Metal shelves in the garage. How to make comfortable shelves and racks for the garage with their own trees and metal. We define with the design

Garage - Universal place in which you can not only place your car, but keep various things used in the farm. The correct organization of storage in the garage will help save space using it at its discretion. The best solution will be homemade shelves and racks in the garage with their own hands.

In this article you will learn what material is best to do in the garage, what kind of types there are.

Racks for the garage are made mainly from metal and rustic. Also, racks are collapsible and unintended. Stationary fasten with the help of self-tapping and nails.

Also, in the garage premises, not very favorable conditions for wooden shelves are created - low temperatures, humidity, sharp temperature differences.

In order to protect the tree from damage, you need to handle it, and then dry. To fasten the shelves and the rack itself, plates or metal corners are used using self-tapping screws.

The cheaper option for creating a rack in the garage is plywood and board. Laminated is much more expensive, it does not need to be painted and processing protective substances. The only one on the side sections that remain open should be applied silicone, to avoid moisture.

Garage Metal Rack Frame

To create a rack frame, needed:

metal corners with a thickness of 3-4 mm;
pipe from a profile with a rectangular cross section.

The racks are made of profiled pipe, and crossbars from the corners. Metal thickness is 2-3 mm, the width of the shelf - 25 mm and more. Turn the corner in such a way that the flooring was in the recess. Flooring on the shelves Mastery of plywood, boards, chipboard ,. Board, Plywood, OSP, chipboard.

First of all, the side elements are collected, after fixing the cross.

Also a good way to build racks in the garage are crab systems. These are metal plates with special recesses for the profile. In the grooves insert pipes, then the plates are tightened by bolts M6 or M8.

Under them, first drill holes with a thin drill, then expand thick. Such structures are designed for a small weight. There is another way - special crab systems. These are metal plates with molded recesses. Pipes are laid in the grooves, then two plates are tightened by bolts.

Types of garage racks

Collected Racks are going and disassembled independently.
Stationary Mount to the wall "tight"
Mobile - You can move from place to place.
Torch Use for small items (bolts, screws, nails, nuts, keys, screwdrivers, small hand tools).

How to make a rack in the garage

In order to make the rack in the garage with your own hands, you must first create a project, measure the room, decide on the size. Calculate the required number of shelves and their depth.

The best solution is the rack full length and height of the free wall.

Width Shelves about 1m. This is the most optimal option to place bulk and heavy items.

Depth - Approximately 50-60 cm. There is no need to do anymore, otherwise it will be difficult to reach the right things.

Height Shelves - within 25-60 cm, the lower should be the highest (for large items).

Collect the rack is needed horizontally, and only then raise.

Reading time ≈ 12 minutes

The original shelves in the garage made by their own hands are presented today with many options and examples with photos. They can become a decoration of the room, as well as a safe place to store automotive equipment, details and tools. You can make it easier to make it yourself, developing your own design, taking into account the desired size and functional.

Frame shelves for tires and tools

Functional storage system in the garage

It is accepted not only to store and maintain a car, but you can also find a mass of places to install shelves and racks. Therefore, today there are many options for various designs that differ in material, form, configuration, size and design.

They should be:

Durable;
Reliable;
Compact;
Necromozda;
Durable;
Functional.

Installation of suspended shelves, built-in boxes and modular structures will help bring order in the garage and free up the space from the impressive number of accumulated trash in the passage with the tool.

Neat location of things in the garage

What is needed by a shelf racking system in the garage room:

The shelves are made with their own hands are an excellent option to create any design in the photo, schemes and drawings. The main thing is that the room itself is clean, spacious, well-equipped and freed from unnecessary trash. What is best to organize this space:

Where can I install the shelf storage systems:

On the longest on the entrance of the wall;
If the room is large, the side walls can be used;
In the interporal space and directly above the vehicle.

Each motorist should remember that all storage facilities should occupy no more than 20% of the total ingenuity space.

Optimal organization of storage system - 1. Open brackets and hooks, 2. Rack for tools, 3. Shelves for spare parts and wheels, 4. Rack for large tools, 5. Cabinets, 6. workbench

Types of designs

Everything can be stored in the garage: from car accessories to carpentry tools and other little things. All the details that did not have enough space in the storage room and on the mezzanine should be neatly folded or placed on wall shelves or stationary racks.

By type of construction assembly, there may be the following types:

Special attention should be paid to the shelves intended for spare parts of the car, namely rubber tires and wheels. This design is:

Specialists advise to store tires near the ceiling space on the upper tiers, so as not to clutter the garage room. To free the useful area, you can mount the rack at once with several shelves. Some suspended the wheels on the wall itself, hooking behind the screwed fixator.

Folding corner shelves for seasonal storage tires

By material distinguish:

When developing storage systems, the dimensions of the garage room, the purpose and functionality of all installed shelves should be taken into account.

According to the method of fastening the design there are:

How to make original stable shelves in the garage with your own hands, is shown on the video with step-by-step instructions from the master.

If you have gathered yourself to make garage shelves and racks, chose material and place, it's time to mark the markup with all sizes.

The assembly stages of any design look like this:

Why is it better to assemble the design yourself, and not acquire a ready-made kit on the construction market:

When creating products, you can develop a unique design and make a design according to individual parameters. Under all the rules and clear consequences of the instructions of the masters, the shelves and racks are attractive and practical. The assembly process is shown in detail on the video below.

Shelf shield under the tools do it yourself

This product is undoubtedly useful in the farm, as well as for conducting pressure boards and repair work in the garage. A special shield will serve as a storage location and fixation of the essentials and small tools. The installation height is selected in accordance with the growth of the owner itself to increase comfort in use.

What will be required for assembly on their own:

Plywood board or chipboard thick up to 2 centimeters;
Shelves;
Anchors for fixing the entire design;
Brackets to fix the product on the wall;
Electric jigsaw;
Drill;
Building level;
Roulette for measurements;
Perforator with nozzle and drills to do the holes;
Hooks for fastening tools and details;
Set of screws.

Option manufacturer shelves-shield

Production Stages:

The last step will be done by a perforator of the holes in which you want to drive all anchor. If the installation of the shelf on the wall is performed successfully, it is time to place and spend all the details, as was conceived by plan.

Garage shelf for wheels

Tires on such a design can be stored by installing on the edge. At the same time, the shelf itself must be fixed upwards so that the fasteners of the wheel kept the wheels.

With the anech, the attachments of the triangular shape are fixed;
The level of line can be checked by the level, and the distance between the side mounts to measure the ruler (it should be 50 or 100 centimeters);
So that the shelf does not fall under the weight of the tires, the thick and long dies should be selected. The design is fixed from above, after which the surface can be painted in any color (in our case in white) and give the product well to dry.

On a similar holder will be able to fit from two to four wheels, it all depends on the selected parameters and individual preferences.

Homemade shelf for seasonal storage of tires or tools

Additional devices

In addition to storage systems for tools, domestic workshop and automotive parts, additional amenities can be in the garage. Among nor can be noted:

Shelves in a garage of a practical tree or durable metal made by their own hands according to the drawings and schemes with photo examples will become a real decoration of the room. After all, sometimes from a pair of oak boards and submitted means you can create a real masterpiece that affects imagination. The construction of a solid rack is shown on the video master class with step-by-step instructions.

Consider how do it yourself make the shelves in the garage for storing the necessary auxiliary equipment on them and a variety of car care tools.

Garage racks - the wealth of the choice of structures

The shelves in the garage make it possible to compactly place on a limited area a lot of details and tools for servicing the vehicle, as well as a different household SCARB, which did not find a place in the apartment. For this reason, every motorist establishes in the "House for Auto" racks. They provide order in the garage and allow you to find the desired thing in seconds.

You can equip the hangar for the car by the shelves. Such designs today are sold for every taste. But even very expensive and "tricky" racks will not always be satisfied with your individual queries. It is much wiser to make shelves in the garage with your own hands, choosing the best sizes of such structures.

By optional installation racks for car boxes are divided into such groups:

collapsible;
stationary;
mobile;
hinged;
rotating.

Collapsible shelves can be mounted anywhere in the garage, change in the event of the need for their location, width, height and layout. Stationary structures are created for installation on a particular area of \u200b\u200bthe room. They are put once and forever, fixing to the ceiling, wall or outdoor surface. According to strength indicators, stationary racks are more reliable than collapsible.

Mobile type designs are equipped with rollers that allow them to move them throughout the garage. In essence, they are a small cart. It's comfortable. But it is worth understanding that such racks are not able to withstand too high loads. Therefore, they cannot be stored bulky and massive equipment.

Hinged shelves are equipped at home rarely. They must be swallowed and fixed directly under the ceiling surface, which can cause serious difficulties. Although theoretically, it is quite possible. Radish phenomenon can also be considered rotating structures. Visually, they look like racks for CD discs. On such mini-racks, you can store all things - screwdrivers, keys, for a larger tool they are not suitable.

The number of shelves on racks and their geometric dimensions you have to choose yourself. Professionals are advised to design a garage design so that all tools used tools are placed on the shelves. In other words, the racks are advisable to do spacious.

The most popular materials for the manufacture of garage shelves are metal and wood. If you plan to set the design for a long time, it is better to use metal products that differ in durability and maximum strength. If you wish to save on materials and not tighten the mounting work, make the rack in the garage with your own trees. Work with easier wood is very simpler than with metal.

Also, shelves are made from plastic these days (they can be bought in the store) and combined - made of steel and wood or plastic and metal.

Like any relatively complicated product, the rack must first develop on paper. This can be done with the help of ready-made drawings. Schedule and independently make a sketch of the future design, specifying the parameters of the shelves. In this case, the rack will be perfect for your garage.

It is usually recommended to place a rack along a single wall of the room. The optimal height of the structure is from the floor to the ceiling itself (no square centimeter of the free square lose not to any motorist). Of course, if your garage is very high, the shelves can be done not to the ceiling surface, so as not to suffer with climbing on the stairs to the very top for some detail.

Bottom shelves always make more spacious and high. They are designed to store wheels, large tools. Shelves, which are located at the top of the design, it is better to make low. On them you will store all easy trifles. Thus, you will ensure good stability of the rack.

At the bottom, it is imperative to leave the lumen of 15-20 cm between the design and floor covering.

He will give you the opportunity to fit the floor under the rack without difficulty. In addition, the pros is advised to drill in the shelves for the instrument, canister, the wheels are small holes. They will perform the function of natural ventilation for stored objects, which protects them from rusting, and will also allow you to fit small garbage and dust without problems.

The length of the shelving is usually also done on the entire width of the wall, leaving about 8-10 cm free space over the sides of the structure. So you will be easier to carry out installation work. Choose the depth of the shelves themselves. At the same time, remember that too narrow niches are not suitable for storing a large-sized tool, and excessively deep uncomfortable in operation (trying to get anything with a shelf with a depth of meter). Recommended depth of niche garage racks - approximately 60 cm.

The most common width of the shelves (refers to the distance between two vertical structural supports) is 100 cm. You can make a width and 30-50 cm, more if the shelf is designed to store overall (for example, wheels) or heavy metal products.

Making a metal shelving with wood shelves

The popular version of the arrangement of garages is a design with a metal frame (it will stand without exaggeration with decades) and wooden shelves. You can make vertical racks such racks from rectangular profiles with dimensions of one side of 4-5 cm or from angle with a shelf 3-5 cm.

The frame itself is made from an angle with a 1.5-2.5-centimeter shelf and is screwed to the vertical guides or welded to them. The welded compound keeps the design as much as possible, perform it faster and easier. With breast bolts, but you get the opportunity if necessary, change the height of the shelves of the rack.

The shelves are made of 1.5-2.5 cm boards. In this case, they will truly durable. You can make them from the usual or laminated plywood or chipboard. Wooden shelves before installation are necessarily protected from moisture and fungus - rolled and stained.

Thus, the preparation circuit components for the rack, and then their assembly and installation looks like this:

Bulgarian cut on the specified dimensions metal blanks.
We place the position of the racks vertically and immediately note the place where the shelves will be recorded.
Weld (take the bolts) corners (here it is important to control the horizontal of the location of the elements).
We apply primer on the frame and stain in its corrosion-resistant composition.
Cut the shelf of wood and "try on" them, putting across the frame. You can perform the installation of boards and along, but in this case they can under the weight of large tools and spare parts to fake.
We mean (paint) wooden products and secure them with a metal frame. It is advisable to customize the boards to each other as close as possible.

The rack is ready. If you are not quite confident in the high stability of the structure, you can additionally attach it to the wall of the garage with steel brackets.

Wooden rack - everything is very simple

The garage shelves made from wood are cheaper. In addition, they are easier to do and install. Therefore, many car owners decide to acquire precisely such structures. Here, however, it is worth remembering that wooden racks are operated in time less than metallic or combined.

Optimally, when the shelves are made of solid wood, for example, from oak. But pine boards are completely suitable - inexpensive and affordable. It is important that they be well dried, did not have large cracks and bitch, deep wormwort and mold traces.

Racks (vertical) are made from a bar 10x5 or 10x10 cm, the shelves are made of chipboard or ordinary boards, cross-bruises - from a smaller cross-section or even from the boards (but their thickness should be impressive).

We cut the boards and bars on the specified dimensions, process them with an antiseptic composition.
We collect the design using for the connection of individual parts of the eyelashes, spikes, wood for wood or self-tapping screw.
Sockets of parts to give the design of a larger area are enhanced by metal corners.
Strace the finished rack (the ends are preferably painted in several layers).

In about similar way, you can make designs for a metal garage. But, of course, cut on the desired size and mount heavy racks, as well as other elements of the rack you will be much more complicated.

For car enthusiasts, the garage is often becoming the second home. In addition to the main purpose - car storage, the garage is used to repair the machine, and for repairing tools and household appliances, and for other purposes. Here are usually unnecessary things, old furniture, which is sorry to throw away, some household appliances that need to repair, old bicycles and even inflatable boats of fishing lovers. The list stored in the garage of the trash in each of their own, however, over time, its quantity is usually increasing and greatly difficult to us.

Why do you need garage racks

Among the main reasons to establish the racks in the garage we note the following:

First, it is difficult to arrive at arrival and car travel.
Secondly, in the accumulation of old things it is difficult to find the necessary tools, get to the currently necessary parts.
Thirdly, the aesthetics of the type of such a garage leaves much to be desired, in addition, such a chaos in the room is pretty acting on the nerves and takes a bunch of time.
Fourthly, the danger of a fire increases in the gross garage, and it will be much more difficult to cope with the inflammation, because combustible substances are usually stored in the garage: gasoline, oil.

Of course there are exceptions. Some garage owners manage to keep them in an ideal order, where everything is decomposed on the shelves, walked on hooks, sorted by appointment. If you paid attention to such premises, racks are usually installed along the walls on which all the contents of the garage are decomposed.

Tip! The garage is not a museum and not an exhibition, and the absolute order on the shelves does not always correspond to the state of the human soul. The main advantage of racks in the garage is the convenience and comfort of work, it allows you to perfectly navigate in your reserves and folded objects. In addition, it is imperative in the garage rack for storing tires.

As practice shows, the rack remains the best option for storing tools, spare parts and the rest of the garage inventory. It has sufficient capacity, does not occupy a lot of space, open access to shelving shelves allows you to quickly find the right item. The rack will be conveniently stored both large-sized parts, and sufficiently heavy items.

If you decide to streamline the contents of the garage, the rack will greatly facilitate the guidance of order. And to figure out what is most suitable for your garage, you need to familiarize yourself with possible options.

Conditionally from the available types of racks distinguish:

stationary;
prefabricated;
mobile;
rotating.

Stationary design is installed in the garage at a permanent place, for greater stability, it can be fixed to the wall, usually done in unimboring. The advantages of such a scheme include high strength and the possibility of placing the most difficult items and tools. It is made of durable wear-resistant materials and with ease will withstand operation for several decades.

Most often on sale there are prefabricated metal racks for the garage. They are made from perforated metal struts to which horizontal shelves are attached. Usually they are sold unchanged, with a set of necessary fixings. The assembly of such an option is quite accessible to each, even non-own special repair skills. The advantages include the fact that the height of the shelves can be changed depending on your needs. Thus, you can fold for storage and set of spare rubber, and large-sized tools.

Mobile options have small wheels, thanks to which you can move the entire set of tools on the garage, and if necessary, even roll out of it. The advantage of such a design is its mobility, the ability to easily rearrange in the garage from one point of the garage to another, without unloading its contents, as well as rolling up all the necessary tools to the place of repair. But its carrying capacity is inferior to an unbearable version. Such a rack is also sold in a disassembled form, it is assembled using a screwdriver directly in the garage as a designer.

The rotating rack can be purchased for storing lightly small-sized tools and parts, as well as nails, bolts, screws and other smallers. It has small sizes, but you will easily find the desired detail, turning the rack around the axis of rotation. At the same time, it is possible to free the place on a large rack for massive items.

If you wish, you can not buy a ready-made rack for the garage, but to make it with your own hands.

Before buying or making a rack, you need to decide what place in the garage you can allocate it. It is best to place it along one of the walls, it is possible for the entire length of the wall. The height is limited to the height of the ceiling in the garage, and the width is determined by your needs. It is advisable to leave the distance between the rack and the machine at least 80cm to have free access to the shelves, as well as to protect the car from a possible fall from the shelves of heavy items.

In addition to the sizes, decide on the alleged load on the design, consider that you will fold on it. It may be necessary for the convenience of placement of the tools, there will be no one, but two racks from opposite walls, or one solid stationary and one mobile. All this is determined from the point of view of convenience, depends on the kind of work performed in the garage, and for what additional goals are used.

The rack for the garage is easy to make it yourself. If you have not been involved in such things before, it will be a good practice.

How to make a rack for a garage with your own hands

Before the construction you need to decide on the size of the product and make a drawing indicating the size. The length of the shelving depends on the length of the wall or from your needs. The height is limited to the height of the ceiling in the garage.

The width of the shelves, that is, the distance between vertical racks is usually done about 1 meter, if necessary, it can be increased to 1,5 meters, not more, as it will reduce the strength of the shelves.

The depth of the shelves usually varies from 30 to 60 cm, depending on your individual preferences. The height of the shelves can be different, for example, the most upper shelf can be made about 30cm for storing small and non-heavy items. Middle shelves - up to 60cm high, and the height of the bottom to zoom up to the 1meter to fit large things and heavy spare parts.

For the construction of the rack, it is better to use strong and reliable materials that can withstand large mechanical loads so that they will serve as a maximum of years.

Tools for making a metal shelving with wooden shelves:

ruler, level, roulette;
bulgarian;
welding machine;
construction pencil;
hand saw;
painting brush;
drill, hammer, screwdriver, pliers.

To build a set of racks, you will need to purchase metal for racks (metal barbell or pipe), metal corners, shelves or thick fane (chipboard), with heels of electrodes for electric welding, primer for metal and paint, dowel and brackets (if you plan to fix the rack to wall).

Getting to work

Oddly enough, but the most difficult thing in the manufacture of racks for the garage is planning and detailed thinking - where and how tools, spare parts, paints and varnishes, old junk should be placed, so that everything is at hand and does not bother work.

For the manufacture of racks in the garage we will adhere to the approximate order of work:

Grindka cut the metal on the required segments specified in the drawing.
On vertical racks, mark the places of fastening the shelves.
On vertical supports with welding welding metal corners. Before brewing the corners, you need to make sure that the symmetry of their location in the neighboring racks so that the shelves do not turn out to be inclined.
After the metal base is welded, it is necessary to predict it well, and then paint to protect against rust.
In size, shelves cut wooden boards, you can make the shelves from the board, plywood or OSB.
So that the rack is more stable, the vertical racks are fixed to the wall of the garage.

Important ! When making racks, leave a maximum of the ability to alterars and modify the design. Probably tomorrow, or in the near future you will have new ideas, and it is a pity that will cut the tightly welded or concreted frame and shelves of the rack.

It is even easier to collect wooden racks in the garage. To install them, it is necessary to concrete into the floor and the wall of the corner No. 50 and a height of 10-15 cm. The carrier structure itself is made from a bar 75-100mm. If the bottom shelf is chosen into size by 70% of the car tire diameter, such a design can be used in the garage as a rack for the wheels.

In order for the "good" in the garage, it is not difficult to move in some way to organize its storage. The most comfortable racks for the garage. In the presence of sufficient space, they can be made on the entire wall or even a few walls. If there is no place at the bottom, you will have to move upstairs - make shelves under the ceiling. Not the best option, but sometimes the only one. And yet racks in the garage standing on the floor are safer, especially if they are securely attached to the wall (in order to avoid unpleasant situations).

What rack is better: welded or bolted

The racks for the garage are made of wood and metal. Wooden most unimprovable - on nails and self-drawing. They are usually installed stationary, fixed to the wall. Metal racks can be cooked. Then they are intimidrate. There are racks on bolted connections. These designs are mobile, if necessary, if necessary. Their disadvantage is insufficient stiffness, since there is always some backlash in such a connection. To make the design more stable, it is fixed to the walls. To do this, the metal plates with a hole can be welded to extreme racks (attaching bolts). In this hole, drive the crutch (a slightly smaller diameter in the wall is pre-installed in the wall).

One of the options - the frame from the profile pipe and plywood shelves

And welded, and bolted racks for the garage are serviced, but more often there are welded structures. The collapsible option is chosen in two cases. The first - it will be possible to move to another garage and all the equipment will need to be transported, and weigh the design hundreds of kilograms, so it is entirely to move it problematic. The second is no possibility or desire to use welding (if the racks for the garage do it yourself). The rest usually prefer the welded - they are more stable and in the presence of the experience of welding going faster.

Metal racks from perforated corners are still on sale. They are also mobile and can understand, but they are connected with hooks (on crossbar) and grooves (on racks). Such storage systems are convenient - you can rearrange the shelves to the desired height. Their minus is expensive.

Designs and sizes

Constructive racks for the garage consist of racks, crossbars and shelves. Sometimes, to increase stiffness, there are still transverse tightening on the back of the back - two steel strips, welded / screwed to extreme racks diagonally. They compensate for lateral loads increasing public stability and reliability.

Dimensions - the height and depth of the shelves - are selected virtually arbitrarily - depending on what you intend to store. The only thing to pick up neatly - the length of the span is the distance between the racks in one section. It depends on the stiffness of the material that you decide to use: the shelves even at full load should not be fed. For heavy things / items, the length of the span is about 1.5 meters, if the load is not too big, the distance can be increased to 2 meters, but it is no longer possible to do more. If you need a rack for a garage of greater length, they put an intermediate rack, the distance between which can still be more than 2 meters.

A few words about the height of the shelves in the rack. The lowest shelf can be raised from the floor level by 50-70 cm (even more if desired). This usually put the most difficult items. The remaining shelves can be made at different heights, 30 cm is inconvenient and impractical. In general, a 1.5 liter plastic bottle should become optimally on the shelf, and this is 35-37 cm. Such a distance is convenient for use.

What makes

As already said, racks for the garage are made of wood and metal. Wood easier by weight, with wood it is easier to work, but they are withstanding not such heavy loads. Metal is heavier (heavier is heavier), but they can be put on both an elephant.

There is another question price. Metal rolls are not at all supreme. If you buy everything in the market or in the store, at the price of you one rack (along with consumables) will cost almost the same amount as ready. The only real way to save is to buy metal on metal supplies with whole whips (there are 6 m and 12 m), and then cut into segments of the desired length. Cutting can be right on the database, you will have to additionally pay for services, but the amounts are very small. In this case, you will be able to reduce costs by about 20-30%.

Timber in comparison with the metal are less. But do not think that costs will be small: you will have to buy varietal wood without bitch, and this is the class "elite" or "premium" with the corresponding price tag. So it will not work very cheaply.

From wood

The operating conditions in the garage are far from the best - elevated humidity, frost, alternate size / freezing, sometimes heat. Not very good for wood. Therefore, all the material before work must be treated with antibacterial and protective compositions. Take products for wood for outdoor work, as the conditions in the unheated garage are more similar to them. You can pick up such a means that simultaneously ties the treated surface and your product can not be painted. After processing, the materials are dried and only after that begin work.

When connecting parts of a wooden shelving, you can use standard methods for carpenters - in a quarter or in full. If this is difficult for you, you can navigate and jack, and to enhance the compounds to use metal corners and / or overhead plates.

Another time: to connect better on the nails, and not on the self-tapping screw. It turns out more steadily, less compound is "clench." If you have chosen the option with the amplification of the plates, they can be attached to the screws.

Now in size: for racks usually use a 50 * 50 mm for racks, the same bar can be used for the crossbar or slightly thinner - 50 * 30 mm. Flooring make from:

boards with a thickness of at least 21 mm;
moisture-resistant plywood thickness from 10 mm;

The cheapest is the board and plywood. Laminated chipboard is significantly more expensive, but it is not necessary to paint, and this is a good plus. In order not to spend a lot, you can take the first and last sheets in the base - they scratched and go much cheaper.

Wooden rack in the garage - drawing with dimensions

Another moment: the shelves from the chipboard remains open side cut. If it is not necessary to process it, with increasing moisture, the chips will swell, the shelf will become brewing. So that this does not happen, wake the edges with silicone. With such a treatment, nothing with chipboard will not happen.

Metal

If you decide to make metal racks for the garage, the choice of materials is wider - there are two options for metal, plus standard solutions for storage rooms (perforated corners). You can also use metal parts intended for other purposes - for example, steel cable racks or cable channels are used, which are used in connection.

Channels and shelves - convenient and not very expensive

So what makes the frame of a metal rack in the garage:

Metal corner with metal thickness from 3-4 mm. Width of the shelf corner - 25-45 cm - depending on the planned loads. Durable, but metal material, weighs a lot, it is expensive.
Profile tube (rectangular in cross section). With less solid componence (the wall thickness is less), compared with the metal corner has the best characteristics of elasticity (it is difficult to bend), more resistant torsion. Approximate dimensions for racks 50 * 50 mm or 40 * 40 mm, on the crossbar 50 * 25 mm or 40 * 25 mm, respectively.
Racks make out of proftrub, and crossbars from the corner. Metal thickness is 2-3 mm, the width of the shelf - 25 mm and more. Deploy the corner so that the stacked flooring was like in the "nest".

The flooring on the shelves are made from the same materials as for a wooden shelving (board, plywood, OSP, chipboard), only sometimes non-standard options are added, which with a wooden frame is used dramatically due to high mass - sheet metal.

The board is optimal for most regions - a reliable, not very expensive material. You need to take sex, without bitch (with a minimum of bitch) with a thickness of 21 mm. Treat antiseptics, then paint.

Plus metal shelves - high reliability at low thickness, minuses - price, weight and "volume". They also need to be painted, only first clean from rust, then walk the rust converter and the soil, then dye and preferably in two layers. Also, by the way, it is necessary to process and metal framework. Then the rack in the garage will not rust.

Features of the assembly of metal racks

Metal racks can be welded or collected on the bolts. With welding usually no questions arise. If you are using a corner, you can connect the Vansel - a difference of 3-5 mm when laying the shelves is invisible. If you wish, you can cut more superfluous in one of the shelves, cook the jack, but the trimming takes a lot of time, and you will not see much difference.

With the assembly of the frame for the rack on the bolts, the order of this: first the sides of the sides and shelves are collected separately, then they are twisted together. For each compound, it is preferably at least two bolts - for greater stiffness (less peeling).

If they are going to make racks for the garage from the profile pipe, the order of operation is different. First collect sidewalls, short cross-shirts are fixed. Two rectangles with crossbars are obtained. Then they are connected by crossings.

How can I make connections look in the photo. In one case, the welding is still needed - to privar "Note", in the other you can do without it - cut the "ears", bend and cling for them.

There is another way - special crab systems. These are metal plates with molded recesses. Pipes are laid in the grooves, then two plates are tightened by bolts.

Very long loads such a connection is unlikely to endure, but there are indisputable plus - it is not necessary to drill a bunch of holes in the metal. In the profiled pipe, this is definitely easier than in a thick-walled corner, but still takes a lot of time and effort.

By the way, the bolts are used M8 or M6, respectively, they require large holes. It is easier to first drill a thin drill, then expand to the desired size to thick. But even with this order, you need a solid amount of drills. So that they overheat less and less closely, next to the jar with water, lower the drill periodically.

Layout, schemes, drawings, ideas

In the garage, not only the rack is needed, but you still need a workbench and a stand for a hand tool - all sorts of keys and other smallers, which is much and invent some kind of certain convenient storage location.

The workbench can be made in the center of the rack. It is convenient - everything you need will be at hand, you do not have to constantly go to the shelves.

The workbench can be part of the system, and you can make two separate modules, between which you set the desired table. If this location does not like it, it will be possible to change the configuration - even though put an angle.

As for the bench for the tool. There is a factory option - a perforated metal sheet with holders hanging on it. The idea is very good with the exception of the price.

As usual, there are several homemade (what kind of garage without them) on the same topic. Ideas are easy to perform, maybe not so elegant, but comfortable:

And if you wish, all this can be put on the wheels - make a stand for a mobile tool. This is the case if in the warm season you prefer to work with the car on the street.

Well, for inspiration ... so that all the tools are in place at all))