How to make a miniature fountain. Decorative fountain in the country of hand. There are fountains without pump
For any owner, the appearance of the country area or the courtyard is of great importance. Specialists can engage in his design, but, if desired, this can be done by it. A good decoration of the yard or the plot will be the fountain. It can also be built on its own project.
Types of fountains
Fountains for giving are different types. They are divided into types: on the device, in appearance, according to the peculiarities of work, etc. By the method of the device, the country fountains are circulating and flowingThey are also called "Roman".
Did you know? The first fountains appeared in ancient Greece and in ancient Rome.
Circulating Expand the water cycle. Water fills a specific reservoir (bowl, vase, water boss) and with the help of a pump is supplied to the device from which the water jet directly beats.
Everything is arranged in such a way that the outgoing water falls into the tank and again swings up. Thus, the device does not imply the flow of water from the water supply or well. The only thing you need is to top up the water to a certain mark, since it has a property to evaporate or spray.
Flowing fountains It is arranged with the use of water supply (well) and sewage. Water is supplied to the top, drops down and goes into the sewer. The method of course is irregular, but such fountains have a number of advantages:
- aesthetic appearance;
- drinking water;
- the possibility of using water for watering lawns, flowerry, shrubs and trees.
Did you know? The highest fountain in the world- 312 m. It is called fountain« Fahda» Located in Saudi Arabia.
Choosing a suitable place
If you decide to build a fountain on the site with your own hands, then, first of all, select the appropriate place for this. In the case of the presence in the country or a pond, the choice of space is obvious. Where the pond is located - there will be a fountain. The device of the pond, of course, will have to be modified, correcting, but the foundation will remain.
If you start "from scratch", then the place must be chosen, carefully weighing everything "for" and "against". Garden fountains made by their own hands perform different functions: the garden moisturizes the air, which is useful for trees, create cool conditions, can be used for irrigation, etc.
For this reason, it is necessary to choose a place so that the fountain not only brings an aesthetic pleasure, but also was useful. A suitable place for arrangement will be an outdoor area between trees, shrubs or a lively hedge.
Trees and bushes should not hang over a reservoir or reservoir, so that garbage does not fall into the water and fall out the leaves. It is harmful to water filters. Even because of the proximity of the trees, and therefore their root system, it is possible to violate or even the destruction of the underground part of the fountain. If there are plants that do not carry overlapping plants grow, exercise the fountain away from them.
Important! Do not place the fountain near the buildings.
It is not necessary to equip the construction in the open sun, since it is fraught with water flowering. There is one more condition: a fountain in the country, made by her own hands, must be harmonized with a common design. Everything must be performed in one style. It should be a platform that is well visible from the windows of the house and from any part of the yard, because you build a fountain, first of all, for aesthetic pleasure.
Preparation of materials for construction
When the place is selected for the fountain and its type, the project has been developed, it is necessary to determine which materials for construction will be needed. Suppose the project is designed for a circulating inkjet static fountain with single water emissions, i.e. type "Geyser".
At home to improve the fountain, you will need cement, sand, crushed stone, durable polyethylene film and a construction facade mesh with a diameter of the structure (and film, and the grid must be of the same size). In addition, we need a plastic capacity of about 50-70 liters, depending on the size of the structure.
If you plan to make all the stones, then harde them immediately. It can be a wild stone of the desired size, cobblestone, granite, large pebbles, etc. To ensure due work, a fountain pump will be needed.
Pump selection criteria
Depending on the type of fountain, select the pump. For the "waterfall" we would choose the surface pump, and since we have a traditional fountain - choose submersible.
As a rule, submersible pumps perfectly perform their function. They are compact, they work quietly, they simply install them and, that is also important, acceptable at the price. Submersible pumps are different power. It is calculated in the amount of water pumped in 1 hour (l / h). 
The height of the jet just will depend on the power of the pump. The maximum height is calculated on the diameter of the "foot" made by you. The pump in this case does not need to choose according to the principle "the more powerful, the better." We need such a jet for arrangement so that the jet is high enough, and that the splashes do not fly beyond the "foot". For the cottage, the height of the jet will suit from 80 cm to 1 m.
Important! It is necessary to ensure that the water does not sprinkle outside the fountain. Excessive humidity can lead to the death of plants and damage to things.
Manufacturers, as a rule, in the instructions are given a table of power ratio and height of the jet. Since we are equipping the "Geyser", then for such a device, you will need a pump with a capacity of about 7000 l / h.
Pump system installation principle
The pumping system is installed by 10 cm above the bottom on the stand (laid out brick or mounting tube). It is supplied to the hose or pipe with water supply. Usually the sprinkler comes complete with the pump, but if it is not, then you can make it yourself.
To do this, you can take a conventional pipe from stainless metal. The diameter will depend on the height of the jet and the diameter of the water spraying. For a small fountain of 0.8-1.0 m, a diameter of 2-2.5 inches will suffice. Length will depend on how deeply the pump is immersed. Above water is enough to leave 10-15 cm. 
To give a jet of the form, it is possible to chop the pipe, sprinkle it, leaving the hole, drill a few holes or cut into the thread and fasten the desired nozzle. Connect to the pump directly or through an adapter (if necessary).
Installing fountain. Step-by-step instruction
Master class of fountain installation at the cottage with his own hands with a step-by-step photo Find on the Internet simply. Typically, the installation takes place in several stages.
Even the smallest reservoir is able to decorate his own country area and give him a highlight. And the fountain made by his own hands will not only become a beloved place to relax and will deliver aesthetic pleasure, but also will be a reason for compliments from invited guests.
But not everyone is solved on the personnel structure of this mysterious hydraulic device. Some daches mistakenly believe that the construction of the fountain is the process of time consuming and expensive and without the help of specialists in this matter is not to do. But such a pleasure to deliver herself every amateur to spend time in nature, the main thing is to know all the nuances of the construction of the fountain personally.
Choosing a fountain type
You can select two types of fountains by type of construction.
- The open option involves the flow of water to the nozzle. The formation of a jet in such an embodiment of the device is due to the drops of water levels. The water pressure in this case is weak, so it is necessary to constantly monitor the water level. In addition, water in such a fountain is quickly contaminated. To create it, you must install a small tank at an altitude of about one meter above the nozzle.
- Fountain with pump mounting is the most practical and spectacular option. Thanks to the room at the bottom of the pump, continuous water circulation is ensured. Here and the pressure is stronger and the visual effect is more beautiful.
By design, pumps that perform the roles of fountains are divided into submersible and surface (stationary).
Optimal place to place the fountain
Selecting a comfortable place to build a fountain, it is recommended to take into account the degree of slope of the Earth. If the area is uneven, it is better to place a similar scenery in the lowland. This variant of the location of the reservoir will allow not only to adjust the volume of groundwater, but will increase the saturation of air oxygen.
- too close to the house so that moisture in windy weather does not fall on the walls;
- in open areas, in order to prevent water flowering due to sunlight on the reservoir;
- next to the trees, to leave the leaves, seeds, the down, falling with them did not climb it, and the roots did not damage the waterproofing.
It is necessary to have a fountain in such a way that it is not an obstacle to other buildings and viewed from all points. It is recommended to place the design near the place of rest.
The minimum distance that should be sustained between the fountain and plants, buildings, furniture - 50 cm. So plants will not die from excessive moisture, and the furniture will not come into disrepair. The ideal option for the location of the fountain is a half-end and a place protected from the wind, in proximity to the water source and electricity. Such a location will save you from extra wires and additional work on their isolation.
Deciding with the place, it's time to think about the form and depth of the future fountain.
Preparation of materials for construction
For the construction of a fountain in order to save financial and strength, you can take advantage of the construction of a decorative pond with the equipment of its pump.
Materials required for the construction of the fountain:
- capacity for the fountain;
- pumping station;
- durable film;
- bayonet shovel;
- natural stones of various sizes;
- sand, gravel;
- decorative elements.
Selection and installation of capacity
If a miniature fountain is planned to be constructed, it is possible to use an ordinary plastic pelvis as a tank or any other low-size container.
For large water bodies, old baths are suitable or dug on their own. If a bath is used, you need to dug a hole of this size so that it is not above the surface of the earth. All holes are reliably close in the bath, after which it falls into the pit and strengthened the earth, stones and sand.
For a homemade tank, a pit of the necessary depth is made and covered with a dense, high-quality film, which is fixed along the edges on the surface of the stones. Stones of various shapes and sizes are also added to the bottom. It is important that the stones do not have sharp edges and could not cut the film. Stones are evenly distributed throughout the bottom of the future fountain.
Choosing a pump for the construction of a fountain
In order to construct a fountain on the site yourself, it is not necessary to acquire expensive materials, you can adapt any old elements. However, it is not necessary to regret money - the pump, the better it will be, the more beautiful it will be a fountain and will decorate the site longer, without delivering problems.
Submersible pump - the optimal option for the construction of the fountain in the country area. Works on the principle of centrifuge. You can also install the surface pump, it is mounted on the edge of the water branch, but most often used on large fountains and cascading reservoirs.
When choosing a pump, it is worth repelled from the pressure, which is constantly present in the pipe and drops of this pressure. Therefore, the purchase of the most powerful pump can be unnecessary, since it is not in all cases he will be able to work out its complete power.
Regardless of which type of pump will be selected, it is important to remember that the power should be correlated with the pipe diameter. The fountain jet should go under powerful pressure, and not slowly flow from the pipe, since there will be no effect on such a design.
How to make a fountain with your own hands: Step-by-step instructions
The construction of the fountain includes several main steps:
- pit preparation;
- fixing the trench;
- installation of tank or flooring and edges film;
- installation of pumping equipment;
- decorating fountain.
For the construction of such a fountain, you will need:
- old tire from a truck or tractor;
- cement mixture, water, crushed stone and sand;
- capacity for mixing cement and shovel;
- sealant;
- building level;
- mastic;
- stones;
- pump.
Stages of work:
Video - Tire fountain with their own hands
For such a fountain it will be necessary to prepare:
- dense film;
- shovel;
- sand;
- pump;
- stones of different sizes without sharp corners.
Stages of work:
- dig a hole, we clean it from stones and tamper the bottom;
New life of an old bath
For such a variant of the country fountain, it is necessary to cook:
- shovel;
- pebbles;
- pump equipment;
- bath;
- insulating tape;
- scissors for metal;
- sheet of colored iron;
- drill.
Stages of the Fountain facilities:
- digging the kittleties corresponding to the size of the existing container;
- we put the bath inside and plug all holes;
- i cut out wide strips from iron and put them around the bath, we close with stones;
For such a sprinkler, you will need:
- plastic bottle;
- metal, durable wire or nail;
- insulating tape;
- garden hose.
Stages of building a fountain:
- we place the mini fountain in the desired place and turn on the water.
This option is perfect for watering the garden and garden.
Decorative House Fountain
For the construction of such a fountain it will be necessary:
- large flower pot with pallet;
- paints on glass and ceramics;
- small water pump;
- contours;
- decorative balls, decorations for aquarium.
Stages of construction:
- decorate the pot with the help of paints;
- we do a little hole in the bottom;
- we install under the pallet of the pump;
- pump tube drag through a hole done in a pot;
- i fall asleep the bottom of the pebbles;
- decorate artificial plants and figures;
- fill the pot pot.
Video - a decorative fountain with their own hands
Decorating fountain
To emphasize the uniqueness of the fountain made by their own hands, you can decolate it. It is recommended to lay out beautiful, multicolored stones of different sizes around the reservoir, put flowers in pots, place cute animal figures, birds and so on.
In order for the fountain to hit with its beauty and unusual at night, you can backlit using special equipment. The lamps installed around the perimeter of the fountain and the backlight at its bottom will create a fabulous, magical atmosphere.
The bottom of the reservoir can be labeled with special plants, plant bushes around the fountain.
Any countrywater and fountain, including need careful care. To maintain the order and transparency of water, a pleasant sighteave type of design must be regularly cleaning the tank. With the help of special devices from the water surface, it is required to remove leaves, seeds, fluff and other items that can not only spoil the appearance of the water branch, but also lead to a fountain malfunction.
At the end of the summer season, it is necessary to drain all the water, move the removable parts of the structure into a closed room, and the remaining parts and the cup to cover the film so that the dirt does not get into them.
To build a fountain with your own hands at the cottage or even in the apartment will not be difficult and will not require large financial resources. Before building a decorative fountain, it is necessary to decide on the shape, size and installation site. The options for the location of such designs are many - in the arbor, on the lawn, in the garden. After the construction of the fountain, it is necessary to carefully monitor the purity of water, regularly remove the garbage and pour water because it will evaporate.
Such designs are widely used in the design of country sections. Fountains can decorate any inclusive zone or become a highlight of the country area. And by connecting fantasy and decorative elements, you can make it even more beautiful and unusual.
Even the smallest fountain is capable of transforming a landscape of cottages or a private house. The decorative structure will definitely become a beloved area of \u200b\u200brelaxation on your site, because it will give the possibility of unity with nature at any moment. Would you like faster to become a reality? There is nothing superpower here - make a fountain with your own hands for everyone. Do not believe? Then to your attention a step-by-step instruction with a photo, following which you can quickly and without attracting professionals to get a spectacular and functional fountain.
Choose a fountain
First of all, you need to choose the appropriate version of the fountain for your site. We are talking about its dimensions, shape and materials. When solving this issue, focus on the area and stylist of the yard of your cottage or private house.
So, for a large plot, it is better to choose a classic sculptural model that will become the center of the landscape composition. And for a modest courtyard, fountains are suitable in the form of small architectural forms: marine shells, fabulous heroes, houses, pots and other similar figures.
But it is not necessary to buy a ready-made sculpture, because you can also build a fountain with your own hands. The easiest option is the design of stones. To make it easily, put the large flat stones on top of each other, make the openings in each of them and drive all the products on the copper pipe - it is through it that the water will flow to the top of the design. Then close the gaps with small pebbles and treat the slit silicone sealant.
Choose location
The next step - you need to decide exactly where the fountain will be located on the site. In order for the construction fully fully fulfilled its aesthetic function, it cannot be installed "anywhere" - it is important to select the best location. And for this you need to consider several nuances.
- First, the fountain is not a place on a too open area, since under the influence of active sunny rays the water can start "blooming".
- Secondly, the fountain cannot be placed among powerful trees - their roots can provoke the deformation of the reservoir and waterproofing. In addition, leaves, fluff, fruits and seeds of trees will constantly pollute the fountain.
- Thirdly, the construction should not be too close to the house, otherwise the moisture with the stream of the wind will fall on its walls.
- Fourth, it is undesirable to stir the fountain on the open wind so that his impulses do not "disappeared" the jet.
Thus, the perfect location for the decorative fountain is an easy semide surrounded by colors and low bushes.
When you choose a place, proceed directly to the arrangement of the fountain. It involves the phased implementation of the three main groups of work:
- preparation of the reservoir;
- montage of the pump;
- installation and decoration of the fountain.
Prepare the tank
In order for the fountain to be durable and solid, it is necessary to equip a special reservoir for hydraulic equipment and water. This is done as follows:
- Drop the recovery of the pre-calculated depth and diameter you need.
Important! The level of the reservoir depth should be lower than the level of the soil so that the soil around the fountain bowl is not flushed and the base is not deformed.
- Put the thin layer of sand on the bottom of the resulting pit and thoroughly strengthen her side walls with bricks.
- Ship the inner surface of a dense polyethylene film - it will prevent the passage of water.
- Fix the film on the upper edge of the tank and process the seams by frost-resistant silicone sealant. Pour the bottoms on the bottom of the stones, distributing them on the surface of the film. Stones should not be sharp not to deform the film.
- Arrange near the pit, a small emergency draining, in order to prevent the increase in the water level in the tank.
Install the pump
The fountain will not be able to work without the most important mechanism - the pump. It is he who is responsible for the continuous movement of the water flow. The general principle of the pump operation is simple: water is thrown through the nozzle into the tank, then it falls into the pipeline where the coarse and thin cleaning passes, and then the already purified is sent back to the nozzle.
The functioning of the fountain directly depends on the type of pump:
- Submersible - works on the principle of centrifuge and is located in the center of the fountain reservoir under water. This is a cheap, but reliable device, for mounting which you do not need any fasteners - the submerged pump is quite heavy, therefore it does not shift from the place. It is suitable for small weak fountains.
- Surface - a more serious type of pump, which is installed not inside the tank, and on its edge on the surface of the Earth. Such a device is designed for large fountains with a complex design.
The pipeline for the pump system can be constructed from plastic pipes. Their optimal diameter is 16 mm.
Council. In order to strengthen the pump operation, additionally install the pressure reservoir - it will guarantee the constant pressure of the aqueous stream.
Decorating fountain
After the main functional elements are installed, you need to take care of the installation of the fountain itself, or rather its top. If you are using ready-made sculptures, you must have special mounts for installation. But the homemade stone fountain is best installed on metal rails, pre-laid on top of the tank.
Then proceed to decorating the design. Fountain can be decorated with plants, multi-format stones, clay figures, microsculs and any other details that seem relevant to you on your site.
Do not forget about such a spectacular decor tool as the backlight. It can be underwater lamps, light ribbons, floating lights, ground lamps - here you are also unlimited. But remember that lighting structures should be completely sealed, and all their contacts are most securely protected from water, otherwise it will be used unsafe.
When all the work is completed, fill the tank with water and start the fountain.
As you can see to make a beautiful fountain with your own hands, you do not need to work hard and spend big money. Do not deviate from the instructions, use high-quality materials and do not be afraid to experiment with the decor - observing these three simple rules, you will definitely get a functional fountain, which will be more than one year to please your eyes and configure a positive way.
Which fountain to choose for the cottage: video
Fountain at the cottage: photo
To all those who live on the country area, and want to somehow diversify and embellish their landscape, making it more memorable, unique and beautiful, we offer to place a small fountain, especially since you can spend your own work! In general, the step-by-step instructions for creating a country fountain can not be called very difficult if you have a set of desired building materials and tools. Having everything at hand, you will easily transform the countryside landscape beyond recognition.
Placing a fountain on the site
First of all, it is necessary, of course, plan the placement of the future fountain, its appearance and dimensions. Taking into account the sizes of the courtyard, do not make the design of the too small or, on the contrary, is large! Otherwise, you will not be able to achieve the maximum visual effect from the presence of a new building, which is possible. And do not forget that the power of pumping installations should be selected directly proportional to the dimensions of the construction built in the country.
Deciding with the view, it is worth starting to look for the right place to install. First of all, the fountain should be placed where it will be well visible. At the same time, the design should not be far from the resting place. Remember that the sound of water together with cool freshness in hot weather acting precisely that it is necessary for a peaceful and pleasant pastime on the street.
It is not recommended to place the design in place where the sun is constantly shining. Otherwise, you will have to completely drain the water and pour a new one to avoid her flowering. Not far from the trees, the fountain is also not a place, since the roots of the plant can break the bowl, as a result of which they will have to fully disassemble the entire design.
If you are planning to spend your hands, then you should not have a fountain near the walls of the house. Otherwise the structure does not avoid a meeting with With which it will not be just then will cope. In addition, the presence of the above pests will reopulate not only the appearance of the structure, but at the same time will cause not the most pleasant smells.
Planning build buildings in a timely manner! No need to place a future fountain at the location of the tracks to other facilities.
Instructions for performing work with your own hands
Specifically, how to build a fountain in the country, we will talk on a simpler example, namely the Spring Fountain. This structure is characterized by some advantages, including:
- The ability to make dismantling work before the winter onset;
- Spectacular appearance design;
- Quick access to all the desired details in the event of a breakdown;
- Uncomplicated care.
Deciding finally with the place to place the design, we start digging the pitual, which will be slightly more than a piece for the fountain. At the same time around the pit, it is necessary to further break through a small 10-centimeter chute.
At the bottom of the pit should be poured with a sand pillow with a layer of 15 centimeters. This will reduce the underground area of \u200b\u200bthe element from the effects of roots from the bottom.
Next, the surface is flushing, after which there is a bowl of plastic. The next step in the level is the font, after which the sand is falling and tamped. At the same time, the placement of the capacity should be carried out in such a way that the edges are made over the ground for approximately 5-8 centimeters.
The next step, plastic container is filled with water. Moreover, it is not necessary to fill up to the edges - leave approximately 4-6 centimeters to the edges of the design.
After that, it is possible to mount the fountain, as well as check how the pump works. If the pump is configured, that it is necessary to adjust it so that the water is pouring back. You need to choose and buy the necessary equipment carefully. And it is better, if in the store you exactly explain to the seller, what volume and dimensions you have on the site of the bowl. Only after that, he will be able to tell you what kind of equipment should be bought.
At the end of the installation work with pumping equipment and bowls, you should move to the installation waterproofing fabric. To do this, cut the material so that the diameter coincides with the size of the pit under the fountain. Next, from the central part, we begin to cut the strips so that the diameter of the internal circle coincides with the diameter of the existing bowl. The finished bands are bend and placed inside the container. Fixation takes place sealant. Remember that a lot of time and effort will be required to fulfill all the work, especially in the initial stages!
So that in the future the design does not change its form and has sufficient stability, several reinforcement rods are placed on top of hermetic material. They already laid a finely galvanized grid. Moreover, the dimensions of the cells will have a direct impact on the size of the rubble or stones, which will continue to be applied to decorate the fountain.
The final stage of construction work is the decoration of the resulting element of the landscape. The outskirts of the fountain should be embedded with more cobblestones, but it is not necessary to perform the border too clear. The grid is folded with small pebbles, for example, rubbed or pebbles. If you need to install additional lighting near the design, then its boundaries should not be too apparent. For this, you can place small vegetation on the sides, be it bushes or flowers.
If you consider yourself to lovers of Eastern exotic and want to place the thematic Japanese fountain on the cottage, then its design will be installed in a similar way. At the same time, step-by-step instructions for installing the Japanese fountain will consist of the same works.
Waterfall in the country
Of course, in the conditions of a country house, you will not build some grand elements, but it is still possible to implement a small meter waterfall. Above, we have already told how it is manufactured by a pit for a bowl of the fountain, so it will not be re-stopped.
In our case, the waterfall is constructed, and therefore if your landscape does not provide for any hill, it will need to do it with your own hands!
Moreover, create a mound on the site is quite convenient during the padding of the pit. To do this, it will be necessary to simply drop out of the ground in place, where you are going to place the future slide with the subsequent rambling. At the same time, do not forget to perform a small groove in the mound and the wall of the pit, where the hose will be placed in the future.
As soon as the mound with the pit will be fully prepared, we turn to the installation of waterproofing material on the walls and the bottom of the future reservoir. For this, the PVC film is perfectly suitable, you can use another material. It is necessary to place the canvas so that the material besides the complete walls and the bottom of the walls in addition to the full of the walls, the additives were also treated approximately 50 centimeters around.
In mandatory place, place the water pumping tube into the upper area in advance, after which it is lowered one side by 30-40 centimeters up.
Since the fountain waterfall is considered a constant design on the plot, it will correctly be concreted by the created thicket. To do this, carefully expand the metal mesh on the bottom of the hole. In this case, it is impossible that the waterproofing material in the process of work accidentally damaged. After that, the concrete mixture is poured to get a 12-15-centimeter layer.
The next step is harvested by the walls of the reservoir. A grid is placed, which is after fixed in the still with liquid concrete. After that walls are flooded with concrete solution and this is the most complex construction process will be completed. You can return to the creation of a fountain-waterfall in a day when concrete will freeze.
After a day, you can move to the decoration of the artificial reservoir. Immediately on the rammed elevation, steps are created. 3 will be quite enough, while the width of each should be at least 25-30 centimeters!
On ready-made smooth surfaces is a pebbles, sandstone or some other material you like more. The remaining components of the fountain-waterfall are decorated with marble, rubble, cobblestone or just a stone. The same applies to the film, which remained around the perimeter of the reservoir.
At the end, you will just run the pump and wait until the capacity will not be filled with water. Thus, you will create a beautiful composition in the country, where the flow of water will be measured to fall on the stoves of the structure, endowing the site with a pleasant murmion.
Stone design
How to perform a fountain of stones with your own hands? Many owners of the country housing are asked by this issue. First of all, you should take care so that all the necessary materials, tools and tools are in your territory. Among them should be:
- Pipe made of copper with a diameter of about 15 millimeters;
- Coupling;
- Water pump, in extreme cases underwater, but no capacity is not lower than the average;
- Wooden bars;
- Capacity from plastic for constructions of the bowl;
- Water flow regulator;
- PVC or metal tube for laying an electrical cable;
- Gravel and stones of flat shape.
A hole for the bowl of the reservoir should be pulled out slightly more than the container prepared for the Fountain facilities. For greater reliability, it is necessary to float the gap between the walls of the pit and bowl. Similarly, the situation with the construction of the waterfall does not forget to do at the bottom of the pit sand pillow! From above is laid out a layer of pebbles.
The pump for pumping water should be placed in the container freely, which will make much easier in subsequent repair work in the event of a breakdown. From various debris artificial reservoir protect the most common small and fine grid. Wooden bars will be needed to give the design of a fountain of greater strength. Also for this you can use metal reinforcement.
The role of the base performs a pipe from a metal, which must be fixed with the pump in a vertical position.
Next are the work related to the preparation of flat stones. In this case, it is necessary to drill small holes in the stones, the diameter of which should be slightly more than at the metal pipe, which is the basis of the fountain design.
The next step, as in the construction of a children's pyramid, we put the stones on each other. In conclusion, you will only need to embellish the finished composition with decorative elements and run the pump. After that, simple to do with your own hands, but no less beautiful and spectacular summer fountain will be ready for further use.
Below, we suggest it seeming interesting solutions for the independent creation of a stone fountain:
Submersible fountains
If there is already an artificial reservoir at your country, and you wanted it to somehow diversify it, then the finished tank with water can also be used as the basis for creating a submersible fountain.
In this case, the design principle is quite simple - water through the pump is supplied to the tank directly from the pond. To perform work, you will need:
- Pipe to ensure the flow of water;
- Pumping installation;
- Nozzle to create a desired water jet, as well as to ensure the necessary direction.
As for the nozzles, they can be completely different. For example, the so-called nozzle-bell hides inside itself a couple of discs. Water, leaking between discs, changes the exit jet.
Another nozzle - Geyser is a narrowed construction, due to which the fountain will effectively repeat the natural phenomenon.
Submersible designs themselves are distinguished by a large set of features. For example, with the right approach, you can implement on the territory of the country house a beautiful effect of the key beating from the bottom. To achieve this, during the execution of work with your own hands, the fountain is created so that the end of the pipe is not visible due to the reservoir.
To date, there is a wide variety of nozzles, with which you can significantly increase the possibilities of decor.
Stationary installations
Stationary fountains perform a real find not only for many professional workers, but also beginners in the field of designer and landscape art. The finished elements of the site may have the form of small ancient structures or full-fledged stone fonts. Such structures are created using plastic bottles, clay pots and in general any construction and urgent material, which was lying in the house. Fountains created for Japanese gardens are very popular.
For work can be used any frost-resistant material, be it marine pebbles, artificial stone, marble, etc. For decorating finished structures, paint is often used. In this case, work can be carried out in several ways:
- Painting work on the finished figure;
- The material is painted before the construction work.
The last method is considered to be more expensive, but it is more reliable. To protect the homemade fountain from the effects of mold, fungus and moss, it is recommended to handle the surface in advance special composition.
A compact and well-kept fountain will become an excellent addition to the playground or a place of rest in the country house. With the help of our advice, each person can spend all the work with their own hands even without special skills and knowledge. Place this unique decor element in the country area, and it does not matter whether it will be a two-meter cascade waterfall or will perform as a simple geyser fountain! The most important thing is that the finished design does not stop the reasons for the owners of the house.
At the end we offer to see a small photo gallery and video for inspiration and ideas.
Cozy spitting on the outdoor terrace, inhaling the fresh aroma of the blooming garden and drinking herbal gulls with a peace, we suddenly feel that there is not enough of something in our country site ... This thought is concerned and gradually acquires the type of completed idea. And not to build a fountain in the country with your own hands? Under the whisper of the flowing water of the fountain is always nice to relax, relax and push away the urgent problems "for later." In addition, running water makes the cottage much more comfortable and brings a special color to the landscape.
To implement the idea, you can, of course, go the simplest way - to hire specialists who will do everything for you, for a certain (pretty high) amount, of course. And you can show fantasy and build a fountain on your own. Let us not "globalize" with you, building a super-duper a grand design, and we will make such a small cozy stone fountain))
Materials
For the construction of this stone fountain, we will need:- Water pump with a capacity of at least 1100 W
- A copper tube with a diameter of 1.5 cm, through the base of which water will come from the pump to the top of the fountain.
- Waterproof bowl (tank) for pump placement. The bowl must be purchased so that the water pump is immersed in it completely, and the distance from the top of the pump to the edge of the bowl was at least 15 cm.
- Plastic or metal pipe for mounting the electrocable from the pump.
- The coupling that connects the copper tube with the pump.
- Float regulator of water supply.
- Metal grid for a bowl that will protect it from garbage.
- Gravel for drainage, which you get into the waterproof bowl.
- Polystyrene tube 3 cm long for the output of the pump mounting cord.
- Several bars to secure the grid on the bowl.
- Flat stones, which consists of a visible decorative base of the fountain, and a few more details, visually represented in the diagram (tap, adapter, filter).
ROOM PUMU under the fountain
Deepete under the fountain. Make a "with a margin" so that the waterproof water tank (bowl) stood there freely, because after installation it will be necessary to strengthen it in the ground, falling asleep with the sand space between the reservoir and the soil. Sand should be thoroughly shed with water, and on top to spray with stones so that he will not fall into the tank with water. The reservoir pit should be 5 cm deeper than the height of its side. Immediately point the groove from the fountain to the power supply source for the subsequent gasket of the pump power cable.
Before putting the tank in the hole, pour it off the bottom of a small pebble to a height of 5 cm, then install the tank and strengthen it. Then measure the distance from your future fountain to the source of electricity and take the same length of the pipe cut (you can take a pipe from plastic). Cut the power cable from the pump through the pipe from the pump, lay the tube into the roof in advance the groove, insulate it from both ends and pumped up soil.
We put in the reservoir of the water pump
Immerse yourself in the "Heart Fountain" reservoir - a water pump, which will provide a fountain vital activity. It is worth noting that the pump should be freely placed in the tank so that it can be easily obtained for preventive service.
Close the reservoir grid
To in the reservoir where the pump is installed, garbage and foreign objects are installed, it must be closed with a metal galvanized grid, on which make cuts for free access to the pump and electric shut.
Stay Bar
Now we do the foundation for the fountain of durable bars with a cross section of at least 50 x 50 mm (we do not want our handsome-fountain to fail in the tank?)) Bruce to put on top of the metal mesh. They must be longer than a yam of the reservoir by 8-10 cm from each edge. And before laying the bars, it is necessary to attach to the pump segment of the metal tube (diameter of 1.5 cm), in which water will be supplied to the top of the fountain. The tube must be higher than the estimated level of the fountain by 8-10 cm.
Drill holes in stones
In each stone prepared for the garden fountain, in the center we drill holes with a diameter of 5-6 mm larger than the diameter of the metal tube, to which these stones we will plant. For work, you can use a perforator or a shock engineer. When you become drilling stones, periodically water them with water and the drill does not overheat, and the stone will not crack from a strong shock load.
Here we are with you and made the simplest fountain with their own hands. According to such technology, you can create such decorative fountains:
All the colors of the rainbow will play a murmuric driver if you install decorative backlight from the fountain. And if you buy inexpensive sprayers for fountains (better not plastic, but bronze), you can achieve a very beautiful dispersion of water.
Caring for your new building is very simple: change the filters for water in time, twice a month replenish water in the tank, and for the winter all removable pieces of the fountain are better to remove and remove to spring, a hole for a tank to cover with boards or piece of plywood.
Try, experiment! You may come up with something your own and share your invention with us))
Why you can not postpone the pregnancy
Effect from regular use of home recipes
Features of the structure of the neck