessary to choose enough flat planes, correctly arrange them and just rush to the clamps. During the day, probably dried.

Then from the waste of bars for the stool for feeding with their own hands, you can make rectangular ducts. Dimensions - 8x20x50 mm. In general, the length of the sewage should be made by 4-5 mm less than the total depth of the groove of two fastened parts. The edges of the sewage can be slightly rounded.

On all the details place places for landing the wanks. To do this, it is necessary to place the contours of the groove, for example, a pencil. Rectangular grooves for the wrenches need to make a depth of about 30 mm. To do this, drill a drill with a diameter of 6 mm 4-5 holes. Next, with the help of the chisels, align the walls of the groove and fit under your own, individual, homemade wanks. And if there is a milling mill, then the grooves make a mill, so easier.

When all the details are ready, there are seas and grooves for fastening, you can start assembling the children's chairs for feeding a wooden transformer with your own hands.

Wooden chair transformer for feeding a child with her own hands - assembly

Wooden chairs Transformer for feeding with their own hands begin to collect with sidewalls. First one is done, then the second. On the wanks to draw in the middle of the length line. Using a light hammer to install to the lined line. Then we take the part connected and insert the wanks into it. We connect the details at first to dry, i.e. without glue. After all the details of the sidewall are connected, check for the presence of slots. If everything is fine, we gently divide the parts and sample the ducks, and then we collect again, as described above. Then you need to pull the items and give dry, about 1 day. You can roll with clamps, or firmly wind up with a rope from two sides. But at the same time to look so that nothing has twisted, and there were no cracks. Rope is less reliably than clamp, but not everyone has clamps of such sizes.

So far, the sidewalls of the chairs of the transformer for feeding the child can be done by doing their own seats and backs. They are cut out of plywood or fiberboard, according to the drawing. If the plywood is not thick or used fiberboard, then it is better to cut 3 parts of the seating and back and glue them with each other. We wash glue and clamp the clamps. Such a day.

After the sidewalls, the seat and back are assembled and cut, we collect everything finally. On the seat and back with the planned reverse side of the wooden chairs of the transformer for feeding a child with their own hands, you can immediately attach the planks crossing. To do this, use either the seasons, or what will be even easier, small self-tapping screws. In order to succeed normally, the planks should be fixed with gaps of 5 mm on each side of the width of the seating and the back. The back and seat can be combined with a metal corner, or bent along the metal strip.

If we do on the sewage, then in the seat drill holes for fastening to the cross the chair. Bashed better on 4 pcs. Standard cylindrical waders. For the back of such waders - 2 pcs. We connect the sidewalls by crossings on which the seat will fall. We do without glue to check and see the positions of the seat and back. Also without glue, we plant the seat on the crossbars on the seasons. Flexing and flexing the back, mark the position of the bar for fixing the back, then disassemble. If there is a desire, you can cut the side bar for the back according to the drawing. There is no desire - everything will be fine too.

At the children's chair for feeding a wooden transformer with their own hands we are wearing a sidew and a back of a soft filler: glue it to a solid part or nailed with a stapler. Then with again with a stapler, stretch the upholstery. It is better not to save, and do not try to the upholstery and the soft part is to fix one and the same bracket. Maybe something to twist, and it will be not good.

Then we collect all the parts on the woven wrappers. We put in place, check the corners. Plank the backrest is kpripim to the back on 2 cylindrical ducts. Check the gaps and tighten with clamps or rope. We are waiting until he dries. All, chair from a wooden chairs of transformer for feeding with their own hands is ready .

We repeat. If there is no desire to mess around with the seats, all parts are actually connected using conventional screws. Perhaps it will not be so firmly, but it is easier to assemble. Deciding, of course, master. And the roundabilities are more convenient and durable to fasten with the help of the wrenches, and then thoroughly wrap them with glue. After that, leave the finished sideline on a day to dry.

The last step: cut out, according to the size of a small table on the chair for feeding with your own hands. It can be left rectangular, you can round in the part of the closest to the child. This is not fundamentally. Only the case of aesthetics and coming. This table is attached to the edges of the armrests. It is possible on cylindrical ducts, you can on self-drawing. And when the child is growing, he is simply removed and everything, he is no longer needed.

The table for the feeding for feeding with her hands is also assembled as a chair. At the beginning of dry, then with glue. Used either homemade drums, or self-tapping screws. We start with sidewalls. We attach the top and bottom planks to the legs, two rectangles are obtained. When the sidewalls are assembled, they are, like a chair, you need to pull and wait a day while dried.

Further the transverse bars are fastened - with their help the sidewalls are connected. Scrolls for feeding table with their own hands, attacks according to the drawing. The general meaning is that they are at no distances from the edges of the sidewall. On the lower, which will be closer to the edge, stand the legs of the chair in the position of the chair for feeding. And the top serves as strips for the legs of the chair, so that the chair stood is firmly.

Drinking from plywood or LDSP Countertop is mounted on top of the top pieces of sidewall and screwed up with self-draws. Everything is going together and tightened as usual, we wait until dried.

When the table is ready for feeding chair, turn it into a stool transformer for feeding a child. To do this, connect them. The table turns over, the countertop turns out to be behind, and the chair is put on the transverse planks of the table.

Table Transformer For Feeding a Wooden Wooden DIY - Latest Strokes

Finally, when the chair and a table are ready, for the last time we check for roughness and squeak, if they found it.

When the chair and a table of a transformer for feeding a child's wooden hand are made with their own hands, they should be fully stirred - varnishes to use exclusively non-toxic, or paint acrylic paint. To pre-give the desired color you can rip and dry.

Everything, the first option is ready. The most adequate description was found at http://mebelsam.com, from this site was taken by a note on the first option.

Children's chairs for feeding a wooden transformer with your own hands - Option 2

To understand that he will represent a highchair for feeding with their own hands in the form of composite parts of option 2, give drawings and sizes.

To make parts of a children's highchair for feeding a wooden transformer with their own hands we take the timing with a cross section, for example, 20x30 mm. From you need to do the following details: indicate the length and quantity.

Size for feeding with your own hands Size spare parts, Length and quantity

If there are no rounded parts

Legs 450 mm 4 pcs.
Armrests - 365 mm 2 pcs.

If there are rounded parts

Front legs 450 mm - 2 pcs., Rear 390 mm - 2 pcs.
Armrests - 290 mm 2 pcs.
Round item according to the scheme - 2 pcs

General

Lower strips on the sidewalls 365 mm 2 pcs.
Cross bars 350 mm 4 pcs. They attack the seat and back.
Seat (in x x) 290x330 mm
Back (in x x) 450х330 mm

Size of spare parts, length and quantity

Legs - 450 mm 4 pcs. Legs located in the middle of the table, and are the bottom straps of the sidewall.
The lower and upper crossbars, in which a table for feeding stands in the position of the desk-part, and to which the countertop is attached - 500 mm 4 pcs.
Cross slats 410 mm 3 pcs.
Countertop (in x W) 500x510 mm
Straps fastening for stool legs 230 mm. Attention - in the diagram, the thickness of the bars - 15x15 mm, but anyone can use. For example, the same 20x30 mm.

Wooden chair transformer for feeding the child with her own hands - the main differences from the option 1

The previous part about the wooden chair transformer for feeding the child with their own hands turned out to be too voluminous. Therefore, in order not to write a sheet again, let's say that everything is done according to the drawing and size similar to the first option.

The wrenches are not used, the elimination rounded parts of the chair for feeding. They are done, as in Embodiment 1, only have other dimensions. Everything else is fastened on self-drawing. You can regular on wood, you can euro. If you use Eurosamores, then place the places where they should enter. And at the place with a smaller diameter, drills the hole for them.

Highchair for feeding with your own hands - make items and collect

Bruks are cut down according to sizes. Carefully processed by sandpaper. A cardinal difference from the first chairs for feeding with their own hands is the lack of special round parts. But since sharp corners are an increased danger to a small child, they need to round. A little curly on one side precisely the top parts of the knock legs. And also twist the two bottom crossbars of the table - the legs on which it is worth.

You can still in the sidewalls between the armrest and the bottom plank, to which the seat is mounted, insert several strokes, rectangular or round is irrelevant. You can accommodate them anywhere at any distance, the main thing in the area of \u200b\u200bthe seating. It is that the kid does not pack through the sidewall, and for beauty will go.

Another touch.
How to make a chairs for feeding with your own hands with a movable back? It can be done so that the back of the chair for feeding made by their own hands took several positions. You will have to tinker.

For this, the rear legs and armrests are bonded with each other with a round part, as it was in the first version. In this case, the size of the armrest and the rear legs will be others (see description of the sizes of the chair). In the roundabout you need to do a hole where the screw will be inserted into the end, with a pen - a fixer at the end. The screw is one side to the back of the chair, the other rides this hole. The handle screws out the edge and fixes it in the desired position. The back is fixed.

The hole can be made either by the mill, or make some small holes with a drill and then modify the chisel. The size of the opening depends on the screw used. The handle can be anyone you are comfortable. In the handle, we carefully choose the groove under the nut, which actually will screw themselves on the screw and fix the back of the stool. The screw itself is conveniently fixed not in the back of the chair, but in the upper cross.

Once again, we note that the rounding of the chair for feeding with their own hands is more convenient and better to fasten with the help of cursed wanks. On self-drawing will be uncomfortable and paint.

Specifically for the kid, such a version of the chair is very convenient, but to make it, you will have to make some efforts. If there is no desire, then really do without a mobile back, then it makes no sense to make a separate rounding. Just tilting the back as you and the baby are comfortable. We place the place of touching the top transverse plate of a plaque back and sidewalls. Drills there hole. We fasten the sidewall and the back of the self-tapping screw. So from each sidewall.

When the sidewalls for the children's chair for feeding are assembled with their own hands, two transverse fastening strips for seating and one on a movable cylindrical seating for fastening the back are screwed to the lower straps of the sidewall. The movable wanking means that one of the grooves into several (mm) is greater than the diameter of the sewage.

The back and sesidement is also made as in the first version. Only sizes here are a little others - a longer back. For the baby it is more convenient. It is also not necessarily a seat and a back to fasten each other, they are enough to attach to transverse boards, and in consequence to make soft and cutting, for example, with a glue. Before the upholstery, as usual, whirlpool and paints.

All, highchairs for a children's wooden transformer for feeding with their own hands is ready.

Hand-up table for feeding with your own hands

The table for the feeding for feeding with their own hands is going in the same way as in the first version. First sidewalls. When the sidewalls are assembled, they are bonded between themselves transverse straps located below - they also serve as supports on which there is a chair in the assembled form. This is important, since they are installed on them, and it plays a role in its solid installation.

This is distinguished from the previous version - in the middle at the bottom of the table there is no extra crossbar, which makes the table not closed, and a more comfortable child to sit behind him. At the same time, two crossbars go only from the bottom, where the countertop is attached - cross-one. When everything is collected, it remains to scout a worktop.

There is one point here.
How to make a table top for a transformer chairs for feeding with their own hands? The figure is given a scheme and dimensions of the option with grooves. For simplicity, the table top for feeding with their own hands can be simply placed on the bars, and they can be done in the factory - to hold between the bars. The first option is easier, but the self-tapping screws will be visible at the most suitable place. The second will require more about it, but more beautiful. To hold between bars, you need to make grooves in them. This is done without any problems with a mill, or just a bit, but it is longer in time. Accordingly, the sizes of the countertops will be different. The groove is washed away to do in the thickness of the table top and a depth of 5 mm.

For greater stability of the stool standing on the table, in the assembled form of a children's chair for feeding a wooden transformer with their own hands, you can additionally make four small lumps - two on each side. They are located under the table top, it is better to put them on the "fact". Those. When the table and chair are ready, put a chair on the table above, as it should be in the end. Location from the inside on the sidewalls of the table, where the legs of the chair are held closest to the tabletop. On the sides parallel with the markup, we embarcate to the sidewalls of the table, these lumps, one on each side. As a result, it should be possible, so that the legs of the chair, closest to the tabletop, passed between these bars, and they, in turn, do not give a chair to move in different directions. This gives the chair additional stability.

A table for feeding is ready for feeding.

Highchair for feeding with your own hands - the result and some conclusions

As usual, summing up, arguing on the topic, what is easier - to keep a chair for feeding with your own hands, or buy? The answer is unequivocal - buy. Moreover, wooden transformers are very common today and are inexpensive. But there are people who want to make their own efforts and fantasy, and maybe someone did not disassemble the ruins of their building materials for a long time. Then in the way - creativity was valued at all times.

The first option, of course, the most common on the Internet, but it is not the easiest. There you have to mess around with the seasons, make the grooves, glue the details. Excellent, if there is a special large clamp, since the usual rope can squeeze the item. And the details, if not squeeze at all, it may not work at all. In short, there is a lot of freight. In addition, over time, such a product will definitely disappear, remember the old digging chairs. And your child definitely shakes the finished highchair for feeding with your own hands done by you.

The second option is not distributed online. But this chair for feeding with their own hands is similar to the factory stool transformer. Collected on self-drawing. The main thing to ensure that when assembling, the mating parts of the details stood under 90 degrees to each other and did not twist. Missed little. Only if you want to make a movable back with a rounded item, then you have to sweat.

At one time, when they wanted to make a highchair for feeding a wooden transformer with their own hands, we were known for the first option. But he seemed to be complicated. And then, when they bought a factory, found its size and realized that he was not worse, and maybe better than the first option. If I had to do another time, it would be chosen the second option.

How to make a chair for feeding with your hands video craftsmen

In principle, each craftsman makes his stool transformer for feeding with his own hands. So to speak under your needs and with your capabilities. Here are collected the most understandable and popular video. It will become clear that the timber can be of any size. The dimensions of the stool-table for feeding, can also be any. The main thing is to catch the essence of the design and sequence - how to make a chairs for feeding with your own hands.

It all started with the fact that I had a daughter :) Now she is 1.3 years old and she has already learned to deftly sit down to the dad on the knees and read the book. Each child, as in an adult, should have its own chair. Searches in children's stores were not crowned with success, all plastic chairs and large or with a pork hole. We needed a normal chair for the seating, for a very little girl.

Here he is a chair, made with his own hands for a couple of evenings, not a work of art, but very comfortable and the daughter checks out!

There were no drawings initially, everything was done on the eye.

On the photo, my daughter is already sitting on a new chair :)

Children's chair made from plywood 8 mm. Details are glued with PVA glue, several screws and the whole design is covered with a breaking varnish in one layer. Stool weight 715 grams, the child calmly drags him around the apartment.

Height from the floor to seating 180 mm, the size of the seat cover is 240x190 mm, the height of the floor chair to the top edge of the backrest is 360 mm, the sizes of the backrest 235x115 mm.

Test version of the chair was made of cardboard in three minutes. He was made to get approximate sizes and understand how comfortable it would be for a child. To satisfy the baby on this chair did not really work out, but in size it turned out to be!

To make the second part of the chair, I just circled the first pencil and also cut out the jigsaw.

By the way, I must say about connecting details. Initially, I thought everything was done without screws and nails, and since everything was made with an expression, then without errors it did not cost. The photo shows below that the details have spikes, there is not enough spikes on the details on the right, I forgot to draw it and saws :)

Schip on the details on the left, I later dug, so the back had to be fixed with screws.

Below in the photo Detail of the back and the item, which is under the seat, it does not give a chair to swing. On this detail, also had to be spikes, about which I also forgot :)

After all the details of the chair are drinking, everything must be cleaned with sandpaper, I spent a bunch of time for a single kink! After all the glue plow glue or twist the screws, if suddenly you like it to make spikes :) And finally, cover the product with a layer of varnish or how fashionably make decoupage. I would like to paint a chair with bright colored paints, but while left a blank color of the tree.

Update: cut a few such chairs on the CNC, so I had to transfer the drawings to AutoCAD.

Alice: "And I still will sit on my father's chairs!":)

Send pictures of your chairs and satisfied smiles of kids, mail address on page

Children's chair is a necessity for the parents of the baby. It is needed primarily for feeding a child. Our specialists have prepared a number of recommendations, thanks to which a children's chairs can be made with their own hands.

Highchair and its features

Children's chairs will need a child at that age when he can sit on his own, that is, from five to six months. Previously, this time, such a piece of furniture to the baby will be without necessary - he still does not hold his back. And after half a year, the child sitting on it can eat, play, engage in creativity (for example, sculpt or draw). But in such cases it will also be needed. This design is called combined.

Consider what features a children's highchair from an adult chair is distinguished:

Convenient design for the baby, and not for an adult, thanks to its size.
The correct design for the back of the child (since the bones of the skeleton of the child were not yet risen, and the posture is in the formation stage, the back of the chair must maintain the correct position of the baby's back).
The highchair should be equipped with safety belts and an anatomical insert, which is located between the legs (such additional components will help the child to take a convenient position and will be able to keep it in the seating process), the seat and the back are soft.
The design of the children's chair should still be sufficiently stable, even if it is equipped with wheels for moving.
Materials from which high chairs are made for children, select only environmentally friendly, natural.
He should not be cumbersome, because it will be uncomfortable in operation and will not fit into the interior of the room.

Of course, the real benefit from a similar object of furniture for the kid exists, it consists in convenience and comfort. Especially if such a chairs will be made with his own pope or grandfathers.

Types of children's chairs

The main feature of the chairs for the kid is its convenience. Therefore, experts have developed several types of designs of this furniture subject.

Self-type chair. It can be both in high legs and low. His ease is that it can be moved to an adult dining table. Undoubted minus is that it cannot be folded.
Foldable option. This model is most popular, as it contains a number of functionality in addition to the main purpose:
- regulation of the tilt of the back and height of the legs;
- convenient mechanism for folding and folding;
- the ability to attach wheels to move around the room.

Despite a number of advantages, the lack of it is that the design has large dimensions due to the long distance between the legs (this is necessary for the sustainability of the entire design).

Chair table (combined design). This design is most often manufactured either from wood or plastic. It can be used as an independent chair, and as a "table + chair." The design mechanism allows you to lay it, adjust the height, fold, which allows you to save space in the room. Of the shortcomings - not all similar models can be folded into separate items, that is, the table cannot be disconnected from it.

In addition to the listed options for children's chairs, there are other, but less popular, characterized by their functional capabilities - with a turn of 360 degrees, the position of "midstage", game elements, etc.

Drawings and chairs for chairs

To make a chair for a child, you need to consider various schemes and drawings to this piece of furniture. They must correspond to the age of the baby, its growth and weight.

There are two main schemes for the manufacture of a chair with their own hands:

An independent chair that is used for casual daily classes (mainly for games and creativity), its form repeats the adult piece of furniture, but in smaller dimensions.
A feeding chair - its feature is that this option should either be equipped with a table of compact sizes, or move to an adult dining table.

The classic version of the second scheme is a frame of four legs, which are attached to the seat and back. But there is an unconventional option when the seat with a backrest is also attached to solid side elements. Both options can be made of wood, although plywood and chipboard is suitable.

Considering both drawings, do not forget to deal with the sizes of this object of furniture so that the baby does not feel discomfort.

Child chair do it yourself: its size

Children's chairs, even made with their own hands, must have some sizes. This is directly connected with the growth of the baby, which grows and develops. For this, specialists have developed special GOSTS: 11015-93 and 11016-93.

Consider a consolidated table of parameters in accordance with the growth of the child and the size of its chair.

№	Growth of the baby (cm)	Chair height (cm)
1	up to 85	18
2	85 — 100	22
3	101 — 115	26
4	116 — 130	30
5	131 — 145	34
6	146 — 160	38
7	161 — 175	42
8	from 175.	46

These sizes need to correlate with other parameters that will be needed for the manufacture of a chair for a child with their own hands. The following recommendations are suitable for chairs of any height:

Deepening the surface of the seat - from 10 mm.
The in-depth seat surface occupies a 2/3 of the rear from its minimum depth.
The deep part falls on a specific point (it is located at a distance of ¾ from the front edge of the seat, pushing out of the size of the minimum recess).
Unpainted seat with a slope toward the back of 3 degrees.
The distance from the floor to the footboard is from 0.75 heights of the seat.

It should be borne in mind that the seat depth is measured by two parameters:

front edge of the seat;
line intersection of the seat with the back.

Another way to measure this parameter to spend a vertical line, which should pass through the turning point of the chalk backing point.

Descriptions of the table for the combined version of the children's chairs

As already mentioned, the design of the chair for the child can be combined, that is, combined with a table. Therefore, since we are talking about chairs, there is a need to consider the size of the tables suitable for them. Consider the comparison table of these parameters:

№	Growth of the baby (cm)	Stool height (cm)	Height of the table (cm)
1	up to 85	18	34
2	85 — 100	22	40
3	101 — 115	26	46
4	116 — 130	30	52
5	131 — 145	34	58
6	146 — 160	38	64
7	161 — 175	42	70
8	from 175.	46	76

These sizes are taken from guests and are suitable for self-making with their own hands.

Basic parts for making a chair for a child with their own hands

Any children's chair contains the basic details that must match the diagram of the selected drawing and sizes. These details include:

The legs (for the chair / table) are their standard number of 4 pieces, but there are such designs of structures in which only two side backs.
The crossbars - there may be two pieces (in the case of two lateral backs - one).
Coast:
- for a stool with four legs - 3 pieces;
- for a four-leg table - 4 pieces.
Seat - 1 piece.
Back - 1 piece.
Countertop - 1 piece.

These details can be made with your own hands, and you can buy already ready for the kit and collect design according to the scheme yourself.

Stool assembly scheme for child (do it yourself)

High assembly schemes must match the drawings. But the generalized version will look like this:

Transverse crossbars are attached to the legs:
- starting from the rear legs, between which the first transverse crossbar is fixed;
- a pair of front legs with a second transverse crossbar is connected;
- the rear and front legs are combined with each other, for this you will need two more crossbars.
The seat is attached (such a fastening should be reliable, so after fixing it with screws, these places are also lubricated with glue).
The seat back is installed.

To make the life of a kid more comfortable, many parents acquire special furniture for all life situations. So, for example, a children's chair is used to design a game, workplace, is a necessary subject of children's furniture, which is used for feeding the kid. The cost of such a device is quite high, and the choice among materials and models is even more. But there is a decision of such a situation - this is a children's chair from plywood or boards. Material, tools and fasteners for the manufacture of this product are quite accessible - they can be found in any construction store or even at home. Special attention should be paid to such a question: how to make a chair with your own hands?

The easiest way to build a wooden chair. This option has many advantages that belong to the type of material:

The material is easily processed
The cost of the tree is not so high
Aesthetic type of product from this material is initially acceptable and without additional staining or decoration
Wood product completely environmentally friendly

Consider from which components, consumables need to make a children's wooden chair with their own hands. In addition to the main material, additional elements will be needed, without the use of which the quality product simply fails:

Fastening of parts can be carried out with the help of furniture glue, carnations or small self-tapping screws
Sometimes metal corners are used to strengthen the design
Often the seat and back is covered with foam rubber, which is covered with cloth
To hide the places where the fittings are made with the help of self-tapping screws, you need to buy special plastic lining
For legs, there are also rubber and plastic lining so that they do not scratch the flooring

For processing, you may need a veil or wood varnish. Sometimes a chair from a tree is painted with eco-friendly paint. Such measures are not required, the main thing is that the kid does not borrow due to the poorly treated surface of the product.

Make a children's table with your own hands is not so difficult, as it seems. It is only necessary to have the necessary materials, as well as some skills in working with wood and tools.

Table for children: detailed instructions

On video: Detailed master class on the manufacture of table.

The design of the children's table is pretty simple and this is perfectly visible in the photo. It includes a tabletop and legs that hold it. For the legs you need wooden bars with a size of 40x40 mm (50x50). As a tabletop, you can use a furniture shield by reducing it to the desired size using a saw.

If there is no ready-made tabletop, you can make it by knocking up wide boards, and with top of sticking a piece of plywood.

Following simple instructions, you can make a completely decent children's table with your own hands.

Take the furniture shield with a size of 40x80 cm. On the reverse side, make a markup to fasten the frame to which the legs will be screwed later. Return approximately 5 cm from the edge and read a smooth line across the perimeter of the table top.

Take the long block 40x40 mm, with a saw, cut it into two pieces of 30 cm long and two - 70 cm.

With the help of self-screws, fasten the bars strictly along the lines marked. So that the tree does not crack, mark the connection places in advance, the pva glue, and under the screws to put the washers.

Take another 4 bar (40x40) of the same length (40-50 cm) and screw them in the corners of the structure using self-samples. Ideally, you need to use special metal corners that will provide the table stability.

In principle, the table is ready, it remains only to give him an external aesthetics and protect against external influence (scratches, moisture). To do this, handle the sandpaper all the design, the ends of the table top will cross the special edge. Product cover three layers of varnish.

Table with lifting lid

A simple children's table from the tree is fully prepared for further use. On him the child will be able to play and learn. Especially for drawing and various types of artistic creativity can be made on their own table with a lid, similar to the fact that in the photo.

Take the finished table top of 90x45 cm. From individual bars (50x50 mm) to build a frame. Take two wooden segments with a length of 80 cm, two - 40 cm and run them with nails. In the middle, insert another exactly suitable in size (about 35 cm). To strengthen the design to each angle on the self-tapping screws, install wooden corners that can be ast on yourself. Attach the worktop to the front of the frame on 2-3 furniture hinge hinges.

Furniture loops can be replaced by ordinary door, which are sold at any store.

A table for creativity with a lifting lid must be supplemented with a lifting and adjusting mechanism. To do this, take two thin bars with a length of 20 to 40 cm and strengthen them in a vertical position on the lid from the opposite side using another loop. They should be more powerful, since it is precisely on these loops all the load during games and classes.

To fix the lid in various positions, it is adjacent to the bars of 2-4 furniture hooks, depending on the lifting step. One sufficiently long bolt lead to the base of the frame so that they partially performed. These are bolts and will hold the cover in the raised state.

Adjust the location of the bolts will have literally on the eye. It is necessary to lift the tabletop so that the adjusting bars freely hung, and then mark the desired points for drilling.

For the manufacture of the table, it is best to use finished legs from any material. Screw them to the frame from the bottom, using the screws.

All parts of the finished product are treated with sandpaper before smoothness. Cover the pair of lacquer layers.

Cardboard Table Option

If working with a tree does not like, then a small children's table can be made from ordinary cardboard. To do this, you will need a large box from under household appliances and cardboard tubes remaining from foil or food film.

Cut the box with a stationery knife. Seam on the surface 5 parts with rounded edges for a tabletop size 55x35 cm. Cut them.

On 4 parts in the corners, tick the circle, given the diameter of the tubes. Gently reduce holes.
Slit parts with each other using the glue type of moment. For the fortress, please press the press and leave the workpiece until complete drying.