Circular slide machine. Overview of models and modifications of round sloping machines. Types of round-slopheal machines

The circular flux machines are used for the outer treatment of cylindrical and conical parts from black and non-ferrous metal by the method of longitudinal, mortise and deep grinding in conditions of single, serial and mass production in the field of metallurgy, mechanical engineering at production sites in the shops of enterprises. Also, the mentioned equipment can often be found in laboratories and research units of factories and factories.

Compact circular chlorinated machines are actively used in repair shops, at vehicle service stations, in garages. In addition, the aggregates are used in workshops of vocational training institutions that are preparing machine trading specialists.

Features of circular sloping machines

The design of the equipment includes the following items:

• stanina;
• upper and lower tables;
• device for internal grinding;
• pinol;
• mounting for grinding circles;
• front grandmother;
• electrical cabin;
• the mechanism of editing abrasive circle;
• remote Control.

We offer to buy a circular grinding machine that makes it possible with high accuracy to process any metal surfaces. It is noteworthy that the working tables of these aggregates can be equipped with additional ribbed ribs to increase the strength and obtaining the possibility of working with large-sized parts showing a significant mass. Hydraulic billers supply systems provide cyclic processing of parts with minimal time costs.

In the catalog of our company, you can buy a circular slide machine with sliding guides, which are closed with special covers to prevent contamination. According to them, tables referred to in motion by manual mechanism or hydraulic system. The presence of a hinged indicator device on the front of the high-strength bed allows to control the movement of the table with high accuracy. Segment self-aligning bearings on which the spindle of grinding grandmother is mounted, provides support stiffness and increased rotation accuracy.

The company "Standard", which supplies the customers from Russia and the near abroad, equipment for processing metal parts, gives customers the opportunity to buy a circular grinding machine with an electroblock of the engine of grinding grandmother protecting equipment from overloads. It is noteworthy that the inclined working surface of the unit helps to move the back and front grandmother without loss of alignment. Grinding wheels of different graininess and hardness are used as a tool for abrasive processing of parts. For their edits, special devices with carbide discs are used.

The advantages of round sloping machines

• security in use when complying with all rules for working with equipment;
• automatic system for lubricating spindle grandmothers, reduced wear and increasing the life of spindles;
• system, which gives the ability to adjust the speed of the longitudinal transmission without jerks;
• accelerated lining and dismissal of grinding circle to save time and increase productivity;
• high reliability in the application due to the perfect quality of components, of which round sloping industrial machines are collected;
• the presence of an effective cooling system that allows to reduce the temperature of the grinding circle during rotation and extending its use;
• hydraulic or manual (mechanical) high-precision movement of desktops and spindle grandmothers;
• stability of the form of the working area with load fluctuations;
• fixtures that provide quick removal flanges and if necessary to replace them;
• the presence of splash protection plates that protect the injection of the operator with polluted metal particles into the operator's clothing;
• the ability to install magnetic separators or paper filters for the cooling grinding circle of the system;
• reliable and durable electric motors, moderately consuming electricity;
• stable processing quality;
• maintainability and ability to replace nodes.

Pros of order in the company "Standard"

Customers turn to us to buy the machine round slide or other equipment for processing made of metal parts, because we have created favorable conditions for them. In addition, the company supports high standards for servicing both permanent and new customers and strictly complies with all the obligations provided for by the Treaty.

The following benefits of cooperation with our company can be distinguished:

• professional assistance in the selection of equipment for mechanical engineering enterprises based on the requirements and financial capabilities of buyers;
• provision of installation services, start-up and adjustment of round-sloping universal machines;
• convenient payment methods, equipment for leasing, favorable calculation schemes;
• delivery to all regions of the Russian Federation and CIS countries on customer enterprises;
• provision of services for service machines;
• a large selection of machinery for machine-building factories, repair organizations using machinery equipment;
• system of discounts and installments;
• models from leading manufacturers.

Cost and Terms of Delivery

Round-slip manual control machines Widespread due to their functionality and relatively small cost. Typically, round-fluffing machines are used to treat exterior conical and cylindrical surfaces, and they are also used to process the ends of round blanks.

This type of machine tools provides for the installation of the processed workpiece in the centers or in the cartridge - it is driven into a rotational movement, the direction of which is opposite to rotating the abrasive circle. The billet installed in the centers on the table makes a reciprocating movement, which takes uniform processing of the entire cylindrical surface. To ensure the grinding depth, additionally, the tool or desktop can move vertically.

CNC circular slide machines are used for grinding cylindrical and cone-shaped parts and blanks. Modern circular chlorinated CNC machines are able to process almost any materials, which makes them indispensable in production and in industry.

At the same time, numerical management allows you to optimize the operation of the machine, reduce the timing of the processing of one part, minimize the negative consequences of the human factor.

Our catalog presents high-precision circular slide machines with numeric software control from KNUTH. Our indisputable advantages are the prices of the manufacturer and the annual factory guarantee.

For grinding of the inner and external surfaces of products and billets, caliper grinding devices are often used. The grinding device itself is attached using a special fastening bolt. This equipment has been widely widespread, it is efficiently used in a wide variety of industrial areas.

We are ready to offer our customers high-quality caliper grinding devices "KNUTH". This equipment, distinguished by the highest reliability and accuracy, has proven itself from the best side. At the same time, we provide our customers with the annual factory guarantee. Prices of direct manufacturer.

CNC metal circular stained machines from the Swiss Studer company at Galika AG warehouse in Moscow - in stock and under the order. Studer is a hardware and software, system integration and service of higher Swiss quality. The company has 100 years of experience in the development and production of grinding equipment.

Studer S20 and Studer S30 machine tools are designed for grinding parts in single and small-scale production. They are suitable for use in any industry, in which accurate small details are manufactured. Management is very simple, and the caller is possible for a short time.

Universal round-winged machines

Universal CNC circular grinding machines are designed for grinding details of small, medium, large size in flat and serial production.

Production circular fluffs

The Studer S11 model is designed for those customers who are aimed at serial release of small shafts and sleeves, outdoor treatment with high speed and high accuracy.
Studer S22 is a production platform. Its main purpose is the mass production of the details of the medium-sized customer. The combined processing Studer S242 perfectly combines the technology of round grinding and sharpening.

Circular slide machines Schaudt

Schaudt is a German manufacturer of high-class grinding machines. The company establishes global standards in technology, accuracy and quality center grinding round and non-circular details. The Schaudt FlexGrind M model is designed for grinding long and heavy parts.

Often, after finishing the part on a metal-cutting machine (for example on a lathe), the quality of the surface obtained does not meet the requirements for it to be submitted. In order to achieve the necessary surface roughness indicators, this type of metal processing with the removal of the material layer is used as grinding. For the grinding of parts made in the form of rotation bodies, circular flux machines are used.

Circular slide machines are divided into four groups:

• Simple
• Universal
• Currency
• Special

Universal machines have a design that includes a turntable, in the other execution, in addition, have a rotary front and rotary grinding grandmother.

Cirl sloping machines of simple type all listed nodes have a non-refreshrating design.

Machines intended for mortise grinding have no longitudinal billet supply. The grinding circle is quite wide to overlap the surface being processed, along with the rotational motion there is a continuous transverse feed to the workpiece and due to which it produces grinding along its entire length.

Special round-fluffing machines are technological equipment of a specific profile intended, for example, for grinding surfaces of turbine blades, profiles of teeth, cam shafts, etc.

The machine has the following main nodes: a bed, a turning table, a grinding grandmother, anterior grandmother. Inside the bed is placed hydraulic drive of the turntable; In the anterior grandma there is an electric spindle that transmitting the rotational movement to the workpiece, and inside the grinding grandmother - the drive of the grinding circle.

The main controls of the machine are the following: Table movement speed control handle, handwheel handwheel, handmade handmade grinding grandmother, pinley removal handle, table reverse handle, automatic stamp stroke handle, stops, grinding headlock control knobs, grinding handle and removal of grinding grandmother and push-button station.

To improve the quality of processing and simplifying work on the machine, the circular slide machines are equipped with digital display devices.

The complete range of grinding machines is located in the appropriate section

To produce from metal products of different sizes, Metallurgy masters carry out different technological processes carried out using hand tools, industrial equipment. There is a circular fluffy machine among the masters. It is used to remove the metal layer.

Comb sliding machine

Understand the principle of work is easier when key machine key nodes are known. These include:

1. Stanna. The base that keeps the remaining elements of the equipment. Sustainable legs are installed on it. Compact models can be equipped with wheels to move through the workshop.
2. Grandma, on which a spindle with a grinding circle is fixed.
3. Calipers, knives.
4. Gearbox.
5. Device for changing the position of the snap.
6. Visits to hold the workpiece.
7. Control Panel.
8. Guides for which the table moves.
9. Working surface for placement of parts.

Modern equipment is equipped with numerical control. It allows you to more accurately carry out the technological process. Abrasive material with a uniform layer removes the material from the workpiece, without leaving the recesses, bugrov. It is important to correctly configure the program to get the best result.

Characteristics

You can estimate the capabilities of the machine on the stated characteristics from the manufacturer. It is necessary to deal with the main parameters that are marked in a technical passport:

1. The power of the metal machine is indicated in kW. The performance of the machine depends on this indicator.
2. From the size of the equipment, the number of operating spindles, the power of the engine depends on the power supply of the device. It can feed from a total network of 220 volts (models for workshops) or from 380 volts (industrial models).
3. Desktop dimensions. The permissible size of the processed billets depends on them.
4. Diameter of equipment (grinding circle). Its dimensions are indicated by GOST.
5. The number of spindle revolutions per minute.

In addition to the main characteristics, the dimensions of the machine itself can be attributed.

Classification

Depending on the dimensions, performance, type of installation, two groups of CNC circular slide machines are distinguished:

1. Desktop models. Compact equipment that is used in private workshops. They are distinguished by low performance, small dimensions, a small number of additional features. Food from the network 220 volts. Most desktop apparatuses are held with manual CNC control.
2. Industrial models. Large machines that are equipped with a powerful engine, a large work desk, guide, stepper motors. There are machines with two and more working parts. Industrial equipment has a high performance indicator and therefore suitable for mass production. Most models feed on 380 volts.

Depending on the functionality, two groups of round sloping machines are distinguished:

1. Simple cars. Designed to carry out one technological process. Such devices can be collected with their own hands, looking at the finished drawings, prepare consumables, tools.
2. Universal models. Multifunctional machines with different settings. Due to this, it is possible to process the blanks of a complex shape, of different sizes.

CNC circular chlorinated machine

Purpose of machine tools

With the help of a grinding machine, you can handle wood, stone, plastic, metal. It is intended to perform various technological operations:

1. Processing cylindrical, rectangular, triangular, square blanks. Removing a different layer of metal.
2. Creating a rough surface. For this, the special type of abrasive is selected.
3. Sharpening cutting tools, snap. In order not to spoil the cutting edge, water cooling is used.

To process cylindrical parts you need to select the graininess of the abrasive material. From this depends on the layer of removable metal, wood, plastic, stone. The smaller the particle, the more accurate grinding occurs.

Principles of choice

To choose a reliable machine, you need to consider a number of features:

1. The speed of movement of the desktop on the guides. Depends on the power of stepper motors, which are installed with CNC systems.
2. The speed of rotation of the grinding circle.
3. Engine power. The performance of the equipment depends on this, the possibility of working for a long time on it without a break.
4. Design dimensions. Selected depending on the presence of a free space indoor.
5. Desktop dimensions.
6. Processing accuracy. Depends on the size of abrasive grains.
7. Management type. If the machine is rarely used, it is not necessary to buy expensive equipment with computer control.

Different models of circular chlorinated machines are equipped with various additional features. The cost depends on their quantity.

Making a machine with your own hands

To sharpen tools, handle small billets, you can make the machine with your own hands. To do this, prepare consumables, tools:

1. Metal corners to create a base.
2. Engine from washing machine.
3. Grinding wheel.
4. Wires, Switches, buttons for the manufacture of the control panel.
5. Welding machine, drill with metal drills, Bulgarian.

The process of creating a self-made apparatus:

1. Initially, you need to explore the finished circuits of the circular sloping machine.
2. Collect the base with the desktop, drive, grandmother under the desktop. It is made of metal corners. Separate parts are connected by the welding machine. Seams need to be cleaned, covered with anti-corrosion.
3. Secure the engine on the bed. On it to install a grinding wheel.
4. Conduct wires, make the control panel. It is advisable to use the engine with the ability to change the spindle speed. Due to this, a separate regulator will appear.

Grinding wheel is installed vertically. Its lower it is desirable to make it so that it is one part in water tanks. Additionally, you can make a massive desktop on which you will be installed for the clamp of parts.

Making your own hands

Operation of equipment

Circular sloping machines for metal must be able to exploit to achieve maximum effect from their work, not injury themselves. Rules:

1. Before starting work, check the reliability of the grinding circle fastening, estimate its condition. It is impossible to use abrasive with cracks, chips, irregularities.
2. Check connection to the network. Set the settings of the machine in advance.
3. Put the protective glasses so that the chips do not get into the eyes.
4. Give the blanks to cool if the equipment does not have water cooling.
5. Change abrasive depending on the required quality processing.
6. Lubricate motor oil moving elements equipment to serve longer.
7. Clean the working surfaces from accumulating waste after processing.
8. Reliably fix the details of the clamps so that they do not shift during operation.

Do not try to grind solid surfaces with small abrasive at low power.

Round-slip machines are used in various enterprises. They are treated with wood, plastic, stone metal. Depending on the selected type of abrasive material, various types of grinding (coarse, finishing) are carried out. You can make the device yourself. It is suitable for grinding small details, sharpening tools.