Facing the ground floor of a private house. The most beautiful options for finishing the house of the house in photodiments. Video: Installation of base thermopadals

5 / 5 ( 1 voice)

If you build reliable and at the same time a presentable house, take care of the trim of the base. Using a variety of types of materials, you can not only strengthen and insulate the upper part of the foundation of the building, but also decorate it, giving the structure a representative look.

Finishing base houses with their own hands

Making the base part of the private house, it is worth remembering that it serves not only to decorate the building, but also protects the foundation and walls from unfavorable natural factors. To properly select a facing material, you should know that the building base is three types:

Erected in the same level with the foundation and facade of the building. At the same time, give preference to thin products, such as siding, panels or tiles.
Speaking over the perimeter of the building walls. Choosing a finish, remember that the coarse part of the house can visually drag perception. The budget decision in this case is the-cement-sand plaster. You can make a lining with decorative brick installed on the edge.
Watching inside. This option allows you to apply any kind of outdoor insulation and decorate the building without a disruption of visual equilibrium.

The base is the lower part of the wall of the building, hailing it throughout the perimeter.

A separate topic in construction is the cladding of the base of the frame cottage installed on the pile-screw or bond base. Such a structure enters the discharge of a terrace building that does not have direct contact with the surface of the soil. The house is blown away from all sides with winds, and also does not have thermal insulation gasket with soil. As a result, the cool and raw microclimate indoors.

Therefore, finishing the base part of the pile base is designed to perform a number of tasks and includes:

conducting waterproofing of the climbing of the foundation (woodwork) made of wooden vehicles or metal profile;
arrangement of mounted or stationary (on auxiliary belt base) design;
installation of insulation around the perimeter with careful sealing of mounting seams;
facing the outer surface with decorative elements;
the arrangement of concrete or stone scene protecting the construction of excess moisture.

Important! The installation of heat-saving panels ensures maintenance of a comfortable temperature regime in the room.

It is precisely the finish of the base of the private house that is not only the above functions, but also prevents its destruction and acts as an excellent designer solution in the decoration of the building

It is possible to produce heat insulation of the base house of the country house with:

polymphax;
polystyrene foam;
polyurethane foam;
asbesto-cement plates;
sheet slate with insulation layer.

Independent installation, without the involvement of labor from the part, will cost you cheap, save financial resources and nerves.

Options for finishing the base

Depending on the tasks set, the cladding of the base part of the private house performs the following functions:

decorative, providing a neat appearance. Outdoor facing allows you to maintain in order of surfaces exposed to rain, ultraviolet and other natural factors;
heat insulating, providing comfortable thermal regime in the room. The insulation of the base decreases the effect of temperature fluctuations.

Regardless of the type, the setting of the facing is carried out by two main ways:

Directly to the outer surface. It is advisable to simply be smoothed to avoid deformations when laying a multiple elements. The most convenient for installation is the surface of a brick base, which has increased flatness.

The surface of the base without finishing is subject to constant contamination, as a result of which its destruction is carried out.

On auxiliary crate. The frame made of a wooden bar or metal profile will allow you to avoid curvature when installing. This option is relevant with tight-type facing.

Attention! Finishing the base surface of houses erected on silent-screw foundations is desirable to produce on metal frames that guarantee elevated strength characteristics.

Than to separate the base

By making a decision on the method of installing cladding outside the base surface of the house, you can start choosing the option of materials that meet taste and financial capabilities. The construction market offers an extended range of materials capable of satisfying the most advisory requests. How to strip the protruding part of the foundation? The most used options:

natural or artificial stone - beautiful, presentable, but expensive;
panels - are promptly mounted, do not require professional training of the wizard;
the tile is a medium-valued version, it is easy to clean, but has low thermal insulation characteristics;
profile sheet - modern, available, but requires to install an auxiliary framework;
plaster or painting - convenient, fast, inexpensive.

Home decoration, with a variety of finishing materials that perform the role of a decorative element in designer design

Important! Choosing, the better to decide the base surface of the building, give preference to the products of proven manufacturers. Deciding to save, as a result, it is possible to obtain unexpected results in the form of a peaked paint that burst the coating or tiles.

Finishing the base of stone

Extremely used for decorative design. This is explained, since the factory mineral is not only beautiful, but also has increased strength characteristics. Most often, the cladding of the base surface of the building is carried out by the following types of stone:

Natural river or sea stone. The structure of the stone allows you to completely secure the house from the penetration of moisture inside the room.
Sandstone. From it, by industrial processing, flat tiled elements or volumetric, any bizarre form are created. Lack of stone is the need for additional coating with water-repellent compositions.
Granite. The surface covered with polished granite slabs, looks solemnly and, a little, is frightened. Therefore, most often this mineral is used in the design of public and administrative buildings.
Porcelain stoneware. Facing the base with artificial material - a porcelain stoneware, compared with natural minerals, makes it possible to significantly reduce the financial costs. But it should be noted that the porcelain stoneware obtained from the mixture of gridden rocks and clays is not inferior on the strength and decorative characteristics of natural analogues.

Natural stone is a heavy material that consistently weights the power frame at home

Marble or marble crumb. Due to frost resistance and moisture-resistant, marble crumb is used when designing internal and external surfaces of buildings. The ability to create with its help unique patterns is actively used in designer design.

If you decide to take advantage of the construction of natural stone, remember that work with this material requires professional skills. Without possessing sufficient experience, you should not try to work with your own hands. You won't call the flexible material, so correcting errors allowed when installing is difficult.

results Vote

Where would you prefer to live: in a private house, or apartment?

Back

Where would you prefer to live: in a private house, or apartment?

Back

It is better to use the services of specialists who will help you get a building with a number of advantages:

durability. Natural stones on this criteria are undoubted leaders;
ecology. Natural minerals do not contain chemical elements harmful to health;
frost resistance. Subject to the technology of work, the stone laying withstands the increased number of freezing cycles without disrupting the integrity of the array;
resistant to chemical and mechanical damage;
decorativeness. With the help of stones are created original, textured surfaces;
easy care. Cleaning stones is supported using simple detergents and brushes.

Maintainability is very limited: to remove the damaged fragment (s), without breaking the cladding on a sufficiently large area, it is very difficult

Using panels for trim

New materials are constantly emerging in the construction market, allowing to significantly alleviate and speed up the construction and decoration of buildings. Artificial composites intended for facing the outer surfaces includes plastic front panels that imitate the appearance of various facing materials. Plastic panels have some benefits compared to other types of facing materials:

The installation of PVC panels is made on a wooden or metal frame, resulting in a clearance that provides ventilation of the walls.
The frame design allows without any difficult difficulties to establish additional thermopanels that increase the thermal insulation characteristics of the building.
The design of the surfaces with plastic panels reduces material costs due to a relatively small price.
Installation speed is quite high. The installation of the panels can be carried out independently, having a basic set of tools at hand.
Care does not require special chemicals, panel processing is carried out with common detergents.
Enterprises produced panels of various geometric sizes, which facilitates fit under the existing parameters.
The color solution and texture make it possible to implement the most exquisite fantasies.

Plastic panels are very popular in the finish not only the base, but also the whole house.

Attention! By installing panels, use special connecting elements to avoid the formation of gaps.

Increasingly, during the construction of the building, cladding the basement is made. This artificial composite, based on light concrete with the addition of synthetic fibra, has properties that allocate it from the general list of similar products. Main characteristics:

increased strength;
frost resistance;
a small mass of elements;
original design;
special coating that protects panels from soot and contamination.

Tile trim tile

Widespread cladding of the basement facade tile. This is explained by the available price of building material and quite good decorative and strength characteristics of tiles. The best option for facing tiles for foundation are varieties of clinker tiles. If you stopped at this option, note that the clinker tiles are formed in two ways:

manual;
machine.

Tile base is separated by either clinker (terracotta) or ceramic

Important! With machine pressing, the tile has an increased density. Therefore, when choosing to give preference to this option.

To economical, with the financial part, the options include cladding with ceramic or paving tiles. But there are shortcomings that you should not forget:

low thermal conductivity. You will need to carry out events for additional insulation to achieve comfortable temperature modes;
bad frost resistance. At low temperatures and high humidity, the ceramic tile is covered with cracks, and the pavement tiles occurs the top layer.

The perfect version of the tile is stone. Made of natural stone, it has a multitude of positive properties:

increased resistance to abrasion;
durability;
decorative;
resistant to the effects of aggressive substances;
variety of shapes, sizes, face finishes.

Finishing the basement promotion

One of the most economical finishes of the basement of the basement can be called a metal-produce cladding. Due to the wide range of colors, it allows you to organically fit into an existing complex of structures. The installation of the professionalists does not differ in labor intensity, you can cope with it yourself. Mandatory condition for installation is the arrangement of the waterproofing layer.

The decoration of the base panels is somewhat more complicated and more expensive than siding, but deprived of its flaws

When installing metal mills, one of the waterproofing types are used:

Caution. As a basis, a bitumen mastic applied to several layers is used.
Using adhesive materials. Roll coating is preheated and placed on the surface being processed.
Membrane. Produced in the form of a roll film or plates with protrusions. Easily mounted, has elevated waterproofing properties.

Finishing base plaster and other materials

It is not lagging in popularity from exquisite options trim the base with a tight or decorative plaster. Not inferior in high-quality characteristics by natural marine or river stones, the plane is much easier mounted, and the price does not cause shudder.

As soon as the box is ready, you need to think about finishing the foundation. It is important to choose the appropriate finishing option, considering the type of base and the overall design of the facade. Otherwise, the finishing of the foundation of the house itself personally or with the help of hired workers will look careless and will not be combined with a common design. So, what materials are the most popular for cladding the base?

Why do you need a base? This is the lower part of the external walls located at the foot of the house and intended to protect the underground space from the external environment. In a number of buildings, this is a separate element, varies directly above the foundation, in others - a single whole with it.

Be that as it may, the grounds must be additionally protected by finishing from moisture, dust, wind and other influences of the external environment. The bases also differ in the type of location relative to the facade plane. Here are the main types:

Wood - The easiest of use. Due to the design of the base, there is no need to additionally install plums, since it is protected from water and snow by a wall that helps over. Such grounds are easier to protect against aggressive environmental impact, as well as mechanical damage. If we consider this type from the point of view of design, then the weltering grounds look most attractive.
Protruding from under the wall base - Option for buildings with rather thin walls or if the basement provides a warm room. It requires the mandatory presence of a plum, otherwise water and snow, accumulating on the ledge, will gradually destroy the foundation of the house.
Casting chair. This design is used very rarely, since it is difficult to ensure the necessary degree of waterproofing the foundation of the structure.

From the point of view of practicality, the grounds are best to perform from such materials as a monolithic concrete, natural stone or burned brick due to their high strength. However, it is impossible to say that the concrete base looks quite beautiful, so facial trim is needed - it will give the extra attraction to the house.

Whatever finishing material for the base would be selected, the foundation in any case must be protected by a layer of waterproofing and only after that begin facing work. What materials are better to use for this?

Finishing base plaster

For clagging cladding, any decorative plaster is used, it can be textured or smooth, under marble, color, etc. In any case, pre-processing of walls is necessary - cleaning and primer. Some types of plasters require additional application of a special reinforcing paint on a mineral base.

If, inspected the base before work, you noticed quite impressive irregularities, potholes, protrusions or geometric errors, before applying plasters, be sure to mount the reinforcing grid. This is necessary for better adhesion of the plaster mortar with the base.

The grid will be needed in the event that the wall is perfectly smooth, but the layer of plaster thicker is 1.2 cm. The reinforcing material can be any - tissue, welded or wicker, the choice depends only on the layer thickness. If you plan to apply a thin layer plaster, you can use fiberglass. Reinforcement is necessary not only for clutch, but also to protect the coating from cracking during operation.

Applying the plaster, you can show your fantasy - the surface can be with patterns, extends, writing, or simply rough or smooth. The appearance affects the grain of plaster. As a finish layer, facade paints of suitable color are often used.

More complex finishing options

Finishing the base of the house can be carried out using a variety of materials. The most popular of them:

natural stone (marble, granite, sandstone, limestone);
porcelain stoneware;
ceramic tile;
sidding panels and other materials.

Choosing the type of finishes, it is worth navigating not only on the technical characteristics of the material and the complexity of the installation, but also on the aesthetic aspect - the finish should be harmonized both with the main facade and with the roof, facing of doors and windows and even with the railings of the stairs if there is such available.

Facing siding

Siding is one of the most universal finishing materials, because it can be used with ease when finishing any surfaces. Depending on the design tasks assigned to it, the panels may be imitation of natural bricks, ship timber, natural stone or slate. The installation of siding panels is so simple that there will be no difficulties with him even with newcomers - it's enough to stock the necessary tools and to clearly follow the instructions.

Congue siding as a finish has a number of advantages:

High strength, the ability to withstand high loads.
Color stability to ultraviolet - it does not pale over time.
Easy in mounting.
High waterproofing qualities - the material does not absorb and does not let water.
Lifetime for up to 50 years.
Good resistance to any mechanical damage.

Important:these qualities are characteristic of the base siding, it is not necessary to confuse it with the usual, used for the facial finishing of the walls of the house.

Despite the external similarity, the siding panels for the base are much stronger and more reliable, and the basic material includes special substances. It is at the expense of them that the panels acquire higher operational characteristics than ordinary facade siding.

The trim of the base under stone or brick looks most organically. Siding panels that imitate the real stone masonry, by strength and resistance to external factors no worse than its natural analogue.

Such siding does not require additional processing after installation. Vinyl, on the basis of which the panels are made, does not require painting, nor the smelting of the seams between the panels, nor the planned work on the submission of the facade. For decades, vinyl will not cover cracks and looks like new, and its waterproofing qualities do not become worse with time.

Siding - lightweight material, it is because of this that he is so easy to install. The panels are practically not pressed on the foundation, so there is no need for its additional strengthening. Such material is suitable for both new buildings and very old houses. Not an exception and decoration of the base with a tree, but in this case you need to take care of breathability.

If we talk about the price, the purchase of material and work will cost a little more expensive than when using polymer panels. Some, choosing between two of these similar materials, acquire a more economical option. However, in pursuit of savings, it is worth considering that siding, even more expensive, but stronger and reliable PVC.

Finishing of the base facade PVC

Even the most strong foundation requires reliable protection against aggressive exposure to the environment - precipitation, the sun, temperature drops, mold, etc. In addition, it is the base that takes on almost all mechanical damage, it is easy to hurt the tool with, for example, a lawn haircut Location on. The protection of the foundation needs to be approached more seriously than to the other parts of the house.

It is important to choose not only high-quality and durable facing material, its appearance should be combined both with the finish of the house and with the surrounding landscape. Incorrectly picking material, you can get too beautiful design.

The second most popular material after siding is the PVC panels for the exterior finish. According to the experience of many designers and builders, these panels have several undeniable advantages:

Due to the thicker layer, the basement PVC-slabs withstand impressive loads on the facade.
The appearance remains unchanged for decades.
Panels are resistant to any chemical and biological substances.
PVC is not afraid of strong frost and fire.

PVC panels are easily mounted - the element assembly is maintained according to the principle of puzzle. For reliable mounting of the plates to the wall, it is necessary to use a self-tapping screw and a prudently installed wooden or metal frame.

With the help of PVC panels, you can kill two hares at once - ensure reliable protection of the foundation of the structure and give the appearance of the house the completed and beautiful appearance. Due to the wide range of colors and abundance of a wide variety of textures (imitation under natural materials such as stone, marble plates, marine pebbles or red bricks), you can decorate the facade in any style: from a calm classic - before the modest man.

In addition, the panels are able to hide most of the lack of foundations that have arisen during its construction - irregularities, rods and others.

If you want to finish repairs as quickly as possible - the basement PVC panels is exactly the option that you have to do with the ratio of price, quality and simplicity in the installation.

Stone finish

Natural stone plates for facing at home will never come out of fashion. This is the most reliable and durable material of all for the trim of the base. Previously, due to the high cost of raw materials, stone houses were the privilege of only very rich and noble people, in our time the stone is just one of the options of the facade finish.

Due to the variety of prices, you can choose the option that it will satisfy you. It is not necessary to facade the facade of expensive marble or granite, it is quite possible to stop your choice on more easy and inexpensive sandstone.

Regardless of the value of the material, the stone facade looks luxurious and presentable, and the protective characteristics of the stone exceed any other materials - it is not afraid of damage, chemical compositions, fire, water, precipitation, ultraviolet and mold. Such a base will be launched more than one generation. However, despite the obvious advantages regarding other materials, natural stone has no less impressive flaws. The main part comes down to:

most weight and, as a result, a very difficult installation - to separate the base of the stone with their own hands is quite difficult;
strengthening the foundation, otherwise it will simply not stand the weight of the stone;
very high price.

Nevertheless, despite the biting prices and the upcoming difficulties with installation, many choose this particular finish - the advantages of natural stone outweigh its flaws on all fronts. You can not worry about the reliability and preservation of the foundation with a stone basement.

Porcelain stoneware

If a natural stone is too expensive finishing option, and you want to give the facade an impressive and rich species, you can use porcelain stoneware - an artificial view of the stone. In terms of its qualities, he is not at all inferior to his natural and more expensive analogue.

Porcelain stoneware is distinguished by a low degree of water absorption, which, on the one hand, makes it resistant to even the most severe frosts, and on the other - limits in the laying methods. Such a stone is mounted either using special adhesive mixtures, or using a frame.

Important: Cement is not used as a binder item - in the first winter, the stone can be detached from the wall.

In its appearance, the porcelain is quite diverse, its surface can be matte or glossy, satin, glazed or intentionally made up. It is very beautiful and unusually finished with imitation of texture fabric, genuine leather or so-called wild stone.

Installation of porcelain stoneware differs little from cladding technology using baseline siding panels, so that all the necessary work can be performed independently. Main steps:

Preliminary preparation of the foundation. Clean the surface of the foundation from dirt, dust and small garbage, drive the base. Calculate the necessary material in advance, but the dimensions of the porcelain bands can be adjusted directly before installation, which is especially convenient when finishing the corners.
The attachment method largely depends on climatic conditions. If you live in a fairly cold climate, it is better to use a frame that will play the role of additional thermal insulation. Such work is longer and challenging, but will not require professionals - with due diligence, you can do everything with your own hands.
Instead of a tree, it is better to use more durable and reliable metal rails. Mounting the frame grille, be sure to leave the gaps between it and the air circulation wall.
The frame is installed within 15-20 cm from the ground - it is in such a height that the ground rises, freezing in winter.
In the left, the gap must necessarily put the insulation to choose from - mineral wool, foam or penplex.
After mounting the frame, the porrite plate plates are installed, they are attached to the grid with the help of curls.

If you decide to mount porcelain tiles on glue, it will take much less time, forces and materials. A layer of glue is simply applied to the base, and the stove is stacked on it. In this case, neither frameworks or heat-insulating materials are not needed.

Ceramic (clinker) tile as decoration

This is a very popular material for facing the foundation, in its characteristics similar to a porcelain stoneware, but cheapest at cost. The clinker can reproduce the structure of the brick, be polished to the brilliance or deliberately shrouded under the stone. In terms of installation, the tile occupies intermediate positions between porcelain stoneware and siding.

What the main stages of finishing works look like:

First of all, of course, the preparation of the foundation is necessary - the basis is thoroughly cleaned, aligned and ground.
For mounting, the tile requires a special frost-resistant glue. Instruct it to the consistency specified in the instructions, and with the spatula, apply a layer on the wall not thinner than 4 mm. Make sure that the empties are not formed in the process - if water falls in them, then when it is frozen, it will go off, and the tile will move away from the wall.
Installation begins with an external angle with displacement - vertical seams in the rows do not have to match each other. For convenience, use special crosses so that the laying was smooth.
As soon as the glue dries, you can start the last step - grout. Unlike the interior decoration, when cladding the base, it is necessary to use compositions resistant to minus temperatures.

Since the soil level around the perimeter is constantly changing, it is necessary to calculate the number of tile series of tiles in advance - the final result depends on two factors:

the size of the tile itself;
widths of seams.

To make it more convenient - measure the line of the second from the soil of the row and forth the smooth horizontal line. Instead of marking, you can use auxiliary bar.

This finish looks very beautiful - the clinker perfectly imitates natural facing brick. Given the high cost of the brick itself, the use of ceramic tiles in the decoration is a reasonable option. Such a base will look elegantly and expensive. An interesting decorative effect can be achieved using a contrasting grout.

The tile is mounted not only on the base, but also partially on the walls, you can additionally separate only the corners of the house and window and doors. Natural tones of clinker are well combined with shades of ceramic tiles and most other materials.

If desired, the tile can be mounted not only on the glue, but also on the frame by analogy with a porcelainist, if you plan to arrange the ventilated facade. In latitudes with cold winters, it is recommended that the second option is recommended. It requires large financial and physical costs, but much more reliable compared to the adhesive method of laying. Between the frame and the foundation, you can pave a layer of insulation.

So, all the above presented types of cladding of the base are good - none of them are not better and no worse than the other. Choosing a material that the foundation of the house will be made, guided only by our own taste, convenience and financial capabilities.

An important element of the house is the base, which protects the lower part of the outdoor walls of the building. It must be made accordingly, it must have durability and resistance to various adverse factors. It should be a good to think about whether to separate the base so that it is stable and at the same time architecturally attractive. The outer walls are discharged most often by ceramic tiles or clinker, but sometimes decorative stone and other materials are also found.

How is it right and what to fade the base of the house?

The base is the upper part of the foundation wall, which is usually located above the ground level at an altitude of 30-50 cm. This height depends on the place of construction of the house, the level of groundwater and the design of the foundation. Higher socles can be made in the design of the foundation partially blubble in the ground, in the case of the presence of basement.

The main function of the base is the protection of the lower part of the outer walls of the building from mechanical damage (in order to avoid damage to the waterproofing layer) and the preservation of walls from high humidity. Wetting can be caused by a strong rain and melting of snow, which drops directly under the walls of the building. If you correctly build and properly bonded the base, it will protect the walls of water and will be an attractive architectural accent of the house. However, in any case, it is worth avoiding the accumulation of large snowy drifts near the building.

Social Tsocol or protruding?

In most cases, typical private houses are performed with a sealing base, which hides under the facade of the building. In this solution, water flowing from the facade will be drained from the wall, which will ensure a higher degree of wall protection against moisture.

The decision on the layout of the base must be taken already at the stages of the foundation, in order to properly comply with the basis and choose individual layers of external walls.

In the case of a weltering base, a special profile is used, which is resistant to rainwater and protects the lower part of the house from mechanical damage and moisture.

In the case of thermal insulation of external walls with mineral wool or polystyrene foam slabs, you can also use a special starter strip, located in the lower protruding part of the facade.

The protruding base is performed less often. However, sometimes it can be an interesting architectural element of the building. In the case of a base protruding from the facade of the building, its upper part must be reinforced accordingly with the selected profiles of steel or ceramic tiles.

It is important that a height difference is made by about 6-10%, which provides a smooth outflow of rainwater without its deposition on the wall (facade). In no case, in no case, the upper surface of the base should not be horizontal, without slope, as this will quickly lead to the damp walls and damage to the facade at the point of connection it with the basement.

If we want to bore the entire base of decorative stone, we must correctly choose its thickness so that you can perform the appropriate water flow.

Protection of the upper surface of the base should perform by about 2-5 cm, which will ensure the flow of rainwater from the surface, without causing the dampness of the wall.

The least rarely found grounds that are made with a wall with a wall, that is, in one with it a plane or an even facade to the earth itself. Such decisions should be designed individually and require a very accurate selection of all materials. It is important in this case, the proper implementation of all the facade cladding compounds and the choice of durable and frost-resistant materials.

Ceramic tile or clinker are a fairly common material for the base. In this case, the parameters of the frost resistance of the finishing material are very important.

Make sure that the tile has sufficient resistance to low temperatures in winter and has water absorption not more than 8% (for ceramic tiles). Materials that do not meet these requirements may be too fragile for finishing.

Ceramic and clinker tiles can be particularly useful in case of trim of the base, speaking relative to the plane of the facade of the building. Options for various thicknesses, shapes and design are available.

For the safety of the base, the right choice of glue is even more important. In this case, be sure to use the elastic and frost-resistant glue of high quality so that there is no separation of individual tiles or even whole arrays. Tiles must be glued to the plastered surface. Before gluing, it is recommended to lay a special grid, which will increase the elasticity of the entire structure.

It is also necessary that the grout used is resistant to water and frost. In the case of clinker tiles, it is necessary to use glue and grout, specially intended for clinker, which are protected from the so-called fading (white spots on the clinker surface). The market is also available adhesives and grouts available in various colors, which allows you to select the color of the tile solution.

If you want to fade the base of the house with tiles, you have a very wide range of colors and patterns, which allows you to harmoniously pick up the finish towards the facade of the building.

An important advantage of finishing from tile or clinker is that such a surface is easy to maintain clean, clean and wash without damage. The tile is also resistant to mechanical damage, although to a lesser extent than the surfaces decorated with natural stone (which are more durable than ceramics or clinker).

If you want to bind the base of the stone, it should be borne in mind that this is a very time-consuming and, therefore, a more expensive way than finishing from ceramic tile or basic plaster. This is due to the fact that the right choice of stone is necessary to maintain an approximately equal seam thick over the entire surface.

To perform this type of finishes are usually used:

large pebble, although in this case the difficulties arise in the selection of flat stones close to each other in size;
chipped stone;
stone tile.

The tile of natural stone is characterized by a very spectacular outer surface.

Stone tile and stone are characterized by good properties of the drain water and the ability to easily maintain the surface clean. The stone is also very resistant to mechanical damage, which will ensure good protection of thermal insulation and the lower part of the outer walls from moisture.

Due to the high labor intensity, the trim of the base of the natural stone is a relatively expensive solution. In addition, it is worth ensuring that this type of finishing will harmoniously look in the architecture of the rest of the house (the stone is not always suitable for houses in the modern style). In order to save it, it is often used to finish the base with panels under stone, which imitating the pattern and pattern of natural stone.

There is also the possibility of finishing the surface of the base of plaster. For this purpose, acrylic and mineral plasters are used. Despite the fact that both types of plaster masses can be used for outer walls, it is still not recommended to use acrylic plaster.

Acrylic and mineral plaster differ significantly at the price (not in favor of mineral), but when choosing should not take into account only the criterion of prices.

Acrylic plasters are produced in a much wider range of colors, and can also be painted without any serious problems in any selected color. In the case of mineral plasters available on the market, the choice of color is more limited.

A few years ago, mineral plaster sold in the form of a dry mix, which it was necessary to dissolve the necessary amount of water. In the absence of experience, it is not always possible to make the right solution. Now, however, they are available on the market in the finished masses, which allows them to be applied directly from the tank on the walls, as in the case of acrylic plaster. These are more expensive than dry mixtures, but after adding the cost of labor, it often turns out that the cost will be the same. Ready masses do not require such a long drying and protection against water, like dry plaster, which often require protection for about 3-5 days.

Mineral plaster is more durable than acrylic. However, it should be noted that no plaster will be as resistant to shocks and dents such as ceramics or stone.

The advantages of acrylic plasters are that they are more elastic and, thus, better suitable for finishing surfaces exposed to variable temperatures. Nevertheless, they are less resistant to moisture, which can accumulate in some places and destroy the surface.

Any homeowner sooner or later faces the fact that the building of the house or office is time to repair or simply refine. Choosing materials for the facade and roof, you must not forget about such an important element of the structure as the base. Its finishes must be taken separately, but naturally, it must be combined with a common appearance, style and materials. The options for the base of the base can be somewhat: the wall with the wall of the building, protruding and the watering - from its initial structure will also depend on the selection of finishing material and application technology.

Options for finishing the base

To date, construction companies performing turnkey repair companies offer several options for trimming the base:

stucco
mosaic plaster,
brick
clinker tiles,
natural stone
artificial stone
proflist

How to choose a cladding for the base and that each of the materials is, we'll see now.

Naturally, such a widespread material, like plaster, cannot but be used in the finishing of the basement of the facade. The plastered base will look beautiful and stylish, if you correctly pick up the type of material, successfully complementing the style of the building, and, of course, perform its appreciation.

This material is strong enough to ensure external protection of the construction. But, it is clear that, with a stone or siding finish, he will not be able to compete in terms of durability. However, it is worth noting that in conditions of high atmospheric humidity, the effects of ultraviolet rays and chemical corrosion, plaster, as a finishing material, showed itself sufficiently worthy. And so it concerns the breadth of the range, the plaster will probably be the first among all other finishes.

A variety of species, textures and shades suitable for the trim of the base is simply amazing. In any construction store on the shelves there are at least the most common:

structural

The textures can be used classic, and it can be brought into finishing a bit of your fantasy and get a unique, original design. As for the shades, besides the available dyes - they are also a huge selection, you can order a professional tinting in that hue that you dream about.

Recently, the popularity is gaining popularity under the stone. This is natural - the cooking trimming of a stone, natural or artificial, led to all sorts of ways to cheat and simplify finishing works.

It goes without saying that to perform the imitation of the stone by plaster - much more economically and faster than the laying of natural stone.

The most common types of plaster with a stone design is imitation of marble, granite or sandstone. Latex based plasters can provide additionally and the effect of "antiquity" is a cracked stone. In the same way, you can perform visual analogues of other materials - wood, timber, pebbles and many others.

The advantages of plaster, as a finishing material for cladding the base are obvious:

Easy to apply. Even the textured decorative plaster is completely able to apply independently without having special skills in construction work.
No need to use a special building inventory or equipment. Plasters are sold as in a dry form, where it is simply enough to add water and stir the solution and in the form of a ready-to-use mixture.
The widest range of colors, textures, application options - All kinds of plasters and designs that can be obtained with their help, it is even difficult to voice within one article.
Plaster Easily adjust or fix. Perhaps this is one of the easiest to repair materials. Moreover, it is possible to do it, again, with your own hands.
Well, and undoubtedly, the dignity is Price of this material.

In addition to advantages, plaster has completely understandable shortcomings. Among them are worth noting:

Not particularly high coating strength. Yes, this material is able to protect against external influence, however, it largely loses to other possible finishes, which is an order of magnitude more reliable.
Not durable. No matter how correctly plaster was not fulfilled, even subject to the exact compliance with the application technology, the plastered surface will also not last long as marble, it is not worth it and expect.

Stucco, despite its significant shortcomings, after all, for a long time it is used to finish the building base, it looks beautiful and harmoniously combined with other finishing materials. And given its low cost, it can be updated as wear.

By itself, the material mosaic plaster is, roughly speaking, a mixture of crumbs and resins. Modern plaster produce on acrylic resin, which has wonderful plastic and strength characteristics. This makes the mosaic plaster not only beautiful, but also durable material for finishing the base of the house.

Crumb may be different sizes. There are three types of fractions: small, medium and large. What kind of choose determines the buyer at its discretion and on the basis of the overall design of the building decoration.

Before starting the finish, the base is also prepared in a standard way: purification from dust, primer. If there is no very noticeable irregularities, then there is no need to align - it will make plaster.

Mosaic plaster is sold in ready for use. Usually it is packaged in plastic buckets of various volumes. The mixture has the desired consistency and shade. Buying material, always try to calculate its required amount as accurately as possible and provide a small supply. Pay attention to the number of the party and the production date - different parties may have a difference, which will be very noticeable on the finished base.

There is nothing difficult in applying plaster, even people who do not have the skills of finishing work can cope with this case. It is usually applied with a metallic hearometer plaster, while it is important to observe the layer thickness and apply the material in one direction - so that no marks are noticeable.

If you decide to entrust the finish to professionals, then they will most likely prefer the automated method of application - sprayer. Application is thus much faster and easier, but naturally there is not all the sprayer.

Mosaic plaster is able to serve a long time without changing its appearance. It is a beautiful, durable and comfortable trim for the base. It does not require any care, retains its kind during the entire operating time.

No extra exaggerations - the most common type of trim of the base for residential buildings.

First, the brick base is firmly, beautiful and well combined with other materials.
Secondly, it is important for home craftsmen, it is quite forces to perform with your own hands.
Well, and thirdly, brick, probably, one of the most unpretentious in the care of building materials, therefore, after having completed a high-quality finish only one day, it is safe to expect that it will last for many years.

In extreme cases, if some part of the masonry and come into disrepair, it can be replaced partially and the general appearance does not suffer from this.

The brick base is frost-resistant and at the same time, he is not afraid of scary sun rays. It is also a certain plus material and makes it affordable for any region of our country.

Also, in connection with the growing demand for environmentally friendly materials, it should be noted that the brick is just one of them - it is completely harmless to the health of people and the environment. Modern brick manufacturers boast worthy equipment and high-quality materials. On the shelves of construction hypermarkets, you can find a lot of brick species - for every taste and fantasy of the buyer.

The last priority advantage of the brick trim, it is possible to call it a low cost - compared with other materials, this, perhaps the most budget, but the appearance does not lose the rest.

The trim of the base clinker tiles is visually completely different from the brick finish. But, of course, much cheaper and easier in performance.

Before the start of finishing works, the base of the base must be carefully cleaned from dust and dirt, if this is not done, the adhesive mixture will be unevenly applied, which can lead the shower of tiles. The base on which the clinker tile will be laid must be smooth and durable - if there are cracks or damage on it, they need to be embedded in advance, the same applies to irregularities - they need to be aligned, otherwise, the tile will simply fail to lay a smooth layer. Immediately before the start of laying, the base is desirable to brand well to the special solution - the primer. This will reduce the flow of glue and improve its adhesive properties.

You need to lay the tile strictly in terms of the level, otherwise the rows can do not be even, visually it will be very noticeable and will require time-consuming alteration. Start always from the bottom row, and only by having routed it all over the perimeter of the structure, the next - and so on.

For gluing, the tiles are perfectly suitable steel semiral. It is applied by a smooth side of the glue to the base, and then, we carry out the side with the tooth with a side with the tooth - thus, it turns out the desired thickness for gluing the tile, and the relief surface will allow the tile to fix the wall on the wall.

The last stage - putting the seams between the tiles. The grout must be chosen in accordance with the use parameters, namely: resistant to moisture and temperature drops. Such a tool will cost no cheap, however, its effectiveness will pay off in the first winter.

Clinker tiles are often used to finish the base precisely due to its huge resemblance to brickwork. It can also be used both completely and partially - for finishing only the base, corners of the building, or the allocation of any elements of the structure.

Facing the base with natural stone

Of course: beautiful, expensive, naturally. It is impossible to argue with the statement that the base of natural stone look very elegant and is able to supplement, or even decorated with a general appearance of the facade.

Planning a stone finish, be sure to pay attention to its quality - the durability and strength of the base will depend on it.

In this case, several types of stone can be used:

River stone. It not only possesses a beautiful appearance, but also will show himself perfectly when interacting with atmospheric phenomena. River, like the sea natural stone, contains a large amount of mineral salts in its composition, which makes it almost invulnerable for precipitation, stagnation of snow or ice.
Limestone. Stone is pretty durable and at the same time, not particularly expensive.
Marble. Naturally, very cheap pleasure, but considering how durable and resistant to any type of exposure is both mechanical and atmospheric, material, its quality wave justifies its cost. Moreover, it is not particularly much to finish the base.

No matter what kind of stone you do not use, you can immediately allocate the advantages of such a finish:

Naturalness. Accordingly, it is completely environmentally friendly material, safe for health.
Durability. Stone finish can save its appearance over the centuries. This is especially true for marble, river or sea stone.
Unique design - Nature itself tried, painting the stones, their unique texture and coloring, of course, can decorate any construction object. After finishing the base with natural stone, you will provide the building a spectacular appearance.

The advantages of natural stone are obvious even for an amateur in construction work, however, he has the shortcomings that you also need to know, planning the decoration of the base.

The trim of the base with natural stone must be performed after a complete shrinkage of the house. Since, as already mentioned, a stone is one of the most durable materials, it is not able to undergo almost no surface tension. Hence the simple conclusion - the trim of the base with natural stones will correctly fulfill, only after a complete shrinkage of the building. Naturally, it is impossible for a new building - as shrinkage can occur for a long time - everything will depend here on the type of soil and the most buildings. Otherwise, settling, the base, decorated with natural stone, will acquire at all beautiful cracks, possibly spontaneous disappearance of the material.
The second important lack also smoothly follows from the dignity of the stone - this is his weight. It is clear that the base of natural stone is pleasure not only beautiful and durable, but also very heavy. And not every facade will be able to painlessly withstand such weight. Professional construction companies, planning the laying of a stone base, always calculate the strength characteristics of the construction and the ability to withstand such loads.
The third drawback is elementary will be the cost of this natural material., especially with regard to marble, river or sea stone - these varieties, unfortunately, expensive, and not every homeowner on the pocket.

Natural stone is not only a durable and durable finish, it is beautiful, elegant and expensive - both in the direct, financial sense and in the portable - visual. Of course, it does not make sense to combine such a material with frankly cheap decoration of the walls - the stone is quite demanding in terms of the overall concept of finishing.

Finishing base house with artificial stone

Naturally, given the high cost of natural stone, the construction market found a way out for more economical buyers. In this case, this is an artificial stone. It is almost completely identical to the natural stone - it can repeat the texture of the stone, even taking into account his variety - river, marble, marble, and so on.

Due to the far-step in the construction industry, progress, artificial stone, made of concrete, with the help of special dyes, acquires a color similar to natural stone.

Artificial stone is sold in various sizes - you can choose large or small stones, depending on the designer project of the building and your taste. You can choose the stones of the right form or formless. In any case, choosing an artificial stone, you need to pay attention to its quality - the material must be taken carefully and be the most similar to the natural analog.

The artificial stone is placed on the usual or special adhesive solution, first clearing the base from contaminants. The seams are filled with a solution and are expanded by type of brick masonry.

The main advantage of artificial stone - it is many times lower cost than natural. Externally, it looks spectacular, given the large range of colors, textures and forms, but the price is at least three times lower.

However, this material has a significant disadvantage - its small, compared with natural stone, durability. In order to somehow increase the resource of the finish with artificial stone and extend its commodity view, after it laying and complete consolidation, the finished base is treated with special strengthening solutions - this event allows you to extend the life of the finish for four to five years.

Currently, perhaps one of the most common finishes - both the walls of the house and its basement. Such popularity is provided by the availability of the material, its widest assortment - in construction hypermarkets, the siding panels are presented in a huge amount, their color and texture are able to satisfy the most demanding buyers.

Siding has long been widely used in European countries for decoration of buildings, in recent years it has fallen and our market. The demand for this material in the coming decades is due to its explicit advantages over others:

Siding is the easiest to repair the material. That is, if suddenly the need to replace some part of the site decorated with siding, then do it is not problematic - the main thing is to have the same material - from the same party as replaceable. The most faithful solution here is just to buy it a little more to then have something to replace.
The material has a very light weight. Planning its installation, you do not need to calculate the load on the foundation, since it is completely insignificant. Siding can be finished without thinking about the strength of the walls of the construction as a whole.
For siding installation, simple design is needed. - It is easy to perform, and the most interesting thing is that using such a frame, you can put insulation inside, significantly reducing the heat loss of the building. The device of such a design allows the use of various types of insulation - from elementary to the most modern, and, in such a way that it will be visually not noticeable in the finished form.
Siding has excellent performance properties.: It is calmly withstands any atmospheric phenomena - precipitation, wind, frost and high temperature without changing their properties or appearance. Some sellers of construction hypermarkets dissuade buyers from siding, motivating that while under direct sunlight, colored views of this material can burn out. In fact, it is not. Almost low-quality material can burn out into the sun or, not intended for use in such conditions.
A variety of textures and shades of siding. Of course, it is impossible not to note the variety of textures and shades of siding, presented on the shelves of modern shops. Manufacturers produce siding, imitating stone, board, any natural materials, the shade can be the most diverse. This is exactly the type of material that you can easily choose to absolutely any style of the facade.
Simple care. Elementally simple care for the finished finish is also an important advantage. No special means and events needed - siding is easily cleaned from dust and mud ordinary water.
Ease of installation. Finally, for masters for all hands, the most important advantage of this material will be ease of installation. Siding is quite easy to put on its own, having only superficial knowledge about building or finishing work.

With all its indisputable advantages, siding, like any other material, cannot but have flaws. They are:

Weak durability for mechanical damage. Unfortunately, the material is so comfortable in all senses, you can easily damage even not particularly hitting it. This is especially true in case of finishing the base - as it is just in the zone of the most frequent mechanical damage.
When installing siding panels, it is necessary to take into account that the seams between them are maintained by a special composition. - It will make them not noticeable.
By itself, siding - the material is thin and cold. That is, if you do not plan to use under it - think well, whether you will receive a warm building enough after repair.

Despite the shortcomings, siding to date continues to remain popular finishing material. It is used in a wide variety of cases, including for finishing the base - this option is well combined, as well as with a siding siding, the entire facade and other species.

Comfortable and practical material for finishing many construction objects, including base house. As is known, the base must be as reliably protected from the effects of moisture, atmospheric precipitation, sunlight and similar natural impacts. - Metal figure sheet, thick from 0.5 to 0.9 mm - is excellent for installation of such protection.

The professionalist can be offered for sale in various versions in width, the height is usually two meters. To finish the base, as a rule, an ordinary, wall straightening is used, it is marked with PS-8, PS-10, C-8 and C-10. It is also necessary to pay attention to color options, this material is presented for about fifty shades.

But it should be borne in mind that different manufacturers paint their products in different ways, therefore, it is necessary to buy this material at a time, from one party - otherwise, there may be problems with the spread of the finished finish.

The corrugated appearance of the professional leaf can be played as a designer move, placing a sheet as vertically and horizontally and even diagonally to the main facade of the building.

Since the professionalist is attached to a specially arranged frame from a P-shaped profile, then it usually uses any to increase the thermal insulation characteristics of the construction.

Among the explicit advantages of the professional leaf should be noted as follows:

Good strength characteristics. Metal sheet is securely and worthy, you can not be afraid of atmospheric phenomena.
Pretty interesting appearance - The main thing is to successfully choose the remaining finishing materials, harmoniously combining a professional owl with the appearance of the whole building as a whole.
Resistant to corrosion - Do not rust, as the professional owl is sold painted or galvanized.
Fairly available cost.

The disadvantages of the professional leaf are:

Low heat resistance. The professionalist is cold chilled and without a special insulation system, it is not advisable to use it.
It is not suitable for any style of the building. Professional property - can be said, minimalistic design that needs to be carefully combined with other materials.

Professional property is a modern and original way of finishing the base, its varieties are not so much, but still, from the produced color range you can choose exactly what is needed. As for durability and strength, here it is its properties at the height.

The trim for the base should be primarily strong, so it is worth choosing such a material that will be reliable and durable, and it is necessary to take into account the current climatic condition of operation. Secondly, the base finish is very much solves in the overall appearance of the building, not correctly selected color or texture, can visually destroy the rest of the facade.

Therefore, it is important to take into account the compatibility of the material to finish the base, with a shared house. Here are important and shades and relief - they must harmonize or be contrasting. Small but significant factor is also a building style. If this is a classic, then there is no need to finish the base of the colored straightener, and if we are talking about asceticism, then natural granite will be inappropriate. These are, of course, more subtle nuances, but they are also desirable to pay attention, manifesting the feeling of taste and measures properly.

Currently, the construction market is as diverse, what to choose from what. A variety of materials are available, and in its appearance, and according to the characteristics, and in cost. The choice is yours!

By facing the facades of the country house, it is worth thinking about the above-ground part of the foundation that originally looks like a simple concrete wall. It is just as ugly looks a lumen under the building erected on new-water screw piles. Hence the task of our article - to consider what materials the trim of the base of the private house is performed and what it is better to decide in certain conditions.

The role of the ground facing of a private house

We have already mentioned the improvement of external design using the outer finishing layer. But in addition to decorative, it performs other important functions:

extension of the service life of a concrete base by protection against moisture, direct sunlight and sharp temperature drops;
the covering assumes pollution and a variety of mechanical damage;
fencing reinforced concrete from damage to microorganisms - fungi and mold;
in the case of a pile foundation closes the clearance between the house and the earth, so that the wind does not walk on it.

Before separating the base outside, it must be insulated, these are the requirements of the construction norms. Thermal insulation is performed by polymeric water-repellent materials - foam, extruded polystyrene foam or by spraying foam polyurethane. After that, the layer of insulation is decorated outside the facing material.

Note. There are special thermopanels for finishing the base, having a heat-insulating layer, which will be said further.

The whole foundation is subject to insulation - both overhead and underground part to the depth of the primer of the soil.
If the construction of the house is completed, then it is necessary to make the heat insulation of the base with the scene, it is a cheaper option.
It makes no sense to insulate alone, as the cold penetrates the building through the ground.
External isolation can not be performed if the floors are warm throughout the cottage, although additional protection will be worth it.

Materials for finishing

There are quite a few options than can be separated by the private house:

smooth or embossed plaster;
natural or artificial stone, tile;
clinker and other decorative brick;
plastic or metal siding;
a variety of panels with thermal insulation layer without it.

Now consider each option in more detail.

Application of plaster

This is one of the inexpensive ways to finish the foundation, used in homes without special requirements for external design. In addition to low cost, plastering gives such advantages:

A multiple layer is characterized by good vapor permeability, and therefore is successfully applied both on a concrete surface and on the polymer insulation.
The simplicity of plastering work allows you to save more funds if you do everything with your own hands.
This cladding can be quickly and cheap to decorate in any color and give different textures - from small "fur coats" to imitation of wild stone, as shown in the photo.
Modern plaster without problems is cored in the desired color, which eliminates the painting work 1 time in 3-5 years.

Reference. Plastering technology is pretty simple. For example, the "fur coat" from the liquid solution is attracted by a thin layer on the moistened base, and the cored is superimposed and is resurrected by the rule. Imitation of natural stone is made by a manually mixture of thick consistency.

The negative side of plastering coatings is a limited life. From the effects of weather conditions and the difference in temperatures, it gradually sat down, goes with cracks and even chips. High-quality plastering will serve for about 5 years without problems, and after it needs periodic repairs. The moment is second: this method for obvious reasons is not applicable to buildings on pile foundations.

Stone cladding - pluses and cons

Such varieties of natural stone are used to enjoy the base part of the house:

seven;
limestone;
sandstone;
gray and black granite, marble;
labradorite.

So looks like a granite facing

Plannyak with polished or crusted edges, sliced \u200b\u200bfrom rocks, is able to serve during the entire life of the building. Such finishes for many years does not lose excellent appearance, and also does not require care and repair. This is the positive sides, but there are negative:

High cost of treated natural stone.
It will not be possible to bind the basement with your own hands, you will have to attract specialists, and these are additional costs.
Due to decent weight, the material marks the foundation noticeably.

Imitation of sandstone

Give a cottage an elite appearance can also be for a lower price, if we separate the ground walls with artificial stone with fiber cement tiles or porcelain stoneware. They are produced on the basis of cement mixtures with various additives by casting in silicone forms and successfully imitate any rock formations. Artificial stone for durability is not inferior to natural, and weighs less. But for laying tiles per solution still requires experience and qualifications plus labor costs for surface alignment. All nuances are told in the video:

Reference. Some manufacturers (for example, brand "Canyon") offer products with metal brackets, fixed on self-drawing to a wooden frame or straight to the wall. So, if you wish, you can mount the base of the base yourself.

About brick masonry

The advantages of traditional facing with brick are well known to the homeowners who used this way. For durability and respectable appearance, masonry is practically not inferior to stone walls, but has the following features:

To put the base of full-size brick, you need to arrange a reliable base for it. This will not be a problem if such a finish was provided for in advance and the width of the foundation tape allows you to build a wall in the Polkirpich on it. Another option is a device of a full-fledged unit associated with the base of the house by reinforcement.
Brick cladding of the base makes it possible to organize an air layer or lay insulation into the wall.
If you do not apply cheap silicate varieties, then the masonry will serve as good insulation.
For the construction of a facing wall from decorative brands, laid out "in a wastelife", you will have to attract the masters - a bricklayer or to train yourself for a long time.

Note. To reduce the trim of the basement, instead of bricks you can apply clinker tiles. The technology of laying on the adhesive mixture is similar to a ceramic trim.

At the price of construction, this method wins the stone cladding, but it will cost more than the installation of artificial tiles. In addition, the protruding face wall will take a wide casting around the perimeter of the building.

Suding trim

Metallic and plastic basement siding can please each homeowner for both price and a variety of colors and textures. They are offered in the form of strips and panels of various shapes mounted on wood frame or steel profiles. In addition to affordable prices, the material has such advantages:

The speed and simplicity of installation, thanks to which the owner is able to shelter the base of siding.
Remarkable appearance of a private house.
Since the facing is mounted on the subsystem, the insulation of the desired thickness is calmly laid.
In the case of mechanical damage, spoiled elements are easy to replace.

Reference. Sometimes budget material is used as a siding - a wall straightener. It is equally well suited for decorating small country houses, arrangement of fences and light gates.

Cheap types of facing are not perfect. But the siding is not so many of the shortcomings:

vinyl sheathing is susceptible to burning, and the highest quality - melting from heating;
the polymer painting of metal panels and professional flooring quite quickly burns into the sun;
after 5-10 years (depending on the quality of the products) the appearance of the material is worsen;
siding must be periodically soaked from dust and dirt;
random mechanical damage leaves scratches on a painted metal, and plastic can break from the shock load.

Despite the mentioned cons, wall and base siding does not lose popularity. In addition, it is well suited to sew the cavity of the pilewood foundations. How to perform installation, read on, and with the process of the trim, you will get acquainted with the following video:

Advantages of finishing panels

Since the characteristics and method of installing plastic panels differ little from vinyl siding, we propose to pay attention to other types of products:

two-layer thermopanels, where the polystyrene insulation is glued to the base of artificial stone;
fibro-cement products by the type of Japanese lining from the Kmew brand.

The presented finishing materials for the base combine the positive sides of the stone and PVC panels plus have an acceptable cost. This is a long service life, a wonderful appearance and simplified on or without a frame.

Thermopanels, imitating stone and brickwork, are equipped with a thermal insulating layer of foam or extrusion polystyrene foam. Fasteners are carried out through special counted holes, and almost seamless docking is provided by a perfect lock system. In the same way, fibro-cement panels that do not have insulation are installed. Learn more about the installation is described in the video:

Note. Both veneer varieties can be applied in houses installed on the pile foundation.

From the above, you can make such conclusions:

In most cases, the choice of material depends on the magnitude of the budget allocated for construction. The exception is pile foundations where it is impossible to use the entire range of facing products.
Even in the presence of funds, it is impractical to separate the ground ground marble, granite and other varieties of the not cheap fumes. There are substitutes - panels and clinker tiles, not inferior in appearance and deadlines, which cost cheaper and do not load the foundation.
The use of decorative brick is justified when the width of the foundation tape is calculated under the masonry. In other cases, it is easier and cheaper to strip the base wall by any imitation of bricks.

Related records: