What are the sizes of the steel bath

Today it is impossible to imagine a residential premises without a bathroom equipped with an appropriate bathroom, which can be steel different sizes. A shower device is usually less popular because it has limited applications, compared to the bathroom. Unlike the shower, the bath allows you to take therapeutic procedures using various info and decoction, as well as pearl or carbon dioxide baths using simple technical devices.

disadvantages

The most popular use of steel products, as the most affordable, fairly reliable and durable (up to 15 years of operation) of tanks.

Steel baths have some drawbacks, among which they consider the most significant:

• noise of water when filling the reservoir with water;
• fast cooling of water in the container.

But these shortcomings are easily eliminated by using low-noise mixers and uncomplicated exterior insulation of bath walls.

Forms and sizes

There are several varieties of baths, for the manufacture of which the steel sheet is applied.

Bathtubs standing: very little used variety of bathroom tanks. It is used to use by people who, due to certain reasons, cannot take advantage of other versions of the font. Dimensions: About 200 cm in height, length and width is 80 - 150 cm. The container is equipped with the door, the filling with water is produced when a person entered it and closed the door. When installing, you need a reliable mount to the floor, since the center of gravity is high, it does not exclude the possibility of tipping the container. In essence, it is a small basin. The weight of such a vessel is from 40 to 75 kilograms, the volume of liquid from 1 to 1.8 m 3, depending on the thickness of the metal.

Baths Sitting: Capacities of reduced dimensions, which are used in the bathrooms of economical volumes. The dimensions of the vessel specified in the figure correspond to one of the versions. In general, such tanks are performed with a useful width up to 90 cm, up to 130 cm long, up to 80 cm high. When installing, an additional fastening is required to the walls. Sitting containers are most appropriate for use or care for intimid people. They cannot be sophisticated, easier to place and leave it. The mass depending on the material of the manufacture is from 25 to 45 kilograms, the volume of water is 0.4 - 0.6 cubic meters.

Baths Lying: The most common type of bath tanks are produced by several sizes that correspond to the size of the premises in which they are installed.

The market contains the capacity of Russian manufacturers, the sizes of which are due to domestic standards:

• length - 150 - 170 cm;
• width - 70 - 75 cm;
• depth - 40 - 50 cm;
• the angle of inclination 40 o - 50 o.

The wall thickness of the baths is 3 - 4 mm, the steel sheet with special properties (deep exhaust) is used for their production.

Numerous models of European manufacturers are also presented, the dimensions of which are somewhat different from similar domestic products. What are they:

• in length - 150 - 1700 cm;
• in width - 70 - 85 cm;
• and 65 cm deep.

European containers are represented by a significant variety of forms and performances, equipped with various additional equipment. The coating of the inner surface of the acrylic layer is very popular. The bath capacity is 0.8 - 1.1 m 3, weight from 35 to 55 kilograms.

Weight and volume

One of the fundamental characteristics when choosing a steel bath is its weight. Nevers are those who consider high-quality lighter on the weight of the bath. It is possible that its walls are too thin, and therefore may be subject to deformation.

In addition to the wall thickness, which can be from 2.5 mm to 3.5 mm, and in some models and more, the weight of the bathroom affects the weight. Miniature models weigh about 13-15 kg, the standard form model reaches 20 kg, and the weight of full-size models reaches 40 kg. If you decide to bring the model more than 170 cm long, then be prepared for the fact that its weight will be from 35 to 55 kg. But, acquiring a heavier option, you can be confident in the stability of the bathroom.

The volume of the bath directly depends on the model and its size. In a standard bath, about 140 liters of water usually fit, but there are more overall models that accommodate up to 250 liters. You can find out the volume in the product passport, where it must be specified.

Main settings

We give the main sizes of the baths that need to be taken into account when selecting products.

Another parameter characteristic of steel baths - the distance to the drain hole from the edge is 290 mm. The rear pair of support legs is set at a distance of about 150 mm from the axis of the drain hole to ensure a comfortable installation of the drain system, the distance to the front pair of the legs is indicated in the passport on the product. What other factors can affect the choice of font:

• crucial in the selection of baths are the size of the room in which the container will be installed;
• the presence and size of another sanitary and economic equipment (in particular - washing machine), furniture and other things. Their placement should be optimal in terms of the possibility of moving;
• the depth of the baths and their volume are often visually the same, but they can differ significantly. Comfortable is the depth, allowing to be completely immersed in water, and it is 50 - 60 cm;
• if there are young children in the family, it is necessary to take into account the factor of their safety when used for bathing;
• width baths when using an adult man, should allow to settle down with a gap to shoulders in several centimeters, otherwise the adoption of the procedure will not be comfortable;
• additional factors can affect the accounted dimensions, such as the sinks installed above them, the presence of armrests or pens installed next to the font of furniture or niche objects, the angle of inclination of the capacitance.

The correct selection and thoughtful alignment of sanitary equipment largely determines the comfort of living, and special attention should be paid to the selection of font.