If we need to blow up and do not get injuries at the same time, it is necessary to provide harmless detonation of pyrotechnic charge. The most primitive method is to make it - make a wick, the one that we will be able to wait for harmless distance. Here you have several methods to cook wick.

Instruction

1. Bikford cord. We take ordinary isolation from the wire or several bonded joint straws for drinks. Fill them with crushed heads from household matches, powder or other combustible mixture. This method is comfortable because our wick will not be able to blew the wind. Even if the shower goes, he will not be able to soak such a wick. In order to "filling" Bikfordov, the cord did not go too rapidly, her was allowed to ravage. If the gunpowder and nothing other than the matches we did not have, was allowed to get rid of ourselves from the need to scrape from the matches of the head. We primitively lay them out, lay out in a row and wind by scotch.

2. Jute Fitil. We take a jute rope, soak it in a solution of sodium or potassium nitrate and carefully dry. Fitil is ready for use.

3. Stop. In order to make such a wick, we will also need a jute rope, but the dilapidated cotton is also allowed to apply. I am soaked not too thick rope in a solution of nitrates, dried it. But that's not all. Now we mix the organic glue with a powder flesh. There should be homogeneous thick mass. Through this mass we need to stretch the rope. When everything is freezing, the wick is allowed to apply.

4. Hunting matches themselves are wonderful phytyl. They do not die and burn for approximately 20 seconds. But so that our charge does not restore the time, it is necessary to follow the sparks flying away from matches.

5. Poplar fluff. Extraordinary summer version of the wick, from the fact that Puch Popol is allowed in June. But from the fluff wick is lighter than everyone and having nothing needless. Primitively collect the fluff, let's take it and finish it internally with a rolled tube of newspaper or paper.

You will need

• - Zippo lighter;
• - the newest wick;
• - sharp scissors;
• - screwdriver;
• - tweezers or tweezers.

Instruction

1. It comes out, even about the famous lighter, which will burn invariably and everywhere, is also needed to take care. In particular, she is needed to change the wick. Yes, in his advertisement, Zippo says that the phytyl will serve constantly, however, when applying not the most pure gasoline of impurities contained in it, can help the burning of the wick. When Ignoring, the wick can be spoken, and maybe it's generally not immediately, it means that it's time to change it.

2. Try to pull the wick up the wick up (final, in a non-rigid lighter). When the wick stretches a little bit up, cut down the top of the top - the one that protrudes over the edges of the windscreens.

3. If such a procedure does not help either you decide to replace the wick from Zippo completely, first of all stretch the lighter-insert. To do this, take over the windshield with one hand - the upper protruding part of the lighter, and the 2nd - for the lower part of the case. Now look at the bottom of the insert. Have you seen a screw cap? It is he who holds the wick. Dressively unscrew the screw.

4. Now allowed to remove the felt gasket from the insert. After that, with the help of tweezers, get a cotton filler from the housing and the Old Fitil himself. Take the newest wick and thread it through the insert, gently insert it from the bottom into the hole, picker with the tweezers on top and pull up.

5. By inserting back the cat filler into the housing of the lighter, lay the long part of the wick between its layers. The upper part of the wick is cautiously cut down with the edge of the windproof.

6. Replace the felt valve and secure the design with a screw. The screw must be twisted fairly in order to lighterly inserted into the housing. Before inserting a lighter into the housing, check, so that the silica was voluntarily. If there is a need for this, insert the latest flint. Collect a lighter and check whether it opens and closes.

Tip 3: how to make a panel from a poplar fluff with the image of a kitten

The poplar fluff is a one-year attack of cities, where poplar are planted in the mass number. During his "departure" from him there is no salvation! If you show a fantasy, allowed to apply a poplar fluff with benefit and pleasure - say, for the manufacture of authentic panels. Soft and shaggy white fluff is a beautiful natural material for creativity!

You will need

• - dense dark paper - the base of the panel; Ideally - black velvet paper either cardboard, but allowed to also apply a dark blue, dark chestnut or a dark green basis;
• - photo or picture with the image of a kitten;
• - blank paper and copy paper sheet;
• - chalk or white pencil;
• - scissors;
• - glue stick;
• - small cosmetic tweezers;
• - pure and dry poplar fluff cleaned from seeds;
• - Frame with glass (optional).

Instruction

1. On the blank sheet of paper, put a copy and photo or a picture. Translate the silhouettes of the image of the kitten on the blank sheet of paper, not forgetting about the eyes, nose, mouth. Cut the resulting silhouette; Little scissors diligently cut eyes. It turned out a sample for panel.

2. To impose a sample on the dark basis, with the support of the chalk or a white pencil to circle the silhouettes of the sample, strictly draw the silhouettes of the eyes.

3. First make the kitten's eyes. To perform silhouettes, flagella feld flags are used. In order to do them, it is necessary to take a small chick of the fluff, stretch it and roll it between your fingers to the state of the rope. Apply a small number of glue to the eye area and diligently impose a popolic flagellum in silhouette. For the manufacture of pupils roll small balls and fasten them with glue inside eye silhouettes.

4. The torso and the head of the kitten are performed as follows: silhouettes in the necessary places are powered by glue, and after that, flagella burning flashes. Inside the silhouettes, the surface of the base is also lubricated with glue, and after that, the fluff is laid out with a pincelet. The more like the fluff, the whiter and Mokhnatee will get a kitten. Forefoil - two loose bowls rolled out of the fluff. The nose is permitted to "draw", spreading on the side the inverse side of the tweezers either with the tips of the scissors. Mustache and claws on my paws - from flavors.

5. Last but I am allowed to make a landscape: grass, clouds, etc. In order to secure the image, as well as so that Panel did not dust, it is recommended to insert it into a decorative frame with glass.

Video on the topic

Note!
Similarly, the image is not only a kitten, but also a nice animal: dogs, bunny, a polar bear and other beasts of white color, and not only animals - what will tell fantasy!

At the current time, the famous was the production of candles at home. The desired thing for this is a wick. It is allowed to extract from ready-made candles purchased in the store, but it is not consistently classified. Consequently allowed the wick to make with their own hands.

You will need

• Thick cotton thread (the twelka is also suitable, harness either Moulin) about 30 cm long
• Salt - 2 tablespoons
• Bura - 4 tbsp. l.
• 1.5 glasses of water
• Tableware for soaking
• Cookware for the casting wax
• Paper clamp

Instruction

1. In a cup or other dishes pour a half cup of warm water, dissolve 2 tbsp. Salt spoons and 4 tbsp. l. Boers. Thread or harness soak in this solution for 15 minutes.

2. Later soaking the thread hang on the drill for drying linen, in a dry room. In order, the thread dryly dried, let it turn away for five days.

3. In the intentionally cooked dishes melt wax. Secure the paper clip thread. Dry it in the molten wax 3-4 times. It is necessary, in order for the upcoming wick all the wax covered. Later, again hang it to dry it on the lurps. After a few minutes, the wick, made with your own hands, will be ready.

4. For the manufacture of candles, cut the need for a long-time length, not forgetting about the reserve. Bearing ready-made wick is allowed in a cooler.

5. To create colored fire in a mixture for soaking the phytyla, add one teaspoon of chemicals. Let's say Chloride Strontica will give the Red Flame, the dining room salt is clear-yellow, the bora is yellow-green, potassium nitrate is purple.

Video on the topic

Note!
When creating wick with a color flame, it is impossible to use several chemicals at a time, because This can cause a chemical reaction.

If you have oranges at home or lemons and uncomfortable candles, then make genuine candles to decorate your home and a solemn table. Their production will take a little time at all, and the result will certainly please.

You will need

• - oranges or lemons;
• - Candles or paraffin;
• - Kapron thread.

Instruction

1. Cut the orange into two identical halves and tidy the entire flesh with a spoon. It will not be much better for you, it's necessary to squeeze the juice from it from it or easily eat. It is permissive to apply not only this fruit, but also lemon, mandarin or grapefruit. As a result, it turns out a half, similar to the saucer. Now take the paraffin or candles, put them in a saucepan and melt on the juism with a small fire or in a water bath.

2. From a slice of the Kapron thread, make a wick, its length should be a little more than the height of your candle. It is allowed to take more closely ready-made phytilis from candles that melt if they are suitable in height. Further with one hand hold the wick in the middle of the "saucer", and otherwise pour into it melted paraffin. It is necessary that the small slice of the wick remained on the surface. Wait until the paraffin freezes, it usually takes a few minutes.

3. Such a candle looks deliciously on the table and has a magnificent smell. At will, on the edges, the peel is allowed to post a few stars of carnations or cinnamon slices. It remains only to set fire to the candle and arrange a romantic dinner. Do not forget about the safety of safety when applying the candle, be careful with fire.

Video on the topic

As peculiar, the candles are allowed to do at home. Basically, they are all manufactured from paraffin. Now I offer you a water candle. Make it significantly rapidly and is much easier. Go!

You will need

• - water;
• - sunflower oil;
• - Stack;
• - Candle;
• - plastic bottle;
• - Stationery knife.

Instruction

1. First you need to cut a circle from a plastic bottle equal to the stack diameter. After that, take the stationery knife and make a small hole in the middle of this circle.

2. Further step is to pull out the wick from the candle. It is also allowed to do with the support of the stationery knife. After that, take a jifted plastic circle and push the wick to it. To do this, it is allowed to apply a primitive rod from the handle.

3. Now we pour water into a stack. After that, there are vegetable oil. Its layer should not exceed 5 millimeters.

4. After that, we take a circle with a wickover in it and wipe it well, so there were no traces. Then put it in a stack with water and vegetable oil. Your candle is ready! Possed to try to set fire to it. Lit? I think how! Luck!

Helpful advice
Candle stops burning when the oil is over. If this happened, diligently pour it into a water candle, stretching a plastic circle with a phytylene in advance.

Do you want to create romance in nature? But at hand there is nothing. From the wind bowl and candles are allowed to create a unique designer accessory, the one that will delight you and your companions in the chilling evening.

You will need

• - Old hiking mug;
• - candlestick;
• - blue acrylic paint;
• - matches (toothpick);
• - white acrylic paint;
• - Transparent varnish for consolidation.

Instruction

1. Take the mug, rinse, clean. Skruplely dry. Cover blue paint. Leave to dry for 2-3 days.

2. With the help of matches or toothpicks, apply small white or yellow dots - it will be stars. Skruplely dry.

3. Cover your product with a transparent varnish. Insert the candle inward. Ready! Enjoy a charming romantic mood while the wick candle is smoldering.

Gel candles attach uniqueness and mystery to any interior. They will make a romantic atmosphere and will serve a mustache. Make gel candles with your own hands. In the presence of fantasy, they will not be almost straightforwards that are sold in stores. In addition, the production of candles is an interesting process to which the children are permitted.

You will need

• Glass cup, small vase or flask
• Decor: shells, pebbles, beads, etc.
• 1 tbsp. Spoon gelatin
• 1 tbsp. l. Glycerin
• 1 glass of water
• Circle or bowl
• Steam bath saucepan
• Pencil, handle or wand
• Essential oil
• Food coloring
• Fitil (allowed to make independently buying ready or extract from ordinary candle)

Instruction

1. Glycerin and gelatin to mix in a circle or other dishes, pour the glass of cold water and leave for 1 hour. During this time, the gelatin will swell.

2. In a glass, the one that will be a late candle, put the decor elements, say the seashells. When you fill with a liquid, they can pop up, it is necessary to glue them to superclauses or pour the gel mixture into them and squeeze the air. Fitil to omit into the glass and consolidate it on a pencil or a stick, so that he kept smoothly.

3. Preheat the mixture on the steam bath, so that the gelatin grave is completely dissolved. It is necessary to follow, so that the solution did not boil.

4. After that, add a few drops of essential oil and dye to the gel mixture. These ingredients are not indispensable, they are allowed and not to apply.

5. It is carefully pouring a mixture into a glass with a decor, waiting, so that the wick remained in a vertical location. Later, it is necessary to leave a candle for a while, give her to frozen.

6. Check and make sure that the mixture froze. Gel candle with your own hands ready!

Video on the topic

Note!
The number of essential oil must match the size of the candle. A small glass is permitted to add about 5 drops.

Helpful advice
To lift the process of frozen the candle, put it in the refrigerator.

Candles of more than 2 thousand years. The first references to the adaptation are dated to the 1st millennium to our era. In ancient China and Japan, the wax removed the sum in the seeds. This shrub, giving fruits on the 5th year of life. Younger plants for creating wax were not suitable, because they did not give seed yet.

By the beginning of our era invented candles based on animal fat. Makali's wick, stuck his layer behind the layer. The wick itself was made from pacles, cotton, Timofeevka stems or dairy. You can make a candle on your own now. How? About this next.

Candle Fitness Making

To make a candle at home, It should be started with wick. For him, a natural cotton thread is bought. Her bright example is "Moulin." This stitch material is in any sewing store. On a candle with a diameter of 2-7 centimeters, about 15 single yarns are required. For a product with a diameter of 10 centimeters, 24 threads are taken, and for a souvenir width of more than 10 centimeters, 30 threads are spilled.

But, the diameter of the candle is not always a pointer to the thickness of the wick. There are models that go only partially. Such products only partially consist of combustible materials. The core rubles, leaving the untouched outline. Calculation of the power of the phytile is made taking into account precisely paraffin, helium, or wax. The wax does not require a dense twist of the fotial threads, but for paraffin and helium samples, a tight twist is required.

Fitoli knit crochet, braid the pigtail, just twist. All options are appropriate. In order not to spend an extra time, even finished details from the economic candles are used. To make a candle with your own hands, It is possible to impregnate the threads in advance, and you can and at the same time with the fill.

Definition of Candle Form and Fitila Installation

On the issue of the form, the fantasy of the author plays a decisive role. It is suitable for any containers of plastic, metal, ceramics. Paraffin poured into dining rooms, chairs, metal tubes, boxes, cups from yogurt. If there is a paper label, it is removed. In the process of cellulose can light up.

The most convenient work with plastic containers. They are advised by beginners. In the bottom of the plastic container it is easy to make a hole. Fitil is inserted into it. From the outside of a glass of threads tie up a node. It will switch to no leak stearin, or paraffin through the hole. The hole is made by a thick needle.

To the top of the glass laid toothpick, wire, any crossbar. It is tied to the second end of the wick. Thus, its position is fixed. Threads should stand straight, in the middle of the container. Otherwise, the candle will burn and melted unevenly.

Candle coloring

How to make a candlecolor? A simple and affordable way - wax crayons for children. They are easily mixed with the material of the lamp, unlike gouache and watercolor. These dyes are created on a water-soluble basis.

Uniformly distribute them in paraffin is impossible. Required elements are required exclusively on a fat-soluble basis. Interestingly, the lipstick belongs to those. Therefore, some craftsmen use old, unnecessary lip patterns in the production of candles.

Among children's chalks for candles are perfect soft samples. In specialized stores, shopping salons for creativity and tableted dyes are sold. Granules are designed specifically for those who reflect how to make candles with your own hands. Tablets have a much larger range of colors and shades than in wax chalk. True, store supplements are more expensive.

Pour candles

Usually, tin cans use cans for the melt wax. They are well rinsed and flat down slightly. A chute is formed from which the paraffin is a thin flowing stalk after into the shape for fill. Capacity from canned food is convenient but, in principle, any dishes are suitable, except glass.

In addition to the tanks for swimming paraffin chips, a saucepan will be required. Water poured into it, brought to a boil. Paraffin can be put into the rapid solution. The debris of unnecessary candles must be approximately the same in quality.

Melted material is poured into a predetermined shape with a fityl installed. First, the bottom is filled. If you pour everything at once, through the hole in the bottom there is a lot of wax. When filling with layers, the "escaped" material is collected, and again they are sent to the smelting. This is the answer to the question, how to make a candle at home With minimal cost.

After pouring the candle cools, hardens at room temperature. The room in the refrigerator is fraught with unevenly frozen material.

If the candle came out a little rough, it is placed under hot water for a few seconds. So the contour is aligned, melted. But, sometimes roughness is the author's idea. Solid how to make a candleMany clefts intentionally choose forms with a ribbed surface.

It is convenient for all the fill "To the top legs". That is, the candle head, as a result, becomes wick, tied at the bottom of the tank. The top of the fill becomes the base of the product. In this case, it does not have to fill out the deepening next to the phylet at the top of the bowl. It is almost always formed in the sedimentation process, freezing wax.

In addition to standard, fuel and aromatic candles. In this case, fragrant mixtures, ethers add to the melted material. They are thoroughly stirred with paraffin before forming the product. As an aroma, conventional grains of coffee, carnation, or cinnamon with homemade kitchen are suitable. In the paraffin, dried slices of lemons, oranges, limes are also placed.

»From the presented material you will learn how you can do" chemp wick "

It is used in mostly tourists, fishermen and hunters for breeding a fire, or as a candle of long burning, as well as can be used directly as a wick, in order to set fire to the "smoke checker or a fire"

The indisputable advantage of this cord is that it is absolutely not afraid of moisture and water, due to good impregnation of bee wax.

So let's consider step-by-step instructions for creating a wonderful wick, as well as we will understand what it will be necessary for this.

Materials
1. Hemp thin rope
2. Bee Wax
3. Coil (wand, plate for winding rope)
4. Sheet of paper

Instruments
1. Glass Capacity
2. Table spoon
3. Knife
4. Heating element
5. Pan with water

The process of manufacturing a chemping wick with their own hands.
So, it has already been agreed above that this wick is possible to use both a means for breeding a fire and for the conduct of sabotage work on the manufacture of all sorts of flue checkers and Petard (directly for them smelled)

For its resistance to moisture, this cord is respected from experienced tourists and other lovers to wander through the forests and fields within a few days.

Because the bad weather can be drained in the cruel, as they say "at the most inopportune moment" to get into the rain in the rain you will have to dry clothes in order not to get sick. And where to take dry and reliable crossbar for the fire in the cheese forest? Here I will help your wick) You can of course use the "Berest" but birchings may not be nearby.

Cannal thread is taken and unwound.

Next, the bee wax should be melt, the first way is naturally a water sauna. It is done as follows: Capacity is taken with water (pan, metallic bucket) is placed on the source of fire and is brought to a boil, as soon as the water boiled down the jar in the pan with the wax laid in it.

If a glass container is, it will be advisable to put it at the beginning of the water heating process, because the glass does not like sharp temperature differences. Zhdems while wax melt.

Method 2.
Also, the wax can be melt in a microwave furnace, similarly should be placed in the glass container. Attention!In no case, do not use the metal dishes (if you do not want to blow up your kitchen) there is a bank with wax into the oven for 2 minutes, then the condition is checked if it does not melming another 1 minute. So as not to burn in the process of checks, you need to use (tack, towel, rag) are not enough for a hot jar with bare hands !!!

Now the most important thing! There is no longer melting (wax or paraffin) on an open fire, because in liquid state it is easily flammable and can lead to a fire. Be careful!

Further, as we see, the author melt wax and the next action he lowers a hemp in the canon thread, so that she was soaked as he was soaked. For a long time, it is impossible to leave a thread, because the wax will gradually cool and harden. In order to dip and then remove the rope, the author uses a tablespoon.

So, the thread is pretty well soaked by the contents and can be extracted. Next it is placed on a sheet (paper or newspaper) for subsequent drying.

Then you have to wait until the wax dry and hardens. It is undesirable to dry out the sun, it is quite suitable for room temperature and simple lighting. After the wick is dry, you can start to brush it on the Babin prepared by you, you can use (wand, skip, an oblong lighter)

The winding is produced in private, first one way, then to another.

Do you think how to make a lamp with your own hands? This article presents advice on the manufacture of a self-made lamp and wick for it. Read right now!

How to make a lamp with your own hands?

How to make a lamp

Lampada is a Christian symbol of divine light that warming people's souls. Usually it is suspended in front of the iconostasis of the house or in the church. But such a lamp made by your own hands can also be used in domestic or decorative purposes. It can come in handy if it suddenly turns off the electricity. And it can become a central element of the design of a summer gazebo on a plot of country house.

As a vessel, which will serve as an oil reservoir, you can use a small beautiful tin jar from under cookies or candies. If there is no one at hand, go to the dishwasher shop. As a rule, there are highly assortments of tin cans and jars of various sizes and the most delightful colors.

Lampada can serve not only by the attribute of religious rituals, but also a magnificent decoration of the interior.

The next step after the choice of banks will be the manufacturer of the Holder for Fitila:

• take not a very hard wire sufficient length and the rod of the usual ballpoint handle;
• put the rod for the middle of the wire (as a cross);
• wash the wire on the rod on the spiral so that the turns are tightly adjacent to each other, and the total length of turns on the rod was about 1 cm;
• remove the rod and put a wick holder on the jar: lying strictly in the center of the hole of the can, it must face it slightly (0.5 cm on each side);
• on the side surfaces of the banks, where the holder will be attached, take small holes;
• count holder into punctured holes and start the protruding ends of the wire.

All, the basis of the lamp is ready.

How to make wick for lamp

Homemade phytyl can be made from an ordinary medical bandage. Take a narrow bandage, renovate the desired length. We will cut this piece along half. We will cover the resulting ribbons on one side with a small nodule. Then tightly tweet the bandage strip and tie at the end. Gently, with a thin wire we sell wick into the holder helix (bottom up). I pull out the wick for 2 cm, cut the upper knot.

Despite the abundance of electrical appliances, the candles are still popular, and if you want to make a candle with your own hands, you need to know how to make a wick for a candle. Candles give a special mood during the holidays, they are able to create a special atmosphere during a romantic dinner, and the candles can come in handy during the disconnection of electricity, from which no one is insured. You can buy a candle in the store, but you can try to make it yourself - any shape and size, with various decorative elements or flavored. But before starting making a candle, it is necessary to make wick.

Fitil is a kind of capillary through which the molten candlestone falls into the burning zone. For each type of candle, your wick is made. The texture and thickness of the wick may depend on the thickness of the candle, from its material, from coloring, its filling with decorative particles and a lot of other. For example, there are candles that are only in the middle, and the walls remain entirely, and their phytylas are used for them.

For each candle, the wick is selected by the method of samples and errors, and sometimes it is necessary to try multiple options. It should be remembered that too thin wick will constantly go out, and the thick wick will smoke and the candle will melt.

Typically, the wick is gossipped from cotton threads. They can be twisted, rub the pigtail and even hover over the crochet, the optimal type of weaving is selected based on the features of the candle. If the candle is made of wax, then thick loose threads are used as a wick and intertwined them not tight, and for the rest of the candles, they use thin threads and tight weaving to avoid the soot. This is due to the viscosity of the molten candlestone: for more viscous wax, wide capillaries are needed, and lighter paraffin, stearin and various fats need thinner capillaries, otherwise due to the overaffect of fuel material, the candle will be very smoking.

Usually the phytilitis is impregnated with solutions with sodium nitrate, namely:

• 30 gr. Haired Lime, 8.5 gr. Sodium nitrate and 550 ml. water;
• 5 gr. Ammonium chloride, 5 gr. Sodium nitrate, 10 gr. Boers and 5 grams. Calcium chloride is dissolved in 500 ml of water.
• 1 gr. Ammonium chloride, 1 gr. sodium nitrate and 700 ml of water;

Make homemade philitol and as follows: Dissolve 2 tablespoons of the table salt and 4 tablespoons of the borants in one and a half liters of warm water and lowered a cotton thread or twine of the desired thickness for 15 minutes. Pushed wick suspended and withstand 5 days for complete drying. Then it is attached to the fit with the clips and dip in the molten wax 3-4 times to the full coating. After that, the wick is also suspended until complete drying. Store ready-made phytolites, wrapped in a newspaper.