Battery trim under the window of plasterboard. How to close the heating battery: ways to hide the radiator with your own hands (105 photo ideas). Screens from glass

High-quality screen for the battery: how to make it right from drywall

Some new heating radiators look so good that they can be used on visible places. However, old cast iron analogs are able to significantly worsen the aesthetic parameters of the modern room. Such a disadvantage will not be fixed, if you carefully close the corresponding functional product with a design of plasterboard. For the finishing finish of the created outer surface, you can use paint, wallpaper, other decorative materials.

Restrictions on which should be remembered

You can add different protrusions with drywall. But already at the stage of preparation for the implementation of this project, the following important practical details should be taken into account.

The convector type heating system will work quite effectively in the case when free air access is provided to the instruments and nothing prevents it from subsequent free movement upwards. Locking these threads will not allow rapid heating. The owners of individual boilers will increase fuel consumption, or electricity. The corresponding holes should be present in the design of drywall.

Cast iron radiators emit in the infrared range. The presence of a solid partition that does not pass heat into the room is unacceptable. That is why it should create a major part of the design from drywall. Immediately before the radiator make a rectangular cutout. Gold metal or plastic screens are inserted into it.

Accident in the heat supply system. The melting of the snow that has fallen into the windowsill by chance. Cleaning premises. In all the listed situations, it is impossible to exclude water plasterboard. That is why it is better to use hydraulic types of such building materials to manufacture such trimbs.

How to sew a battery of plasterboard: Basics of technology and useful recommendations

Material consumption, additional adaptations, changes to the technique will depend on the specific conditions, architectural features of the room. But the following tips will be useful in most cases when it is necessary to persuade the radiator with plasterboard:

The least will need if you make a compact design. Here it is necessary only to provide the minimum distance of 10-12 cm from the surface of the heating device to the inner surface of the walls in all directions.
Before serving, you need to restore the damaged battery cover, paint it. You will need a revision of connections to the system of the pipeline, eliminating the identified faults. The wall defects are also eliminated, the cracks are closed on all areas that will be subsequently closed with plasterboard sheets.
Next, markup is made using braid tools and levels. When designing a box, it should be noted that it will be more durable if you install it on the floor. The lines are drawn on the walls and on the floor, so that the contours of the whole design accurately identified.
If you see the whole wall, you can hide not only the radiator itself, but all the pipes of the engineering system. In this case, the markup is also applied on the ceiling.
The carrier frame is created from steel galvanized profiles with a cross section in the form of the letter "P". They are connected to each other with screws. For fixing elements on the walls, dowels are used, which are installed in 20-30 cm increments. To bend profiles in the desired way, cuts can be made on their walls using metal scissors.

If the reference frame is created qualitatively, it will not be difficult to close it with sheets of drywall. Cutting this material on parts with the desired size can be performed using a conventional large stationery knife. Replace his blades on time to simplify work operations.
In order to seize any shape of a frame of drywall reliably, save a small step between individual screws, not more than 12-15 cm. To prevent errors, make it sequentially and immediately fix the cut parts. The angular parts (if available) are strengthened by further galvanized profiles "G" - shaped form.

It is necessary to neatly the studio, eliminate all the irregularities in the joints of the joints of individual elements. This can be done using a mounting polymer mesh and subsequent putty of such sites. Finish protective and decorative coatings are applied to the created smooth surface. The hole in front of the radiator is closed by a mesh screen.

Any communications that have been laid or are placed in plain sight have always been a problem. It is very difficult to enter them into the overall interior of the room. But it is often worth the problem - how to close the heating battery in the room. After all, it is necessary to maintain an important condition - nothing should be a barrier for a good impact of heat.

Options

There are many ways that allow you to close the heating radiators and at the same time provide a comfortable temperature mode.

If there is no such possibility, then the screen creation options are perfect. Namely - the design of the radiator in various ways that allow it to hide it. Several options should be selected:

Installing the mounted screen.
Creating a wooden - removable element.
Use plasterboard plates - for box.

Preparation of heating radiator

It should be noted that the last item is the most popular today. At the same time, it cannot be considered as the most perfect. The fact is that the creation of a solid box is a rather controversial decision. After all, with any breakdown, leakage - you have to disassemble it completely, which is very uncomfortable.

Therefore, the first thing you need to carry out a revision of the heating system. Check the place of the joints and connections, inspect the radiator to leak or break. Only after such prophylactic work and replace damaged areas are the direct installation of the design, which will close the battery.

The design to hide the radiator must respond to the following parameters:

Box for gypsum batteries.

Warm air flows should not meet the obstacles on their way. This ensures uniform warming of the whole room.
All threaded connections and air and water discharge cranes should be easily accessible.

When creating a closing structure, you need to provide access to regulatory elements of the radiator

Attention! Very often the option is allowed that you can meet in some apartments. It lies in the fact that heating radiators are completely hidden by HCL plates. This is unacceptable.

Screen for battery

This option is the simplest and most popular. Screens may be different appearance. Often there are designs made of metal. Severe two types:

Hanging. They are simply superimposed on the battery without having any additional fastening. Therefore, with any contact may fall.
Embedded. Inserted into specially prepared boxes of wood or drywall. Very convenient option. In addition to manufactured from metal - there are plastic, wooden and from HDF (high-density wood fibreboard).

Which option to select depends on the specific situation.

Creating a box from GCC for an embedded screen

This option is most common. It is quite convenient to do the box during the trim of the walls of plasterboard, then you can immediately create a frame for it that will be included in the overall design.

Stage First: Preparation

Before hiding the heating radiator, it must be prepared. It is very convenient when modern batteries are used, but with cast iron - you have to tinker.

With the help of an iron brush remove the old layer of paint.
The surface is degreased.
Check the connections, nuts and seams. If necessary, tighten or change.
Color the surface with a high temperature threshold with paints.

Usually, through the holes in the closing design battery, it is still partially visible, so it is impossible to leave the finish of the device itself

Prepare the necessary tool:

perforator with a brown or a shock drill with drills;
screwdriver, scissors for metal or jigsaw;
construction knife and level;
sandpaper with bar;
hacksaw;
tassels;
capacity and set of workshops;
rule (roulette) and pencil.

The following materials will be needed:

Plasterboard plates.
Perforated corner.
Metallic profile.
Grid - Serpenty.
Self-tapping screws and dowels.
Primer.
Putty.

Materials and tools required for drywall

On a note! Sew the battery plasterboard is not as easy as it seems. At least a minimum work experience with a metal profile and plates of GKC is required.

Stage Second: Marking

Defined how the box will look like - hang in the air or stand on the floor:

When the box is fitted with a sex coating, then they immediately measure and mark the three main lines - two side and facial.
If it is hanging, then beaten off the distance from the floor. On the wall marked the line and check it in terms of the level.

Then make markup on the walls. They do not forget that from the edge of the elevated box to the edge of the radiator - should be at least ten centimeters.

As a result, it turns out a rectangle that will indicate the edges of the fastening of the future design.

Stage Three: Creating a frame

To do this, use a metal profile. Installation technology:

The guide profile is applied to the lines designated on the wall. They are cut in advance at the desired height. The drill is drilled by several mounting holes. Make it so that the mark remains on the wall.
According to these points, the holes are drilled in which dowels insert.
The profile has places of attachment and fastened with screws.
Thus, all parts of the metal frame are installed. Do not forget to fasten them with connecting elements.

Tip! Between the metal profile and the surface should be provided for laying a special depreciable material.

A metal frame must turn out to be securely attached to the base. It is better to immediately close the heating pipes - for greater amenities, a removable option is thought out.

Stage Fourth: Overall

The further process will be completely simple, if compared with those works that have already been carried out.

To close the heating point in the room, make a markup in advance on the sheet of plasterboard. Using hacksaw (electric jigsik) cut it into the desired items. Small parts can easily cut the construction knife.
Immediately calculated and place under the screen. It can be of different sizes, most often use 60 * 90 cm and 60 * 120 cm. It is better to measure the selected version of the internal frame. From the result obtained, a couple of millimeters are removed.
For greater convenience, each carved area is tagged with an invalible side. Or do differently - immediately produce their installation.
Details closed the necessary places. For this use selflessness. They are screwed into fifteen centimeters.
Screws screw in a closure with a surface.

Stage Fifth: Finish

The final stage of the finish begins. It lies in the fact that the created box is treated with putty. You need to close all the seams. The process looks like this:

The seams are slightly expanded, for this, a construction knife is suitable.
The sections are ground.
Perforated corners are imposed on the corners.
External seams are labeled with a mixture and impose a grid-sickle.
The finishing layer of putty is applied to the surface.

It turns out a design that has a "window" in which the screen is inserted. Thus, it is possible to close any heating battery.

On a note! It is often possible to create a fairly large box that can be used to store unnecessary things.

Wooden design

If a wooden design is suitable for the room, then it can be done completely removable (shown in the photo below). So, it is possible to close the radiator of heating and not to carry out numerous works.

Marking is removed. Consider pipe supply places.
A structural box is made, which is immediately equipped with an external crate.
At the external perimeter, corner hooks are installed, the mounted part of which is screwed to the wall.

Now it remains to put the box in your place. It will also be easy to remove it.

Conclusion

To close any heating element use special screens that can be made independently. The main thing is to correctly calculate the size of the structure and perform the framework.

Production of battery packs in the kitchen

Introduction

We continue comprehensive kitchen repair with your own hands. The manufacture of the battery pack in the kitchen had to be done because of the old "harmonica" type batteries, which have a not at all presentable appearance. The box is made of drywall on a metal profile frame.

For the box, we will use a metal profile for drywall structures and moisture-resistant plasterboard (G CLEB).

Battery box material

For the box framework, we will use the profile of Mon (PNP) 27 × 28 (profile guide ceiling) and the profile of the rack PS 60 × 27. To cover the framework, we use the moisture-resistant plasterboard of the GKVL with a thickness of 12 mm.

Before purchasing the material, draw a sketch of the future box. In the sketch we take into account the two holes for air circulation. One hole at the bottom of the box in the battery area. Second, large rectangular holes over the lower hole. Subsequently, close them with a decorative perforated screen.

Production of a box for batteries in the kitchen is starting with a frame

Place the frame of the box on the walls and the floor. On the markup, fasten the profile of PNP 27 × 28. Between the profile and the wall, we lay the special sound insulation tape of the DichunSband type.

Use a perforator for fastening profile. Holes drill simultaneously in the profile and wall, holding the profile with a second hand. The profile of a dowel is mounted with nails (dowel type K) or 6 × 40 dowels with screws. The mounting step is arbitrary, the main thing that the profile is tightly kept on the wall and the floor.

The box of the box is made from PS 60 × 27 profile. It is perfectly inserted into the profile of PNP 27 × 28. All rack profiles are exhibited by the construction level. We connect the profiles of metal metal (type LN) with a length of 9 mm.

The corner of the frame is made as in the photo. For an angle, you can use PNP or PS profiles.

For air traffic, we plan two holes in the battery area. At the edges of future holes, mount PS rack profiles. These rack profiles connect jumpers from the same PS profile. To connect profiles, use the connection as in the photo.

The finished frame of the box should be durable, should not be fused and you should calmly rely on it without danger to destroy it.

Conduction of the frame of the box with plasterboard

Ready box frame with plasterboard. The plasterboard is cut as follows. Follow the sheet of plasterboard. Construction knife Slide the sheet according to the markup on one side. Peel the sheet and roll it from the second side.

To the frame of the sheet is fastened with self-reserves of plasterboard metal 19 mm long (TN type). Fastening step 200 mm. From the edge of the sheet to self-pressing should be at least 5 mm. Self-tapping caps are drilled into a sheet of 2 mm. The plasterboard sheets must be shy only in the middle of the rack profiles. The plasterboard sheets have a facade and back side. On the back of the sheet its marking is applied.

At the joints of the sheets you need to cut a 5 mm chamfer for better shtkock. Corners of the box protect the perforated corner for drywall structures.

Putchal box

The finished box for batteries from plasterboard needs to be placed. To be discharged to drive it acrylic primer. The seams between the sheets and the adjoining of the sheets to the walls are punctured by a painting grid.

Putchaw box Start from seams and hats of fastening screws. After drying the seams, the entire box is put on two layers when finishing with wallpaper and three, four layers with further painting. I recommend that the putty is old LR +. Play box is needed together with putty wall kitchen.

Finishing Koroba

In the repair of our kitchen, we supplemented the decoration of the box with a window sill on it. The white window sill created an extra surface in the kitchen and combined well with the window sill window.

Several simple solutions close the battery

plasterboard thickness of 12 mm;
profiles of two dimensions: 60x27 and 27x28;
serpenta;
perforated corners;
fasteners: Self-tapping screws for metal and plasterboard, dowels 6x40;
putty.

Reduce a large number of smaller holes. Diameter less centimeter is nonrenized: Heat will be with difficulty, and the holes themselves will be quickly clogged with dust and will need clean.
Make in the box of a kind of windows and insert plastic ventilation grids in them, which are used in the bathroom and in the kitchen.

GLC is cut according to exact size. For this use the stationery knife.
The elements are screwed onto the profiles with self-assemblies with a frequency of 3-4 pieces on the temporal meter. It is necessary to draw the caps by 1 millimeter so that they become flush with a sheet, but did not break the cardboard coating.

Difference conducting boxes from, say, Niche has only one thing: To close the battery with plasterboard, but not to lose the overwhelming amount of heat generated by it, the vents must be drilled in the sheets. They can be done a drill with a crown nozzle. The recommended hole diameter is 5 cm, but such "holes may not look too attractive. Alternatively, you can choose one of the two directions: The one who gathered to make a battery box with their own hands, first of all, should pay attention to the windowsill over it.

It can cover the entire design of the design entirely, and even act a little behind her edge. This requires not only the aesthetic side of the case, but also practical: The box sticking out from under the windowsill will constantly drop home, in connection with the service life will be reduced. To embody the ideas, we will need: In fact, there is a way out!

Need to do dancer from plasterboardwhich will close from the eye all the problem space from the floor to the windowsill. This solution to the problem has a huge plus. As a result, it will be very beautiful, including due to the presence of an overhead lattice, which I recommend chosen under the color of the furniture.

perforator with a brown for 6 mm
screwdriver
scissors for metal
level direct
roulette and pencil
stationery knife with replaceable blades
stapler

Radiator that some are not shy to compare with a log in the eye performs in the apartment the most important featureAnd it is impossible to forget about it, because it is impossible to survive a harsh winter without proper heating. That is why all attempts to reorganize the radiator should not go beyond common sense. It should be noted that the last item is the most popular today. At the same time, it cannot be considered as the most perfect. The fact is that the creation of a solid box is a rather controversial decision.

After all, with any breakdown, leakage - you have to disassemble it completely, which is very uncomfortable.

How to close pipes and heating batteries drywall

hammer drill;
level;
plumb;
construction corner;
spatulas;
roller;
screwdriver;
roulette;
scissors for metal;
stationery knife;
nozzle mixer.

In addition, a box markup is made on the floor so that the end of the front side of the front side performed 15 cm relative to the radiator.

If we consider the last option, then it is the most popular. This is due to the simplicity of assembly and inexpensive material that is used for the design.

But it is impossible to call this method perfect, as with unforeseen breakdowns or leaks, the box will have to completely dismantle.

buy and fix on the radiator mounted screen;
create a wooden element that is attached over the radiator;
build a box of plasterboard, which disks the battery.

To give the placement of the modern species, it is enough to build a beautiful screen of plasterboard. He will hide an old and unsightly battery from prying eyes. It is worth noting that work can be made with their own hands, and the cost of materials is small. Some people inhabitants doubt whether it is possible to close the batteries by plasterboard.

Consider in detail this question. After that, you can proceed to the design finish of the box. But before starting this step, it is necessary to conduct a certain preparation.

The entire plasterboard box must be scaled, to handle the skin and primer deep penetration.

Twelvemillimeter plasterboard sheets;
Metal profiles;
Serpenta;
Perforated corner;
Metal screws;
Self-tapping screws on plasterboard;
Dowel.

It is advisable to erect decorative wall if, in addition to masking radiators, it is necessary to decide how to close the heating pipes with plasterboard. There are not so many spaces at the same way, but the appearance of the room wins very significantly. Options demonstrating how to close the battery with your own plasterboard, are presented in the photo below.

Both ways have their advantages and disadvantages: Mount the frame starts with the installation of UD profiles 27 × 28 along the inside of all lines of markup on the floor and wall. Mounting step - 15-20 cm with uniform distribution of points on all lines. The choice of fastener species depends on the base materials: Screws on wood, dowels for concrete or anchor-butterfly for hollow building blocks.

Battery Gypsum Cartridge

Important note: The front wall of the structure should be at least 10 centimeters from the front side of the battery, otherwise the installation of the removable screen on the front panel will not be possible.

The middle part is flexing down, the extreme parts are cut, based on the profile width. The profile segments are fixed to vertical shakes along their edges at right angles.

Screwdriver.
Perforator.
Roulette.
Level.
Scissors for metal.
Stationery knife.
Wall plasterboard.
Profile under plasterboard.
Sherryanka.
The angle is perforated.
Dowels and selflessness.

The same principle is observed and when assembling a wooden frame. Unless individual elements are connected by mounting corners. Experienced hosts perfectly know that heating devices can not only perform their immediate functions associated with the heating of the residential premises, but also decorate its interior with their appearance.

Today you can find many different options for decorating household heating devices, but the most common are decorative panels for heating radiators.

How to close the battery of plasterboard - a step-by-step guide for the installation of a box

Each stage of work has its own characteristics - for example, in the process of preparing the base, it is necessary to carefully remove the old coating and eliminate any contamination. If there are certain drops on the base wall, it must be aligned to the perfect state using gypsum plaster. Also before hiding the heating batteries with plasterboard finally, it is worth covering the wall, because after installing the box the ability to perform this work will not be.

The design of the masking structure always begins with the selection of its device.

So, there are two main types of structures - a plasterboard box and a drywall decorative wall, which will be hidden by the radiator. Each design has its own features and scope of application.

The sequence of work required to arrange a masking structure for radiators includes several stages: the next installation step is cutting drywall sheets on the part of the appropriate size. To enjoy the battery of plasterboard, you need to attach the sliced \u200b\u200belements to the frame of self-drawing with a step of 15 cm. Spin the screws need very carefully - with a high speed of the screwdriver, drywall damage can occur.

In addition, the fasteners hats can simply fall into the material and thereby bring it into disrepair. Dimensions of the box must be selected depending on the size of the battery itself, which will be masked. When choosing, it is necessary to consider that the edges of the design should be located at a distance of about 15 cm from each side of the battery.

The box can be installed on the floor or attached to the wall, which also needs to be considered in advance.

In apartments built by the hands of Soviet workers, as in some modern buildings, cast-iron heating radiators are installed. These elements are not always suitable for the overall interior of the room - in this situation you need to think about how to close the battery with plasterboard and does not reduce the level of heat transfer.

According to the existing residential code and redevelopment rules, it is impossible to hide the heating systems directly into the wall. But it is possible to close them with an additional wall from an alternative material.

How to hang the battery - on plasterboard and removable screen

The trimming of batteries of plasterboard is used more often - this material allows you to quickly and simply simply hide the placing flaw, make the appearance more attractive.

How to fix the battery for plasterboard - stage markup

The markup of the future design is carried out using:

measuring tools - roulette, ruler, corner;
design tool - simple pencil, marker;
accurate tool - Construction or laser level.

Conducting this stage, it is desirable to adhere to the exact dimensions, limited by integer centimeters. Millimeters apply only in the case of a particularly accurate design, for example, under the established interior design.

Before sewing the battery with plasterboard and get rid of its unpleasant species, you need to decide under what embarrassment methods are marked:

the box is a simpler and fast work method (only the battery area is closed and, literally, 12-20 cm beyond it);
the wall is a more time-consuming method (a completely wall is closed, which has a radiator; if the heating device is set by the window, the slopes must be performed).

In terms of work, the injection of batteries in the first method is more simple: fewer material is used and a small number of building processes is carried out. In the second case, even fewer building processes are used, but more material is used.

Dog for radiator

When the device device, the design takes a little space, closing a little more space than the radiator itself. The depth of such a box depends on the width of the heating device (most radiators already than batteries with metal plates).

Note! The edges of the design must be over the edge of the radiator at least 10 cm. - Otherwise it will not be possible to install a removable screen on the front side.

Control instructions:

Depending on the desired design position, a horizontal band is carried out. If the box is hanging - donate the distance from the floor and using the level of the markup line. If the design will rely on the floor - there will be 3 lines (two along the edges - depth, one front - edge of the design).
To the lower face you need to install the corner and spend vertical labels - we achieve direct angle. With the help of the level, bring vertical lines to the desired size.
On vertical lines, the same labels are noted, between which the connecting segment is carried out.

As a result, a square or a rectangle should be turned out (in the case of support to the floor - an additional base markup).

How to close the battery plasterboard - the method of the wall device

Conducting the placement of the room and thinking how to close the batteries of heating and pipes by plasterboard and make it correctly, the decision about the device alternative wall comes by itself.

The essence of the solution - together with the radiator, the entire surface is closed to which it is attached. This method is wasteful, as you can do in small volumes of the material by setting the point box. But the wall is the only way to hide the heating device from the room with your own hands completely.

For the wall of the wall, the framework is based on the entire height of the room:

Using the level, several vertical lines are performed based on the frame. Step - 60-100 cm. Mandatory lines under profiles in the corners of the room.
From each vertical line it is necessary to continue on the floor. To do this, use the corner. The depth of floor lines is equal to the width between the main wall and alternative.
Similar to the floor, lines are carried out on the ceiling - equal depth and strictly parallel.
Recent marking lines are carried out on top and bottom of the heating device, at a distance of 7-10 cm.

On the sides of the radiator, there is also a markup - on the perimeter of the device, the profiles are needed to which the removable screen will be installed. But in order to get rid of extra work, it is possible to carry out basic markings (which for the entire height of the room) directly on the sides of the radiator.

Metal frame under the wall

Before close the heating battery with plasterboard, decides this room interior, you need to arrange a frame. For its construction, metal profiles of a chawller shape are used, a width of 60-70 mm.

In total, in the process of performing work will be needed:

profiles - as the main frame;
screws (40-60 mm) - Construction fastening;
dowel (40-60 mm) - fastening in the surface;
metal scissors - for cuts, if necessary, flexing the metal;
pliers, screwdriver, drill or perforator - auxiliary tool.

The first profiles are fastened, which are adjacent to the wall.

On our site you can see a lot of video on the topic of carcases under plasterboard, but the main instruction is performed as follows:

metal profile is assigned to any side or center to the markup line;
a small mark on the wall is left screwdrived;
the perforator is deepening under the size of the attachment;
a dowel is inserted into the performed hole;
the profile is assigned to the prepared place;
mounting is performed screw.

After prehasting the metal to the wall, the backs are made in 15-25 cm. The holes are prepared immediately for the entire profile.

The described process attacks all the necessary parts of the frame. In the case of attaching an angle of two elements, you need to cut the necessary parts with metal scissors.

When parts that are attached to the wall are installed - go to the depths of the frame:

cut parts of the profiles of the required size;
cut on the place of folding both edges of the element 4-5 cm;
bend the middle down, and the sides are cut on the width of the sheller shelter profile;
fresh segments to the edges of the main long elements at an angle of 90 degrees towards the room.

Last part - connecting the upper and lower short parts, elements.

Note! With the device, the closing wall battery uses long vertical metal elements, so two short tops and the bottom is not enough - you must at least 4-5 pieces.

The frame in the finished form should represent a strong design, do not fumble. If the frame is staggering, it means that the mount is not performed qualitatively, or there is not enough additional short elements.

Covering batteries plasterboard

The most difficult stages of solving the issue, how to close the heating battery and do not deprive the heat room, remained behind. If everything is prepared, the installation is an easy procedure.

Plasterboard mount is carried out according to the following method:

the sheet of material is attached to the metallic base;
an intensive tool marks the place of the cut - so the material is placed on the necessary pieces;
the prepared part is attached to the corresponding part of the frame and is attached to the screw.

The step of the screws of the screws when fastening the material in the battery box is 10-15 cm, an example of the location of the fasteners can be viewed in the photo above.

It is better to prepare and mount on one part of the material, if you cook everything at once, you can be mistaken because of the angles speakers in some places.

Note! When screwing into a screw, it is important to feel the measure - if you put the fastener element too deeply, you can damage the front side of the plasterboard.

The removable screen should close the radiator for airing and transmitting heat into the room. Its first part, internal, attached to the metal before working with plasterboard. The main material is then suitable, and the last stage dresses a removable, external, part of the screen.

Learning how to close the battery in the room with plasterboard and not spoil the interior, it is important not to apply cardinal new colors. The best option is to place a box or an alternative wall in the common paints of the room. But first you need to prepare the surface under the final finish.

The finishing process takes place on the following principle:

Seaming seams between parts of drywall (see also an article about putting the seamskarton seams). For this purpose, a small piece of sickle grid is imposed on the seam, then the joint is embarrassed by the putty.
Sealing the fastener element. It is carried out by a similar method - the serpent and putty.
Putclowing of the whole design (see also an article than to put plasterboard - the choice of putty and technology of its application). With the help of spatulas, the entire surface of the product is put off, whether the box is either the wall. When the mixture dries, it is aligned, reading the shallow sandpaper.

The final stage is the finish finish of the product - often it is a painting or pasting with wallpaper. It is better to use that material that more corresponds to the general interior of the room if its price is, of course, within the framework of the planned budget.

Old cast iron batteries are difficult to call a sample of aesthetics, so many apartment owners want to hide them, enters the interior as much as possible. A good solution is the box for a battery from plasterboard, which you can mount without attracting professional builders.

Plasterboard completely closes radiators, it is a convenient processing and a fairly cheap material. But in working with it requires certain skills. We hope this article will shed light on incomprehensible moments and will help you successfully solve the task.

Pros and cons of plasterboard structures

Our compatriots have long been trimmed by plasterboard batteries, so in this area there are many useful developments. Why is this material so popular?

Here are the main advantages of drywall:

Ecology (harmful substances in the premises are not allocated, and the fire-resistance of the box is very high).
Multivariance (in construction stores presents an extensive range of plasterboard varieties).
Budget (material is very cheap).
Easy installation (any adult man can cope with the task).
Spaciousness for fantasy (you can make the designs of any degrees of complexity).

Before you do the trimming battery with plasterboard, you must learn the whole truth about the lack of such a decision. With some things you will come across in the installation process, others will appear during the operation of the box.

So, minuses:

Fragility (the material will easily crumble, so you need to work with it).
The need for additional finishes (after installation is arms with a spatula).
Low moisture resistance (from water plasterboard breeds, swells and deformed).
Features of storage (putting a sheet vertically, you will find out with the times that he began to be twisted).

Preparatory work and markup

Decided to sew the heating device yourself? Any finishing work requires serious training.

Let's start with the tool selection:

building level;
metal knife;
drill (welcome the presence of a screwdriver nozzle);
passatia;
perforator;
dowel and screws;
role corner;
pencil;
roulette.

In addition, you will need plasterboard sheets themselves, putty and P-shaped metal profiles. Then you need to choose a design sketch. You can build a locker under the heating device (standing option), or make sure that the box hung over the floor. Make sure the battery has a decent view. If the old paint has shut, it needs to be fully construed and re-paint the device.

Marking under Klavs

Having waited when the paint gets dry, proceed to the markup. You will have to make accurate measurements of the battery (errors are allowed within the millimeter).

Use such a toolkit for this:

roulette;
building level;
golbal line;
pencil.

The width and depth of the design depend on the size of the radiator. At the edges, the minimum indent should not exceed 10 centimeters. Narrow window sills need dismantling, since the gap between them and the battery should be at least 3 centimeters.

Drawing marking is conditionally divided into three stages:

Drawing horizontal lines. Apply the line you will be along the hanging level. If you plan to install the "standing" box, draw three lines at once (depth and front edge).
Applying vertical marking. Attach the carbon to the bottom face, read the perpendicular. To apply the markup of the desired size, use the level.
Compound markup. Lines must be closed over the battery. The combining function carries a horizontal segment.

Make sure that you are a square (or a rectangle), the vertical lines of which correspond to the plumb. Double check the accuracy of the markup - it will not be able to correct the shortcomings.

Installation of carcass

Before closing the battery with plasterboard, it is necessary to mount the metal frame. You have profiles, dowels and screws, which will be fastened to the future design. Armage with scissors for metal, perforator, screwdriver and passage. First you need to cut and fasten the bearing elements, they are mounted on the wall as follows:

P-shaped profile with any side pressed against the wall.
Little note is done (use a screwdriver).
Under the fasteners dried holes.
Dowels are inserted into the holes.
The profile is pressed against the right place.
Screws are screwed.

The openings in the profile are placed in 15-25 centimeters increments. Make marking in advance, otherwise you will experience a number of inconvenience when installing. Now fasten all the cooked guides on the wall. On the angular joints, use scissors for metal. The next step is the formation of the depth of the box.

Procedure:

Cut profile pieces of the desired length.
At the edges of the bend, make five-meantime cuts.
Bend the middle down.
Cut the sides, focusing on a chamber shelf.
Attach the fragments to the edges of the vertical guides at right angles (make sure that the segments are focused inside the room).
Connect fragments with long profiles.

It is time to check the quality of work. If the design is walking, you did something wrong. For example, "regretted" short items either made a mistake when installing fasteners. When installing long fasteners, it is better to strengthen the frame with short segments (there are enough 4-5 pieces), then you will like the result.

Spin screws carefully, otherwise damage the profile. The frame is left a peculiar window to install a removable screen. So you will provide a permanent influx of heat in the apartment.

Work with plasterboard

Working work remained behind. Now we hide our battery under drywall, and for this you need to cut rectangles of the corresponding sizes.

Sequencing:

Attach the plasterboard sheet to the profile frame.
Apply markup on the surface of the sheet, tick the locations of the cuts.
Take the stationery knife and gently cut the elements according to the size of the box.
Prepared fragments lean to "its" parts of the structure.
Secure plasterboard rectangles with screws.

Plasterboard, which closes the battery, very fragile, so the knife should be sharp. There should be 3-4 self-press on the mesmering meter of drywall. Hats are taken up per millimeter - so that they do not break the cardboard coverage.

Important moment: the room should get warm. You can solve the problem in two ways, the easiest of which is the drill of the ventilation holes in the sheets (their recommended diameter varies within 5 centimeters). A more aesthetic solution seems to install a removable lattice. If you decide to equip the front wall with a plastic screen, pardize with patience and additional fasteners. Plastic sometimes cracks, so work with it neatly.

Final finish

Now you know how to sew the battery of plasterboard. To purchase a finished look, it must be properly separated.

Algorithm of actions:

The joints between the sheets of plasterboard are carefully close. You must get a smooth surface prepared for further processing. To begin with, you will need to impose on the joints-sickle. After that, the surface is sweeping.
Similarly processed places in which mounting elements are installed.
Want to strengthen the angles and make the lines clearer? Purporated corners on drywall.
The box is sweeping.
After drying, the wall is aligned.
The final stage is grinding (for this it uses a fine-grained benchmark).

Having coped with the finish finish, you can proceed to the design of your box. The technique of finishing will depend on the features of the interior and the total colors.

Choosing a type of construction and markup features

Hide the heating unit for plasterboard can be two main ways: build a box around the radiator or hide it behind the decorative wall.

The choice of one or another technology depends on the plan of the room and the location of each particular radiator.

The first way, box, relevant, if the battery is on the surface of the smooth wall. Install the box with your own hands easily and quickly - this method is economical, because the radiator itself is closed directly, and therefore the space of the room suffers less.

The design of the box assumes that its edges will act beyond the battery of about 10 to 20 centimeters on each side. Specific box parameters depend on the size of the radiator.

The box is two species: it can either hang on the wall (the floor will remain under the box), or stand on the floor. The choice of design depends only on the designer solution in a particular interior.

After determining with the design of the box, you can proceed to the wall markup.

If the box should hang on the wall, then first lay the desired size from the lower edge of the radiator and carry out the level of the line, meaning the bottom of the design.

Then, with the help of the corner, the side walls of the box at a distance from the edges of the battery. We postpone on these lines the same segments that are set for the upper boundary of the radiator, and connect the horizontal line. All lines necessarily check the level.

If the box will stand on the floor, then you need to start with the upper boundary of the design, and it is already to postpone the lateral walls.

Plus, on the floor, it will be necessary to place the parameters of the base of the box so that the front limit performs for the front surface of the battery.

The layout of many apartments is designed so that the heating units under the windows are installed in the niches. In this case, it is worth covering the battery using a second type of design, an alternative wall.

However, there may be a desire to completely change your interior and get rid of the type of batteries in general. Then it will be necessary to build a plasterboard wall for the entire height and width of the room.

Such a way to hide pipes by plasterboard will require high costs in terms of consumption of material, but only it allows you to fully hide the radiator from the eyes.

Starting the preparation of the framework is needed from the markup of vertical lines for metal products. Be sure to lock the profile racks in the corners of the wall. Over the entire length of the wall, the pitch should be from 60 to 100 centimeters.

To avoid additional metal profiles, two vertical racks are recommended located on the sides of the radiator sewn at a distance of 10 to 12 centimeters from the edge of the battery.

Vertical lines should be continued in the projection on the floor and the ceiling, the depth of the top and the base should be equal and in centimeters to be the depth of the radiator plus 10 centimeters.

The final stage of the markup is the holding of two horizontal lines by 10 centimeters above and below the radiator boundaries.

Framework, installation of construction and finishing works

Before close the heating batteries with drywall, it is necessary to equip the framework frame. For mounting the frame, we use the chapel metal products with their own hands, the width of which is 60 to 70 millimeters.

First, it is necessary to secure profiles that will lay down to the wall. Technology is as follows: the profile placed the wall and the screwdriver placed the wall to future attachments, which should be at a distance of 15 - 25 centimeters from each other.

The dimmer is deepened by the perforator, based on the size of the dowels used for fastening. The dowels themselves are inserted into the resulting holes, pin the profile to the wall and fasten with screws.

When all profiles are fixed on the wall, proceed to the creation of a frame volume. For this, the metal cutting is cut into the length of the length, the resulting parts of the profile with both edges are caught with 4-5 centimeters at the scene.

The middle part is flexing down, the extreme parts are cut, based on the profile width. The profile segments are fixed to vertical shakes along their edges at right angles.

If you need to sew the whole wall at its height, then such bulk elements need to be fixed in a step of 50 to 60 centimeters along the entire length of the vertical racks.

The last answer is attached another series of vertical racks, which will be the basis of an alternative wall, and to which plasterboard will be attached.

Important condition: The framework of the design designed to close the pipeline must be strong and stable, and in no case should not be fused.

Plasterboard sheets are attached to the mounted frame with screws, the distance between which should be 10 - 15 centimeters.

While screwing the fasten, so as not to damage the material.

After the cutting frame of the frame, the "window" remains in the design, in which the radiator is visible. A removable screen is mounted in it, providing hot air from the battery to the room.

The inner part of such a screen should be fixed in the frame for even working with drywall sheets, and the external part is attached after the main work on the construction of the design to cover the heating battery with plasterboard.

Preparation of the draft surface under the finishing materials passes from the following technology.

First, with the help of sickle and putty, the seams are close between plasterboard sheets and screws, which attached plasterboard to the frame.

Then the entire design of the box or wall is sweeping. After drying, the surface is watched by small emery. Everything is ready for finishing finish: painting or salabing with wallpaper.

Unsuitable radiators in modern repairs should not spoil the interior design. With the help of simple installation technologies, it is not difficult to independently change the appearance of the apartment, hiding the heating pipes and radiators for plasterboard.

The main thing in such a matter is to accurately make the necessary calculations and carefully embody your project into reality.

Battery trim under the window of plasterboard. How to close the heating battery: ways to hide the radiator with your own hands (105 photo ideas). Screens from glass

Options

Box for gypsum batteries.

Screen for battery

Creating a box from GCC for an embedded screen

Stage First: Preparation

Stage Second: Marking

Stage Three: Creating a frame

Stage Fourth: Overall

Stage Fifth: Finish

Wooden design

Conclusion

Production of battery packs in the kitchen

Introduction

Battery box material

Production of a box for batteries in the kitchen is starting with a frame

Conduction of the frame of the box with plasterboard

Putchal box

Finishing Koroba

Several simple solutions close the battery

How to close pipes and heating batteries drywall

Battery Gypsum Cartridge

How to close the battery of plasterboard - a step-by-step guide for the installation of a box

Pros and cons of plasterboard structures

Preparatory work and markup

Marking under Klavs

Installation of carcass

Work with plasterboard

Final finish

Other solutions

Choosing a type of construction and markup features

Framework, installation of construction and finishing works