Frame house 6x8 projects with fuel. Frame houses with boiler room. Projects of houses with boiler house from "Bruce Technologies"

The furnace heating introduces its own adjustments to the architecture of the house - professionals begin to design a building from choosing a type of homemade hearth and a place for its construction. The project of the house with a Russian oven is always different from the project, in which the main role is played by the "Swedish" or a modern cast-iron convection oven. The main task of the designer is to correctly determine the installation site of the heating device and plan the accommodation of the rooms so that in each room it was warm and dry.

Features of the design of housing with furnace heating

The furnace heating, which does not provide for water circuit, will be effective only if the furnace becomes the center of all adjacent rooms. To achieve this, the home focus is installed in the simple room between the rooms, and the firebox is displayed in the corridor or in the kitchen.

One hearth for four isolated rooms

Some architects offer another version of solving the problem - the installation of two and even three foci in different rooms. However, the central thermal unit is preferable than the construction of several heat sources - this allows you to do with one chimney and significantly saves fuel consumption.

The projects of two-storey houses with furnace heating are held by the same rules, but necessarily provide for reliable overlap between floors capable of withstanding the mass of the brick construction. All heavy parts (bed, oven, hobs) are placed on the first floor, and above are limited only by the heating shield.

If the house is planned according to the principle of the studio and consists of one large room, the Russian oven is made by a central link, along the way, placing the tasks of the space separator. Thus, a homemade hearth can share the kitchen and a living room, a sleeping area and a common room.

Russian oven with a bed in a house with a large living room and a bedroom

Increased doorway in the bedroom does not interfere with air exchange

Examples of interesting planning of houses with furnace heating

Considering projects of houses with a furnace, it is worth considering not only the size of the buildings and the features of the planning, but also the materials used for the construction of buildings. Not all options designed for brick buildings are suitable for wooden structures.

Small country house with a veranda

In this small house one residential room is 15 square meters. meters and kitchen-dining area 8 square meters. meters. The project provides a small bathroom, the entrance to which is in the kitchen, and the unheated veranda.

Project of the house with furnace heating (building dimensions 5 * 7 meters)

The heating device is located in the center of the structure and heated all interior rooms: the kitchen, room and bathroom. The furnace is located on the part of the kitchen, it is also recommended to equip the hob and the oven. If there is a hot water in the house, then the best place for the hot water tank the authors of the project are considered a bathroom.

From the side of the residential room it is easy to add the furnace of the false fireplace, provided for a small recess in the wall. Decorative fireplace firebox will not only decorate the room, but also increases the heat transfer, playing the role of traditional stoves used in the construction of Russian furnaces.

Wooden house with two living rooms and a bathroom

In this log house, two adjacent rooms are a bedroom and a living room in which the kitchen-dining room is equipped. The homely focus in the simpleness is heating all four rooms, including the hallway and bathroom. The Lena is bred into the bedroom, where it serves as a place of rest and increases the heat transfer of the heating device, while remaining warm long.

Plan of huts with a Russian oven

A dryer withdrawn - it is convenient to dry out wet shoes and clothing. The kitchen has a stove. For the warm season, a summer course is provided, allowing us to use only a slab, without cycling heating.

Planning at home with two bedrooms and living room

This house is designed for permanent residence and includes two bedrooms, a living room with kitchen, bathroom and storage room. The furnace is in the simpleness and heating the kitchen-living room and both bedrooms. The bathroom is not heated, but it borders with the hallway, into which one of the furnace corners are derived. If the wood focus is the main source of heat, it makes sense to strengthen its effectiveness using air ducts.

Draft residential building with furnace heating

The kitchen includes a cooktop and a brass cabinet. There is no door to the living room, so heat is evenly distributed throughout the house. If it is planned to build a Russian oven with a bed, it is best to build topchan in one of the bedrooms.

Draft brick house with two furnaces

In a large house for permanent residence in some cases, two separate stoves are installed. This building has two bedrooms, a living room and a separate kitchen. The main multi-turn heating furnace is installed between the living room and the children's room. The heat door and the building body go into the living room, and the children's heated is heated - this option excludes carbon monoxide children entering the bedroom.

The second center with a stove and oven is located in the kitchen and heats adult bedroom. The design of this model can work in winter and summer - in the warm season open summer dampers, through which hot gases quickly go into chimney.

In the corridor, the heat comes from the kitchen, the room is small, so it is enough to leave an open door to provide a comfortable temperature in the hallway. There is no heat leakage to the street, since the flow of cold air cuts off the glazed veranda.

With all the variety of finished projects of houses with a furnace, we recommend contacting a specialist and order an individual plan, expressing your wishes. If one of the schemes is selected, it is necessary to show the drawing of a professional, perhaps it will make useful adjustments and advises how to make furnace heating as efficient as possible, and the house is convenient and cozy.

Video: oven in the home heating system

Depending on the purpose, at home can be both small, designed for temporary accommodation and seasonal holidays and spacious - for permanent family living. Options with two inputs are also possible, such houses are equipped with two inputs. Require additional insulation and noise insulation, extension of durable foundation, communications.

A small garden or country house 6x6 is suitable for accommodation on a small area, and a square form reduces costs not only to materials, but also to heating. The small size of the house does not contribute to operation as a permanent housing, so the costs of additional warming of the structure or the use of expensive materials will not be required. Another plus - for the construction of a fairly inexpensive foundation. The inner space can be divided into a living room and a small utility room.

The bathroom in a private house provides comfortable accommodation. The complex of premises is a bathroom, shower, restroom is designed depending on the area of \u200b\u200bthe house, its type, wishes of the owners. There are rules for the location of the bathrooms in private homes, according to which it is impossible to have a bathroom over the kitchen and residential rooms, it is impossible to combine the restroom with these premises. Sliding frames are often installed in wooden houses to accommodate the bathroom, the sliding frames are often installed so that the finishing and communication is not injured from the shrinkage of the tree.

About us

The building company "Quality House" exercises suburban houses, cottages and baths since 2001. We have tremendous experience in implementing the most complex projects. We guarantee a responsible approach to construction, regardless of the chosen budget plan.

Our company in numbers

For more than 15 years of activity, we have something to be proud of:

• 70% of the 1,200-handed objects are used for permanent residence;
• over 900 satisfied customers, of which about 300 turned re-;
• 36 building brigades specializing in the construction of wood buildings;
• 23 units of special equipment in a fleet, which ensures cost reduction;
• 2 logging production equipped with drying chambers;
• 1 Own defense in the Novgorod region.

Our advantages

• Own production, allowing not to depend on suppliers, comply with the terms and offering available prices;
• Experienced brigades, polite and non-breaking builders, tested;
• The presence of designers in the company is any of your idea under strict technical control;
• Own fleet saves the time and cost of delivery of sets of houses;
• An individual approach to each of your task.

He who thought up to build his own home often does not know where to start. But the layout of the rooms is far from the very first step of the housing process. Before developing a project or draw up a detailed work plan, it is necessary to answer the following questions: what is the total living area of \u200b\u200bthe future homemade focus; Will he be heated; If it is, how? The following stages of construction depend on their answers.

Planning a single-storey house with a 6 × 8 stove

Building 6x6, most likely, a country house, in which it is possible to stay not all year round, but only in the warm season. Therefore, its layout is simple thanks to a small occupied area. The drawing of it is also simple due to the lack of the heating system. And for year-round operation, building buildings are spacious, for example, and more. But then the furnace heating is simply necessary.

However, the construction company can offer with a heating system. It will include a common and detailed construction plan. The customer who wished to have a house with the stove can make his amendments that will immediately be taken into account by the Contractor. This option is called construction for individual orders.

The client can order a company not only the finished project, but also the construction of a typical house with already resolved planning issues.

Option of internal layout and arrangement of the stove in the house

If the customer fully accepts the proposed plan, then the construction will cost him much cheaper.

Benefits

When the layout is well thought out, taking into account the specific heating system, the installation of the furnace is almost independent of the building material from which the dwelling is built. It is suitable for both wooden and brick houses. Its advantage is that for the heating of the premises there is always a wide selection of fuel: coal, peat, firewood, even cardboard and dry branches of trees. The user himself decides to turn, which is more accessible and is cheaper.

Heating with electricity is more expensive, not all residential areas are equipped with a gas pipeline.

The next advantage - the heating of the house does not depend on the heating season of the heat center, from emergency repair and long-lasting fuel supplies. Autonomous furnace, the mode of its operation is determined by the user itself, which does not need a plan for seasonal system shutdowns.

House layout with 6 × 9 meters furnace

The ability of the furnace to create a cozy and comfortable atmosphere is well known. Thanks to this quality, no other heating system is capable of compare with it. Nice, sitting with a book at the stove, inhale the smell of resinous firewood and listen to their quiet crackling. It resembles distant times, received by romance. In addition to these advantages, the stove can be equipped so that it will become an original interior addition.

Read also

Planning a spacious house 10x10 for a large family

A special charm offers a Russian oven. By heat capacity with it, nothing can be compared. It is able to accumulate warmly, and then gradually give it, supporting in the hollow permanent comfort and comfort. In the past, she performed a voor-heating function. Today it is quite rare.

Only the one who likes a rustic designer style at home will decide to decorate his apartments. True, Masters-Pechniki translated, which do not require a drawing for its construction. But recently, the project of the house with the fireplace is the usual offer of construction companies. This fashionable heating device heats, but does not accumulate heat at all. It is used as a decorative element.

The age of technical progress made their own adjustments. Today, the house is common with a stove, working not only on solid fuel, but also on electricity, gas, fuel oil. But the most affordable material of the heating is still firewood.

Rules of installation and operation

The form, the appearance of the furnace fixes its drawing. Many try to install it somewhere in the corner so that no one interfere with, did not occupy a lot of space. But this is a unmarked installation criterion. Its most rational location reflects, as a rule, each project of a heated house developed by the company.

In, as well as in or preferably, put a furnace structure in the center itself.

Detailed house plan with 8 × 8 stove

Then the effect of it will be the greatest, because it will successfully warm all the premises. As practice has shown, it is impossible to install it with the outer wall so as not to heat the street.

If the housing plan with the furnace system is designed professionally, then after its implementation, even in all year round will be warm and cozy. The stove is recommended to plan in the country or not higher than the two-storey. If on the second floor is still cool, then some residents are closed for winter, living only on a well-heated first.

Read also

Dominics for recreation or guest places on your site

Very important rule: a house with a furnace should have an effective heat shield. Otherwise, there will be all efforts to heate it in vain. And cash on the purchase of fuel literally will fly into the pipe. Do not save on the insulation of your housing. True, no company will offer a project of the house without thermal insulation. But if its layout with a centralized heating system, then such a construction plan is not suitable for installation of the furnace.

Layout of the Finnish house with a furnace size of 6 × 6

It is mistaken to think that if in a small building, for example, 6x6, put a powerful oven, then a small amount of firewood will be sufficient for heating. This is not at all. All of them will go only on the weak heating. And the rooms will remain cold. Each house with a furnace is equipped with a heating structure corresponding to the space that it is designed to heat. So, if the home focus is 6x9, then the heating structure should be more heathed.

Another important rule that should not be neglected is the installation of a furnace to a separate foundation. He can not be one for her and for the whole house. It should clearly demonstrate both the overall housing project and a separate drawing of the furnace for firebox.

Detailed Frame Drawing With 5 × 6 Stove

The fact is that the soil is seated in different ways in different weights. Why the stove can shift, cracks will appear. As a result, it will not only be heat in the room, but also a carbon black smoke.

Knowing installation rules, we should not forget about the rules of use. The house with the furnace assumes a strict execution of fire safety instructions. And no matter what kind of area it is, 6x6 or much more. It should be remembered that the chimney damper is closed on time. If the coals have not burned enough, the room will fill the carbon monoxide. And the consequences of this are very sad. If you close it too late, then the precious warmth will go into the pipe. The repair of the furnace is usually performed by the one who installed it.

A frame house, like any other in Russia in the cold season, need to heat. There are many ways to have a lot of ways, so the main task in the device of heating a skeleton house is to determine correctly for yourself. When choosing a heat source in a frame house, you can pay attention to the oven - a traditional heating device in Russian, and not only, the house.

This method has several significant advantages. First, it is relatively simple. Of course, to build a Russian oven or fireplace is art, but you can buy and install the finished stove. Secondly, for the furnace, as a rule, you can use different types of fuel, which greatly simplifies and reduces the cost of heating at home. Finally, thirdly, the furnaces are completely different, and its main task is the heating of the room - they are also solved in different ways. Therefore, there is always the possibility of choice for the most complete satisfaction of the needs of residents at home.

Of course, there are still disadvantages from furnace heating. We assume that the main one is the need for constant extracts and the subsequent cleaning of the furnace. With this, many complicating life of the moments are connected: it is necessary to store the fuel supply somewhere, to bring it into the house, remove the garbage, etc. Although, probably, there will be people for whom the furnace is a pleasure, especially if the frame house is intended for Periodic accommodation. Then for them this deficiency will turn into dignity.
The furnace is a massive design. Not to mention the Russian oven, which can occupy half a day, even the usual cast iron bourgear requires a device of the relevant base. And sometimes even its own foundation.

The use of any type of furnace heating for a frame house is associated with increased fire hazard. This is due to the high temperature of individual elements of the furnace, the possibility of emissions into the premises of sparks and split coal, as well as the specifics of the skeleton house, almost 100% consisting of wood.

Frames for a frame house

By and large, in a frame house you can use any furnace. However, it is not always appropriate or just safe. For example, with a large desire in a frame house, it is possible to build a Russian oven. However, for this you have to arrange your own foundation for it, surpassing the foundation of the house at home. And, in fact, do not build a stove inside the house, but to build a house around the furnace. The feasibility of such a decision is questionable. Therefore, among the entire variety of furnace equipment, it is necessary to highlight those types that are most suitable for use in a frame house.

Selection of a furnace for a skeleton house

Before starting the selection of the furnace for your home, it is necessary to clearly decide on the residence mode in it. So, if you live in the house constantly, it makes sense to install a stove with a large thermal volume. Such a design slowly warms the room, but long retains heat. And it can be reset once a few days. And if your frame structure is used as a garden lodge, it is quite reasonable to equip the fireplace in it. Universal version - furnace-fireplace. Not so beautiful, just like a fireplace, is not as convenient and practical as the usual oven, but the main function of both structures is performed properly.

The selection of a particular furnace to a specific house should be made by its thermal power, or heat transfer. For industrial furnaces, this passport data can be obtained from the seller. If you want to arrange a furnace with your own hands, keep in mind that its heat transfer will be on average about 400 kcal / h from each square meters of its free surface (furnace mirrors). For a normal heating of the frame house, the thermal power of the furnace should exceed the heat loss at home and ensure air heating to room temperature at the lowest temperatures outside. Immediately mention: the exact calculation of heat engineering characteristics is a very difficult task. Therefore, in practice, it is resorted to calculations simplified, empirically, when the size of the self-made furnace or the heat transfer can be easily compared with the dimensions of the heated house, the type of fuel used and the minimum outer temperature.

As the source data you need to know the length, width and height of your frame house, that is, heated volume. Next, determine the comfortable temperature inside the house and the minimum outside it. Based on the type of wall insulation, gender and ceiling, as well as its thickness, determine the heat loss of the enclosing house designs without windows and doors. Multiplying this value to the coefficient of 1.3 is obtained by an empirically overall heat loss of the house. Based on these results, calculated tables are built, of which it is easy to obtain the desired sizes of the furnace. So, if the minimum temperatures in the winter do not exceed -30 ºС, and comfortable for tenants room temperature + 22ºС, then for heating 1 cube. The meter of the internal volume will require about 25 kcal / hour. For a single-storey skeleton house of 9x7 m and the height of the ceiling 2.7 m, it is necessary to produce 4250 kcal / hour heat. Dividing this amount by 400 (heat transfer 1 sq.m. furnaces) We obtain the surface area of \u200b\u200bthe homemade furnace - 10.6 sq.m.

Thus, the oven and frame house may well get along with each other. Especially if the owner of the house is tired of the benefits of civilization and dreams of being closer to nature and "roots".

Bruus houses with boiler house are created for winter use. The presence of a special furnace room suggests that this is a good project specially prepared for year-round residence.

The boiler room can also be located in a single-storey cottage, and on the ground floor. It depends on the wishes of the customer, the selected project and the preferred heating system.

Where should the boiler room be located?

In most layers of suburban cottages, the furnace is located on the first floor. This is due to the fact that the lion's share of thermal heating schemes implies a reinforced contour on the first floor. The second floor is heated not so intense, but is often completely deprived of heating.

Properly designed boiler room must comply with all specifications, and respond not only for heating, but also water heated.

Often, the bathroom and the bathroom are located near the furnace room to provide a strong water pressure.

What should be placed in the boiler room?

By ordering turnkey construction, you need to understand which units and fixtures must be in the furnace. The optimal list looks like this:

• Boilers.

Can work on coal, gas, wooden briquettes and bioflices. For the heating of the cottage from the profiled timber, both mono-boilers are suitable (operate in one form of fuel) and combined solutions. They are able to recycle several different sources of energy.

• Devices for heating flow water.

This is usually electric boilers. Less frequent gas columns of various power.

• Water tank.

A large tank in which the heated water accumulates. Usually its container does not exceed 150-200 liters. This is enough for 2-3 people during the day. Water in such a container can remain hot for a long time.

In addition, filters are installed in the furnace for coarse water purification, hydraulic separators, various elements of pipe strapping, shut-off fittings and an electrical shield.