Snowflake from plywood with their own hands. Beautiful snowflake made of wood with her hands snowflakes from beads and beads

We will need:
1. plywood, large enough to make snowflake
2. snowflake pattern (click to download Snowflake stencil)
3. electric garland, you can use garlands working on batteries or network
4. drill and drill

First of all, you need to apply snowflakes on the plywood. You can use any which you like or take which we offer you. We printed stencils in the printing house on a sheet of paper A2 paper, cut off the snowflake, put it on the fane and circled.

Next, cut the snowflake from plywood using a jigsaw, the process of time consuming and requires care and accuracy. You can use both manual and electric logs. Observe safety regulations.

After the snowflake is completely cut, with the help of small sandpaper, we can treat coarse edges.

in those places where the garlands will be labels, we make holes, a diameter of a little less than the diameter of the garlands light bulbs. Light bulbs can be placed as we, in the center of the rays of snowflakes or around the perimeter.

Now it's time for painting. Pray the snowflake in any favorite color. We chose white.

It's time to secure the garland. Disconnect the bulbs, grind the cartridge of the garland in the well-done hole, and insert a light bulb in front of it. Since the holes are less than the diameter than the bulbs, they will hold and fall out.

Mode switch or other heavy elements fasten from the reverse side using the tape.

Greetings, my dear readers.

So today I will make a snowflake from the tree with your own hands. I wrote this article back in the New Year holidays, after I received a letter from UCoz, where the admins organized such an interesting contest:

The most creative is a contest!

What do we have to do:

• draw or make your own upside down from any material (the U logo on the snowfish - is welcome!);

• No nominations - only prizes!

  • 5 gift certificates in the amount of 5000 rubles online store Ozon

  • 15 exclusive secret souvenir gifts;

  • 5 lifetimes premium packages;

  • 3 individual audit of the site from a specialist;

  • traffic to the site.

I finally moved to the huge joy to the Wordpress, but I decided to leave the article yet - maybe someone will be interested :)

How to make a snowflake from the tree do it yourself

In order to do something, be something snowflake or, it is necessary to determine the final result of the finished product. That is, you need to clearly imagine what you want. And in order to do this, you need a drawing or at least an outline (sketch).

Snowflake from plywood - drawing

It certainly is very about, but I already have from what to repel.

I take a piece of plywood and drawing a small circle on it - I plan to place a logo in it.

Then blacks are the external circle - it will be the edges of the future snowflakes, and divide it into six equal parts.

And after a while I received a ready-made drawing of snowflakes from a tree

How to make a snowflake from wood with your own hands?

So, the drawing is ready. Hands in the legs, I take the jigsaw and start to "revel", and if you are accurate - cut down ...

And once ...

And two ...

And that's what happened ...

Snowflake from a tree drank and now it needs to span a little to remove "burrs"

Go to the next stage ...

How to paint a snowflake from the tree?

It was determined for a long time with the color and decided that he would paint in blue. After speaking almost an annual reserve of children's paint, it turned out like this.

At first, I thought that I would only paint the main part, but a little "frozen" - I decided to see and sideways to exclude "ipckles"

Well, now, all the above operations have done, waiting for the main layer when it gets dry - started drawing patterns. Artist from me "Ahov", so it turned out such a snowflake

A little controversial with the main logo, but after a small witchcraft it turned out very not bad! (you can't praise myself - no one praise).

So, friends, putting a littleheat, made a snowflake from the tree with their own hands and no plagiarism!

P.S.

Friends, I didn't become one of the three first winners, but received a comforting prize - 3 months premium package from UCoz, although at this time it was clearly realized that it was time to go to the WordPress :)

All success and I have to recall that in touch with you there was a true connoisseur of Hericalism - Alexander Alexandrov.

Snowflakes - one of the most beautiful symbols of winter and New Year holidays. They are made of various materials using most of the well-known techniques: cut out, fold, embroider, sew, knit, gossip, tinted. They decorate the interior, clothing, accessories, textiles, covers, notepads, postcards. "Snow motifs" can be found in decorations, souvenirs, toys, pillows, panels, carpets and many other things.

Cut openwork snowflakes from paper can each. And today we will tell, what other ways to make snowflakes. Choose your favorite option, prepare the materials and create the whole family of New Year's decorations!

Paper snowflakes

Cutting the paper snowflakes, you can use ready-made ideas from the Internet or come up with your own design. Remember that the thinner the paper, the air will be snowflakes.

Origami snowflakes

Snowflakes in Origami technique are not such openwork and elegant, like carved from paper, but they are strong and volumetric. To create such snowflakes, you will need special knowledge and email! And how to learn to understand the scheme, you can read in our article "Origami".

Snowflakes in the technique of quilling

Snowflakes in a quilling technique glued out of pre-prepared parts - strips of paper twisted in the tubes and flattened between the fingers in various ways. Quilling requires accuracy and a good eyelary, but the result is very impressive. In our article "Decor of the Easter Egg: Master Class" We have already talked about this type of needlework.

Cardboard or Plywood Snowflakes

Snowflakes needed to create volumetric decorations or toys, it is better to do from plywood or cardboard, then they will be strong and rigid. Using a ruler and a pencil, mark the outline or circle a ready-made pattern, then cut or drink - and the snowflake is ready! You can also make snowflakes from wooden sticks from ice cream or school lines. Such blanks can be painted, painting with patterns or decorate decoupage in the technique.

Snowflakes from felt

The felt snowflake will become a good Christmas tree, the original brooch, suspension for the bag, a needleer or stand under hot - it all depends on the technique of execution, your imagination and, of course, the thickness of the felt. Thick and dense felt - excellent material for flat snowflakes, which can be simply cut according to the pattern, and from a thin felt it is convenient to sew bulk snowflakes. It is possible to decorate products from felt by embroidery, rhinestones, sequins, beads and beads.

Snowflakes from thread

In the manufacture of such snowflakes, use the base (wooden plate, cardboard or foam) and pins (nails or pins), between which tightly stretch the thread. If the thread is pre-mixed with glue, you can get a rigid snowflake: just wait enough when it dries, and then remove the pins.

Beads and Beads Snowflakes

From beads and beads are made not only Christmas toys or other Christmas decorations, but also earrings, pendants, pendants, key rings. To create such a snowflake, you need beads and / or beads, as well as a fishing line, wire or a dense thread, a snowflake scheme, which is easy to find on the Internet, and a bit of perfection.

Knitted snowflakes

If you know how to knit with crochet and ever knit napkins, it will not be difficult for you to tie a snowflake, because similar schemes are used for them. To give knitted stiffen snowflakes, they should be starch.

Polymer clay snowflakes

Polymer clay - material with wide possibilities, from it you can make very beautiful snowflakes, for example, in the technique of filigree or extruder technique. In the manufacture you can be guided by our master class "Decoration with your hands to Valentine's Day", just change the shape of the product and color.

Snowflakes from glue

This is a rather simple way to manufacture snowflakes for which the glass surface and special glue (transparent, color or with sparkles) will be needed. Draw with a glue with a snowflake on the glass, you can pre-put a pattern under it. When the snowflake is driving, you can leave it on the glass - if, for example, you decorated the window - or carefully remove and hang on the thread.

In the comments, waiting for your ideas for the manufacture of snowflakes. Happy New Year!

All photos from the article

If you have plywood residue, you can use it as a material for the manufacture of various New Year's crafts. To do this, you do not need to have complex equipment at hand and possess the skills in woodworking, everything is quite simple and forces even those who have no experience in conducting such work.

We will talk about some of the products of products, and you can implement any of your own option by taking the workflow tip as the basis.

Necessary materials and tools

In order to make this or that product, you will need the following list of materials and devices:

Plywood	When choosing, consider the features of the made of crafts: for small elements and products of complex shape, it is better to use the sheets of a small thickness, for more massive structures you need a greater thickness material - from 10 mm and more. In addition, it is necessary to take into account the location, for options installed on the street, it is necessary to use a moisture-resistant phanener, and the usual option will be suitable for internal work.
Tool for cutting	Again, the choice depends on the thickness of the processed sheets, if for thin options and, then for thick plywood it is better to use either an electric jigsaw or a special hacksaw for curly cutting with a fine tooth
Needed sketches	If you know how to draw well, you can make all the drawings on paper and independently, but you can use ready-made options. On the Internet you can find a variety of solutions: and whole compositions from New Year characters, and snowflake drawings from plywood. You just need to choose the option that you like the most, and which you can embody
Paints	Make interesting and bright crafts, without deacting them, almost impossible, so take care in advance and about paints. If any option is suitable for internal work, then for external structures, weather-resistant compositions are needed, which should be well to resist adverse weather influences.

Tip!
If you have found a drawing less than you need - not scary, increase its scale to the desired and print in this form, all relations will be saved, and the parts are perfectly suitable for each other.

As for the manufacture of various crafts, there are two options - two-dimensional or three-dimensional designs. We will look at each of the species separately, since the process has some differences.

Two-dimensional products

If you are working with your own hands, you should follow the following recommendations:

• First of all, it is necessary to purchase the necessary material, for the street it is best to use a fan, glued with a bakelitic resinor apply laminated sheets that are well protected from moisture;

• Next, you need to make a sketch of the product on a scale of 1: 1, so you need to transfer the drawing to the large sheet. If you need a big santa frost from plywood - do it with your own hands it is problematic, but modern copying equipment increases the scale to the automatic mode in compliance with all proportions;

• The drawing is transferred to the phaneer or using copy paper, or simply sticks, if the product is large, and cutting directly on paper. Naturally, in the first case, the sketch can be used several times, and in the second only once;
• Cutting is made along the line, it is important to not allow substantial deviations, as it is negatively affected by the final result of the work. Next, you need to process ends using sandpaper: Remove the scope and pile, rounding the edges and make the surface as smaller as possible;

Tip!
In order to crack the material with cutting less, the surface is impregnated with a mixture of joinery glue and water in a ratio of 1: 2.

• The last stage - staining, it is better to initiate primer, and after coloring the product. Special attention is paid to the ends, they absorb moisture best and need special protection against adverse effects.

Three-dimensional designs

We will tell how to make sledges from plywood with their own hands. This type of product will appreciate children, as they can be used in winter.

The work process is as follows:

• First of all, you need to find or independently make a drawing of plywood sanke, as an example, we will show one simple option;

• You also need to cut the seat, it is best to take a 10-12 mm thick material with a thickness of 10-12 mm, its dimensions are shown in the diagram below. Cutouts on the sides and in front allow you to hold onto the seat and tie the rope, and the handle is perfectly suitable, if you need to roll small children;

• When cutting out the closest attention should be paid to connecting grooves and. The assembly of elements is carried out using self-tapping screws with a length of 35-40 mm, under which the holes are pre-chopped with a diameter of 2 mm;

Snowflake do it yourself from a tree: photo

For a dense fitting of parts, lead the pylon next to the lines that limit deep outstanding cuts. If they are too narrow, they can be expanded with a file.

Make a template for marking and drink cutouts in the second layer

Instead of drinking cuts over a paper template lines, circle made from trimming plywood pattern with a marking knife to achieve a dense connection of parts.

When drinking cuts in the second layer, the feet should not touch the lines of markup. If necessary, the width of the cutout can be adjusted later.

Cutouts are in halves

By dividing the third layer of two halves, mark and drink cutouts on straight edges, leaving a small allowance for fitting.

Drill a small hole

Thin drill Make a hole with a depth of 6 mm in one of the inner angles, where all three layers are intersect. Do not be discouraged if the drill will pass through, because no one will notice.

Snowflakes do it yourself - schemes

CSJA Gold Color Tree Life Wire Wrap Paper Drops Water ...

154.88 rub.

Free shipping

★★ ★★ ★★ ★★ ★★ (4.80) | Orders (1168)

Qifu Santa Claus Snowman Svetodoid Deer Merry Christmas Decor for ...