Handle handle in hand. Manufacturing a wooden handle for hacksaw how to make a handle for manual hacksaw

In this plot and we will collect a simple, but very useful, multifunctional tool. Presented the idea of \u200b\u200bhandle to hold the appliance, pink or other similar small tool.

If there is no lathe or familiar turner, then the blank made of brass with a diameter of 12 mm. You can easily clamp in the cartridge drill and drill a central channel. The outer turning can be carried out with a file.

Now in the side wall of the workpiece it is necessary to make a slot. This can be done both bormer and Bulgarian. If they are not, then you can take a hacksaw and put several cloths. The wizard has a milling machine.

In the holes it is necessary to make a thread M4. The initial carving master inflicts the usual Mercechik. But he is too long. Therefore, it will have to use short for deaf holes. It is pursued from the wreckage. Such a job easily can be performed using a drill and a rashpy file.

Hydrocellulose varnish is well reduced and the last stroke in this picture will shortening the cogs under the hexagon.

The device is fully prepared. This is a multifunctional handle. It can be fixed with a diverse tool that has a circular base with a diameter of no more than 4 mm. If you plan to make yourself such a thing to use together with the noodles, then the side slots can not be done. Just just one screw.

An option to use the handle with a drill is suitable only in cases where there is no normal drill. And that, only for soft materials such as plastic or wood.

Diamond hammers for bormers are of different types and sizes. With their help, you can straighten with a small abrasive pebbles under the desired shape and sharpen the tool. The width of the slot is about 3 mm. It is needed to secure a tool with a flat shank. Such a canvas for the electrolovka is designed for cutting various soft materials, when the cut is not direct, but curvilinear.

The hacksaw blade for metal is much thinner, so it will be much easier to cut. Pay attention to the severity of the canvas.

If you use the device only to fasten the legs, it is perfectly suitable for a knight with a knocker. It speeds up work because you do not need to look for a key or screwdriver.

The master has always enjoyed the scalpel, but never applied a maquet knife. I tried to sharpen the cloth.

Such nozzles can make a huge amount. What pleases forms and sizes. If you make a bigger tool, you can fix full-size files.

Many home masters from time to time are interested in the question of how to make a beautiful and comfortable handle wooden for the used file. First of all, it is worth noting that it is better to take such woods such as a patterned walnut, and a suwellaneous maple is suitable. This is quite strong materials that are characterized by an attractive texture, high strength indicators, they also contrast optimally.

Pen for a file.

In addition to the competently selected tree, it will be necessary to prepare materials such as plastic and brass. For connecting parts it is better to use a special epoxy glue. It is not necessary to cook a file, as the work is carried out with the tool already used in operation. When solving such a question, how to make a tree handle, a file may be required only with the final work.

Preparatory processes

If the prepared billets are made of nut or maple, then the tree knob is cut for them with a hacksaw. You can also use a conventional electrolovka or a small disk saw, which is equipped with a special planing disk. These tools give the most smooth cut, which will greatly facilitate all subsequent processing.

Important! In the process of sawing, it is important to choose the right angle in relation to the fibers of the tree. This will help get a beautiful texture on a cut.

All obtained billets are thoroughly polished on a special grinding grid or using the use of sandpaper. When carrying out this process, special attention should be paid to a thorough fit of two billets made from the tree relative to each other. This is not a wooden shovel, where the handle is performed from one whole element. They should be very smoothly lay down to each other without forming any gaps. If the edges are a bit loosely connected, it is not scary, since with subsequent processing everything can be cut off.

Drawing handle for a file.

After that, the blade is taken with pre-molded on it to him, the shank is superimposed on the billet from the tree and everything will be bored with a pencil. Then with the help of a conventional carbon, the markup is transferred to the ends of the finished parts, it turns out the finished handle for a wooden or tap for a bath.

As soon as the hole for the shank is completely locked, you can start the drilling process. To do this, it will have to measure the thickness of the shank and select the drill exactly of the same diameter. When working at home, the drilling process is better carried out with the help of an electric drill, having previously closed prepared blanks in special videos. Thanks to these actions, you can get two parallel holes, between which the thin partition is formed.

It is possible to remove it by means of a file or a special tool - the appliance, which, in the implementation of this process, it will be necessary to carefully check the degree ratio of the axis. For this purpose, it will be necessary to put the blanks on the shank and pulling them from the right sides.

Build construction

The subsequent action is to prepare a package of all necessary details.

The sequence of them should be as follows:

• File;
• Suwel;
• Brass;
• Wood.

When assembling such a design, it is important not to forget that special gasket made in each compound are laid, the same device as a bath for a bath.

Important! All the details of the handle must be very tight and without gaps to lay down to each other. This is important, as it affects the overall quality of the gluing and the future aesthetic attractiveness of the product.

File.

Adhesive work

In the process of gluing the main structural elements, it is recommended to use your epoxy glue. Mixing it is carried out on the basis of the instruction, and to give an attractive color shade of the composition, a small amount of black toner can be added to the glue, which is used for conventional cartridges. There are several rules for gluing the future design:

All necessary parts need to be prepared in advance, since the cooked glue can work no more than an hour.

Each item must first be carefully degreased. For this purpose, it is possible to wipe it with ethyl alcohol.

In the process of missing blanks with glue, it is important to ensure that it penetrates well into the billet hole made of wood.

After processing the parts with adhesive composition, the set is firmly clamped in pre-prepared vice and is located there until completely drying the glue. As a rule, the day leaves, and the end of the drying process can be judged by solidified drops of glue. If this is a crane for a bath, you need more time. After that, all planes are thoroughly aligned with a file.

Final Actions

The glued handle is required to carefully sharpen to give it the necessary shape and neat appearance. This is a rather responsible and long-term process that requires patience and perfection. For this purpose, you can use wood hacksaw if the form is as close as possible to the correct or hacksaw on the metal, if the layer of materials intended for erasing is quite large.

The final form is given using a file or simple emery paper. The finished handle of the file is impregnated with clean oil on a mineral base several times and then the product is covered with a layer of wax carnab. Processing by this composition is necessary for the reason to protect the wizards from obtaining wounds in the form of a basis, for example, if it is a bath for a bath.

This technology is universal, it can be used if a wooden shovel is required, a holder for a sledgehammer or a different product with a wooden handle. A tree handle made with your own hands can be made as quickly as possible and simply, if you follow the instructions presented to the attention and execution tips. As a result, a product is obtained, thanks to which it will be convenient and very comfortable to work with a file, it will be possible to perform any pleasing products from different wood species - a handle for a sledgehammer or a tap for a bath.

Video: Faille handle manufacturing technology

Very often, during operation, it may be out of order as a web for metal and the handle-holder itself. Make in the workshop conditions mini-hacksaw for metal is very easy.

This will require an old diamond disk on the stone. It will also be necessary to prepare a grinding tool (USM, Greender, Bormashinka), a drilling tool, electric jigsaw, a pair of wooden bars and several pieces of copper reinforcement.

First of all, it is drawn to the future housing of the hacksaw on a piece of paper and glue it to the disk. Carefully on the contour cut out our workpiece. Grind all sharp and sticking edges in Grinder.

The main stages of work

After that we apply a metal blank to the wooden bars prepared in advance, and supply the contour of the product. Cut with a logs with a wooden handle.

We collect a hacksaw, using epoxy glue and pieces of fittings. Next, grind the overall surface to convenient retention in your hand. Covered with mineral oil.

After that, we insert the cloth into the groove and fix with the help of a bolt and clamping nut. A detailed device and manufacture can be viewed on the video below.

WATER WORK WORK Handle for its own tool makes themselves: no matter how good the factory handle is, it is made by the template of the average brush.

To make a handle "By yourself", you need to remove the surface of your own brush on soft clay or plasticine, slightly squeezing with your fingers. Usually, the handle makes a multilayer plywood imposed on each other, but the handle from the solid piece of the soft rock tree is much better and, despite the softness, is not inferior in the strength of the plywood.

1-2-3-4-5 - We begin to stake

First of all, prepare the oven board 1 of the required thickness, apply a drawing of the handle 2 to it so that its fibers are located along, and not across the cutting canvas. Cut the extra part of the blank along the edge of 3 drawings. From the end of the cropped side, do a circular saw 2 cutout 4 of 4-5 cc. Insert the racks lubricated PVA 5 in them and hold one day in vice. After drying, cut the workpiece
6 over the line, make a cut 7 to the depth of the canvas. The width of the cutout does not matter, because With 2 sides of the canvas will be inserted gaskets.

Hold on, canvas!

If there are no holes in the mold in the canvas, and you plan to change it to periodically, they can be replaced by longitudinal cuttings 8, making them emery.

The width of the cutouts should correspond to the fastening bolts for the constant fixation of the canvas
sat propelled 9. Use rivets (even aluminum) can not - wood can split. Their role will be performed by bushings 10, the length of which is slightly smaller than the thickness of the tree, so they will additionally need the washers 11. The sleeves can be cut out of a thin-walled tube or make a fastener.

Pen surface cover PVA glue, and after drying it - varnish. So that the handle does not "twisted" before using color varnish, cover it with 1-2 layers of the zapon-varnish.

Yusup Gelazov
According to the newspaper "Different. Make yourself"

• This is a simple, stylish and durable connection can decorate any frame: from the facade frame of the cabinet to the frame for the photo. Some connections are performed using machines, others manually. Combine both
• Old door handle may fail for two reasons. A quadrangular rod extended through the door, or permanently hold onto the rod rod. In both cases

He pays a lot of time to his instrument, which comes out not only high quality, but also damn beautiful. Real works of art.

This time he took up the Soviet hacksaw, which he acquired on the collapse. Its initial state was far from the perfect. But the quality of steel, from which the fabric was made greatly wins compared to modern Chinese.

The old handle was mercilessly thrown away, and the spinal teeth, since the middle was pursued, which led to the bending of the cutting part of the canvas.
A piece of the canvas had to cut off - the feeling that nails ruled on it - so she was remembered.
. The dents were frozen and smoothed by sandpaper on the bar, as well as abrasive lumps. It is desirable to grind "on wet"., That is, wetting the grinding surface with water.

As a result, it turns out such a brilliant blank for the web. It will need to be trimmed under a new handle, as well as drill an extra hole (the bottom goes in Opol). To drill such steel with a simple drill is quite problematic. Vladimir has come out of the situation using the winner.
And finally, the teeth. In order to cut them smoothly and consistently, it was necessary to make a special clip fixing the canvas.

It consists of a pair of halves, between which it is clamped.

On the retainer with the help of a ruler, there are future teeth (with an equal step)

The triangular file is sequentially cutting them to the woods (thus adjusts the height of the teeth).
Another quality indicator was - one of the faces of the file during work was significantly out of the way.

Dissolve the teeth with a cheap lamellar layout did not come out - they were harder, I had to order a good one. In the meantime she walked ...

The next step is the manufacture of the handle. First, the billet of three layers with inserts from the moraine oak veneer is shouted - for beauty. Outdoor layers - oak, inner - beech. They glued together by a simple "moment of the joiner".

After drying the glue, we remove the clamps. The handleform was chosen anatomical. Print it on the printer and stick to the workpiece. Rounding chosen forstner drill
Next in contours cut out the jigsaw

The inner circuit shows the rounding of the handle. Knife and rashpil cut the angle, brewing edges.
I bring files
Pulling vertically, we do it in the center for mounting the canvas.

In the form of the handle, cut the canvas (I have already mentioned this earlier)

Drills mounting holes (in handles and in the canvas). In the handle screws and nuts (by the way, brass), weaken.
Grind the handle with an eye with an abrasive and coating with oil.

We collect everything in a bunch.

Even without sharpening the saw perfectly cuts, more accurately tears, wood. And if it is sharpened,
yes, and breed a teeth ...

As a result, a wonderful hacksaw came. You take in your hands and immediately want to cut something.

Vladimir removed her for a car zip. And we can admire the beautiful functional instrument, and if a desire appears, to make something similar.