Paul from wooden sleeps with their own hands. Wood Sports Paul - Trend Option of Finishing, Available For Single Montage Section

What you just do not make out of the spikes of a tree. Casual tracks, shelves, countertops, interior decoration and much more. Use the sleepers instead of floors in a residential room that's what our author decided to make.

Materials and tools
dry logs of different diameter;
a circular saw;
grinding machine;
liquid Nails:
tile grout;
polyurethane varnish for wood;

Of the dry logs of different diameters on the circular saw, there was a breaking of approximately the same thickness.

Using the grinding machine seals each speech.

Prepared the basis of the floor by removing the old coating. Under the bottom there was a concrete screed, which facilitated the author further work.
Next, it is laying the sleeper as close as possible to each other.

Empty space fills smoother solid, branches.

Having all the area with liquid nails fixes each spice to the floor.

Having waited when the glue dries the author with a grinding machine levels and grinds the floor. The floor should be smooth and smooth.

Grouting for tiles raises the gap between the sleeves.

Having waited for complete grout drying covered floor polyurethane varnish for wood. Varnish caused so that he would hit all the clicks. Polyurethane varnish is applied in 3-4 layers. After the lacquer is drying, the floor of the wood spil is completely ready.

Natural materials in recent years have become increasingly popular in interior design. Wooden elements of the interior decor can serve as an excellent addition for any interior, as well as the basis for creating an original style.

One of these decorative elements are spiles of wood, which are used both in the garden-park architecture for the paving pedestrian tracks and as an outdoor coating in apartments and houses. Consider how to make the floor of wooden sleeps in the residential room.

Pros and cons of the floors of sleep

Any natural coating has a number of undeniable advantages over artificial.

As for the coating of saws of wood trunks, the situation here is not entirely unequivocal.

Consider more all the advantages and disadvantages of this design so that you can make the right choice.

Ecology

One of the main advantages of any natural material favorably distinguishing it from plastic, PVC or other polymer. Natural materials practically do not contain toxic components that could cause damage to the body.

A tree in this sense is one of the most harmless materials that can be used in any residential room - from the hallway to the children's bedroom.

Cost

Trimming Commels have a unique pattern

One of the indisputable advantages of such floors is the low cost of the source material. Indeed, Comel trimming almost free of charge can be selected on any sawmaker or woodworking factory. At the same time, the sections of Comer sometimes have a very intricate texture that gives the flooring of them a magnificent decorative look.

Speaking of low cost, we, of course, do not mean the exclusive types of wood - Ginkgo, Ebenova, Wenge, etc. But also quite affordable pine, birch, alder or larch can give the internal interior of your living room or bedroom an irresistible look.

True, the picture slightly spoil the additional components used in the construction of floors from cutting stems. This is usually epoxy varieties of self-depleted bulk floors.

Such formulations refer to one of the most expensive floor mixtures and are used to create floors with a 3D effect.

You can, of course, apply cheaper options for bonding sleep, for example, a mixture of clay and sawdust, but such floors will not be equally durable in operation, and the aesthetic effect in this case will not be at all.

If you consider a coating of wood cutting sort of "cheap and angry hand-maid", then you are deeply mistaken.

To create a truly magnificent floor of the end trimming of wood trunks, you need to attach a lot of effort, financial assets and time. About the time spent on creating such a design, I want to say especially.

Mounting speed

To pick up and decompose in the correct order round dies will take a lot of time

Wood cutting cannot be called quickly mounted. To put the floor of the spikes of the tree with their own hands, you need to have enough free time.

It is literally for each stage of work: on the preparation of cuts of the desired thickness, on the laying and fixing them on the surface of the floors, on the pouring of floors by epoxy solution, so if you are experiencing a personal time deficit, then it is better to pay attention to another faster option of the floor covering .

Aesthetic component

But if you still find enough time and finance in order to qualitatively mounted in your apartment floors from cutting stems, you will receive a unique flooring in your aesthetic effect. For the cost-effective coverage, see the video:

Glossy floors lined with wood "hemp" will win in conjunction with any elements of the interior decor - from wooden wall panels and furniture to wallpaper with floral ornament.

Spil preparation

Achieve the same thickness of sleep, otherwise the floor will be uneven

You can prepare wood-free thickness with your own hands. To do this, you need a gasoline or electric saw and a blank in the form of a tree trunk or trimming of a woodcut.

Thick branches and trunks of thin trees will also go into business. They will be able to fill the space between wood-haired diameters. You can drink them on your summer cottage or household plot.

Such trimming can also be ordered on the saw

All end cuts must be the same thickness to avoid situations with a traumatic "hemp" at the overall flooring.

If you do not have such an opportunity, then the desired cuts can be ordered for a certain amount of working on a sawmaker or woodworking plant.

Recently, decorative wooden spiles can be found on sale and in some building supermarkets.

When choosing a thickness of the height, it should be remembered that it is precisely for such a magnitude that the height of your room will decrease, so you should not do too thick sleep - the recommended thickness of wooden "pancakes" is about 3-5 cm.

Solid rocks will serve longer

Thin thin cuts are extremely fragile and inevitable by their damage during operation.

If there is a possibility of choice, in the manufacture of cuttings, preference should be given to more solid rocks of wood - larch, oak, nut, accrete.

Of course, such wood is more expensive than pine, alder or birch, but also the life of the flooring will be longer.

The table is given classes of solidness of various tree species.

Wood for cutting need to take well-dried, as wooden buzzing from raw material after laying on the floor can start cracking, and this will spoil the entire appearance of your decorative floors. Detailed instructions for the manufacture of sleeps are presented in this video:

Before sawing trunks, it is not necessary to clean from the bark. This is usually done to remove the larvae of various treasures living under the crust. But in the case of the fill of floors, the polymer composition is unlikely to survive, and even more so eat wood impregnated with epoxy resin.

It is necessary to remove the bark if you are going to fill the gaps between cutting with clay mortar.

Spilov processing

After the required number of end cuts is harvested, they should be treated with antiseptic material. This will prevent the development of fungus and mold on the inner surface of wooden weakly and inside them. About how to treat products with hot oil, look at this useful video:

If, on the project, the wooden surface of the cuts will not be closed on top of the bulk floors, it will not be superfluous to treat it with impregnation from insects and antipirens to reduce the probability of fire.

Preparation of the base of floors

The old base is delivered from the bugs, close the cracks, cover with soil

The next step is moving to the preparation of a rough base of floors and laying sleeps. The base surface must be practically perfectly smooth, no holes and bugs. Otherwise, it will be difficult to achieve an ideally smooth surface of the decorative coating.

With the help of a construction level, a smooth metal profile or a wooden rail, we check the entire surface of the floors. In the right places, we remove the bumps with a grinding machine or a kicker, and the pit fill the plastering solution.

If the rough base is too uneven, it will be easier to fill in its entire area leveling screed.

To protect wood from moisture contained in concrete floors, the floors are littered with rolled waterproofing materials or are cooked with water-repellent mastic.

Laying of sections is the main part of the work on the device of decorative floors, similar to the layout of the mosaic. There are several technologies for laying wooden sections on the prepared surface.

With fill with self-leveling mixtures

First decorate the largest sections

This option is best suited for creating noble flooring for apartments or country mansions.

Drinks are laid out all over the field of floors. The layout is better to start with the largest cuts, leaving the space between them for smaller elements.

After that, fill the gaps with small cutters, which allows you to diversify the overall picture and save on the consumption of such an expensive material as bulk floors.

Kreagoli can be laid directly on the waterproofing without additional attachment: after filling with epoxy solution, all elements will be laughed in a single monolith.

After completing the layout of the end sections, we proceed to the pouring of the floors with an epoxy self-election mixture.

For a larger decorative effect, it is not entirely transparent, but a slightly darkened epoxy bulk floors.

Switch to a mixture with a wide mop

We drag the mixture in accordance with the instructions and pour over the "hemp" so that they are slightly closed (by 0.3 - 0.5 cm).

Since the bulk floors have increased fluidity, their equalization will not cause their special difficulties. To do this, it is enough to use a wide construction mop.

Laying on sand

If the thickness of the available wooden "pancakes" is different, then for ease of alignment, you can apply coarse sand. The laying technology in this case is similar to the laying paving slaves. A layer of sand in 2 - 3 cm is poured on the draft floors, and the cuts are stacked on top of it. On how beautiful to lay flat sleep, look at this video:

Aligning them in height is performed using a construction level and a rubber hammer, which the protruding elements are plugged with the strikes.

Filling the seams of clay-lime paste

This option is the most budget, since it is practically not used expensive purchased mixtures.

Laying of sleeps in this case is performed on the layer of plywood, to which they are glued with the help of glue (PVA, "Liquid nails", etc.).

Then I prepare a solution consisting of 5 parts of sawdust, 2 - clay, 1 - lime and 1 - melted fat or vegetable oil. This mixture fill all the gaps between "pancas". As a final barcode - cover the surface of the sections by the mourn and varnish.

Floors are an important coating in any room that can be created from different materials. Wood is environmentally friendly and attractive. Therefore, the floor is often formed from their own hands. It will not require the attachment of numerous funds, and is also considered easy to create.

Features of such a floor

The floor of the spikes of the tree with their own hands in the photo looks attractive and interesting. Its creation involves the use of special "worst", the thickness of which is equal to several centimeters. They are formed as a result of transverse saws.

Due to their proper laying on the base, the creation of a bright, beautiful and unique surface on the floor is ensured. To fasten the coating, fill with different liquid materials, polymers are most often used for this.

Pluses of

The floor of the spikes of the tree is created simply, and at the same time he has many advantages:

an environmentally friendly coating is formed;
it is possible to make the floor with minimal waste of money;
you can use different unique features to create a unique design, as it is allowed to use the sleeves from all kinds of logs, which may have different or similar fragments;
elements are distinguished by shapes, colors or dimensions;
such a decision is considered original for each house or apartment;
the floor of the spikes of the tree makes it easy to make it easily, which significantly reduces the cost of creating the coating;
the floors are considered universal, so suitable for any interior and style.

Some people are preferred at all to use cracked logs, at the expense of which the charming coating is obtained. But it is necessary to use solely logs in which there are no signs of diseases or rotting.

disadvantages

There are some minuses from such a floor. It is important to choose fragments that have the same thickness. If errors in technology are made, it will be the reason for the creation of floors that do not have high strength and durability.

What logs can be used?

Not all items are suitable for this process, as some requirements for them are taken into account:

too soft logs are not used for the procedure;
it is important to pick up the sleeves obtained by treating solid rock wood;
spiel ate, pine or aspen, not suitable for these purposes, so the optimal choice will be a nut or oak;
the financial capabilities of buyers are also taken into account, as natural wood is expensive.

If you use expensive wood rocks, the design will last long and will look luxuriously.

How to make the floor?

The floor of the saws of the tree with their own hands is stepdown simply and quickly in time. For this, sequential steps are performed:

the procedure is made similarly to laying paving slabs, so initially it is necessary to carefully prepare the base, which should be well rambling, smooth and solid;
from above on it, a layer of river pebbles is placed, and its thickness should vary from 6 to 10 cm;
next, the spins are immediately styled, for which they are adjusted using the rubber hammer;
it is important to constantly check the correct location of each element by the level, which will avoid the presence of distortion and other problems on the coating;
there remains a distance that does not exceed 1.5 cm;
then the seams are filling between the elements, the mixture can be purchased in the finished form or do it yourself using clay, swine fat, lime and sawdust;
often selected polymer compositions with high quality;
the mixture is introduced into the seams that are available between the sleeves, after which it is good, it is important to make sure that there are no air pockets, and if emptiness remains, they can cause cracks or penetration under the floor of the water;
the procedure for filling the seams is repeated in two days.

Thus, according to the correct technology, the floors of the wood spils are formulated very simply, and at the same time it turns out a high-quality and attractive design in any room.

What to do after creating a floor?

As soon as the floor of the woods of the tree will be made, it is necessary to polish it well. It is optimal for this to use the squabble machine, and after grinding it is necessary to check the coating for cracks. If they are absent, then at the end, manual grinding is done. After drying the floor, its polishing begins, for an environmentally friendly coating, it is better to use wax or linseed oil.

Spille floor is considered an interesting choice for any room. He has huge advantages, although he has disadvantages. It is considered easy to create, therefore, at the expense of its own efforts and small financial investments, it is possible to obtain the original and unique design on the floor.

Natural materials are appropriate in different landscape design styles, therefore, among the variety of all sorts of country tracks, fasteners are often found. If you decide to make a path from the boards in the garden, the wooden floor on the terrace or the track from the woods of the tree with their own hands at the cottage, see the photo of possible options, study all the stages of the preparation of the site and wood, methods of laying a tree and the peculiarities of the coating.

Where to get a spike of wood

Comfortable and beautiful passage on the lawn

What attractive materials made of wood

The attractiveness of the materials made of wood for the construction of cottage "ways of communication" is caused by:

Availability. Of course, the prices of wood will grow up, but the cost of wooden tracks remains lower than that of stone coatings, clinker bricks, paving slabs. In addition, you can put in the case unused when the construction of buildings on the cottage lumber and the fallen trees on the site.
High decorativeness. The unique texture is beautiful in itself, it allows you to create a unique coating with a copyright design.
Easy work. The construction of wooden tracks does not assume the presence of special theoretical training and special practical skills. It is enough to be able to use a saw, shovel, hammer.
Ecology. Natural material is safe for health, perfectly harmonizes with the environment, especially popular among eco-style fans.

The natural decorativeness of wood - each cut has a unique pattern

Disadvantages are also present: the paths from the tree are not too durable, are subject to invasion of insects, fungus, mold. Nevertheless, it is possible to use them from 7 years to a quarter century, depending on the type of wood. However, this requires: competent processing of blanks to laying, the correct installation and a reliable base arranged in all the rules.

Tree is perfectly harmonized with the environment.

Preparation of the base for the capital

In order for the garden trail to be missed, did not fail, did not bother weeds and eventually did not crumble in the coming year or two, for her it is necessary to prepare a reliable bed (foundation).

Marking of contours of the path

This is a simple, but enough labor-intensive occupation is as follows:

On the territory to outline the boundaries of the track with the help of a cord stretched between the knitters. On the bends of the track, the pegs are often located, with an interval of no more than half a meter (depending on the radius of curvature), and on the straight portions, the pegs can be driven through 2 and even 3 m. Denote the contour of the winding path can also be sand, chalk powder, lime.

If you plan to install borders, it is planned to provide an appointment with the width of the bed.

Within the markup, select the soil about 20 cm, controlling the depth of the resulting trench by a template or ruler. It is necessary to do it in dry weather: the rain spilled in a trench will significantly reduce the quality of the base.

If you need curbs, install them by setting up. Under the borders is desirable to add from the compacted sand.

The bed is tumped, to ax a geotextile or Pat film to protect against germination of weeds and prevent sending.

To be put on the bottom draining layer of gravel or rubble small fraction with a height of 4-10 cm (depends on the stability of the soil). The gravel and sand mixture can be used (9: 1). Carefully tumble with a rink, vibratory or manual homemade traam.

For some types of tracks you need to pour over the sandy pillow of the same height over the drain layer. It must be poured gradually, layerly, moisturizing and good tamping every layer.

The beginning of work on the preparation of the foundation

After that, you can start laying in the garden of a tree of one or another design.

How to lay a path of wooden sleeps

The advantages of using wooden sleeps (sections, slices, chumbachkov) As a material for paving the tracks, many daches and homeowners have already been rated. The trails paved with charming blobs allow you to comfortably move along the site, organically look among the green plantings, perfectly shake flowering flower beds.

Wooden spil trail emphasizes the beauty of greenery and flowers

Where to get a spike of wood

Finished spiers from various wood species offer many manufacturers. You can even purchase the prepared by the special compositions of the workpiece, which will only remain correctly mounted on the prepared base. This option is good when the budget allows.

However, if at least a glimpse to look into the prices, you can experience some disappointment. For example, untreated larch sections with a diameter of 30 cm and a height of 10 cm. Domestic manufacturer is offered for 150 rubles / pcs.

The uncomplicated calculation shows: the material for the 9-meter trail of 60 cm width will cost 9000 rubles. Excluding the cost of delivery and processing before laying. And if from the sideline, cluttering a plot, to make a tree of wood for a path with your own hands, the same path can be coated with a practically gift.

Production of sleep can be independent

How to make a speech do it yourself

Cheaper than finished sections, it will also be billets, dried independently from the acquired rounder. Tools for work will be needed:

petrol or electric saw;
roulette or pattern;
pencil or chalk for marking;
babel for Okurization.

The source material can serve any breed of wood. However, if there is a choice, then from coniferous breeds it is better to take a larch, pine, and from deciduous - oak, alder, hrybro, acacia. Tropicks from larch, oak will last longer. But you need to keep in mind that the wood of these rocks is complex in processing. The selected tree should be necessarily dry, otherwise the sleepers laid in the ground will be quit, crack down - work will go to the pump.

To make a speech, you need to perform such manipulations:

Clean the barrel from the branches.

Okractor trunk with a rigine or other tool. Perhaps someone will prefer to clean the bark from the bark.

Using a template to lay a log along on equal parts of 10-20 cm. The thicker is the trunk, the more height is needed. So that the sleepers securely retained in the track, to make them a height of less than 10 cm undesirable.

Disturb the barrel by tags.

Woods are ready

Cutting cuts with special compositions

Before proceeding directly to the laying of the Woodwood Walkway with their own hands, the chopped blanks must be processed to protect against insects and fungus. To this end, you can use:

special antiseptics, impregnation of deep penetration acquired in the store, applying them according to the instructions;
a homemade means in the form of a solution of copper sulfate (10-20%), in which the speakes need to withstand two days, then dry the same time in the shade;
retained almost to the boil Olif - it must be applied to the brush on all surfaces of the spell;
machine oil development - to apply like Olif.

The path from the "Aged" Wooden Speils

From the impact of copper vitriol, the tree quickly darkens. If there is a desire to achieve the effect of "aged" tree, such treatment is what is needed. With the desire to preserve the natural color of the material, it is more expedient to impregnating the oil. You can still take advantage of the ancient admission of residents of Taiga settlements - to impregnate the heap of a saturated decoction of the larch bark. It will give wood antiseptic properties and a pleasant red-brown color.

These sleeves are ready to lay

After drying the chumbachkov, it is necessary to apply a waterproofing layer on their lower part. For this, the bitumen needs to melt in the metal dishes and dip the bottom of the billets into it. This operation is unsafe: Cooking bitumen is not easy, and the temperature of the molten substance exceeds 200 ° C. You can use other methods of creating a waterproofing layer:

Bitumen briquettes placed in a metal container, pour gasoline, leave for several days until a diluted bitumen mass is formed. Process in it, as in a hot bitumen.

Cove the lower surfaces of Churbachkov Kuzbasslak.

Laying prepared chumbachkov on the basis

Breeding a stem speo track

Now until the moment when you can be proud of the wooden track made by your own hands in the country, it remains quite a bit. There is a fascinating, creative work on the installation of sleep.

Scheme device trail from sleep

To fully implement your idea, you must do the following:

While ready-made spins breathe after impregnation, to prepare the box under them according to the technology described above. Provide such a thickness of the rammed gravel-sand "pie" so that the top ends of the Churbachkovs are located in the surrounding soil or slightly opposed it. If curls are planned, their role will successfully fulfill higher spears, wooden fees.

Make sure the bed is smooth, using the level.

Start paving. Each element is installed in its place, indulging in the sand and aligning cautious tapping of a wooden or rubber hammer. Control by level so that all sections are in the same plane.

Share your chumbachk for any selected scheme: from the single-row trail from the solils of a large diameter to the track, tightly paved with saws of different diameters and configuration. It all depends on the performer's plan and the presence of blanks.

Flush the gaps between the sleeves with sand, the screening of rubble, small pebbles with the ground. Decorate such a wooden track sown between the spikes of the soil plants or moss.

Place the edge: decorate with a decorative stone, flood with rubble, gravel or just soil and good tamper.

Ideas for registration of wooden sleepwood paths you can learn, having considered the photo below.

Woodwood Care

To use the spell track for a long time, it will have to take care of it:

Annually consider the dirt with a metal scraper, then process the antiseptic, oil or (optional) with paint and varnish materials for external work.

Delete weeds in a timely manner capable of disrupting the base of the coating.

Do not allow flooding and erosion of the coating. For this purpose, special grooves can be installed on the paths or set the grooves.

In winter, the snow is in a timely manner, prevent the formation of a hang on the coating. It should be abandoned from the use of salt or other reagents to clean the ice, which contribute to the gradual destruction of wood.

Have such a floor prestigious

Wooden sleeping floors are stylish

Having a margin of material for cuts and gaining some skills to work with them, you can make an unusual floor of the spikes of a tree - it is now fashionable. Depending on what will serve as the basis of the floor, various ways of laying and finishing finishing of the floor covering can be used.

Ground-based wood sections floor

If you need a ground-based floor (say, for an open terrace), it is possible to build it exactly by the same script, like a track of sleeps. But there are differences:

Power must be made as thick as possible, applying the sleeves of different diameters.
The remaining gaps between the sleeves do not need to fill with bulk materials - they should press the prepared mastic (about it just below), aligning the surface with a rubber spatula.
After drying the mastic and solidification of the surface, it is necessary to go through it in a squash machine. Then carefully remove the dust and polish the floor with linen oil and wax or apply a parquet polyrolol.

Preparation of mastic:

Two kg clay.

Mix it thoroughly with 1 kg of hazed lime.

Add 1 kg of technical fat and 4 kg of small sawdust.

Stir until the homogeneous mass is obtained.

Laying sleep on a solid base

"Eternal" floor of wooden sleeps

The option is not cheap, but a truly durable floor mounted on a solid foundation. At the same time, the height of the sleeps styled onto a concrete screed or an old wooden floor can be significantly reduced. For such a floor it is necessary:

Align and clean the base.

Apply a polyurethane bulk floor to a small site of the foundation. Madely put wooden slots on this site. By the way, the greatest laying density will provide cuts made from bar residues.

Go to the next site, repeat the previous operation.

After gluing the sleeps throughout the base, wait for the solidification of polyurethane and embed the seams with a mixture of polymer and sawdust.

Dried gender to treat grinders. Remove dust after grinding.

Pour the finish coating of polyurethane.

"Parquet" from end spins timber

Paths from lumber - simple and inexpensive

If the process of the workpiece and laying of sleep seems too complicated and long, you can quickly and easily build a variety of wood paths for the garden, using ready-made timber: boards, timber bar. The most memorable option is a shield flooring that does not require labor-intensive preparation of the foundation.

Wooden garden track

For such a track, planed cutting boards of the same thickness (preferably equal width) will be required, wooden bars, hacksaw, hammer, nails. The procedure for making flooring:

Place the path, align the soil on the path of passing the trail (pumped up the holes, tamper, cut the tubercles).

Split the timber on the length of the length equal to the width of the path. Boards thawed.

Impust the boards and bars with antiseptic, dry.

Treat the bottom of the boards and each surface of bars with bitumen coating (or covered with Kuzbassslak), give it to frozen.

Bruks to place on Earth with an interval of about 1 m, to pinch the boards to them, hacking the hats of nails. Nails are better to use galvanized. Between the boards leave the gap to 5 mm for ventilation and water drain.

Shields to sew among themselves with the help of the same bars. Joints to handle emery skins.

Color the path, applying paint for outdoor work.

Step track from boards and gravel

Another design of the wooden track for the garden, easy to execute and does not require solid costs. For her you need:

Prepare the basis of the above technology. But there is enough trenches with a depth of 5-7 cm, covered with a riding sand-gravel mixture.

From the boards (timber) to heat the length of the length equal to the width of the track. Treat them in the same way that was used in the manufacture of shields.

Place boards along the base length with an interval in a short step, push into the backup, paint.

Floiled from the board

As you can see, it is not required for creating simple, but spectacular tracks from wood with their own hands and skills. Consider the recommendations, take a look at the photos, turn on the imagination and decorate the territory in the country with peculiar paths.

The floors are currently separated by the most families. However, in the overwhelming majority it is a laminate or linoleum. People with money can also use a parquet board. However, how about a much more interesting version of the finishes, which will surprise everyone who stops on such a floor? It is this option that the floor is from the spikes of a tree whose popularity is growing with high rates.

Transverse cutting logs leads to the appearance of a rigle, a thickness of several centimeters. It is them that we will lay on the floor, creating a unique surface. To secure the result, a fill is made, which can be the most different. A bright example is bulk floors. By the way, in this way, not only floors can be created, but also a variety of interior details, ranging from wall decoration and ending with countertops.

Advantages of floors of wood

Such floors are most eco-friendly;
Extremely low rates. The material for finishing can be found literally under the legs. The only condition is the smooth thickness of the fragments;
Rich opportunities for design. You can use spikes from thick logs with a pronounced layer of the cortex, you can use the same fragments or different in the diameter, or different, to create an underlined irregularity of the pattern. Fragments may differ not only with dimensions, but also forms (spins of timber), as well as flowers. All this opens the widest opportunities for design. Even cracked logs can be taken into dealing, bringing their visual charm;

Important! It should be understood that the logs containing signs of disease should not be used.

The original approach that will be able to surprise is still very and very long;
Universality. This method of finishing can be used not only for the floor.

Unnecessary shortcomings

Those people who are engaged in such floors argue that the process is not at all as folded as it seems. But here it all depends on the size of the fragments and the floor area. Sometimes you can take quite a long time;

With good pouring and processing, such floors are pretty strong structures that do not need additional processing. However, in case of errors, such a floor can deliver a lot of trouble. Therefore, the requirements for attentiveness and compliance with all rules here are very high.

Does your logs fit in such a role?

In fact, in addition to the "painful" logs already mentioned above, they are also not suitable for those that have too much softness. Try to pick up a tree from solid durable rocks. If we take specific examples, then soft woods such as spruce, pine, fir, cedar, aspen, linden, poplar. They are better not to use. But the oak or walnut is suitable for this just right.

You need to focus on your financial capabilities. After all, such floors can be not only cheap, but also quite expensive if the workpieces you buy, but do not do it yourself, and also if expensive wood species are used to finish the floor.

Installation of floors for plywood base with glue

As part of this method, plywood sheets are stacked on the floor, the thickness of which should not be less than 10 millimeters. At the same time, the fragments themselves are better not to do too thick, especially if you have low ceilings in the apartment. You can get thin cuts using a tape saw capable of processing wood very accurately.

The logs in this case are stacked on the construction glue, and, after drying it, it is best to close the seam with a solution having the following recipe:

5 kilograms of sawdust;
2 kilograms of wet clay;
1 kilogram of fat (you can use the same amount of linseed oil);
1 kilogram of lime;
Marble dust. It is added if it is necessary to provide semi-resistance to water, as well as visual reasons.

Usually after this surface is given to dry for about two days. As soon as the gap for the gaps hardened, it is necessary to carry out a grinding, and on top of the lacquer, a transparent sealant, or a mixture based on an epoxy resin, having a self-leveling function (the above-mentioned bulk floors, often used in non-residential premises).

Laying the log on the surface of sand

It should be started with the fact that the area of \u200b\u200bwork is limited, after which the surface of the floor is covered with the sand of river or maritime origin. The sand layer should be a thickness of 5-10 centimeters. So this approach is relevant more for apartments with a fairly height of the ceiling.

Further, in fact, the process of laying a log surface begins. Laying should be carried out by the method of severe indulgence of fragments in the sand base. At the same time, you must try to work on the level of laid logs to be approximately the same.

Regarding the way that it is precisely to carry out the laying - one can focus on the floor covering tiles. Someone starts from the distant viewed angle, someone from the threshold, and some do it from the middle. Be that as it may, on the sides of the floor, we usually cost plinths that can hide irregularities. In addition, using options with different diameters, you also unleash your hands the opportunity to fill in the "trifle" edges of the floor. Of course, without mounting can not do, so cook also a drink.

As soon as everything is laid, we turn to the step of filling the emptiness of pasta, the composition of which was voiced in the previous method. The ending work is identical - fix the design of the bulk floor, or choose the polishing with natural bees wax or linen oil.

"Monetary" alternative to Spila Log

Along with the tendency to lay fire fragments, the floor from coins also acquires greater popularity. Work in this case is much more, but the visual is sometimes striking the imagination. We will talk about this method of finishing the floor in one of the following articles.