How to put a plastic door. Instructions for installing plastic doors. Excading the method "in a deck"

The installation of a plastic entrance door will help with their own hands to save significantly, the tangible share of the price for the design falls on the installation. Carefully having studied the nuances of fastening the door design from plastic, you can cope not worse than the wizard.

Popular material for the production of windows and doors, which is distinguished by resistance to humidity and temperature drops, - polyvinyl chloride, installation of PVC entrance doors is made at the end of all finishing works. The floor indoors where the installation will be made must be dry and clean. If you are planning to lay parquet or laminate, paint the floor, it needs to be done before installing the input structure.

What will take for work

To install the input plastic door you will need:

building level;
dowels;
mounting foam and gun for her;
pencil;
roulette;
wedges of wood;
mounted knife;
chisel;
screwdriver;
perforator.

You may need a circular saw and grinding. Take care of enhanced fittings, prepare mortise locks.

Preparation of the input group

If you encounter the installation of interroom or entrance door for the first time, you may need a measurer. He will measure the opening and tell how to install the plastic door correctly. Works start from installation site, that is, the doorway.

Preparation of the doorway

The entrance doorway should be wider than the door design, the standard clearance is 15-20 mm. PVC doors are made taking into account the size of the opening, so there should be no special difficulties at this stage of plastic structures. Prepare the surfaces, they need to be cleaned and dried may have to be pricked. If the door is not included in the door, it needs to be installed in advance. From the side where the door loops will be, are driven by several nails.

Assembly and installation

Plastic doors input easier to install together. First set the door frame in the opening. At its perimeter, lay the wedges of the tree. With their help, you need to fix and align the case, it will help to avoid wall deformation. Washing carefully, do not attach a lot of effort to this not to damage the plastic.

Installation of the inlet door design starts with test holes for fastening in the profile reaching the wall. To do this, I use the drill with a diameter of 11 mm. The holes are made at a distance of 15 cm from the corners, the distance between the holes around the perimeter should be 30 cm. Delublize the holes using a drill with a smaller diameter, a size of 10 mm is suitable. Dowels installed in the holes. Screws in them do not fully. The design of the entrance door is aligned with the building level, only after that it is possible to screw screws to screw.

Now hang the leaf sash, controlling the position of the web in the level. Throws you can fix with loops and adjust. When sagging, you need to twist screws in the loop at the bottom. If it is not pressed tightly, in turn, screw the screws in both hinges to the desired position.

It is necessary to adjust the clamp vertical if the entrance door adjacent to some parts of the box. For this, screw the screws that look inside, the upper or lower in accordance with what part of the sash is poorly adjacent.

Installing a closer

The closer allows you to lock the entrance door in the open state, adjust the speed of its opening and closing, make this process more smooth. The closer will slow down loop and fittings. Set it better from the inside of the front door to isolate from the temperature and humidity drop.

How to seal the opening

After the installation is made, all gaps and seams are filled with mounting foam. Before applying, it is recommended to moisten the surface with water. The sash itself needs to be left closed to complete drying of the sealant, and adjacent areas can be protected from foam from entering the painting tape.

Surplus foam are trimmed with an assembly knife with a retractable blade. The foam drying time is about 24 hours. It is necessary to pay attention to the fact that the mounting of the slopes on the input structure can be only after complete foam drying.

The frame for slopes is attached to the wall using selflessness, free space is filled with insulation. After that, it is necessary to secure the material by the construction adhesive tape and install the decorative panel by fixing them with nails.

Installing the entrance door design with your own hands - already saving. If you are confident in your abilities, you will succeed not to resort to the services of the measurer. When choosing the cheapest materials, the quality of the attachment may suffer, so choose foam, dowels and other consumables of the average price category.

If the budget is limited, pay attention to suppliers from China, it will be cheaper designs from PVC popular brands. It is important to avoid a situation in which the need to dismantle an incorrectly installed design followed by re-installation.

Following the wave of replacement of wooden windows on plastic, the wave of replacement of wooden doors is moving. Sometimes it turns into the "ninth shaft" and sweeps everything made of wood lumber on its path. Therefore, it was time to figure out how independently, without help, establish this novelty, which will certainly help save money in the process of installation and further exploitation.

Methods for installing plastic doors

Plastic door is a ready-made equipped product consisting of a canvas, boxes and all the necessary fittings. Unlike a wooden door, which is collected from individual parts, the plastic comes in the assembled form, so only the competent installation is included in the installation task. In the overwhelming mass of cases, the doors are made to order, under the sizes of a particular goiter. Therefore, to customize the dimensions in the installation process is not required.

For the transport of plastic windows and doors made to order on the size of the size, specially equipped cars use

At the same time, there are a number of models designed for standard dimensions:

2000x190x70 mm;
2000x190x80 mm;
2000x190x90 mm.

These sizes are agreed by manufacturers with construction standards and are suitable for most doorways in civil and housing construction.

The depth of the day does not matter, since the thickness of the plastic structure fits into any size of the walls and partitions. The only exception is wooden partitions with a thickness of less than 75 mm. But in this case, build the door block into the wall is real. To do this, use the technology of extension of the doorway.

Installation is made in one of two ways, which is selected on the ground based on the existing conditions.

According to the degree of strength and reliability, there is no difference. In the other case, the door toughly relies on the rustle. But in the first version, the appearance will be more attractive, and the frame will remain a whole.

Video: Installing a balcony block according to GOST

What will be required to install plastic doors

There is a small difference between the balcony, inlet and interior plastic door. It consists in additional discovery planes. Entrance and interior doors are a classic version of the opening doors that open and close with turning the sash around one of the axes (right or left) door frame. The balcony door is sometimes additionally equipped with the function of the ventilation and, like the window, swallows the rotation of the canvas relative to the threshold. This function is achieved by using more complex accessories, but it practically does not affect the installation process.

Tools for installing plastic doors

To assemble plastic doors, a standard carpenter set of tools is needed:

Consumables

When installing doors, the following consumables are commonly used:

mounting foam;
mounting wooden or plastic wedges;
silicone waterproof sealant;
For squeezing sealant from tube apply a special pistol
dry sand cement mixture, water;
plastic L-shaped profile to install slopes (if the slopes are mounted from plastic).
Plastic moldings are selected in size and color

The size of the L-corner is selected at the place. The wider the wing of the profile, the easier it is to hide small defects. The sealant is needed the same color as the door, most often used white.

For interroom and balcony doors, ready-made plastic slopes are used. To properly select the width of the acquired slop, measure the depth of the doorway and take the thickness of the door frame from it. As a result, the slope is selected with a reserve of 2-3 cm in a big one, taking into account the error in the slope of the wall.

When choosing a width of a material under plastic slopes, it is necessary to take into account the natural curvature of the walls

If the slopes are planned cement, for example, at the input doors, the calculation of the amount of the mixture is performed in accordance with the table given by the manufacturer on the packaging. In this case, except for carpentry tools will also need spatulas and tanks for the preparation of the solution.

For the device of slopes, you can use drying sheets (dry plaster)

Preparation of the Outline for Plastic Door

Preparatory work consists of several stages.

Preparation of the door loan. If the door is made to order, then its dimensions perfectly correspond to the original dimensions. In this case, the preparation lies in the liberation of the outflow from foreign objects, the removal of the shocking plaster and the primer of the ends of the elder. The primer of deep penetration is used, which fastens the surface well and eliminates dust. If the installation of the standard door is made, you need to adjust the discourse under the size of the door block. The magnitude of the technological gaps throughout the perimeter is kept in the range of 3-5 cm. The bottom of the frame is rigging on the threshold (without clearance). Sometimes it has to be expanded with the help of a perforator, sometimes, on the contrary, lay out an additional row of bricks (or build a wooden bar wall).
If the door has been made to order, it is necessary to repeal for the preparation of the Owl and camp the ends
Disassembly of the door block. As a rule, transportation is carried out in the assembled form, which guarantees the safety of the product. Therefore, to facilitate installation, the sash is separated from the frame. To do this, remove the fingers on the loops. When performing the operation, caution must be taken, since the canvas with the glass is quite heavy - it is desirable not to drop it.
Installation of fastening elements on the frame. If fixation is applied by brackets, three metal plates are screwed to the outer side of the box. For this, there are special grooves in side racks. If the mount is carried out by conventional anchors, the holes of the desired diameter are drilled through the door frame. In this case, the heads of anchors will remain outside, they are subsequently closed with plastic plugs. The number of holes is also three on each side.
Direct suspensions for drywall can be used as installation brackets.

This preparatory work end.

Video: Installation of plastic windows and balcony doors

Installation of plastic doors with their own hands

In step-by-step instructions, reflect the sequence of the plastic door assembly.

Installed door box. As already noted, the box is the unintended design of the rectangular shape. The task consists in the correct location of the frame inside the doorway. First of all, it is necessary to decide exactly how to mount it relative to the depth of the day. The door can be located both in the middle of the wall of the wall and flush with one of the planes. In the first case, there is a need to arrange slopes on both sides. In the second - on the one hand there will be platbands, and on the other - the slopes. Based on this, the location of the threshold is determined. The frame is set to the lower part on the threshold line and raise the vertical position. In some cases, it is necessary to raise the threshold to the level of clean floor. For this use additional stops in the form of wooden bars or brick pieces. After that, the design must be pre-fixed. It is best to drink it on a dowel, screwed up near the upper crossbar. The same stops will help to fix the lower part. Four reference dowels will determine the plane of the door block.
If the width of the box coincides with the thickness of the doorway, the joints of the joint are closed by platbands on both sides
Using the hydraulic level (long to 50 cm), the horizontal position of the threshold is adjustable. The fixation of the desired position is carried out through wedges, driven by a hammer under the bottom of the frame. It is necessary to achieve an absolutely smooth position - the air bubble must be located strictly in the middle.
The accuracy of the hydraulic level readings can be checked according to knowingly horizontal planes, for example, on the windowsill, balcony railings, etc.
The side racks and the top bar of the box are fixed in the same method. At the same time, it is not elishive several times to control the correspondence of the vertical and horizontal orientation of the doors. And only after the unit is fixed from all four sides, you can start the main fastener. At the same time, it is necessary to strive to ensure that the side gaps are about the same.
Side racks are first first fixed by wedges, and then finally fasten with anchor nails.
Fasteners are performed on the self-tapping screw. The holes are drilled by the perforator, if the wall is a stone, or a drill (screwdriver), if the opening is wooden. It is important to mount the stops so that when installing they do not deform the door frame. From these considerations, screws are left not fully screwed, the total tighten is produced only at the very end of the operation. It is especially important to observe this rule when fastening the frame by direct fixation method (without the use of brackets). All stages of tightening are accompanied by orientation control in the horizontal and vertical plane.
Mounted door leaf. The procedure consists in hanging the hinge sash. The assembly begins with the lower canopy, after which the canvas is installed in the closed position, combine the halves of the upper loops and make a metal finger into the standard hole. The order of pads of the canvas on the doors with the function of the ventilation is similar. After that, adjust the position of the sash. In plastic doors, adjustable canopies are used, with which the correct position of the web is approved.
Adjusting the position of the web is carried out using special mechanisms embedded in the door design
Filling the gaps between the wall and the door frame. As already noted, two situations are possible here:
In order for the doorway to look aesthetically, decorative slopes are installed over the mounting dilution. The entrance doors are immutted with cement composition, interroom and balcony are often framed by ready-made plastic panels. The technologies for the installation of slopes is not very complex, but requires accuracy and certain skills:
- for entrance doors, a standard sand, cement and water mixture is prepared. The trunk is thrown by a layer of solution and leveled in a spatula. The procedure can be broken into several steps, gradually connecting the edge of the door with the angle of the door slope. First, the side vertical planes "remove", then the horizontal plane above the upper crossbar;
  The solution toasting the input doors is prepared by adding water to a dry mixture according to the recipe on the package
- plastic slopes are installed on the mounting foam. Initially, two vertical surfaces are cut. In width, they are released over the edge of the wall and cut after the foam is completely frozen. The top plank is mounted last. In places of plastic panels, L-shaped molding is installed, the angles between the slopes and the frame are smoothed and sealed with a thin layer of silicone sealant.
  In some structures, instead of foam use mineral wool, and the discharge panel is fixed using a lock with a lock lock

Different situations use different fasteners. So, in the doorway of a wooden house, only self-tapping screws with a big step of thread are used. To the wall made of soft material - foam concrete or aerated concrete - the door block must be attached to special dowels designed for a porous surface. In brick and concrete buildings, use standard anchor nail.

Video: Installation of plastic door

It is strictly forbidden to install plastic windows and doors using conventional dowel-nails. In extreme conditions, for example, in case of fire, the plastic expander can might be melted, the fastener node will lose strength, and the door, losing the support, will fall out of the door loan.

Upon completion of the assembly, the doors are equipped with auxiliary fittings - door eyes and closers. Since once again drove the cloth undesirable, it is better to use an electronic eye overhead. It is fixed at eye level - at a height of 150-160 cm from the floor. But if the installation in such a position is unacceptable, you can shift the eyepiece (and in fact, the miniature web chamber) to the top bar, making an amendment to a convenient angle of review.

Electronic eye is a miniature chamber, the image with which is transmitted to an autonomous monitor or a mobile phone display

Closers are attached as usual. The case with a power unit is located on the wall, and the end of the movable rod is fixed in the upper part of the web. The conclusion model is selected based on the mass of the sash and the magnitude of the hip angle. The more traction effort, the more high demands are presented to the strength of the attachment.

Installation of adjustable closer significantly saves the resource of the door, compensating for sharp cotton sash when it is closed

How to check the correct installation of plastic doors

Before starting operation, the plastic door must be tested. The control is carried out according to the following parameters.

The density of the fitting of the sash to the reference plane of the frame. In the working position - with closed doors - the sash should evenly lie throughout the perimeter evenly, and the rubber seal is evenly pressed throughout the alignment plane.
The magnitude of the gap between the web and the frame. The rug from the side, inverse seal, should not exceed the permissible dimensions (3-4 mm). The difference in the magnitude of the gap in different angles is talking about sowing skew.
Door hinges. When working, they should not publish squeaks, and the opening and closing of the doors should occur silently.
The locking device, including a handle pad, should trigger gently, without too much effort.

If at least one of the items observed an explicit inconsistency, it is necessary to adjust the position of the door canvase. As a rule, the package includes an adjustment key and the layout of control screws. The key is a hexagon rod with a diameter of 2-3 mm, curved for convenience in the form of the letter G. Following the instructions, you need to achieve the optimal position of the door flap.

Dismantling plastic doors

If you need to disassembly, the door is dismantled in the order of reverse assembly. Briefly list the main stages.

The door canvas is removed.
Disasters the slopes.
The fasteners are weakened.
The door frame is released from the loan.
The remnants of the mounting foam are cleaned.
For transportation, the extracted door is collected again, the canvas is inserted into the frame, fixed the lock of the lock in a fixed position.

Video: how to disassemble and collect a balcony door

With independent execution of work on the installation of plastic doors, you need to remember the safety technique, follow the installation technologies recommended by the manufacturer. It is necessary to abide by caution in circuit with a glass, and using electric tools - perforator, drill, screwdriver - use personal protective equipment: gloves, glasses and respirator.

Mounting the door frame and sash:

We do not advise you to make a threshold under the door on your own - it is better to buy a plastic door immediately with a finished threshold. So you will experience significantly less difficulties upon subsequent adjustment;
Many advise before inserting the door to drive into the walls of small carnations to which it will rely for the convenience of alignment. We do not advise this to do so that the walls do not deform the walls with superfluous materials. Just substitute the door frame in the opening, put on each side of the perimeter for 2 wedges and then check the level when the door is fixed and does not fall. In the locations of deviations or add lining, or reduce existing;
When the door is fixed, and all sides (horizontal, vertical and vertical in the context) are checked, go to the "drilling" of holes for fastening the frame. It is desirable that these holes create a manufacturer, but if they are not, then measure the same distance from the top and bottom of the box (about 20-30 cm), as well as find the center. At the top of the frame and in the threshold, also measure 20 cm from the edges. In all marked points, make a hole with a diameter of about 1 cm. Then insert the dowels into the holes;
We screw the bolts into the dowels, starting by the loop. Screw not to the end (somewhere on 2/3 of the bolt length). When all bolts are screwed, re-check the vertical and horizontal around the perimeter of the box, as well as the vertical in the context;
The main thing is that the frame stood vertically in the context (that is, when you look at the frame from the inside). And the perimeter vertical and horizontal can always adjust the wedges;
When the door is aligned, tighten the bolts to the end and again, just in case, check vertical and horizontal;
We put the door to the loop and check the move and press. The door must be fully opened and evenly pressed to the box. If not everything smoothly, you need to adjust the plastic door. Also check all locks and handle for performance;
If the door in the adjustment does not need, then we spoil the space between the door frame and the opening, pre-mixing it with water. Klinia is desirable to narrow after a few hours of frosting foam and put the formed spaces. The door must be closed and do not open about a day.

How to adjust the plastic entrance door

As a rule, the plastic door must be adjusted if it is either overwhelmed, or is poorly pressed. If the plastic door closes with difficulty, it may be a consequence of either the shifting of the sash (due to the weakening of the loop mounts), or the deviation from the clamp vertical.

If the sash (the door itself) saves, then you need to adjust the loops. More precisely, it is necessary from the bottom of the loops to twist the screw that supports the sash at the desired level. Then the door will be completely pressed against the frame.

If the door is loosely pressed into some kind of part of the box, then you need to adjust the clamping vertical. To do this, remove decorative plastic lining with loops and adjust the screws that look inside the door. If the sash is poorly pressed up, then you need to fasten the screws to the top. And vice versa. Also, it is possible that you will have to unscrew the screws a bit. In general, manufacturers equally manufactured mechanisms for fastening and adjusting plastic doors.

It is also possible that the door is poorly pressed, for example, at the bottom because it is weakly fastened to the loop fastening and the first presses at the top, not giving the lower part to reach the end. You can either weaken the screws at the bottom, or tighten up.

If the plastic door is shoined in the side, it is necessary simply in the part where it is shingled, move it to its loop, adjusting the position of the screws. Screws that are bold to the door must be shifted towards the door to division or several millimeters.

Installation of plastic doors

The advantage of plastic doors is indisputable. Excellent noise insulation, do not leave dust from the street, do not dry, do not smender and do not be brown. Plastic products are used in balconies, such as interior (offices, houses) or even as entrance doors.

Comfort of these models in different forms, colors and sizes. You can order PVC doors for almost all doors.

The installation of products from employees from the manufacturer will result in additional costs. To save during the repair process, try install the plastic door manually.

It is not difficult, the main thing is to follow the basic rules and take action step by step.

Installation and installation of plastic doors

First you need to prepare the necessary tools. You will need:

Door and set of parts
Hammer drill
drilling
Foammer
voron
Sealing mass
a hammer
I have seen that
roulette
bit
Nails, bolts, dowels, screwdrivers
Grinder machine

First you need to prepare the necessary hole for installation.

To do this, clean the place of installation of old plaster products, increase the surface and remove the dust. Then you need to disassemble the door. If you ordered a closed door, it is very likely that you send it in difficult form.

How to install the door?

To facilitate the installation, it is better to divide the door targeting and a box. This will help you quickly and easily install the door without any help.

Then attach the fasteners.

PVC designs are equipped with special brackets that are attached to the groove for this purpose on the other side of the box, and from all sides they must be placed in three parts. Then attach the mounting device. Tighten the screws in the hole (more). They will be used as support.

Depending on the thickness (in mm). Door, you need to put icons on the sides of the holes and install two stops in them (screws or dowels).

Below, four stations must be installed so that the installation plane is properly adjusted. After that, go directly to the installation of the product.

Phases Installation of plastic structures

The product should be placed in the hole and lean to the dowels, which are given in the upper part of the hole.
The neck box is slightly tilted, so the edges are located along the edges to the edges. The distance from both sides should be the same.
We need to prepare wooden wedges, hammer, perforator, lightning and level. The level is placed on the door threshold, the wedges are installed under it and the perfect horizontal position is achieved in accordance with the level.
Using these pins, the door must first be securely fixed in the upper part of the hole and then down.
The box should be tightly pressed to all dowels drives that play a certain role. When the door frame is firmly installed, you must check its location at all possible levels.

If the errors are visible, you need to set the position of the door.
After installing the box, you must start cooking holes for fastening the equipment. It is better to start from the top where there are sheds. First, the fasteners must be fully installed on one side of the box, and then on the other side. Make sure the fastener do not bend the door frame so that it can move.

Once all these steps are completed, the door items must be blocked and sealed.

Always turn the door flap on the hinges of the box.
If the door has a ventilation function, both half of the top hinge must be aligned with each other, and then insert the pin.
Seal in the hole. This should be done by closing cracks using a mounting foam. When sealing, you need to follow simple rules. Before foam dry, the door target must be closed.
Apply foam only on a moisturized surface. This will provide better adhesion, as well as a moistened seal quickly and efficiently polymerizes. You should also carefully monitor the uniform filling of the foam by all joints. It is best to use a sealant that slightly increases when cured. This eliminates the possibility of deforming the frame of the door frame.

As you see, the installation of plastic doors is simple and fast, the main thing is to try to succeed.

Home »Door installation» Installation of plastic doors: Subtleties and nuances of technology

Installation of plastic doors: Subtleties and nuances of technology

Despite the fact that wood is exclusively natural and environmentally friendly material, most people prefer it a product of modern chemistry. This can be seen from how far the people are changing old wooden windows and doors to modern plastic counterparts.

There are many reasons for this, but the main of them is the reliability and invariance of dimensions depending on the temperature and change of humidity. By giving a tribute to the fashion trend, in this article from the site dveridoma.net we will study the question of how the installation of plastic doors is performed with your own hands and consider this process in all the smallest details.

Installation of plastic doors photo

Installation of plastic doors: Preparatory work

Let's say directly - any preparatory work related to the installation of something is aimed at achieving two main goals.

On the one hand, this assembly of the product being installed (in our case, these are plastic doors), and on the other hand, these are steps designed to alleviate the process of production of installation work. If you correctly think over all the technology from the beginning and to the end, collect the product to the maximum and use additional devices, then the installation of the plastic door will be easily easily.

What do I need to do? There are only four things.

Feed up and put in order doorway. In most cases, it's all the opposite - plastic doors are usually manufactured to order, and their size (in particular, the width and height) almost always perfectly correspond to the dimensional dimensions. Therefore, within the framework of this item, it will be enough to clear the place of installation of a plastic door from the raging plaster, remove the dust with primer deep penetration and can be moved on.
Disassemble doors.
In most cases, all plastic doors come from the manufacturer's plant already assembled. In a disassembled state, only two-way doors can be supplied and it is not always - mostly the manufacturer prefers to remove only double-glazed windows (if any). Here you will need to separate the door leaf from the box - this separation will largely facilitate the installation process of the door and allow you to cope with it even alone.
Install mounting elements.
Installation of plastic balcony or entrance doors, and rather their mounting in the opening can be carried out in two ways - through special brackets mounted on the back of the box to a special groove or using conventional anchors installed by straight through the door frame in advance drilled holes.

I think you should not explain that in the last situation, the appearance of plastic doors is largely suffering. Depending on the selected method of fastening the door block in the opening, at this stage of the work you will need to either install the brackets or drill holes in the box. Both brackets and holes are made three pieces on each side.

How to install a plastic door photo

Mount the device.

This, of course, is said loudly - in fact, you will have to score in the opening of only a couple of nails or spin the same amount of self-tapping screws that the function is assigned. First you need to decide on the location of the plastic door in the opening - to decide where it will be (in the middle of the opening or from his edge).

Taking into account the thickness of the door frame, you need to make the corresponding marks on the side of the openings at the top and install two stops in these places, tightening a pair of screws or scoring a dowel.

The exact same operation is done at the bottom of the doorway - four clogged dowels will fully define the plane of the installation of the door block in the opening.

Having done all these frequency operations, you can proceed to direct solving the issue, how to install a plastic door.

For further work, you should not call any difficulties.

Installation of plastic doors: two ways to mount the door frame

As mentioned above, consolidate the doors in the opening in two ways. If we talk about the choice of one or another of them, here only the presence or absence of brackets can play a decisive role - as a whole, both by labor intensiveness, and by simplicity of installation they are about the same.

But if we consider this moment from the aesthetic qualities, it is natural to better give preference to the installation of the opening with the brackets - subsequently they are hidden by slopes and no problems are delivered. So, let's start the installation of the plastic door to the balcony or in any other place and imagine it on the items for a better understanding of the essence of the question itself.

Insert the door to the opening and clamping it on the dowels, clogged at the top of the opening.
To begin with, the door frame is better to put a little under the slope and orient its position in the opening so that at the edges of the box the same distance to the opening remains.
Now we harm a couple of wedges, not far from myself put on a robin level up to half a meter, the necessary fastener, a hammer and a drum connected to the network is ready.
We put the level on the door threshold and with the help of wedges, driven by the threshold, we achieve a clear position of the air bubble level.

Installation of plastic balcony doors Photo

Now, with the help of the same wedges installed on the sides of the box, fix the door first at the top of the opening, and then in its bottom. Do not forget that the box should be tight pressed immediately to all four rests (scored in the opening of the dowels).

Now that the door box is stable, check its orientation with respect to all possible levels.

If necessary, adjust its location.

Only after you make sure that the box is installed correctly, you can take the perforator, drill holes and install fasteners. Start better from above, from the side where canopies are located. First, fasteners are installed on one side of the box, and then on the other.

It should be noted that immediately after installing the dowels or self-tapping screws, it is not completely tightening. Also later, when all of them will be installed, the final rigid fastening of the box is performed - this process should be controlled by the level, especially if you are using a method of fixing directly through the box.

It should be traced that the anchors, dowels or screws do not argue the door frame profile and did not disrupt its orientation in space.

Installation of plastic door to balcony photo

Everything, the box is worth, now you can relax. The bulk of the work has already been done, and until the end of this process, it remains for a long time. To see how to install the plastic door correctly, you can in it.

Final stage of work: assembly and sealing of the door block in the opening

The first thing you need to do is hang the door cloth to the box - everything depends on the type of door.

It should be understood that the balcony door and interroom or input have small design differences that are expressed in the loop used - on the balcony door, due to the presence of air function, they have a more complex design and, naturally, differ in the principle of installation. It is made approximately as follows.

To begin with, the cloth is hung on the lower canopy.
Then the doors are installed in the closed position, two halves of the top loop are combined with each other, after which they are inserted into them.

If we are talking about the door canopies of a standard design that does not provide for the function of ventilation, then everything is simple here everything is simple - the door leaf is put on the loop of the box without any complex operations.

Installing the inlet doors of plastic photos

Finally, a few words about the last stage of the work, which provides for the installation of plastic inlets or interior doors.

It is a sealing of the door frame in the opening - it is carried out using an unsolicited polyurethane sealant, which is more famous called mounting foam. For high-quality sealing of the door block, you will need to consider only a couple of moments: first, the door canvas should be in a closed state to complete foam drying and, secondly, it is necessary to apply sealant to the surface pre-moistened surface.

With high humidity, the mounting foam is polymerized faster and better - in addition, its adhesion with a box and opening will be more reliable. Well, in the rest of the sealing process, it looks quite simple, and everything that needs to be controlled here is a uniform filling of the seam.

As you can see, the installation of plastic doors is not much different from the installation of metal entrance doors or interior products from a tree.

Differences, of course, are, but they are all observed at the level of subtleties and nuances. The only thing that can be added is to the account of the mounting foam - it is better to use a sealant that has a small pressure force when frozen (for example, "macroflex 65). It will give a guarantee that even if you are overpowing with the number of foam, it will not be squeezed and will not deposit the front door.

PVC doors though have many advantages, but even they need to be adjustable over time. Of course, you can contact the installer for help and call a specialist if the service life under warranty has not yet passed. And if already expired, then the call of the master, most likely, will be not cheap. Yes, and why pay more if everything can be done alone.

What situations are required to adjust the plastic doors, how to make it yourself and correctly, what is the best to use tool for this?

For the repair of the input plastic doors, most people remember, as a rule, in the very least queue - at the moment when a cold wind begins to the room begins. In order for such a situation, it does not happen to you, it is necessary not to wait for strong frosts, inspect the door design for problems and in case of detection they immediately eliminate.

Emergency cases adjustment

Urgent adjustment of the balcony plastic door is carried out in case:

construction savings - the web when opening or closing starts to cling to the threshold or for the door frame;
Insufficient clips - the sash ceased to fit tightly, transmitting air slots between the frame and the blade;
Lateral displacement - the sash began to cling to the frame in the middle;
door fittings fault - the handle began to turn badly or, on the contrary, it became suspiciously easy to turn.

And even if you bought an expensive entrance door from a reliable manufacturer, this does not mean that after a few years it does not need to adjust its adjustment.

It may be connected with the shrinkage of the building, with the wrong installation, due to the inappropriate process of operation, the sedimentation of the structure from its own weight.

Tools for work

It is desirable to have at the disposal:

hex key (from 2.5 to 5 mm);
Passatia;
Roulette;
flat and crusading screwdriver.

PVC door: device

The one who has not installed the balcony door himself was most likely not paid attention to the features of its device.

Even having surface ideas about the principle of operation, you can easily adjust the door.

PVC doors can be installed with accessories:

Swivel-folding. The design works in several modes - like the door and as a window. That is, the sash may turn out and lean.
Normal. Closes on the handle and attached to adjustable canopies.

Options for adjusting the door with a swivel-folding principle of work

Methods for regulating fasteners, the design characteristics of individual parts from different manufacturers may differ.

But the basic principles in the instructions for regulating do it yourself the same.

Customize balcony doors in such directions:

horizontal (the distance between the web and looping racks is adjusted);
vertical (the height of the door is changing relative to the opening);
the frontier direction (the density of adjustment of the door base to seals changes).

Horizontal setting

To find fasteners settings, you need to open the door and promote the decorative panel.

For this, the hex key is useful.

Movement to loopback racks and back is carried out by an adjusting screw located under a plug. When the door closed clings the box on the side of the latch in the middle or throughout the vertical, in each of the three loops you need to scroll 1-2 times clockwise.

If the bottom edge of the sash (far from the loop) clings to the threshold, then turn the screws should be in the upper and middle rack.

Vertical setting

With the help of vertical adjusting fasteners, you can shift the door to the height (rotate clockwise) and down (rotate counterclockwise).

It turns to the vertical adjustment when the bottom sash when closing and opening the door turns about the thresholds, and when defects on the seals appear when closing the door and from above.

Frontal setting

Change the fit door to the frame using eccentrics located with the end part.

Or the method of adjusting the clamping mechanism located on the side of the canopies. If you shift eccentric towards the street, the door will be pressed more tight (winter mode). If in the opposite direction, the distance between the frame and the door will be more (summer mode).

It is necessary to change the position of all eccentrics equally by turning them all in one direction.

Adjusting the handle of the balcony

Door accessories on the balcony can be very badly rotated or breakdown.

In the first embodiment, the decorative lining and screws are spinning and tightened with a screwdriver. In the second case, you need to adjust the door. If the door was installed correctly, and the malfunction never disappeared, then it will be necessary to replace the fittings. This is done as follows: Two screws are unscrewed, an old handle is removed, and in return to it is new, screws are screwed back.

Replacing the wealth of the seal

Pay attention to the rubber seal.

Perhaps it is the appearance of cracks and cuts on it and causes severe drafts. Change the worn out material by buying a new seal in a construction store. Carefully look at the cross section and its shape. They must accurately coincide.

In order to extract the seal from the groove, as a rule, the tools are not required.

But if the material in some places is poorly removed, it is best to use a flat screwdriver. After that, it should be removed all the contaminants, apply the glue layer.

Installation instructions for plastic doors

Insert a new seal without a strong tension or excessive savory.

Preventive actions:

At the time of purchase, make sure that the closing mechanisms are able to withstand the weight of the sash.
During operation, avoid sharp jerks and other mechanical actions to the open door of the door. From the additional load, the door will eventually be saved.
Significantly extend the life to the sealer can be regular silicone lubrication.
After such treatment, the rubber will not stick to the frame in the winter.
Periodically, it is necessary to lubricate and the castle.

Any defect of the plastic door can be eliminated independently, the main thing is to know its device, the control principle, and have the necessary set of tools.

But this does not mean that you need to wait, when the malfunction will give yourself to know. Compliance with simple preventive measures will help significantly extend the life of the door design and avoid frequent adjustments.

The advantage of plastic doors is indisputable. They are beautifully isolated noise, do not miss dust from the street, do not lose weight, do not rot and do not rust. Plastic products are used on balconies, as interior partitions (offices, cottages), or even as the main entrance door.

The convenience of these structures in the variety of forms, colors and sizes. PVC doors can be practically under any parameters of the doorway.

Installation of products by employees of the company - the manufacturer will entail additional costs. To save during the repair process, try to install the plastic door with your own hands.

It is not difficult, the main thing to comply with the basic rules and act in stages.

Installation and installation of plastic doors

First of all, you need to prepare the necessary tools. You will need:

Door and set of details to her
Perforator
Drill
Mounting foam
Level
Sealant
A hammer
Roulette
Chisel
Nails, selflessness, dowel, screwdriver
Grinder machine

First you need to prepare the necessary opening to the installation.

To do this, clean the place of installation of products from the old plaster, to highlight the surface and remove the dust. Then you need to disassemble the doors.

If you ordered the finished door, the likelihood that you will take it in the collected form. For ease of installation, it is better to divide the door leaf and the box. It will help you faster and easier to install the door without help.

Then you should do fasteners.

PVC designs are mounted using special brackets that are fixed in the box intended for this on the other side of the box, from all sides they need to be installed three pieces.

Considering the thickness (in mm).

Installation of plastic doors: Subtleties and nuances of technology

door box, you need to put badges on the side of the openings, and install two stops (screws or dowels) in them). At the bottom it is necessary to set four stops so that the installation plane is specified correctly.

After that, transfinitely to the installation of the product.

Stages of installing plastic structures

Industry in the opening and climbing the dowels, driven upstairs.
The door box is put slightly under the tilt so that the edges are left at the edges. The distance on both sides should be the same.
It is necessary to prepare wooden wedges, hammer, perforator, fastep and level.
The level is put on the door threshold, we put the wedges under it, and we achieve an ideal horizontal position in the level.
With the help of the same wedges, the door must be tightly fixed first on top of the opening, then below.
The box is needed close to all born dowels that perform the role of stops. After the door frame was stable in place, it is necessary to check its location with respect to all possible levels. If there are visible defects, the location of the door must be adjusted.
After installing the box, you need to start to prepare the holes to install the fastener.
It is better to start from above, where there are canopies. First, the fasteners must be fully installed on one side of the box, then on the other. Make sure that the fastening elements do not have a door box, as a result of which it can move.

After performing all these stages, it remains to collect the elements of the door block in the opening, and ensure its sealing.

On the loop of the box inspired the door canvas.

If the door has an air function, two halves of the top loop must be combined with each other, then insert the pin.

Sealing in the opening. It is necessary to carry out it, closing the gap mounting foam. When sealing, you must perform a few simple rules. The door canvas must be kept closed, before the foam dry completely. Apply a foam only on a moistened surface. This will provide better grip, also, moistened sealant quickly and qualitatively.

Also, you need to carefully control the uniform filling of the foam of all seams. It is best to use a sealant that has a slight increase in pressure during frost. This will eliminate the deformation option of the door frame racks.

As you can see, the installation of a plastic door is simple and quickly, the main thing is to try, and everything will turn out.

Balcony doors, as well as windows, are among the designs that protect the dwelling from the outside world. And requirements for them are to protect against noise, drafts, cold air and other calls of the external environment. Plastic doors with accessories, which are used for windows from a similar material, make these structures very similar. One of the advantages of this choice is to install a balcony door from PVC is a simple process.

Plastic door to the balcony prefer because:

The tightness of the design gives its noise protection properties.
Dust from the street does not enjoy the room with closed doors.
Allows saving energy consumption, due to high heat insulating indicators.
Convenient ventilation system.
It has aesthetic appearance.
Relatively small cost in comparison with similar wood structures.
A wide selection of color solutions, which allows you to choose a block without disturbing the existing style of the room.
The ability to choose a design with the desired degree of insulation and protection against ultraviolet.
Long service life.
The moisture resistance of the design, does not swell and does not rot.

The disadvantages of plastic balcony doors include their insufficient ecology. Polyvinyl chloride from which they are manufactured is toxic material. But this indicator is manifested only with an increase in air temperature. Therefore, in rooms where extremely high air temperature is constantly maintained, the use of similar designs is undesirable.

Types of balcony doors of plastic

Depending on which it exists under the door to the balcony or loggia, choose a type of construction:

Possible options:

the plastic balcony door is between two windows,
windows in the design to the right of the door,
the windows are located on the left of the door.

Preparatory work

If you have a solution to install a new balcony door, then this event begins with the preparation of the plan - as it should look like a wall with a balcony door after the change that it is necessary to do for this. You can upgrade the design within the framework of the existing loop or change the work under the fresh idea. Purchase the door block to the balcony of the corresponding view.

If you plan to install metal-plastic windows, we recommend that you our article about. It presents all stages of work.

How beautiful to place the door on the loggia of the curtains we. Design Tips and examples with photos.

Usually after repairing the window and the windowsill need to wash and clean. And since the contamination is specific, you need to know what to do with this. There is here.

Doing a dismantling of an old design. The door is removed from the loops. The box is cleaned with the assembly lone. Sucks moisturize to be less dust. Footprints of the solution, mounting foam or other influx are knocked. If the PVC design is dismantled, then the mounting elements are first removed: self-tapping screws, screws, plates.

What is needed for mounting

If you order the installation of the door to the plastic balcony in the firm that sells these structures, the wizards take about ten percent of the cost of the product. Installing the balcony door with your own hands save precisely this amount of monetary signs.

Instruments:

building level,
segment
drill or perforator
a hammer.

The balcony door can be an independent element or as part of a complex design in conjunction with the window block.

The kit includes:

box
canvas doors,
accessories,
threshold.

You will need:

mounting foam,
fastening elements: self-tapping screws, dowels, anchor plates.

IMPORTANT: When purchasing anchor plate, please note that they come to install the specified type of metal-plastic design.

They are different for single-chamber and two-chamber windows. Their number is determined by taking into account the approximate distance between them at seventy centimeters and from the edge of the box - fifteen.

Step-by-step installation instructions

The installation of the PVC balcony plastic door begins after the preparatory work and the acquisition in the metal-plastic design in the store.

Tip: For a balcony door, choose when purchasing such a design, which opens inside, especially if the balcony or loggia is narrow.

Device threshold

Its structural parts can enter or follow the threshold to make themselves.
The design of the threshold is made from the profile that the door itself. Its structure allows the door frame to fit tightly to it, which ensures the required tightness of the mounted design. The height of the finished is about six centimeters. Usually in the apartments, the place of access to the balcony is above the floor level. If the result is an uncomfortable threshold height, more than I would like to have, the door threshold on the loggia can be slightly burst.

Installation of the door box

How to install a balcony plastic door and make it right? For this separated box from the door canvas And produce its installation in the opening. Task: Mount the box, strictly focusing it vertically and horizontally and at the same time observe the technological gaps between the design and the discovery.

If on some side, the opening consists of a wooden bar, a box attach to the opening with copperUsing screwdriver. In order for the side of the box at the fastening site, a temporary reference block is inserted on the side of the work. If the wall of the outflow of a fragile material, for example, foam concrete, then the fastening of the box to the wall occurs plates for mounting. In this case, each plate is fixed by several self-draws, thus distributing the load.

Sealing junctions

The jokes close up by the mounting foam in three receptions. For better clutch with the surface, it is moisturized.

At first, the cartoon tube is immersed in the gap on the middle of the depth and pass throughout the perimeter, filling the part of the void. Movement in the side parts are taken up.
Then fill the gap from the inner and outdoor side.

After soaring the mounting foam, the surplus is cut off by a segment knife. On the slice of foam will be seen how high-quality sealing is made. If the removal of excess, made a waiting for the full polymerization of the foam, then there will be no emptiness and shells on the cut. Sub-quality sealing may not be reduced to no positive effect of applying metal-plastic structures. Installation foam with voids can be wrapped and thereby degrade the heat-shield properties of the structure.

Installation of the door leaf

Box and door leaf screw loops. With them, the canvas joins the box. Last bar - installation of fittings.

About, you will learn from our material.

It will not be limited to one door installation and you will also need to configure it correctly. - This article will help you to do everything as high quality and without more effort.

mosquito net

When installing a plastic door to a balcony, those designs are very won, where additional part is provided - mosquito net. It is attached to the box from the outside of the balcony on the hinges. Design: Small grid in the strapping profile, in size duplicates the balcony door. Tightly closes, which is promoted by magnets. Opens towards the balcony, has a small comfortable handle from the outside.

How to install the door to the balcony is demonstrated in detail on the video. Recommended for viewing.