Underwater LED flashlight with their own hands. How to choose a flashlight for underwater hunting underwater lamp for underwater hunting with your own hands

Despite the large range of products presented in stores, choose a good underwater flashlight is not so simple. Yes, and we did not translate more craftsmen who can make a lantern for underwater hunting with their own hands.

What are we going to do

We will make a powerful underwater lantern with a built-in battery for washing. He will not consume a lot of energy, and the total cost of its manufacture will be small. You will need:

battery. Well suited for these purposes uninterruptible battery SVEN 12V, 7 AH with dimensions 90 × 65 × 90. Its complete charge is enough for seven hours at maximum power without interruption;
case. For the case you need to buy a clutch for pipes with a diameter of 110 mm and a standard length in a plumbing store. We need a plastic plug for pipes and an adapter 110 by 50 mm;
halogen lamp;
wires;
wooden door handle.

Manufacturing process

In the coupling for pipes, that is, in the case for the lantern, put the battery, it enters it tightly. The length of the coupling and the battery is almost the same, improve the plug and adapter into the body, slightly.

For the tube of the adapter, the halogen sofit of 50 mm in diameter will ideally enter, it will be excellent protection for enhancing the direction of the light flux.

As a handle, we take an ordinary door wooden handle, thanks to the handle, the homemade underwater lamp will flood freely, and light the bottom. On the plug, make a foam thickness of 2.5 cm thick, it is necessary so that the lantern does not sneak.

Then all parts of the lantern glue with silicone sealant, cracking along the lamps to zamach the sealant too. To create a small angle, bend the lantern handle, it can be attached to the tape or come up with something else. For the power system, you need to move two wires that leave the housing with the battery charge wire.

Ultimately, it turns out a pretty good flashlight for underwater hunting. The weight of this original invention is practically imperceptible under water and therefore the hand will not get tired during long-term underwater hunting. The lantern has an excellent property to sail on their own handle up and at the same time it shines down, lighting with a reservoir depth.

Today we will find out how to make a homemade lantern for underwater hunting. The main tendency of underwater lamps is that they are equipped with power elements.

According to statistics today, two types of lights are the most popular lamps for underwater hunting, it is a lamp Magicshine and Ferei 152. The lanterns are made in the metal, have several luminescence modes (100% of light, 50% of light, 25% and stroboscope mode).

Lantern for underwater hunting differs from the type of filter . Many lanterns are sold with cold light (white - suitable more for the seas and oceans, for water having greater transparency) and warm light (yellow - suitable for rivers, muddy water).

There is a flashlight for underwater hunting and with a red glow. When buying a flashlight, pay attention to the halo of the glow, it can be more dense or have a central point of light.

A homemade lantern for underwater hunting is recommended to do after a thorough study of its features.
The dimensions of the lanterns vary from small to large. Little lights have a compartment for one battery, respectively, shine will be very weak (about 2 times less), they are well suited for a gun with a shifted handle. To change the color of light, various filters apply.

Lanterns are usually divided into two types: for beginners and professionals (high power). The difference between these species in the number of diodes. Lanterns with one diode in power do not exceed 1000. And a professional lantern for underwater hunting has several diodes (for example 3).

A homemade lamp for underwater hunting can be amateur, as it is very difficult to create your own hands.
You can increase the amount of work on the middle mode (2.5 hours) using several batteries connected together (two blocks of two batteries are connected in parallel). The sum of four batteries is about 14 amps. This device must be constantly under thorough observation.

The usual (native) battery due to the fact that the controller limits the discharge and the maximum charge until complete containers loses interest 5 from the total charge. At the stage of assembling 4 batteries with the controller, 10% of the total charge will be lost, if you do not remove the controller. Subsequently, the battery is complete. In time, it takes two times more than the charge of the usual battery (because we have not two, but four batteries). The work of such a battery will be at least 6 and no more than 8 hours (after about the 5th charge cycle, you can determine the exact time).

Because The resulting battery does not fully fit into the flashlight, you need to measure the size of the cover (from the clamping valve) for a specially turned insertion (removable addition). You can make a homemade lamp for underwater hunting, but for this you need to know the features and nuances of his work.

So, what you need to remember to choose a flashlight:

It must be maximally waterproof;
Eat less energy (big duration of work);
Look at the power of the light (must be high);
Durable, reliable design, protecting from germs and cracks;
The kit must include reliable batteries;
Convenience in control and fixation fortress.

All lanterns are attached differently. For example, there are lanterns that are fixed on hand, on the belt, and under the barrel. When choosing, check and the lace on which the lantern will hold. If you have a question about attaching a flashlight on, here is one of the ways how it can be done.

What will take:

Styrofoam;
;
sandpaper of different grainability;
rod mandrel;
Paint spray.

The first thing to be done will be a blank of foam. From the previously prepared piece, we cut a rectangle with a thickness of 55 mm, a height of 70 mm, a length of 550 mm.
In our resulting detail, we draw half-liters from both sides (where the thickness measure).

Next, we turn the Max to the emery paper. Stiffness and three on two sides of the foam approaching our marks. Apply the form you need using the second emery paper (try on the gun). Krees the resulting float with short pencils from a distance of 50 mm. Attach the lantern. Ready! Have a good hunting.

Homemade Lantern for Underwater Hunting Video

Every hunter knows exactly - the better equipment, the better the result of hunting. Immersing in the water, which is most often muddy, the hunter must have a lantern with him, the light of which will be able to break through the water. There are many factors that make it difficult to hunt under water, for example, algae and night time. However, not everyone, especially a beginner, the hunter can afford to acquire the non-cheap equipment. But you can make a flashlight with your own hands.

What are underwater lights?

First, consider which lanterns may be for underwater hunting. They are divided into several types: rechargeable on batteries that are not recharged (plus - work longer than battery, minus - as the light is discharged, the light will fill), xenon, LED and halogen. Have a submarine lantern for underwater hunting must be the following qualities - to be waterproof (which is the most important factor), have a durable case and construction (under water there is an increased pressure, therefore the body must be either metal or from impact-resistant plastic), well, and of course , Being ergonomic (very important in conditions of bad visibility to completely rely on the sensation - for this, the lantern must be conveniently placed in the palm of palm).

Lantern with their own hands

How can I make an underwater lamp with your own hands? In principle, this is not difficult, even more is interesting and exciting. It will be about a simple lantern running from the built-in battery. The peculiarity of our model will be that it will be able to swim on their own, without support, hold up. In this case, the lantern light will be directed down, which will allow good to see everything that happens around the hunter. So, first we will define that we need to work. For homemade needed: Uninterrupted battery (dimensions are played - 90x65x150), coupling for pipes 150 mm long and diameter 110 mm, plastic plug, adapter (from 110 per 50 mm), halogen sofit with a diameter of 50 mm, wooden handle from the door, Polyfoam, silicone sealant.

We begin to cray

First of all, it is worth a little to improve the coupling - the battery is almost the same with it in size, you need to accurately accommodate it there. In the adapter tube you need to insert sofit. In order for the underwater lamp to underwater hunting, it is necessary to glue the circle from the foam on the plug - it is important to strictly withstand 2.5 cm thick. The prepared parts of the lantern must be glued together so that the water does not get inside, it is worth using a silicone sealant, hacking them from the inside. The handle that must be wooden so that the homemade underwater lamp is well kept afloat, it is attached with the help of a tape (fasteners can be different). From the housing you need to display wires that will replace the inclusion system by simple closure.

What advantages of this model

Submarine lanterns made in this way have many advantages. The main is a small weight that does not give hands to get tired with a long use. The second obvious wealth is a small cost of all purchased parts. The horizontal position of the handle plays his positive role - the lantern at the same time seems to look a little down, directing the light at the corner of the bottom, it is almost impossible to notice it from the shore. Again, the absence of a power system that can fail to fail in any, the most undesirable moment. All items are easily replaced, and you can find them in any technician. The service life of a similar underwater lantern is quite long - if we take it from unspeaked blows and falls, such a lantern will last faith and the truth for quite a long time.

LED lantern

Underwater lights are not only on batteries, as mentioned above. The LED model is good because consumes a sufficiently small amount of energy, and also has a high brightness of the glow. Make such a lantern is also not very difficult. The work is required for work, consisting of eighteen superstar LEDs, controller, 4 Ni-MH battery, EC-LIGHT module 18. The body is made from a sheet of stainless steel, and the front and nuts that the glass will be recorded from the blanks. Plexiglas, eight millimeters thick, first put on the sealant, and then additionally tightened with nuts. You can also make on your own - a layout on paper is drawn, after it is transferred to an aluminum plate. In the outlined places, holes are burned (you need 250 LEDs - 10 groups of 25 pieces). Gercon and power fields replace the power button, the battery is used for power, whose charge is enough for seven hours. Underwater lamp for hunting ready.

What else do you need to know?

So, we know how to make an underwater lantern. What you need to know about them yet? It is necessary to discharge to the end before putting it again for charging. The underwater underwater lamp for hunting with improper recharging will lose energy. The exception is lithium batteries, but they are very expensive. When going away from civilization, it is worth stocking adapter through which you can connect the lantern to the car cigarette lighter. LED lamp will serve as long - it does not highlight so much heat as halogen or xenon. Batteries from cadmium and nickel are considered excellent in their characteristics - they allocate their prolonged charging and discharge cycle.

What qualities are still important for underwater lights

In addition to all of the above, underwater lights must have several more compulsory qualities. They should have a reliable fastening that will not be submitted if under water there will be a serious battle with caught fish. It is best for the fastening of the "crab" type - repeatedly tested not only in the underwater hunt, but also other types of hobbies.

The type of light emitters should be high quality, and the power of the light flux, selected individually for each hunter, should be quite productive. Cold LED light will give more brightness, and a warm shade will help better consider the contours of items. Much attention should be paid to optics - the blurred glass will not give the desired result. So, creating an underwater lantern, it is worth it with all the responsibility to take each stage - a small protector or inaccuracy can affect the entire work of the lantern as a whole. Also once again you can focus on the cost - the lantern bought in the store will cost at least seven thousand. While the lantern made by their own hands will require at least seven times less costs. It is difficult to argue that with high-quality equipment underwater hunting will be only joy, and your favorite occupation will bring any big victory in the underwater fights.

not so cheap. And besides, I like to do something useful with my own hands - this is very cool. Especially if it turned out a good and useful thing that serves as faithful.

I will tell you about simple in the manufacture of an underwater lantern with built-in tathers for the floor. This flashlight has a property to float on their own holding up and at the same time shine down, lighting your rise from the depth.

To make this lantern, you spend quite some of the money (about 600 rubles) on the battery, housing, halogen lamp and wires.

At first I take in the technician uninterrupted battery. In my case, it is SVEN 12V, 7 AH, dimensions of 90x65x150. The manufacturer is not important, we are only interested in dimensions.

For the housing I use a bought in Santekhmag for pipes diameter 110mm, length 150 (standard). Here tightly enters our battery. In the same place, I take a plastic plug for the same pipes and an adapter from 110 by 50 mm.

Since the length of the battery and couplings is almost the same, slightly improving it and it is for placing the plug, as well as an adapter.

The adapter tube is perfectly suitable halogen sophyte (showcase illuminator) with a diameter of 50 mm - it immediately serves as protection for amplifying the directionality of the light flux.

For the holding used the usual wooden handle of the door (this is desirable). A handle made of wood gives the so necessary positive buoyancy that helps our lamp freely pop up, illuminating the bottom. The handle gives it stability and at the same time helps to shine down under the angle necessary for us.

Our lamp for underwater hunting is slightly sinking, and to eliminate this by making sure the balancing, glue the circle of the polyfoam with a thickness of 2.5 cm (the size picked up an experienced way).

Next, I brought the part of the lantern with silicone sealant and smeared the slot along the lamp outside. Flashing knob in order to create a small angle.
Now it is convenient to keep it, the handle is strictly in a horizontal position and the lantern at the same time "looks" a little down. It does not give an observer "throwing" me from the shore + convenient to work with (I pop up on the beam of the lantern). The handle attached with a tape (you can come up differently).

It did not wise, coming up with the inclusion system, and simply resell two wires that come out of the housing with the battery charging.

The weight of the small invention is almost not taking under water, so the hand during the many hours of hunting does not get tired.

As a result, it turned out very nice The homemade lamp for the underwater hunt, the truth will need to be finalized. \u003d)

Successful to you underwater vigors!

For a submarine hunter, it is very important to choose the right gear: because it depends on how safe and comfortably it will be its stay in the aquatic environment.

A very important thing that needs to have with you during the dive of water to the water is a lantern. Without a properly chosen high-quality light, the hunter may vain make every effort on equipment to hunt under water.

In order to be able to hunt in muddy water, at night, in thick algae or at a depth of more than a few meters, the hunter needs a good lamp (for safety reasons, two).

Therefore, the choice of underwater lamp must be proceeding with full responsibility.

There are several types of lanterns for hunting under water that when choosing, it can make not only a newcomer, but also an experienced hunter, when switching to a new reservoir or when the old lantern breaks.

These devices are the following types:

rechargeable;
on non-rechargeable batteries (they will last longer battery, but the light will dump as they are discharged);
lED;
xenon;
halogen.

How to choose a lantern for underwater hunting in muddy water?

The lanterns that are used during the underwater hunt, have increased requirements, because under water, they, in fact, are the eyes of the hunter.

Therefore, when this device is selected, it is important to take into account the following characteristics:

Waterproof. This is the most important lantern parameter. Leading manufacturers of lamps make products, guided by the American standard IPX 8 (provides water resistance of the device when immersed up to 30 meters).
Durable construction which will be under loads in high pressure. The housing must be made of metal (expensive products) or from shockproof plastic (cheaper products).
Ergonomic.
The lantern should not be cumbersome and heavy, and thereby stance of the movement of the swimmer, because the reaction and mobility are important under water. The device must have a streamlined form, convenient control, harmoniously lie in the hand and not slip out of the wet glove.
There are both monoblock lights - this is the usual cylinder or boxing with a handle for holding and separate - only the searchlight will be in the hand, and the bag with batteries is attached to the hunter's belt. There are also lanterns that are fastened to the underwater rifle or a swimmer mask that are popular.
Reliable fastening. An uncomfortable lamp can be a significant hindrance when snorkeling with fish. Therefore, it is important that the lantern can be attached to the underwater equipment of the swimmer and had an insurance belt to the hand of the swimmer. One of the best fasteners is the "Crab" type mechanism.
Power capacitance and type of light emitters, which are installed on the lantern are required to provide for a long time without charging or changing batteries.
The power of the light flux of the lantern, Which is selected individually for every hunter and the style of hunting chosen. But do not underestimate low-power lights. In clear weather, such lanterns are suitable for additional illumination for a long time. A small capacity can also have a spare lamp.
Availability of various modes of operation. The lantern should have the ability of both continuous operation and impulse action. The advantage will be the presence of a radiation power regulator. Lan control elements are also important, their design should exclude spontaneous turning on and off.
High-quality optics. On branded lanterns installed a regulator that allows you to change the lighting sector. Also an excellent advantage will be able to change the light filter depending on the decor under water.

Rechargeable underwater lantern

In popularity, the rechargeable lamp is much superior to its competitor on batteries. After all, modern batteries have a good capacity and power, which allows the lantern for a long time.

Good batteries, from cadmium or nickel, have excellent characteristics and a large number of charging and discharge cycles.

But there are disadvantages of such lamps:

Such lanterns must be discharged to the end before charging. If this is not done, then its energy intensity will decline after each such recharging. The only exception is a lithium battery. This is the most modern battery that has a high capacity and high price.
With prolonged stay away from civilization, there may be no source of charging such lanterns. Solve this problem will help the adapter for connecting the lamp to the car's power grid through the cigarette lighter socket.

LED lantern

In view of the rare use of halogen lights due to their high energy consumption and small life, the main competition among the underwater lights according to their light radiation is carried out between LED and xenon lamps.

The operation of the LED flashlight is not associated with the allocation of such a number of heat, like halogen or xenon fellow. Therefore, these lights are not such capricious and have a high, compared to the rest of the diet.

LED lights are most often small or medium power. The power of the light flux of such lanterns can exceed the power of a conventional incandescent lamp, and at the same time, the lantern will consume electricity much less.

Xenon underwater lantern

When the hunters are needed a powerful light source for night hunting or for watery hunting, they use xenon lanterns for underwater hunting.

These devices give a directional and strong bundle of light rays with a capacity of 50-100 W and above.

Xenon lanterns also have small power consumption, which allows for a long time under water, but in their durability they are significantly inferior to LED.

Thanks to the more powerful directional beam of the light, the lantern will help you not only find prey, but also blinding some types of fish than deprive of their mobility and simplifies aiming.

Xenon lanterns are comfortable when hunting in a pair or group of people: it will help determine the location of the partner in muddy water or at night hunting, which is very important. Such a flashlight also provides security, allowing you to see what causes harm.

Many hunters consider the price to overestimately, and try to make them independently.

Best lamp for muddy water

Of course, it is impossible to specifically say what a lantern is the best, when hunting in muddy water. Certain advantages have xenon lanterns, but they are not suitable for all styles of underwater hunting.

Most often, the lantern is selected individually, perhaps experienced.

A high-quality lamp is a rather non-sophisticated device, and when you purchase it is necessary to take into account your capabilities and needs.

It is not worth buying very cheap lights of unknown firms - they will not last long and can contribute to the fact that your rest will be spoiled.

Mares;
Omer;
Light
TECHNISUB;
Intova.

Underwater lamp do it yourself

Despite the fact that the stores represent a wide range of lamps for underwater hunting, always enough folk craftsmen who want to make it with their own hands.

There are two options for creating an underwater lamp:

Take a plain flashlight and create a shell for him, Impermeable to water, or independently seal its body.
Make a lantern from scratch. To do this, it will be necessary: \u200b\u200ba housing (often used plumbing pipes with a diameter of 110 mm), battery, light source (reflector with LEDs, xenon or halogen lamp), wires for connecting a lamp with a battery and fixtures for convenient holding homemade lamp.

Relying on the characteristics, features and requirements described above, you can allocate specific individual requirements for the characteristics of the flashlight for underwater hunting in muddy water.

After studying specific models and relying on your own preferences, it is necessary to choose exactly the lantern that will satisfy all the requirements and wishes, and will also provide not only the pleasure of the underwater hunting process, but also a reward in the form of a catch.