Bench from tires do it yourself. Tire crafts: flower beds, flower beds, shapes, garden furniture. Crafts from old tires on the playground in the house and on the street

Nowadays, more and more people are concerned about the reduction of garbage. Not the last role in this is played by the reuse of various items that have served, especially in the country. This is not only environmentally friendly, but also saves the family budget, and also allows you to show creative abilities. One of the most accessible for the manufacture of country crafts is old tires that can be taken free of charge in any car service or tire. Furniture, flower beds, warm beds and a variety of crafts, which make the summer cottage, are made from tires, which make the country garden and decorate it.

Crafts from tires in the country with their own hands: everything is from the preparation of the tire before choosing the placement location

Starting any work, it is necessary to choose the material and tools.

Preparing tires

Three-thin tires of European production are considered the most comfortable for cutting and disinfect. And experienced masters advise the use of winter tires - they are softer summer.

Before starting a creative process, tires need:

What instruments need

Can be useful:

Cutting tires is a rather time consuming process. You can not always choose the knife of the desired strength, not every dacket there is an electrolybiz. Those who have in the farm have preserved anti-sickle, which are now rarely used for direct purpose, can use their "antiques" in order to cut the tire.

Video: An interesting way to cut the tire with sickle

Step-by-step instruction for making a flower basket

Such a basket can be used for low colors, since the lands in it will not log in. Air construction will look good on the terrace or near the porch at home.

Procedure:

We prepare the tire as described above.
From the cardboard, cut out the template, we apply it to the bus, result.
You can not use the template for drawing a simple pattern if the eye of the masters is good
Cut the pattern with an electroll bison on both sides.
Electrolovka pattern on the tire cut easier and faster than a knife
We put the tire vertically, we mark the middle and cutting the surface in half.
Turn the bus.
Long ends twist and fasten self-draws.
To twist tougher ends, physical strength will need, sometimes it is better to do together.
At the bottom of the baskets we drift drainage holes.

Video: Master class for the manufacture of a flower basket of a tire

Collections of tire figures for the decoration of the country area

Human fantasy is limitless: flower beds, garden figures, decor and even furniture are made of the old tires. The site can settle the characters from fairy tales and exotic animals. In cloudy weather, the melite sun of the tire will raise the mood, and the objects of the rustic utensils, painted in polka dot or flower, can compete with flower beds.

Animal figures from tires

Beasts, birds, fish and insects made from their tires can be placed near the playground, if it is available in the country area, or in the recreation area. Be sure to pull them into bright colors, then they will delight adults and children.

Photo Gallery: animal figures on the country area from old tires

The red-yellow crab will look good next to a red brick house to make a cheerful bee, you will need three tires, wire and plastic for the wings of a green-yellow turtle that the funny zebra is not in a hurry. Harmonies with growing petunias. Hedgehog from the tires twisted With experience, the proud peacock will decorate any cluster of a brightly red puppy can be placed on the playground the most traditional handicraft with a tire - a swan figure A bright butterfly can serve as decoration and the basis for flower beds

Fabulous characters from tires

At many dachas, parents live with children or grandchildren with grandparents. An excellent gift for the beginning of the holidays will be the figures of the characters of favorite fairy tales and cartoons.

Photo Gallery: Figures of fabulous characters and heroes of cartoons from old tires

Naughty octopus from a cartoon about dad octopus and his children to make a very simply donkey with a cart - a whole artistic composition from the eastern fairy tales for the manufacture of a cheerful hare will need several tires of different quantities and swan from Pushkin's fairy tale - a whole artistic work near the beauty of the princess and frog and It's not boring the face and ears Cheburashka cut out of the bottom of large plastic bottles Mikhailo Potapych from Russian folk fairy tales guarding the site such a princess frog of three tires can make even a child: you will need a tourist mat, old hoses and plastic buplots head of the famous wolf from the series "Well, wait a minute!" can be made from waterproof osb or thick iron sheet

Other tire figures

Crafts from tires can serve as elements of the area decor. Bright figures are often used as flower beds. And if you glue the bottom, also cut out of the tire, you can make an original water container from a cup or kettle. Rubber saves warmth well, and this water is suitable for watering greenhouse landings.

One of the simplest figures is the sun tires and plastic bottles. It is done like this:

Prayer tires yellow or orange acrylic paint.
For tire painting, you can use special paint for rubber, which is sold in the can
In the bottles we pour the same paint and look carefully. After the paint evenly covered the walls of bottles from the inside, remove the plugs and put on drying.
We put the tire that will be a sun, on another bus-stand (it is also pre-painted) or swing in the ground.
Cut from plywood (10 mm) or thick metal (up to 5 mm) the circle and with the help of self-tapping screws attach to the bus.

« Change rubber is not the most pleasant lesson. Especially when did not plan to do this and wanted to hold out on the old season! " - Says my husband. But unforeseen circumstances happen, and buying new rubber does not mean that you need get rid of old tires! And they proved our neighbors in the country, which used tires.

Aunt Zina somehow took some old tires from the garage of her husband and began experimenting. And this process is so fascinated that after a month in their garden began to flow acquaintances to look at this miracle.

Crafts from tires for garden

And indeed, decorate the country area Or the courtyard near the house can be ordinary old tires. Many masters make real masterpieces from them!

In addition, in our country, the processing of used tires is not at a high level, and we can observe the rods from the tires thrown directly to the street. But you can also combine pleasant with useful and create decorations for the country area, the garden, the garden with your own hands, these crafts will be both functional and beautiful.

Editorial "So simple!" prepared 15 ideas for you, how to remake old tires To decorate the garden and at home.

Crawr trees

The simplest idea is to create a small flower bed with a tires.
To do this, leave the tire as it is, only brightly cut it and fill the earth. Nothing difficult. Even an elderly woman or child can cope with this, and such a flower garden will look great.
And you can put the tires on each other and make the seats and armrests from the top of the tire.
Stylish and unusual ornament for the garden!
Original place to relax in the fresh air.
Flower flower beds made of old tires in the form of various items are done like this: the tire is cut into two unequal parts and the one that is more turned inside out.
It is worth noting that the edges of the tires can be made of various shapes, the whole thing is only in fantasy and dexterity of the hands. In such a technique there are flower beds in the form of a mug, flower, vases. A huge rubber cup of tires looks very funny. And some craftsmen construct the whole tea set in their area.
And you can turn old and unnecessary tires into a wonderful space for children's games!
Another idea - Figures of animals from old car tires. They will create a mood on the garden or in the garden.
And what do you say about this original shell?
Do not doubt: everything that is being done for children is the most important thing. In the simplest option, you need to pour sand inside the big wheel - and the sandbox will be. The painted wheel, and even with the pattern, will decorate the site.
And installing an umbrella in the sand, we get the option for small VIPs. For them, on the inner rim of the tires, we put on the insulation for water pipes so that the kids do not scratch.
From the tires are just excellent chairs!
An unusual idea for the fence - tires laid on each other, powdered ground with lined fusioning plants.
Children will be indescribable delighted with such wonderful swing.
Original staircase to home.
And from old tires you can make a sole for shoes!
I really like this low coffee table with glass. Just and stylish, is it not true?

Cottage is not only a plot where it is necessary to take care of beds daily and collect harvest on time. This is a place that can open the creative abilities of the owner. In this article, we will tell about what crafts from tires for the garden can be made personally.

You should not throw such a valuable material for different crafts. There are enough options, as they can be disposed of in a mutually beneficial form. You can not only decorate the yard or make interesting obstacles in a children's corner, crafts for a garden from tires can bring and practical benefit.

Usefulness of material

Clearing the car tire in skillful hands can become anything. It is enough for you to have a sharp knife and chalk for marking. The disadvantage in the material you are unlikely to experience, as a sufficient number of constantly accumulates on the tire terminal.

Consider the positive properties of crafts from them:

Cost	Usually the price of used tires or very low, or they are just free.
Time and tool	You need from the tools: sharp knife; gloves to protect hands; chalk for marking. The work usually does not take much time, since all crafts are quite simple in the manufacture.
Resistance designs	The car tire is designed with such a condition so that it can stand for any weather conditions. The only negative is heated in the sun. Therefore, consider this circumstance when you make items from tires for the garden, for example, furniture and elements for the playground.
Care and service life	Practically do not require any care, you can simply wash them with soapy water. The life of such products is quite long.

Tip: Before starting work, draw the contours of the future product on paper and you can immediately start posting and cutting the bus.

What kind of garden crafts do it yourself from tires you can do:

garden furniture;
the basis for flower beds;
vasons;
elements for the design of the garden;
multi-level slides for plants;
interesting projectiles and obstacles for the playground;
swing;
low fencing.

Making Klumba

This is perhaps the most common product made of old car tires. You can simply put it on the ground and fall asleep with the soil on which to plant your loved ones. We invite you to approach this process creatively.

Prepare:

used a tire with a disc;
file;
sharp knife;
paint favorite color.

The instruction below will help to understand the process:

Put the tire of the plafhmy and draw the desired shape on it.
Start cut down the contour, periodically wasting the knife with water to facilitate work.
Remove the tire, which is often difficult to do, especially if the tire is made of thick rubber.

Tip: It is better to invite an assistant for such work.

Gradually turning it in a circle, immediately fix the bent items.

Take the soap and brush and well wash the tire.
Apply paint to it for outdoor work, you can in the form of a picture.

If it is assumed that the flower bed will be without a stand, close the lower part of plywood or tin, then the earth will not leave it. Various additional accessories will be able to give her an interesting look, for example, old shoes painted in the same color and installed nearby.

When you have a few old tires of different sizes, you will manage to make a multi-storey flower leaf. In this case, the vertex can be an old pelvis or a large floral vase.

Before collecting a shelf, paint the tires in advance, because it will be difficult for it, and then collect tiers. Also, also make each tire bottom, otherwise the soil will be seen. Such a flowerba can be used for flowers or for growing strawberries.

Interesting will be tires laid in a chess order. Bright and rich color turn out after the priming of the surface and applying paints in two layers.

Practical crafts

Interest will be and practical crafts for the garden from old tires.

Consider two options:

Non-slip track "It can be a good help in the garden." Thanks to her, you will not have herbs on the tracks, and protect the protector from falling. In addition, while you come to the house, all the dirt will fall off from your shoes.

Make them will not be difficult - cut the testers and bring them into nails or screw the self-pressing to several transverse sticks.

Another practical option - reliable country stepswho will not let you fall from the stairs. Rubber coating will create maximum friction.

Making Pufik

A cheap and practical option is a garden baffic from a car tire, which has already served his age. Although they are getting somewhat solid and heavy, but to make them enough simply. In order not to suffer with dragging, choose the place in advance on the plot.

Output

Use of the old objects who have narrated the ages, in particular car tires, allows you to transform the country area. The models presented today are only a small tolik of what you can do from them. Fuely to creative charge, patience and present the original subject for your site. Video in this article will help you find additional information on this topic.

To make something beautiful and useful things are always nice. A visual example of such creativity is beautiful flower beds. It is easy to build them, and the benefits of them are huge. But on this fantasy of country masters is not limited. Of the old wheels, which often simply roll on the road and pollute the environment, they make outdoor furniture, sculptures for the garden and even remove small children's towns.

Such a simple and unsightly look at the first eye, as old car tires, in fact, as if specifically created in order for each dachnik to feel like a real artist and decorate his plot with real designer flower beds and original copyright sculptures. Cut from tires can be, without exaggeration, anything. Such crafts are along with those that are made of plastic bottles all year round will delight the eyes of the owners and guests of the cottages, and most importantly, they will not require special financial investments.

It is also nice that the benefit from the idea of \u200b\u200bmaking crafts with your own hands from the tires is double: on the one hand we will dispose of a wheel that contaminated the environment, and on the other we get original garden decoration or flower bed.

Crafts from rubber, used tires, are affecting the variety and how much the fantasy of their authors. Here are the ones that are most common:

In the photo - flower beds from tires

Small flower beds. The easiest way to manufacture a bed of tires is to leave the tire as it is, it is only bright to decorate it and fill the earth. Nothing difficult. Even a weak woman or child will cope with this, and such a flower garden will look great.

On this photo - Cups made of old wheels

Floral flower beds from old tires in the form of various items. Make them harder. The tire is cut into two unequal parts and the one is more, turned inside out. It is worth noting that the edges of the tires can be made of various shapes, the whole thing is only in fantasy and agility of hands. In such a technique there are flower beds in the form of a mug, flower, vases. A huge rubber cup of tires looks very funny. And some craftsmen, thus, build a whole tea service on their plot.

Turtle from old wheels

Flowers and sculptures in the form of animals and fabulous heroes. Funny tire frog, good gnome, mysterious unicorn, beautiful swans, three-headed dragon, turtle, luxurious carriage, huge phone - easier to list what is not made from this available material. The only condition is to think over the composition from the very beginning so that there is no unpleasant surprises later.

In the photo - multi-tiered flower beds for flowers or berries

Multi-tiered flower beds from multiple tires. The simplest performed is a three-core, but the number of parts can be more. There are several identical or different tires, put on each other or in a checkerboard order. Speecually looks at a tire well, stylized under the real and equipped with all the attributes inherent in it: a chain, a visor, a bucket. Such a flower garden can be used as a vertical bed for growing berries and vegetables.

Tire beds for strawberries

The flower bed for strawberries from the tires will take at least a place and give a rich harvest. It is perfect for the cultivation of seedlings, greenery, pepper. From such a flower, you can make a fence for the bush of raspberries or currants or make them a few and distinguish between the vegetable garden to cultural zones. It is worth mentioning that the tire well often make not only decorative, and they mask the drainage pit or septic tank.

Experienced masters and masters know many secrets that help them create garden sculptures and flower beds with their own hands. They understand the best of all, how to make unique and unique copyrights from an old nobody. Here are just some of these secrets:

The best tires are suitable for work, as the rubber on them is softer and easy to cut it. But for their lack of absence, domestic products will rise. In principle, and they are fairly easy to process and allow you to give different shapes from them.
Tires intended for operation in winter roads, more pliable, lungs in stripping and convenient in processing than those used in summer.
The longer the tire was used and the more she was worn out, the more thinner, softer and the easier it will work with it: cut and turn.
Before proceeding with the creation of the crafts, the material must be prepared: thoroughly clean from dirt, but before painting degreases.
For cutting of automotive tires, use a sharp knife, with a subtle volat. Check how well it is sharpened, you can spend the blade by a notebook sheet, holding it on weight. If the knife does not cut or bloom the paper is not acute enough.
Cut the car tire for garden sodes is more convenient if you periodically lubricate the knife with machine oil. So it will be easier to enter the rubber. The oil is suitable and spent.
When you need to cut some curly elements, markup is applied to the bus. It will help achieve a more accurate and accurate result. Apply it is most convenient than the usual white chalk, as a last resort, the marker.
From what paint to paint rubber, the durability of crafts depends. For old wheeled tires, both automotive paints and any paints for street work are suitable.
Before painting the tire, its surface is recommended to be primed. The primer with the addition of a small amount of PVA will strengthen the strength of the coating and will reduce paint consumption.
Paints in aerosol can accelerate the process of staining to 20-30 minutes, and the stainable layer itself makes more uniform.
Decorative finish can be made of girlfriend. For example, plane the surface of pebbles, bottled fragments, or lay out pictures of colored covers from plastic bottles.

Collect the flowerbed from the tire is better not only with external, but also from the inside. So they will look more aesthetically, and black rubber will not break from the inside.

Of course, each wizard has their own secrets, and all of them are unrealistic. And when you do this exciting business - a tire sculpture, they will certainly appear with you.

Several master classes for making crafts from old tires

As mentioned above, crafts from tires are diverse. Their appearance and purpose are limited only to the fantasy of the wizard. We suggest you familiarize yourself with the basic models. After reading them, you will learn how to make a flowerbed from the tires with your own hands and you can create original, unlike other and useful garden accessories themselves.

Simple flower bed

A small flower bed, made as a chamomile from one tire - the simplest basic model. Such flower beds can be done somewhat, arrange them hardly and decorate the approach to the house. Sometimes they are placed on asphalt or paved tiles.

We need:

One old tire.
A sharp knife.
Marker or chalk.

Marker are placing a cut scene. We will cut the tire on them, from thickening to thickening.

Before cutting the tires, make sure that they do not have metal cord that can spoil the knife. Usually they are inserted into the tires for trucks.

We cut the tire throughout the circumference with smooth zigzag petals of any form on your choice (triangular, oval, semicircular).

I turn over the tire and work with its back side. Driving a knife along thickening, cut the circle from the back side.

Then throughout the circumference inside the tire approximately every 20-25 cm we make transverse cuts from the cropped edge to bend (the end of the tread).

After that, the tire must be turned out. Flowerba is ready. It remains only to paint it, giving it a more attractive look, fill the earth and plant plants.

For greater visibility, see the following video:

Garden Vase from Old Wheel

From the old wheel in a short time you can make a beautiful garden vase.
Such vases look better in a pair in front of the house, on different directions of the door or a porch. Consider a step-by-step master class in their manufacture.

We need:

Tire with disk.
A sharp knife.
Chalk or marker.

With a chalk or marker along the entire frontal circumference of the tire, place a zigzag line, on which we will cut. Thanks to her, the vase will look like a large flower with a lot of petals.

Cut the tire along the placed line with a sharp knife. To facilitate the process, the knife is periodically loose into the machine oil (suitable and spent).

After the wheel is cut, check whether it is not left to the end of the cut plots, and proceed to turning it. It is better to do it together with an assistant, not in a hurry, in parts.

After we managed to turn the tire for future flower beds, it turned out that there is a camera in the wheel. It must be cut and throw it out.

Vazon ready. Its bowl turned out of the main part of the wheel. Disk from tire no need. It serves for a vase with an elevation and stand, and the tire remains at its base is an extra support.

We can only clean, degrease and decide how beautiful to paint our new garden vase. When you fall asleep in the bowl of the earth, do not forget to put the gasket on her bottom, so that the Earth does not pour and do several holes in it for draining water.

Video Instructions for the manufacture of a vase:

Swan from the old tire

Most popular garden sculptures from tires - swans. Usually they are placed near the artificial pond, which gives the site a stunning view. You can land the grass and in the bird itself, then the impression will be created that it looks out due to vegetation. Make it will help detailed step by step instructions with photos.

We need:

A sharp knife.
Electrode to do the holes for entering the knife rubber.
Grinder or file.
Electrolzik.
Chalk or marker (better still marker).
Wire 5-6 mm in diameter (rigid, to give the shape of the neck "Swan").
Plastic clamps (for giving the shape of the head).
Roulette.
Gloves.

According to the scheme, we place on the surface of the bus surface of the future swan to the following video, in which the author uses the size of inches, calling them in the international measurement system - Inch. Inch (1 inch) \u003d 2.54 cm.

The accuracy of markup depends on how beautiful and neat our sculpture will turn out.

Start cutting out. In the initial section, the drill drill 3-4 holes at a distance of 3-5 cm and cut the tire between them with a knife. Insert the jigsik into the resulting section and start cutting the swan.

After all the contours are cut off, turn the tire. We try to do it carefully, since careless movements in the most subtle places can be broken.

To the figure of the bird looks more neat, all sections are smoothing along the contour of grinding.

To give a shape, swans insert wire into it. For this, in the center of the neck and to the end of the body every 20 cm drills holes. We put the wire and fix it in the holes with soft brackets.

We form your head. We make longitudinal feeders and holes, as shown in the photo and with the help of the same wire or plastic clamps give the swan's head.

Our tire swan is ready. It remains to paint it and make a stand.

Swan can be painted white or not to paint, leaving black. Kryv make red. Very nice looking swans in a pair: black and white.

Without stand, soft rubber swans will not stand. As it, you can simply take any bus and paint, for example, in a blue color. Thus, it will symbolize the pond. And you can not be lazy and make it curly.

Figure stand is made similarly. Location on the bus tire, according to which we cut, cut the tire on it, turn and paint.

In a similar technique from tires, you can make any figures: animals, birds, fairy creatures.

But if you do not want to mess with complex markup and sharp, you can do it easier. For example, assemble from the whole tires of a cute frog.

In the photo - Flowerbed in the form of a frog

A frog made of tires is very simple. From one or more tires rarely collect the body and head, from small wheels, for example, from a baby carriage - eyes, and from rubber cuts of the paws.

Flowerbed Romaista

The decoration that is being done is easier than this flowerba is difficult to come up with. Despite the fact that there are several automotive tires for her, it is possible to assemble it literally for 15-20 minutes, it looks pretty, carefully and will never be superfluous.

We need:

Three old tires of the same size.
A sharp knife or Bulgarian.

All tires, pre-denotably sections, cut in half. Before cut to find out if metal cords are in rubber. The knife will not take them, so use the grinder.

To give the future flowerbed aesthetics, you can paint the tires. Do it better in advance, immediately after cutting.

The tires served as its term - excellent material for the design of the household plot, cottages. The main requirement is a well-preserved forms of tires, and then you will need only a little fantasy and some free time.

Chair

The back of a sheet of plywood and legs from the former bedside tables, plus a thick tire. Stip the details together with strong screws. Fill the seat with a pillow or screw the circle from plywood. Decoration is suitable for decorative cords, upholstery fabric, and you can just paint the street.

Table

As a basis, you can take an old coffee table or assemble it from the plywood sheet (cutting around the form of a circle) and 4 legs. Top on the table top we put a tire, screwed up self-drawers and decorate it with a cord or rope. Rope is well attached to the usual PVA glue.

Border

Cut the tires in half. Do not save and do not cut, as they are advised sometimes, on 3 parts. If you enter the ends of the seals to the ground, the design will become almost eternal. And the high side will become a good barrier and for a scooter, and for a bike.

Prompt! Color the finished fence, getting rid of gloomy black.

Fence

It will take a lot of tires, but the result is worth it. We fold the tires on each other in a checker order. We tighten them with each other self-drawing. For stability, each tier is falling asleep, making the bottom in each ring from the girlish material (plywood, rubber, tin). To the ground we plant lawn grass, maiden grapes or other ampel plants. Every year such a fence will only be a good.

Gastemitsa

Deep tire is a good base for the newsmeal. Cut half or third part. We screw the legs of the tree or metal. Choose a suitable shade for painting to the interior: silver, white, scarlet, etc. Stylish accessory ready.

Swing

There are many options, from the simplest, to complex. The easiest thing is to choose a branch of an old tree stronger, and tie a tire to it with a durable rope. Tarzanka version is ready. The kids will be delighted if using the loop mount, and attach the head and the tail of the horse from the same rubber.

Flowerbed and Pendant Flowerba

In any convenient place to put a bus on the ground, we fall asleep in it a good soil, plant flowers. Wonderful flowerba is ready. Children can be charged to paint the tire. With the help of acrylic and oil paints it is easy to turn into a work of art. If you have a chain and a place to hang it, it is very easy to make suspension porridge. With the help of bolts secure a chain to the wheel, and you nourish the bottom of the metal from the bottom (the old bucket is suitable).

Tip! For hanging it is better to use a small tires of a small diameter, as they are easier.

Rocking

You will need: 1 tire, wide board, 2 handles. We cut the tire across in half and put the halves on the ground ends up. To these ends, fasten the board with 2 rivers that screw themselves with self-draws and to the board, and to rubber. At a convenient distance from the ends of the boards, kpripim handles. After the paint gets up, you can call children!

Washbasin

Street washbasin is easier to make an old wheel. It will take a round washer corresponding to the inner tire diameter, a mixer and a waterproof. In such a design, the tire plays the role of the stands, which can be suspended, or put (then fasten several tires together).

Chandelier

The tire is a finished base for the ceiling lamp. Behind the inner rim it is easy to hide a conductive cable and fasteners. You can hang to the ceiling such a chandelier on chains, decorative cords, special holders. Plafones from the old chandelier or new from the store will help to make a nice lamp.

Little diameter wheel from cars or a baby carriage is a ready-made feeder for feathered guests of the garden. Tie a rope to it and hang up near the beds. You can decorate not only with paints, but also figures from tin, decorative brushes.

We remind you! Do not forget to pour food!

Armchair

Two tires put on each other and secure bolts. The hole can be closed with a piece of plywood or a grid woven of rubber strips. The back and armrests cut out of the third tire and scrape with the seat with self-draws. That's ready for the All-Year Chair, which is useful in the garden or at the pond.

Rack for bicycles

Consider the number of bicycles in the house and add more 1. So many halves of old wheels will need to organize parking. We cut the tires in half and get half the ends into the ground, building them in one row at a distance of 10-15 cm apart.

Lenhing for cat or dog

We buy in the furniture store chassis - 4 small wheels with a solid metal fastening. Take a tire and screw the chassis from the bottom side. Above the lush pillow in the hole. Now invite a pet for a test drive!

Trash can

It is easy to organize a aesthetic garbage collection on a plot: you will need only 2-3 old tires. We put them on each other, fasten with self-draws and stain in the oil paint in a merry shade. Inside insert a durable plastic bag. You can use!

Sound column

For a subwoofer, a thick tire is excellent, and the shockproof case! It will only be necessary to attach legs.

Palm

Find 2-3 strong logs of arbitrary shapes and heights. Well sand and paint. To the upper end screws, screw 4-6 large leaves cut out with garden scissors from old tires. Leaves for believable paint into a green color. Intect "Palms" on the playground in the ground. Under such an "umbrella" is well located swing, chairs, etc.

Sandbox

Success of the venture in the large diameter of the tire. The option from the tractor is ideal! Just put an old wheel on a flat pad and pour clean sand. In the center, put a beach umbrella from the Sun to the kids to play comfortably.

Stairs

A chic way out of position if the site has a big bias. The real staircase from the stone is expensive pleasure, and the old tires can be simply putting, slightly forming in the soil under them shovel. Over time, such "steps" themselves "will rotate" to the ground, hardening the design. In the center, pour not too large crushed stone or plant the lawn grass.

An excellent projectile for future climbers is a tilt-tilt board with a height of 1.5 m, to which tires of different diameters are screwed. Climb on such a slide fun and very useful for health!

Stand for umbrellas

We put the wheel on the edge. I screw the furniture legs below. Top of cutting round holes for umbrellas. For aesthetics, openings can be arranged with chief. We choose a place in the hallway to attach a stand, best - in a free corner.

Figures for the playground

A sharp knife and old tire - that's all you need the master to work. The network has a lot of samples for crafts from thick rubber, but you can be guided by your own fantasy. Rooster, swan or goldfish entrust to decorate the defector - they delighted such sculptures with acrylic paints.

Pond

Frogs are found on your site - organize a pond for them. Choose a place where there is access to water. District in the ground of a large diameter bus. Insert the thick piece of durable polyethylene into the side. Put on the bottom of the pebbles. The edges of the captured tire disguise with decorative stone. You can pour water!

Puffy

Cut from the sheet of plywood two circles, a slightly less than the maximum tire diameter. Screw the circles below and from above, closing through holes. Next, we take a thick decorative cord (you can make several colors) and gently put the entire surface of the puff behind the turn, gluing the liquid glue of PVA.

Snowman

Such a snowy woman does not melt with the first spring warmth. Take a few old tires and paint white paint. One of them make a "face" from plywood and draw eyes, nose and smile! Old bucket, scarf and sweaters only add realism.

Frame for mirrors

Screw the shield to the wall to the wall and close the hole with a circular diameter mirror. Such a design is perfect for the shower at the cottage.

Tip! Take a narrow tire so that the mirror is not "stoley" space.

A swing hammock will be obtained from a large diameter tire, if you stretch a strong mesh in the hole, and fastening on 4 chains to a tree or other rack. It is important not to go about the defers, and do not hang a hammock too high.

Sole for shoes

Fingering favorite boot? From the tire of a small thickness, it is easy to cut a suitable size of a kit or a patch, which is planted for ordinary shoe glue.