How to make a bench with your own trees. We build a simple garden bench. Drawing of the Garden Bench "Transformer"

Perhaps only the classic garden costs without benches, except for potatoes or cucumbers in the garden should not have anything. But even a small garden is hardly possible to imagine without benches. The garden is still intended for rest and love by nature, and standing is not very convenient. Currently, the choice of such structures is large enough, wooden and metal garden benches are especially popular.

Types of garden skams

Regardless of the design and size, the purpose of any bench remains among the same - it should give a person the opportunity to sit down, relax and slowly enjoy the view of the cozy garden. You can classify benches in several signs, for example, by the material from which they are made in design.

Materials for the manufacture of garden benches

Several popular materials can be selected:

plastic - The advantages of benches from this material include resistance to climatic influences, low weight and relatively small price. There are options for folding structures on sale, it is convenient to take them with it with periodic departures to the cottage;

a tree - benches for the garden with their own hands, as a rule, are made precisely from this material. The tree looks great in the garden plot, and indeed it is considered a classic, and the classic is always in price;

Note!
Wood, even subject to the applix of protective coatings, is much less stable, for example, to moisture and insect than plastic, stone or metal.
So wooden will fail the first.

metal - As for metal products, it is possible 2 options: homemade benches from the profile pipeline or forged. Forged benches from scratch it is impossible to do, not possessing blacksmith skills, the maximum that can be done - to buy ready-made forged sidewalls and then collect the bench itself;

garden benches of stone - record holders in terms of durability. Under the shop can be accommodated 1-2 large boulders, or use purchased marble and sidewalls, the whole question in price and in the overall style of registration of the site;

concrete - the sidewalls can be completely calmed out of concrete, and a concrete slab will perform in the role of the seat;
combined options - The most common type is a combination of a metal frame and wooden planks (back and seat). There are options for combining stone and wood.

Note!
The use of wood makes a bench more comfortable.
In cold weather, there is little pleasant to sit on the ice metal or stone, a tree from this point of view is preferable, because its thermal conductivity is much lower.

Options for garden benches

At first glance, there is nothing complicated in the design of the bench - 4 legs, the seat is back.

But more complex structures are found:

a bench without a back - the simplest option, a dubious option from the point of view of comfort, because it will not be possible to distinguish and relax;
garden bench with a back - adding the back displays the comfort of rest to the new level;

bench with a table - with this embodiment, a pair is installed on one base. Such a design is optimal for socializing;
bench with a canopy - can be viewed as an analogue of mini-arbor. Nevertheless, protection against oblique rains is weak, so we should not consider such a design as a complete replacement of the arbor;

the benches created in the artistic style, the focus in this case is done on the appearance. Instead of standard sidewalls, for example, figures of fairy creatures can be used, etc.

If a shop in your garden is not planned in the form of a large stone or a shedding trunk, you will have to spend some time to think about the design and counting the required number of building materials. Corrected drawing is the main basis of a good shop.

Drawings of garden benches made of wood, and from any other material, be sure to contain not only the general image of the structure, but also the detailed dimensions of the main elements.

Wooden bench

There are several manufacturers:

use as basic elements of large wood trunks. Half of such a trunk may well lie on Earth and due to the large thickness to perform simultaneously and the seat;

just insert a couple of columns (or concrete) and use them as a basis of design;
the design of BRUSEV is the most common option. It makes sense to consider the example of such a design.

As for the sizes, each selects them on the basis of their vendors to the bench, but can be focused on such values:

in height, the back is most often not exceeded 50 cm;
the height of the shop, that is, the distance from the surface of the earth to the seat surface is also taken approximately equal to 50 cm;
the angle of inclination of the back is important, it can be taken in the range of 15 - 30ᵒ.

Note!
The price of the shops from this will not change, and the photo level of comfort can seriously suffer.
If the back is at a right angle to the seat, the back will be constantly tense and can be forgotten.

The design of a typical wooden shop looks like this:

the sidewalls are collected from wide bars (as a rule, the sidewalls are connected crosswise with a selection of grooves in the connection site). The part of the crossbar that will also be the basis for the back is done longer to the height of the back;

if the width of the shops exceeds 2.0 m, then to ensure the stiffness of the same design, as well as on the sides, you need to place the seat in the center, otherwise the weight of a person will be very fastened.

one whole sidewall is connected by square bars. The load on them will be small, so you can use a small cross section;
after that, garden benches and benches are trimmed with wooden planks. It is not necessary to make a solid trim, between individual plars you can make gaps 1-2 cm;
at the final stage will only be covered with a tree protective compositions.

Metal and combined shops

Pure metal structures are not so often. The fact is that the weight of such a design is quite large, and the cost of the product grows. Therefore, the seat and the back, as a rule, is performed from wood.

Combined options can be made with your own hands, it is mainly about structures using the profile pipeline.

All work comes down to performing multiple items:

the side parts of the frame are made of pipes. The optimal option can be considered the one at which the entire sidewall is made of one pipe. Of course, you can use a welded joint, but it complicates the execution of work;

Note!
The homemade garden bench made of wood and metal, most likely, will require a flexible tube.
For this, either pipe bender, or other methods (for example, filling the pipeline with sand) and the subsequent bending is manually.

when painting a frame with wooden planks, a bolted joint is used.

In the case of forged structures, everything is much easier - the forged parts are bought, and the gardener remains only to choose a suitable tree and enjoy them a metal frame.

Stone benches

When it comes to how to make a garden bench from stone or concrete, it all depends on the overall style of the future design.

You can select several options:

a small shop can be made even from small stones. In this case, oblong boulders for supports are used, and flat stones are for the seat. Most often, such structures cost no backrest;

Note!
It is allowed in such structures to use a little solution so that the compound of the supports and the seat is more durable and reliable.
The solution should not be seen.

the original bench in which both racks are made of masonry (using natural stone), and the heavy marble plate is simply laid on top. You can still at the laying of supports, slaughter robbed the frame for the back in them, and the back of the back is forged.

Unusual design

In a separate category, you need to highlight the copyright benches, or rather will be called them by the work of art, the simplest recreation device. As for the material, the greatest scope for creativity gives the use of wood, of course, in this case, detailed drawings of benches for the garden are not needed, it is possible that you can estimate the overall dimensions of the design.

Attention deserve such options:

the ring shop is the usual design, but it is arranged around the tree, an emerald green lawn looks unusually in the place of the usual seat;
the bench can be arranged between 2 flower beds;
curious looks a bench, arranged, for example, in the mouth of an animal;
stone articles can be decorated on both sides with elegant statuette;
you can make a bench in the form of a huge bamboo ligament, in the central part of which is a cutout for seating.

In conclusion

Garden benches are an excellent polygon for creativity. Despite the abundance of standard structures, you can always stand out and come up with your own shops. Of course, the flight of thoughts should not go to the detriment of comfort. The proposed information will help navigate the mass of standard benches and offers several unusual options.

On video, this article shows an example of the manufacture of a garden bench.

On each household plot there must be some benches and benches with backs, so that you can rest in good weather on the street, sit under a gentle sun and just resting from work on the garden. You can buy such a wooden or metal bench, but you can simply make it with your own hands. In this article, we will look at what kind of shops are and how can one of them can be done on their own, having all the necessary tools and materials at hand.

As presents

Bellows with the back There are a large number and every owner of a country house or cottage chooses for itself the option that bestows to the exterior of his subsidence.

Vegetables are the most different depending on their scope.

Conventional beenesses with the back are suitable for any subsidence and perfectly fit into the exterior of the yard. They are comfortable and very practical, as they have a simple design and unpretentious in their appearance. It is suitable for installation near the house, in a gazebo, near the pond, etc. can be made of wood, metal, stone, and also be combined (from wood and metal, wood and stone, wood and brick, plastic and other building materials).
Corner shops will greatly look there, where it is impossible to put a conventional large bench with the back. They can be placed in the corners of the gazebo, in the gardens, as well as in any convenient location on the household plot. Such benches can be metal, wooden, stone and combined.
Conventional benches without a back can be installed anywhere, as they are universal and comfortable enough for any country house. They can be easily made with their own hands, as they are made according to the usual standard classic drawing.
Oval, round or semicircular beenesses with a back and no backrest will look great in the center of the same round gazebo, in the center of the garden or elsewhere, where they will create an aesthetic exterior of the entire furniture site, as well as perform their immediate functions. Also in the center of a round shop can grow a tree, a green bush, blossoming beautiful flower bed or even placing a children's sandbox. It all depends on the fancy of the master and the functional needs of the owners of a country house or cottage. They can be performed from wood, metal, stone, as well as in a combined form from various natural materials compatible with each other.

Photographer: Garden benches with a back of a tree with their own hands - types and designs

Wooden shop with metal legs for garden Wood shop with metal wrought-iron legs for garden Corner wooden bench with brick support Semicircular wooden shop on a brick support Wooden Bruce Bevel for Garden with Back Decorative wooden bench for the garden with flaps from flowers for flowers Classic wooden bench for garden with handrails and backs Round wooden bench with backrest for garden Original all-style bench for garden Wooden bench on the supports made of natural stones for the nursery Wooden bench with concrete supports in the form of flower flower Wooden bench with wooden supports in the form of flower beds Wooden bench with wicker back for garden Stone Designer Garden Shop Square wooden benches for the garden

Preparatory stage: drawings, sizes, inclination angle

Before starting to make a shop for your homeland from any type of material, you need to spend all measurements and make an accurate drawing of the future design. This is necessary so that it turns out to be smooth without distortion and rolls. Also, the design scheme will help calculate the required amount of material for the manufacture of a bench of any type.

For the manufacture of wooden structures for the household plot, pine, oak, birch boards or brica are usually used, and a pear, a grob and a durable larch. Almost any tree is easy to handle, has excellent decorative qualities, and also aesthetically fit into the country landscape. The main advantage of the tree is his beautiful aesthetic appearance. But meanwhile, it negatively transfers the ingress of sunlight, high humidity and low temperature (severe frosts). Therefore, wooden shops are best installed in closed arows, on covered terraces or manufactured by their portable (collapsible) so that it can be removed into a closed room (pantry, basement, chulad) for the winter.

Steel supports will become the most competent choice for the manufacture of a wooden seat bench and the back for placing it on the cottage or country house. Such a bench will last you at least 15 years old, and it will not have to be removed during snow or rain.

How to make a wooden bench with your own hands

For the device of a wooden shop, we will need:

Before proceeding with the manufacture of a wooden portable shop, you need to cut the boards to certain elements:

All prepared boards must be seized, smooth out all the side parts and soak them well with an antiseptic. Then leave until complete drying.
We note the height of the bench 40 cm. Starting from the middle of the highest part of the elements of the longest legs that will keep the back, it is necessary to make an oblique slice at a small angle of about 20 °. Then all the corners of the bars need to be cut and polished on both sides. In this case, the back will have an inclined form. Sections should be strictly the same otherwise the shop will turn out to be overwhelmed and will have an unattractive look, and it will be uncomfortable.
We collect leg legs. The distance between the legs should be about 28 cm. Front (facade) and rear wooden pairs of a bench for support with an invisible inside need to be copper with the help of cooked bars and self-tapping screws. The legs connect the timber, which is reusing on the entire width of the design - by 50 cm. The strapping is best done double - on top and bottom.
In order to protect the self-tapping screws and screws from premature corrosion, it is necessary to drill the necessary holes in advance and block their heads into the board slightly.
On the frame of the benches, as shown in the drawing, with certain intervals (1 or 2 cm), nail or screw the planks. Three planks will go for seating and two backrest boards. After all the elements are packed, it is necessary to check the level of correctness and evenness of the entire design. For greater reliability, stability and rigidity, the legs are shot down by planks on both sides. It is advisable between the planks to leave the gaps of several centimeters for better air circulation and drainage. The backrest (first bar) we are krepim at a distance of 20 cm from the seating, and the second - at a distance of 38 cm from the seating.
The construction of the shop must be strengthened and for this it is necessary to make the bottom strapping of the legs. To do this, take two vehicles with a length of 1.5 meters and screw them to the front and rear legs of a bevel frame.

Finish shop

After completing all carpentry, the shop must be fully treated with flame retardant and then coat a waterproof varnish in several layers or ordinary oil paint.

If you want to make a bench more aesthetic and the designer beautiful, you can simply cut the boards along and then fill them on the diagonal, crosswise or "tree".

Production of a garden shop from a tree and metal

The bench with a back, wooden seat and durable metal legs, will be the best option for garden furniture, which can be installed on its homestead. This design, even in winter, you can easily leave on the street.

Material Calculation and Required Tools

For the manufacture of a shop, we will need:

One iron corner with a shelf with dimensions 40 - 50 mm;
One bar for the manufacture of a bevel seat with a thickness of 40 mm;
Special bolts;
Hacksaw or bulgaria;
Drill;
Screwdriver;
Electric or gas welding machine;
Sand paper or grinding machine.

Step-by-step instruction

Metal corner must be cut into four pieces one by one meter for the manufacture of vertical structures. Cut off five segments by half a meter and two segments one and a half meters for the manufacture of a frame for installing seats and backrest boards.
For the manufacture of the back and seats, we cut off seven slats from a bar with a length of 1.5 meters long and 10 cm wide. Altage them and well smoothed all the side parts. Well in impregnate all the boards by an antiseptic and leave until complete drying.
The ends of the connecting parts from the iron corners are cut off exactly at an angle of 45 ° and then we convex them with hot welding. To begin with, we make a frame for the seat of the seating and weld the iron legs well for the subsequent fastening of the backrest, as well as the stops. In the process of welding, it is necessary to use protective equipment.
In the seating boards and the backs, where the mounts will be fastened to drill holes for special bolts. After welding work, the metal structure must be finely polished in the seams in order to eliminate all irregularities and tubercles. Then treat the metal with a special anti-corrosion coating and oil paint in two layers.
To the finished metal frame bolts we are secure ready-made backrest and seating boards. Pre-board weeping with flame retardant (preferably saline) and then cover a good layer of water-repellent varnish or color paint.
On the ground it is necessary to make marking under the legs. To do this, it is necessary to dig up four pits in a depth of about 50 cm and pour river sand to the bottom (about 10 cm), and on top of a small gravel (about 20 cm). Top filament pieces of rubberoid and put the reinforcement grid. In the pits, we set the legs of the shops and the level of the horizontal level of construction. Then pour legs with concrete (the ratio of sand and cement 3: 1).
If you plan to put a shop on a conventional asphalt or a powerful surface, then the foundation from concrete is not necessary. The legs of the design are made of four segments of an iron corner of an approximately halfter length. For greater resistance to the bottom of the corners, it is necessary to welcome square "heels" or strengthen the entire design using the bottom metal frame.

Finish

All metal structural elements need to be treated with anti-corrosion tools to progress. Then paint the usual oil paint.

Wooden elements are impregnate with special anti-grapple agents, antipiren, and then stain with waterproof varnish or colored oil paint.

If desired, the metal parts bench can be decorated with various forged iron patterns that can be seen independently or purchase ready-made in special firms.

A bench for a household on a brick support

Material Calculation and Tools

For the manufacture of a shop we will need:

Building brick;
Wooden boards (thickness of about 40 mm);
Tutu self-tapping and screws;
Several cement bags, small sacred sand (6 bags or more) and gravel.

Step-by-step action

On a powerful stone and concrete terrain, a shop must be put on a cement foundation. On the soft land it will be necessary to make a column foundation.

We carry out the placement of the territory for the device of brick racks and remove the upper layer of the soil (Run). Pump the holes with a diameter of 20x20 cm and a depth of about 50 to 60 cm for the foundation device. At the very bottom of the wells, we fall asleep sand with a thickness of 10 cm and on top of a crushed stone with a thickness of 20 cm. All this is well tamped, we pour out a little water and leave for a day.
Top to put some pieces of rubberoid and put a bundle of five reinforcement rods in the hole. All this is poured by concrete and give hard or four days to harden. For the kneading concrete, we take cement, sand and small gravel (1: 3: 5).
On the prepared foundation put a small layer of liquid concrete (1-2 centimeters). This will be the basis for the future brick decorative base. Next, we begin to lay a ligation brick. The masonry is made necessary for the design of the width, that is, such as the bench itself or a little already. The height of the brick masonry should be about 50 cm. Inside the masonry on the top row we leave the place to form the shelf for the next installation of the floor of the shop.
Seat boards We fasten with each other with the help of boards and screws. Then set the finished shop on the cooked brick supports. We impregnate the tree with the flame retardant, give dry and coat with a special water-repellent varnish or color paint.
Also, depending on which length there will be a bench will need to make several brick supports. Corner or curly (semicircular, round, oval) designs are best installed on a solid brick base, which will be located on the foundation of the ribbon type.

Finish shop

All wooden planks we process anti-gribrants and flames, and then ground and coated with waterproof varnish or ordinary oil paint. Brick masonry does not need additional finish, as it itself looks sufficiently beautiful and aesthetic. If you still want to make it another color, you can also paint the oil paint.

Video: how to make a shop for a country house yourself

If you make a wooden bench and metal with your own hands, you can, for many years to enjoy the fruits of your work and relax on it in the shade of fruit trees. With proper and timely care of such a wooden bench with metal or brick supports will serve for many years. But in winter or in the fall she did not suffer from heavy rains or snow, it is best to clean it in a closed room, if possible. Regular care will be able to significantly extend the service life of your shop on the household site.

Good afternoon, today we will do a variety of benches with your own hands. I collected this article all simple ways Make a comfortable and beautiful bench itself. I will give detailed explanations and demonstration photos, and I will tell you the most clearly on how to make a bench from wood (timber and boards) and protective materials (pallet pallets, old chairs, boxes and other). I will also give drawings, assembly schemes, and step-by-step master classes.

All collected models of country benches I will post as they are difficulty - that is, we will begin with the easiest and simple and concise ways - and finish real professional products worthy of the hands of the master. After this article, you will feel that they have become a master who knows a lot about and easily make a bench completely from any material, even if it is a bit. And the bench will be firmly standing on their legs and years will serve your family. And how to know, maybe you can even sell your benches to the neighbors - because they also want to have such country shops on their plot. And later you will begin to do and also according to my lessons.

In this article, as well as in the following article of this cycle, we will look at ...

Benches made from old chairs.
Bench goat in french style
Beautiful manufacturer benches from bed backs.
Master class of an elite bench from the chest.
Country benches with back - from bar and foam blocks.
Benches for summer cottages - Shield opported for whole sidewall.
Simple drawing Cutting benches - in 15 minutes.
Cutter benches with curved side part.
Rack benchesfor giving - with a curved shape of the seat.
Bench benches with backrest and armrests - 23 models.
Benches under a canopy or classic pergola.

So let's be able to understand. And let's start with the easiest ways to make a summer bench with your own hands.

Model number 1.

Bench for dacha

From old chairs.

Here in the photo below we see the original and very simple bench - which is easy to make with your own hands from unnecessary chairs. Everyone at the cottage has old slim chairs. Once you left one chair in the rain, the lacquer coating was swollen on them, the soft upholstery had long mounted on the shaggy holes. Throw out a pity, you put it at the wall of the garage or in the Saraike - and he continues to wind. Then another friend's friend added to him - but he is still nothing, and you keep it on a summer veranda. And sometimes cutting chairs with a peasive leg you see at the entrance (someone delivered on the trash).

All these old men can give a new youth life. Paint them in a joyful juicy color. And cover with a wide board - to fasten into the screws (so that they keep behind the noise of the bottom of the chair, it can be strengthened with a wooden lining). Or fasten not to the bottom and to the chairs frame.

By the way, if you do not have old chairs - not trouble. Go to any site-flea market, - there is very part selling old chairs for the living pennies. They are joy that they sold. You happiness - what they found.

If wooden chairs will have a different seat height - it is easily solved by making legs to the high chairs (or stuffing on the frame of a low chair of an additional thick fortune to raise the seat at the desired height.)

Chairs can be connected not only in the zone of the seat - but also along their backs. Here on the step-by-step master class of manufacturing such a bench (photo below) we see how it is done:

Mounting nodes on the rear line of the seat - a long wooden plank.
Fastening nodes on the front line of the seat - screed screws (or just a bunch, which is kept due to the fact that the back plank does not give the chairs to disperse).

Select the side handrails benches. Drink corner Pazik On the handwheel, so that he entered the back of the stool.

Okrew the lacquer coating from the chairs (we prepare them to paint). Ground before painting - special primer for wood. We impregnate moisture-resistant coating.

And attention - add elements of strength. From the bottom and on top between the backs of the chairs - you feed short wooden planks-holders. They combine the backs of the chairs - into a single overall back of the country bench.

Cut the seat chamber. Please note that there are special square drives in it (so that the high "robes" of the legs of the chair passed through them.

Here we have the elegant garden bench. It can be put on the lawn of the garden in a place with a table - under a canopy, in the recreation area, on the veranda or terrass. And for the winter and the rainy season to enter the house.

But the idea of \u200b\u200bhow it is possible to place the chairs for our future bench for the cottage - with a rounding.

And you can make a round garden bench around your beloved tree or a lilac bush on your dacha - also from the chairs of the backrest.

Even if you found only 2 chairs on the flea market - you can do the original bench with them - which will only have you.

Moreover, one exclusive idea is still hiding here - just for two chairs.

Here in the photo below we see how exactly the two old chairs can make your own hands french bench-goat.

On the photo scheme below below, we see the master class - where it is shown as two backs from the chairs - become the side elements of the frame of the garden benches.

First do it quadrangular Frame for Seat (Light tree in the photo below) - Another scientific is called the Tsargi (frame elements under the chair, or under the tabletop of the table). You feed this CARD Frame to the lower straps of the chair back.
And then so that our bench does not shut there, and make an additional rama-tie Already at the bottom of the legs of the future bells. According to scientific, such a frame-screed at the bottom of the legs is called the Prede Frame.
Mobile All product is white and get a whole French bench for a beautiful holiday at the cottage.

If you wish, you can attach a back to such a garden shop-goat. Just beaten to the side surface of the chalk board. How it is done in the photo below.

Model number 2.

Country benches

From the old bed.

But ways to create a beautiful bench for giving using the backs from the old bed.

One back is poured as it is in half. Halves will be used as side elements of the country benches.

Even if the back of your bed is not made from a solid shield, but decorated with carved bassines - you can still make a bench according to this scheme.

Side can be covered with a solid wooden shield. Or wreating boards-slats as in the photo below.

The second back of bed can be used under the foot bench - From the facade edge. How it is done in the photo below. The bottom frame of the benches can be simply cooled by a edged plane board and paint. And you can cut one-piece shield and put it on top on the frame.

You can use only one back to create a bench.

You can make a fresh frame from the edged board under the dacha bench.

Or a frame for a seat - a CARG frame bench - can be taken from the same material as a skeleton frame of bed. How it is done in the photo below.

And pay attention. Here, part of the skeleton of the bed is stuffed from above - to increase the level of the seat.

Beautiful summer bench can be made even using modules from any other furniture. For example, from the old buffet. Suppose you have a buffet part of which is not subject to restoration (drunk guests fell and broke the line of drawers).

Then the fate itself suggests you from it an exclusive bench. It is unusual to beat the remaining part of the buffet. And create a cozy corner for family privacy.

And you will not want to set such a designer bench for rain. You will find her honorable place in your country house. And a blue pads with an embroidery of snow-white patterns for it.

Model number 3.

Shield garden benches

Do it yourself.

In order to immediately explain the term "shield". Sign by this simple design - a mini-shop from cutting kitchen boards. This is the classic shield design bench. That is, the product is collected from one-piece shields.

In the photo below the shields are connected by a groove manner. Board sidewindes in the grooves on legs-racks.

Here, the bench is made in the same way - the shield method. Only shield material is more rude and stove. And here they added a back - it was embedded in the grooves, chopped in the support panels.

Fastening the shields to each other may be a groove (as in the photo above) - where in some shields pubs are cut down, and other shields in the bottom enter. Such fasteners are used only in shields made from a solid piece of wood. The glued shields are not suitable for this - they can cut down in places of their gluing.
Also, additional fasteners are used for attachment - wooden(Tsargi, corner bodies, progs), metal (corners, brackets and perforated plates).

Rustic shops are made. 2 side shields (these are legs) - a long board is connected together (this is Prix). The board can be placed at the bottom of the cross, or at the top of the cross-line - immediately under the seat board. In the photo below, we see both of these ways to locate.

As you understood the shields you work with, the right shape should be required. It may be a wreckage of an old board whip - in which you cut out flat Lines Supports for Sitting and backs.

In the photo below, a solid shield plays the role of support and for the seat board and for the backrest board.

Here the same principle is a solid support for the seat and the backs of the country bench.

And this beautiful white bench for giving is made by the same principle. Only already from exactly bought shields and painted.

Here we see the shield model of the bench's bench, where already 2 shields play the role of support for the seat and backs.

And these support side panels are made at a slight angle of inclination. And so the bench got a seat with a slope of deep into and slightly thrown back. Very convenient to sit in such a bench.

And you agree to do, cut this bench with your own hands very easy. Here the drawing is not obliged to be accurate.Just do in your soul. Easy the angle of the nasklock of the sideways Choose an eye.

Side backrest - in the form of a long triangle (choose angle ourselves).
A foot support for the seat - in the form of an elongated trapezium (you can with a flap of or without).
Under the foot supports, a segment of a thick bar is drunk - so that the bench is height. But if you have a wide board, then the legs will turn out to be higher at the bench, then you can and without barous supports

All items can be placed on ordinary nails.

To the bench is not so low (If you wish) you can make the foot bars higher - to stick together several segments of the bar - put them on each other with a turret and fasten with the inside of the board (so that everything together) or without a board just on nails.

And also such a bench can be put on legs - also in the form of elongated trapezoids. Available from the inside of the sideways.

Shields for benches can be shot down (that is, not solid, but consisting of their boards closed with each other pericing plank). A simple dacha bench with a photo below just demonstrates this method.

And this garden bench made of thick boards is also done on the same principle.

Model number 4.

Cutting benches

Do it yourself to do in the country.

But another simple model of the country benches. She is not only easy to constructive - but also in the material. From one long edged board, you can make such a garden bench quickly and just with your own hands.

It can be supplemented with armrests, cover the noble dark vest, or paint bright juicy color.

From the side sides of the country's benches of this type, you can make a book under books, pivasik, those things with whom you love to relax in the country.

Let's look at the drawing of this country bench. We see that all corners of the planning of the board have a slope of 30 or 60 degrees. Dimensions in the drawing are indicated in inches. One inch is 2.54 cm.

We see the drawing from the side. The length of the back and seats - on your choice.

Cut the board to the segments we need. And we collect a bench on bolts, screws or nails.

To such a bench in the country, you can make a table for provisions. Or ordinary panel shop.

Model number 5.

Shield benches for giving

With a curved side shield.

Shields that you cut for the sidewalls of your Bench to the country can have smooth round lines. Then the bench can be a real work of art - your creative work.

The seat in such a bench holds on the planks stuffed under it from the inside of the sidewall.

The back rests down at the bottom - on the same bar as the seat, and at the top on the bar navigate vertically along the spin part of the curved sidewols.

Boards of which you cut out the curly sideline can be treated along the edge, giving it roundness and smoothness (left photo below).

And more curly sidewalls can be cut not from a regular shield And from a joinery with a terrain - the front part of the cabinet or an old viper door. Even the door handle can not be removed - but leave for beauty (on the right photo benches below).

Model number 6.

Cutting bench for cottage

How to make with your own hands.

And from carved sidewols, you can make an interesting rack of benches. They have a round seat with smooth outlines and a curved backrest line.

In the photo below, we see just such a convenient bench for giving.

The bench swelling is obtained due to the fact that narrow rails are fought on a bending perimeter of figured side parts.

In the photo below, we see a master class of manufacturing such a bench for giving. In order for the rails not beyond the weight of a sitting man - for such a bench, another skeleton figured element is made - by Entra. All three details are connected together into one common frame - just putting them on the slopes of the lower ridges (as in the photo below).

And then on this frame on its upper perimeter - stuff on the rails of the rails.

If you want such a bench is longer, then you just need to make not three curly models of the frame - and four, or five, or six. Well, of course, printed rails should also be long.

Model number 7.

Fast bench -

from foam blocks with cavity.

Foam blocks (or gas-silicate blocks) sometimes manufactured with through holes inside. This is done to save material and also to enhance the heat shielding properties of such a building material.

And we can use this "holey" feature of gas-silicate blocks - in the good purpose of creating a bench for the cottage.

To do this, we install 2 two rows of foam blocks down holes down, and put more foam blocks on the holes. And in these holes insert the suitable sections. To make it easier to sit upstairs, you can leave the pillow pillows. It is better to choose those that are covered with a waterproof cloth. Or sew themselves from the loaf and thick foam (sold in Khozmagach and Stroymagas).

You can simply score the cover from the boards into the solid one - so that the flat seat without holes it happens.

And the foam blocks are good to cover the usual paint - to get a bright beautiful bench.

These are the ideas for the manufacture of country benches with their own hands. But this is not all the models of wooden benches of which I would like to tell you. Therefore, wait for the continuation - we will make interesting benches from the tree (timber, boards and logs).

On this, your professional growth will not end ...

You will see how it is simple and quickly make a real structure with your own hands - a large summer gazebo. How to install pillars, like (without any building education) to make a roof, how to cover its roof (polycarbonate, slate, tile). Stay with our "family handy" - and we will give you "Golden Handles".

Successful to you dacha construction.

Olga Klishevskaya, especially for the site

If a you liked this article
And you want to thank for this painstaking work of our free author,
then you can send any sufficient amount
on the his personal Purse poison - 410012568032614

Bench - an integral attribute of the country area or the local area. Often there will be no place for one, but for several benches. One in the yard, the other in the garden, the third at the gate. Bench with your own hands - probably the easiest and most useful project that can be done in the country.

Beautiful wooden bench texture will look harmoniously in any garden, especially if used for a bench is not just boards, and all parts of the tree that are available to you in the garden.

In order to make a simple bench, do not need special skills or expensive tools and wood at the cottage - one of the most affordable materials.

If you have never done a bench, we will show the entire basic process, on the basis of which you can create your little masterpieces.

We hope these beautiful benches will inspire you to your own sample.

Bench with your own hands

To begin with, we offer to master the simple design, which is easy to make and which has good stiffness and stability.

Bench of wood. Preparation of materials

In order to make a bench, you will need:

2 short front supports [a];
2 Long rear supports (they will be attached to the back) [a];
8 short crossbars for the strapping of supports and giving hardness [b];
long board for seats and backs (their number depends on their width and the desired size of the bench) [C].

If you are planning to make a long bench with your own hands, then make sure your boards that you have prepared for the seat will not be fed under the weight of people sitting on it. And if the boards really begging, it can be corrected - you can assemble another support and put it in the middle.

Each item needs to be seized, so that after resting on the bench you did not have to pick up the spares from different interesting places.

Remember also that if you want to wear a bench, your supports should be at least 40cm longer.

Garden bench. Performance

After your details are cut in size and ground, you can start assembling. To do this, it is better to use a self-tapping screw, but if you do not have a screwdriver, the bench can be knocked down with nails.

It is important to screw the crossbars at least two screws to each support as shown in the picture. And the more distance between the self-drawing - the tougher there will be a design.

Now it remains only to paint and give paint to dry.

And that's what you can get. You can give a bench another species without changing the design. Just take more roughly treated wood, and it turns out a completely different thing! Although it is more constructively, its differences is minimal, and it is done in the same way.

Bench do it yourself

But even if it seemed to you too complicated, then for you there is a design of a bench with a back, which is made with a hacksaw and a hammer literally in a matter of hours.

All you need is six boards of the same thickness (preferably at least 40mm).

Its scheme is elementary simple.

After all the details are cut in size and polished, it is going in a few minutes!

Only holes under the self-tapping screw is better drilled in advance so that the board does not split when assembling.

It looks like a bench concisely and modern.
And it is not surprising, because there is nothing superfluous in this design. Each element of the design is absolutely necessary and at the same time - is minimally sufficient. Your backbone bench can be done in any way, we have shown only two easiest.

Photo benches

If you like working with a tree, you may want to expand your skills and add new original parts to your bench.

If you irrigate the stumps at the cottage - consider that you have become a happy owner of a unique material for the next one of your benches that you make your own hands.

Often, those of us who love and know how to do something with their own hands, just shy to spend their time on this "nonsense" - it is more important in time to accurate the garden.

The pleasure that you get when you work on your project bench for cottages, will deliver you really happy minutes.
And those surrounding, which are puffers, - why you are busy with a frivolous business, will be proud of your bench that you have done yourself, and everyone tells everyone that you are so unexpectedly talented.

And we are confident that these successes will inspire you to try new ventures, because the benches made by your own hands are always practical and more comfortable than ordinary standard.

Benches for summer cottages

One of the most necessary items in the country is an ordinary bench. The bench is nice to sit in a tank in a hot summer day or in the evening at the end of a working day. Shops offer a wide selection of parks, country benches, however, a number of difficulties arise here. First, the cost of such a product is quite high and may not arrange quality. And secondly, there is a problem with the delivery of the product to the country area.

All these problems are removed if you do bench for giving with your own hands. The main advantages in this case are the availability of materials for the manufacture, as well as the ability to construct a convenient configuration bench. Based on these tasks, a bench project is proposed for its cottage, which can be made independently. For this it will be enough 2 six meters. Cutting on a segment of a 1.5 meter length of them is quite simply possible to transport to the destination.

Get off the fortification boards to ensure sufficient reliability and strength of the bench. Given the finding of the streets on the street, in the back and the seat are made gaps to remove rainwater. Therefore, the overall width of the bench seats is forty centimeters, which provides a comfortable seat on it. The bias of the backrest at 18 ° is selected for better ergonomics. From the tools you will need a hacksaw, drill with tree drills, electric jigsaw, screwdriver (screwdriver) and fir-handled materials (square, pencil, roulette).

Dimensions for a wooden shop

We make a bench for cottages

To begin with, prepare the boards and the timing of the desired size. You need to have 5 half-one-e-boards, 2 boards 360 mm. And two - 52 cm., Which are then dug on 4 bars, which will be used to fix legs and seats. The legs and holder of the back will be two boards of 720 mm, on which sections are made. Sliced \u200b\u200bboards are overshoot to remove the burr. After removing the foam, you need to make the edges of the boards and a bar smooth. Before starting the installation of a country bench to extend the period of its service, wood is processed by an antiseptic. To give the desired shade, you can use a color antiseptic.

Scheme - drawing: bench with back

Installation of benches from boards Let's start with legs that interconnect the crossbars and self-drawing. Using the board and timber, to design a bench to the cottage, it is necessary to fit very carefully to the correct formation of the legs. It is from them that the stability of the structure itself depends. Blowing the legs into the ground can significantly improve the stability of the bench. As a leg, you can use hemp or log cabin. The junction of the bench is desirable to make wooden knaps (as shown in the video).

Self-tapping screws are used to attach seatboards and backs to the legs bench. With their insufficient length, it is necessary to make a hole exceeding the diameter of the screw of the self-press. Clamps are made on the back to make the fasteners invisible. Having determined the most convenient tilt of the back, fix with the help of the corners and plates of the stops by self-assembly.

Installation of bench backs

At the final stage, the feet of the feet of the bench benches are carried out by means of installing lower crossing. Protect the absorption of rain moisture to the legs will help the treatment of their mastic. For this, a bucket with a protective composition is heated on fire until the mastic becomes liquid. Turning the garden bench, the cluster is carefully treated with the legs over the entire surface. For complete drying, it is necessary to wait for one day and only then further processing is carried out.

The assembled product for protection against moisture is covered with a yacht varnish or special impregnation. Naturally, the lacquer looks like a lot better, but at the same time the lacquer becomes colder. A coating in one layer of the surface of the bench for giving makes her rough. To achieve a smooth, brilliant surface bench can, withstanding special technology.

At the same time, waiting, when the first layer of varnish is dry, the processing of the board with sandpaper and twice is covered with lacquer, after drying, you can use a bench.

Note! If you want to save time and purchase a finished product, we advise you to contact the company Cubistole. It is famous for the quality of the sold furniture, excellent service (fast delivery, assembly on delivery day, return opportunity) and low prices. There is a huge range of furniture for home and summer cottages, so every buyer will be able to choose furniture based on various criteria such as design, material, cost, etc.