Fastening plastic pipes for canopy from rain. A gazebo of plastic pipes with their own hands: Types of material, installation of connections. With fixed columns

Separately standing canopy - gazebo

Before starting to build a canopy in the country, you should decide on the design. It can look different.

It can be represented in the form of a terrace, a visor over the construction or it can imitate the porch.

Varieties

Sheds are attached to any structure or separately worth. The attached models are a design, one side of which is adjacent to the wall, and the three others remain free, open. Separately standing models are a kind of gazebo or canopy to cover the car.

As a material, wood, iron or plastic are used to manufacture such structures. The last type of material is most often used for the manufacture of country constructions.

Make a country canopy from PVC pipes with your own hands. Examples of canopies created from PVC plastic pipes with their own hands can be viewed in the photo.

Advantages of PVC pipes

the design of plastic elements will last for quite a long time (the service life is much larger than that of wooden / metal products);
thanks to the small weight of the elements, the installation will not take much time and strength;
you can build as a collapsible design and monolithic.

However, such material has one negative moment - fear of low temperatures.

Canopy from PVC pipes do it yourself

From plastic pipes in the country, you can create a canopy, both for the playground and for the car. The village canopy of plastic PVC pipes can adjust home or stand separately.

What do you need for installation?

For work it will be necessary:

sandpaper;
file;
line;
construction hairdryer (with its help it will be necessary to heat plastic);
welding machine "Iron" (it is necessary for soldering elements).

Preliminary work

So, we will produce the design at the calculation that the length of the machine does not exceed 3.5 m. First, the drawings of the future structures are composed. Then, according to the size of the future erection, begin to cut the details.

Important detail: The design can be both national team and monolithic.

When choosing a second option, we should consider places in which you will fix the supports to the site / floor. Pipes with a large diameter will be played as a support (the cross section should be greater than that of horizontal elements on ¼ inches).

Billets

In order to determine the desired number of sliced \u200b\u200belements, you need a perimeter of the future parking to divide one and a half meters. As a result, it gets about four tubes for three and a half meters.

Pipe size

Roof shape

The roof can be arcuate, scope or bunk. The selection of the form depends on the place where you will install and control the liquid drain sling.

One of the options for connecting elements

To connect the details you can use fittings.

Currently, there will be no good work to acquire accessories:

calves (for connecting under the tilt);
tees (for connecting vertical and horizontal parts);
clamps (used for mounting to the surface);
plugs (thanks to them, dirt does not fall inside the item).

Of course, this is not the entire list of fittings.

Sports assembly technology for dachas from PVC pipes

Connect the parts using a welding machine. However, such equipment is not cheap, so if you do not have it, it is not worth purchasing. Fasteners can also be carried out using self-tapping screws, screwdriver, glue and bolts.
Collect design strictly according to the scheme.
You can install visors.
Fix the construction of clamps and dowels.

Also from PVC pipes you can build a summer soul canopy. The curtain will serve as a film.

Video about creating a simple attachment

What is the secret of the popularity of polycarbonate canopies? Why do this material choose more often than others? Is it really all possible in low cost, or are there any other features about which it is worth knowing? How not to be mistaken, choosing a canopy to the house for the first time? How can this design might look, and why is it generally needed? We have prepared all the necessary information about the canopies and visors from polycarbonate, and also chose 50 best photo examples!

Order canopy?

At prices there are promotional canopies - a canopy for a turnkey machine 3.6 x 6.3 \u003d 63.000 rub !!!
A canopy for 2 turnkey machines 5.7 x 6.3 \u003d 128.000 rub !!!

The required welding is performed in the production process using protective gas, which ensures high quality welded connections.

Also in the factory conditions, painting is performed. High-temperature drying of the colored layer provides high strength and quality of protective outdoor coating.

The strength of our designs is provided with correct load calculations (all calculations meet the current standard).

The terms of production and supply of ordered structures are stacked in 2 weeks. Installation of construction takes one or two days.

Nauzov number	size of a canopy on the roof, sh * d	size by extreme racks, sh * d	3d sketch with dimensions	circled Square	sport price, including installation and delivery (turnkey)
Width of canopies 3.4 m.
3	3,4 * 5,3	3,0 * 5,0		18	61 490
4	3,4 * 6,3	3,0 * 6,0		21,6	69 190
5	3,4 * 7,4	3,0 * 7,1		25,2	77 990
6	3,4 * 8,5	3,0 * 8,2		28,8	82 390
7	3,4 * 9,5	3,0 * 9,0		32,5	92 290
width of sheds 4.4 m.
16	4,4 * 3,2	4,0 * 2,9		14	46 090
17	4,4 * 4,2	4,0 * 3,9		18,5	60 390
18	4,4 * 5,3	4,0 * 5,0		23,2	71 390
19	4,4 * 6,3	4,0 * 6,0		27,7	80 190
20	4,4 * 7,4	4,0 * 7,1		32,4	92 290
21	4,4 * 8,5	4,0 * 8,2		37	104 390
22	4,4 * 9,5	4,0 * 9,0		41,7	115 390
23	4,4 * 10,6	4,0 * 10,0		46,3	120 890

Why people choose polycarbonate

Let's deal with what is this material. Polycarbonate is a solid polymer plastic. It is widely used not only in construction, but also for the production of lenses, CDs, computer parts.

May be:

Cellular polycarbonate is a few thin plates interconnected by jumpers. In the transverse section, the sheet is divided by cells, and the air located in them provides good thermal insulation properties of the material.

The monolithic polycarbonate is a solid sheet of polymer without voids and cells. This is a universal building material that has excellent light light, and can replace ordinary glass.

Among the benefits of the material it is worth highlighting:

Affordable price. Polycarbonate is cheaper than metal, glass and wood.
Light weight that provides ease of installation. Cellular polycarbonate is 16 times easier glass.
Fire safety. It does not ignite and does not contribute to the spread of fire.
Resistance to temperature drops. Polycarbonate perfectly tolerate operation in the temperature range from -40 to +120 degrees Celsius.
Reliability and durability. Properly made canopy from this material will serve you not one decade.
Flexibility and plasticity. You can create structures of various design forms.
Variety of colors. Polycarbonate is produced by all possible colors, which makes it possible to choose the material, perfectly inscribed in the style of the building.
Easy of care. To clear the coating of the canopy from pollution, you will not need expensive detergents. It is perfectly washed with ordinary soapy water.

It is not surprising that with such a number of useful properties, polycarbonate is so popular as material for the construction of canopies. Let's figure it out with how can there be a canopy to home?

Visor over the entrance

The visor over the entrance is the protection of the porch from rain, snow and other adverse factors. It can be attached to the building on the suspension or installed on additional supports. The frame of the frame is a tree, steel or aluminum.

Very nice and interestingly look at the polycarbonate on a wrought carcass. Floral motifs, complex geometric forms of wrought elements give the appearance of the visor of luxury and chic. Such structures fit well into the style of ancient buildings and classic private houses.

A canopy over the inlet of polycarbonate not only perfectly performs its main function, but also serves as a harmonious supplement of the exterior, and in some case - a bright emphasis that can completely change the visual perception of the appearance of the house. Due to the variety of colors, the material can be perfectly pick up the color of the building.

Canopy for car

The advantages of building a canopy to the house for the car are obvious:

When designing such a design, the dimensions of your car are taken into account, and such a part of the building is chosen, to which it is convenient to drive up.

Cozy terrace

A common option for installing a carport of polycarbonate to the house is the creation of a terrace for summer holidays. It can be placed immediately before the main entrance or with the lateral part of the building. Tables and chairs are installed, high fire safety material makes it possible to put on such a terrace of the brazier.

And this is another example of how the variety of colors allows you to make an ideal design to your taste. Under the fully transparent roof is very pleasant during a warm summer rain. It is said that behind flowing water drops can be observed infinitely. Toned coating will protect against bright sunlight and ultraviolet. Interesting lighting effect create bright sheets of colored polycarbonate.

Tree - Environmentally friendly natural material that has a pleasant smell

Where to order a canopy?

There are people who do not trust the masters in anything, believing that it is easier to do and cheaper. But this option is good only for those who professionally engaged in construction, clearly knows all the technology of the process, and besides, it can buy materials from acquaintances cheaper than in a construction store or on the market. What are the rest risks:

That is why it is worth trusting professionals! The company canopy master is engaged in carports, visors, arbors and greenhouses for 12 years. In our arsenal - hundreds of successfully completed projects, the quality of which is confirmed by the life of their operation.

The best masters who not only know and love their work, but also belong to him with a maximum responsibility, will make you a canopy by individual order in just 2-4 weeks. You will be pleasantly surprised and daily help of competent, which will answer all your questions.

Do not waste time and forces in vain. By ordering the product today, you can enjoy a great holiday in the near future.

Message
Sent.

Hello everyone! In this master class, I will show how to make a simple and easy canopy type of visor over the entrance to your home. Everyone knows the problem when during the rain, water is a large stream from the roof, besides the fact that it is rain. That's just to avoid this, constantly have a dry threshold in front of the entrance, I suggest building this simple visor over the door of plastic pipes.

It will be necessary for the manufacture

PVC pipes. But no one bothers to make a similar from polypropylene pipes.
PVC pipe adhesive, if you use polypropylene - soldering iron for polypropylene.
Rectangle from plexiglas, acrylic, plexiglas or polycarbonate. Any of those listed.

Another common tool will also be required, which will be found in any workshop, even the worst wizard.

Making a visor for home

Decide with the sizes of the desired visor, count the angle of inclination on the eye. Ideally draw a sketch on the leaflet.
Then choose the diameter of the pipes that will go into business.
We start the assembly. Cut pipes, prepare fittings.

First we collect two corners:

Then the third direction for these triangles.

We combine the longitudinal guides of the third side of the triangles among themselves. It will be the roof to which the transparent sheet of acrylic will be attached.

Connect, triangles turned out. Also added a longitudinal guide to the bottom of the visor.

In general, the more guides, the better.
Take acrylic glass.

We screw to the frame through rubber-like lining. They are certainly not binding, but thanks to them, an extra vibration is shuffled, the glass is not included in the resonance, and dripping droplets on the glass is not heard at all.

Today, you can pick up various materials that are suitable for the device of the summer gazebos on the household territory. Many of them are not at all intended for use in construction, and, nevertheless, are considered relevant due to their low price and ease of operation.

One of these materials includes plastic pipes. Of these, you can build a great gazebo with your own hands. The construction of such a design takes a minimum of time, and the end result will be reliable and practical. The appearance of the facility may differ among themselves, everything depends on your creative mood and fantasy.

Positive aspects of PVC

A classic gazebo is usually built of wooden beams, bricks or metal profiles. However, in the last period, plastic began to use in great demand from which water pipes receive. They can be applied to the construction of a gazebo or canopy. Such pipes have a number of advantages:

Long service life.
Resistance to aggressive effects of the external environment.
Ease of installation.
If necessary, the design can be easily rebuilt by increasing its space.
Build time with your own hands. Even an unqualified person to cope with the task of about an hour.
The ability to disassemble the design and move to another place.
Low price.

Given its simplicity, a gazebo of plastic pipes is reliable and will fully fulfill its function.

List of essential materials

To build a canopy of PVC pipes, you will need:

A set of plastic pipes - their dimensions and numbers may be different, it all depends on the specific project.
Finishing material - compacted fabric, tarpaulin or polycarbonate.
Loops for connecting to a cloth.
Armature or metal pipes for installation in the ground.
Plastic fittings of different diameters.

You can replace PVC pipes to other varieties, for example, to build a gazebo of polypropylene pipes with your own hands or use metal-plastic.

The design of the design is unlimited. An interesting decision will be the execution of the arbor in the form of an arc. How to make such a structure and similar types of canopies, then we will tell us in stages in our article.

Step-by-step construction plan

The organization of a summer arbor will include such steps:

Installation of pipes and supports.
Assembling upper strapping.
Creating a roof frame.
Finishing work.

From the tools it is necessary to take a shovel to bury the supports, it may also require a special hairdryer, by which you can bend rigid pipes from polyvinyl chloride. The connection of the parts will be made using fittings, the welding device is not necessary.

Before starting the installation, you should prepare the finish material. If you need to use a tarp or other dense waterproof tissue, you need to prepare the web in advance and add material at the edges. After that, durable loops of the fabric are cloves. Through them will pass pipes.

Given the specific project, various methods of fastening finishes are selected. In some cases, the upper strapping is used as a cornice. Be sure to organize a convenient regulation of the degree of sore shaders and make protection from strong winds and precipitation.

Polycarbonate sheets can also be used for decoration, plus that the preliminary organization is not required, since the material will be fixed itself to the already assembled structure. Such a gazebo will be overhaul, since her disassembly will take a lot of time.

Installation of support pillars, risers

After marking the site, you can start to score pillars. Used for reliable installation in place and in order to give the design of stability. Without the installation of strong supports, the plastic canopy can easily be blown away by the wind. The design can be removed for the winter, however, to move it to another installation location will be problematic.

The process is simple, first the steel pipes of the desired diameter are vertically installed in the soil at a depth of 20 centimeters. The number of tubes can be different, here you need to repel from the specifics of the project. It is not necessary to install in the ground of the cross-section tube, which make up the frame of the walls of the arbor. If the canopy is small in size, then it is best to put on the 1st support in every angle.

After installing the supports, PVC pipes are placed in the ends of these columns. It is important to take into account that supports should be approached with plastic pipes. PVC pipes should close the support poles as close as possible.

If there is a need, instead of the supporting tubes you can take thick reinforcement pins. Here already plastic will be inserted not in the middle of the supports, but on top of them.

Top strapping

At the upper boundary, the risers put the rings from plastic tubes. It will rely on the construction of the roof and finishing material. Based on the variety of canopy, the connection of parts can be carried out by various fittings. Thanks to it, you can combine from 2 to 4 tubes with different angles. Ultimately, we have a rigid basis, which will only "wear" the roof frame.

May be needed:

Tees for assembling 3 pipes at an angle of 90 °
Extension cords for compiling 2 parts at an angle of 180 °
Corners for fastening 2 components at an angle of 90 °

Crossing the roof

The roof is not a mandatory element of the arbor, and its installation is simply complicated by the construction process. The optimal solution in this case is to cover the tarpauloster between the tubes of the upper strapping or even easier - to make a gazebo without shelter (but then there will be no protection against sunlight, wind, rain).

If the roof is scheduled in the project - then boldly proceed to its creation. It is performed similarly to the upper strapping, namely, thanks to special fittings that are installed in the upper strapping of the canopy. Roofs can be all sorts of: duplex, multicate, flat, high, etc.

The easiest way to do not design the roof, but to independently build a gazebo in the form of an arc or dome. The upper strapping will act as roof.

The roof of the rigid frame is usually cooled by a solid polycarbonate. It can be winter and not removed.

Frameworking material

From the point of view of scenery and protection, the gazebo is trimmed with almost any suitable material. We often use tarpaulin or polycarbonate, but an opaque polyethylene film is also relevant.

Due to the fact that the canopy of plastic pipes is most often folded and removed until the next season, polycarbonate is not the most suitable option for this. For collapsible buildings, the canvas made of durable fabric, which are fixed on the tubes of the upper strapping using steel or tissue loops. Such a finish can move aside, but with strong winds it should be consolidated, for this you need to pull the tissue between the racks and fasten with screws.

Polycarbonate sheets are more reliable and much better protected from winds, but at a cost more expensive than fabric, plus everything is more difficult to remove. Such a trim is relevant if the construction of the pipes will be overhaul.

The methods of combination are selected taking into account the specific design of the arbor.

Some features

Quite often, the organization of the arbor is performed by another method. For example, instead of the casing tube are installed in the soil reinforcement pins fixed to the lower strapping boards.

A few words about furniture. You can also make furniture with your own hands from PVC pipes using fittings.

For the floor, it is better not to resort to the bottom strapping, because there is a high probability of discrepancy. For the floor, the columns are installed and lags are placed on them. Usually, the lag is used as a lag with dimensions of 100x50 millimeters, and put it preferable to everything on the edge.

On top of these lags steering milking floor. The boards that go into the course, a thickness of at least thirty millimeters. With a large length of the board of the board between lags, a material with a thickness of forty millimeters is used.

conclusions

Describe a summer arbor from PVC pipes - an uneteced task for anyone who wants. The process will not take too much time, and professional skills are not required. The main thing that must be followed is the safety equipment during the entire operation of the gazebo. After disassembly made of the canopy, the support parts should be closed to eliminate the possibility of injury and avoid corrosion.

Conventional plastic pipes are so universal building material that they can be used far from only to organize a water supply system: from pipes create unique furniture, building greenhouses, make beautiful vases and hiking chairs, bracelets, lamps, curtains for curtains, flowers, colors, Heated towel rails, greenhouses and even animal pens ... just do not list. This article provides information on how to make a canopy of pipes with your own hands.

Preparatory work

Regardless which the canopy model is selected for construction, it is required to carry out a number of preparatory work. First of all, we are talking about the choice of a seat under a canopy, and in the second - about its processing. Any canopy is a car or decorative, it serves not only protection against bad weather, but also performs the decoration of the site, so the choice of place should be approached with this.

What should be considered first

When planning a future building, you need to consider a number of factors:

What will be used canopy. From the answer to this question will depend on the size of the canopy, its form and the need to organize the foundation, gender and walls. The functional purpose of canopies is usually either economic (for protecting property and vehicles), or applied (organization of space for recreation, children's games).

If the white pipe color seems impractical or too provocative, you can paint their balloon paint on plastic. Silver paint will make the pipes "steel", beige - "bamboo", and brown - "wooden". When organizing a canopy over the children's playground and all colors of the rainbow can be at all.

What will be the design of the canopy. The design of the canopy may be temporary or constant. Thus, stationary canopies for vehicles use all year round, and the canopies for protection from the Sun are usually dismantled for the winter. If the canopy is collapsible, it is necessary to take care that the assembly and disassembly of the design does not occupy a lot of time and effort. If it is a monolithic design, you will have to take care of its strengthening so that neither the wind nor the snow could damage it.
Where the canopy will be located. Choosing a place for a canopy, should be taken into account how coincides with the functional purpose of the canopy. When choosing a place for tea drinking should pay attention to how it will be lit by the sun during the day and what is visibility from this point.
What will be the supports. What pipe for a canopy will suit as a support? Depending on the load from the roof, you should calculate the thickness of the support pipes and their number. If there are conventional curtains as the roof, the support pipes may have a minimum diameter. It should be known that the arcuate and angular roofs are experiencing the smallest load when rain and snow come across them. The roof may also be arched, single or double. The more difficult it will be its design, the more serious will have to think about strengthening the supports.
We choose the roof material. Choosing a material for a canopy, it should be guided by its appointment. For temporary structures, it is necessary to choose lightweight materials that can be dismantled and reuse, and for constant - reliable and durable. If it is planned to be a light country canopy from PVC pipes - curtains from the bathroom will greatly cope with the role of the roof. But the cellular polycarbonate is perfect for the shelter of the car, but during the construction of the arbor - no. It is connected with the fact that he strongly misses the light and delays heat, and therefore people under it will be hot and they will not be able to hide from the sun.
Place for canopy. Before installing a canopy, a platform should be prepared for it. To do this, the base is purified from garbage, align and tram. Places to install supports, opposite - soften.

When installing supports for a canopy, you should specify whether electrical cables and water pipes do not pass under the ground.

Possible models of canopies

A canopy of plastic pipes can perform a variety of functions. Below are the most common tasks of this building:

cuts people from the sun and bad weather;
shelters from rain and snow firewood and tools;
protects the car from precipitation;
creates a shadow on the playground.

Accordingly, the tasks of the canopies may have different incarnation - from the simplest to serious building structures.

The photo shows a model of a canopy designed to protect the vehicle.

Plastic canopy for cars

But the example of a tunnel canopy created to protect against the sun. This design is an excellent basis for grapes or bill.

If you wish to build a chicken coop, a canopy of PVC pipes will be an excellent solution: it is easy to build, it is easy to disassemble, but it is worth such a building at all inexpensive, and in the care of unpretentious.

Instructions for assembling a canopy

How to make a canopy from the pipes with your own hands? Below is a step-by-step instruction, describing in detail the stages of the work on the assembly of the carport of plastic pipes and the shower curtain (photo above).

Required tools and materials

In order to make such a canopy with your own hands, you will need:

Two identical plastic pipes (length depends on the required height of the canopy).
Dense waterproof tissue (you can use the usual shower curtain).
The strip of dense tissue, the length of which is equal to the sum of the length of two plastic pipes.
Four steel pipes 20 cm long will serve as a kind of foundation for plastic pipes, so they must have a slightly larger diameter than PVC pipes.
Sewing machine and dense denim threads (desirable categorous).

Order of work

Build a country canopy from PVC pipes follows all the necessary preparatory work: the definition of the place and its preparation for the placement of the structure. After that, you can proceed to the main work:

On the platform prepared for a canopy should be marked, providing for the places for the supports. The markup should be carried out taking into account the existing waterproof web - so that it sufficiently covers the required area. Tags for supports must be completed in four places, opposite each other.
After that, you should drive the steel pipes in those places where the supports (markings) will be inserted. Approximately 2 cm of each pipe should remain above the ground. Subsequently, plastic pipes will be inserted into these wells.
Next, you should cut off the plastic pipes of the desired length. The length of the pipes in this case will be equal to the necessary height of the canopy (multiplied by 2), taking into account the distance between the supports multiplied by 1.5 (since the roof of the frame will be rounded).
At the next stage, it will be necessary to sew a canvas that will serve as a shelter from the sun and rain. The width of the canvas will be equal to the width between the supports minus 10 cm on each side for the loops. As for the length, everything depends on individual preferences here. It is believed that the canvas should be approximately half off to overlap the facade plane of the future canopy.
The carved canvas should be used along the edges with a dense tissue in which the pipe will be inserted. Alternatively, instead of a solid pocket for a pipe, separate loops can be made. The loops are sewn at a distance of no more than 10 cm from each other.
After preparation, the awning can be started to assemble a canopy. For this, the canvas dressed on the pipes, and the pipes after that are inserted into the prepared wells. It will only remain to correct the awning, adjusting its height.

The country canopy from PVC pipes is ready! If, when studying this description, some questions remained, you can familiarize yourself with the video structure.

The folk savings have no boundaries, which confirms the variety of crafts that crafts are created from the girlfriend: furniture - from plastic bottles, concrete mixer - from a washing machine, and canopy from pipes. We hope that the creation of a canopy will now become a simple task for readers.

Today you can find a variety of materials suitable for creating a summer gazebo on the household plot. Some of them were not even designed for construction initially and apply only due to their low price and ease of handling them.

One of these materials is PVC pipes from which you can collect the collapsible gazebo with your own hands. The process will not take much time, and the result will be durable, durable and comfortable. The design of the design can be the most different - from the capital to the simplest, as on the photo represented.

Advantages of PVC

The traditional gazebo is built by capital - from a wooden bar or brick. But in addition to standard materials, plastic has become widely popular, from which water pipes are produced. They can be used for construction of arbor or greenhouses. PVC has many advantages:

durability;
resistance to aggressive environmental factors;
ease of installation;
if necessary, the design can be easily changed by expanding the space;
the speed of the assembly with their own hands - even in an inexperienced person will leave no more than an hour;
the possibility of disassembling the structure and transporting it to another place;
low cost.

Despite its simplicity, the design of plastic water pipes will be reliable and will no complaint to perform their functions.

Necessary materials

To build a gazebo with their own hands, you will need:

a set of PVC pipes - their length and quantity can be different depending on the project;
material for finishing - dense fabric, tarpaulin or polycarbonate;
loop for fastening fabric;
armature or steel pipes for fixing in the ground;
plastic fittings of different formats.

Instead of PVC, the plastic pipes of another species can be used - polypropylene or metal-plastic.

The design may be the most different - there is no need to connect pipes to fittings. It is quite possible to arcuate design, as in the photo below.

Stages of construction installation

The construction of a summer arbor will consist of the following steps:

installation of support pipes and racks;
installation of upper strapping;
formation of roof frame;
finish.

The tools will only need a shovel for sticking supports and, if necessary, a special hair dryer, with which you can bend hard tubes from polyvinyl chloride. The elements will connect with the help of fittings, as in the photo below, so the welding machine will not need.

Before starting to install, it is necessary to prepare the finishing material. If the tarpaulin or other dense and waterproof tissue is used, you need to prepare the rope of suitable size and rinse it along the edges. Then a reliable loop of the fabric is sewed to the canvas, through which the pipes will then do.

Depending on the project, the fastening method of the finish can be different - sometimes you can use the upper strapping as a cornice to which the fabric turns on the type of curtains. In any case, it is necessary to provide convenient adjustment of the level of sampling and high-quality protection against wind and rain.

If polycarbonate sheets will be used for finishing, preliminary preparation is not needed - the material will be attached to their own hands to the already assembled design. At the same time, the gazebo will be overhaul, since her disassembly will be long and unjustified.

Installation of support pillars and risers

After the site is posted, you can roll the support poles. They are necessary to give the design of stiffness and to reliably fix the gazebo in place - without this, the lightweight structure of plastic can carry a strong wind. Such a fixation will not prevent removing the gazebo for the winter, but will create certain difficulties to move it to another place.

All simple - the steel pipes of the suitable diameter are vertically dug into the ground to a depth of about 20 cm. The amount may be different and depends on the features of the project. It is not necessary to fix in the ground each transverse tube, which is the frame of the walls of the arbor - if the structure does not differ in large sizes, it will be enough to wear one support in each corner.

After the supports are discharge, PVC pipes are inserted into its protruding ends. Because of this, the poles should approach the diameter to the plastic elements so that the latter just climbed the inside of the pillars. Conclusions about the complexity of this construction phase can be made from the photo above.

If necessary, instead of reference pipes, thick reinforcement pins can be used. Plastic in this case is not inserted inside the supports, but it is put on them.

Top strapping

On the upper perimeter, the installed risers will be connected by a ring of plastic pipes, on which the roof frame and the finishing material will be kept.

Depending on the design, the connection of the elements can be made using different fittings. They allow you to connect from two to four pipes at different angles. As a result, it should be a hard framework, which will only "wear" the skeleton of the roof.

Roof formation

The roof as a separate element of the gazebo is an optional part of construction, because in many cases it will also complicate the installation with your own hands. It is possible to simply pull the tarpaulin between the pipes of the upper strapping or the gazebo at all can be without shelter - of course, in this case, nothing will protect the owners from bad weather.

If the roof is included in the project, it is done in the same way as the top strapping. With the help of various fittings that are arranged in the upper strapping of the gazebo, you can get a roof of any type - double or multicate, flat and high.

It is much easier to do not make a roof - it is better to make a gazebo in the form of a dome or arch, as in the photo above. Top strapping in this case will play the role of the roof.

As a rule, a frame rigid roof is further fried by a solid polycarbonate and is not removed in the offseason.

Saving framework

In decorative and protective purposes, the resulting gazebo is separated by any suitable material - most often it is tarpaulin or polycarbonate, but an opaque polyethylene film can be used.

Due to the fact that the simple plastic gazebo usually disassembles and is cleaned during the cold season, the polycarbonate may not be the best option. For the collapsible structure, the canvas of dense tissue are perfectly suitable, which is fixed on the topping pipes with steel or tissue loops. If necessary, such a finish can be moved, but in case of wind, the finish can be fixed with a hard way, stretching the tissue between the racks and attaching screws.

Polycarbonate sheets are stronger and better protected from wind, but much more expensive than fabrics, and also much more difficult to remove. Therefore, this trim makes sense to do only if the gazebo is capital.

Methods can and combine, as in the photo below - for example, make a roof of polycarbonate so that the rain is not exactly inwarded, and the walls to break the cloth. It all depends only on design design.

Thus, it is very easy to assemble a gazebo of PVC pipes very simply - the installation does not require a large amount of time and special construction skills. The main thing is to remember the safety technique throughout the operation of the construction. So, after disassembling the design, the support pillars should be closed due to the possibility of corrosion and injuries.

Country plot is a great place to relax in nature. If you do not have a place on it, under which you can hide during the rain or midday heat, then you can make the simplest canopy of plastic pipes for water pipes.

Mount this design is very easy, while it will be foldable. At the end of the season it can be folded and stored in the barn.

Production of a simple design of pipes

To work, you will need the following.

Two plastic pipes from polypropylene, polyethylene or PVC, a cross section of 20 mm.
Tight matter, better if it is waterproof.
A strip of durable and dense fabric.
4 trimming of steel pipe, cross section of 25 mm, about 20 cm long.
Needle with thread or sewing machine.

Getting ready for work

Originally decide on where you will build a canopy.
Next you need to mark up. Note that the design will be arched, with an awning stretched on it.

Note!
The optimal option is to make 4 marks at the same distance from each other.
At the same time, take into account the size of the canopy, which will depend on which furniture will be under it, and how many people it will have to accommodate.

Take 4 sections of pipes, their inner cross section should be slightly exceeding the external diameter of the frame elements. Drive them in the points noted.
Do it until the moment over the level of the soil will not remain stitching the sections of 2 cm high. The result of your work will be peculiar "bushings." They will need to insert pipes from plastic.

Installation of the facility

Prepare two cuts from the polymer pipe. The length of them can be calculated, submitting 4, as the sum of the desired height of two walls + 1.5, because the top of the frame will have a round shape.
Next, you should sew a material that will serve as an awning. The instruction notes that its width should be 1.8 m, because with each side, the gaps from the tissue to the pipes should be equal to no less than 10 cm.

Note!
Especially it should be said about the length of the tent-canvas.
Specialists suggest that it should overlap, minimally, 50 percent of the useful area of \u200b\u200bthe plane of the future facilities.

A cooked piece of material should be used on its edges. Further, in the length of the cut, it is necessary to strip double bands from the fabric. Through them, then it will be necessary to skip the carcass pipes. These elements need to be sewed with a pitch of 10 cm.
Now you can collect a canopy. First of all, put the awning on the pipes.
Next, insert them into the sleeve, driven into the ground.
In this case, the framework elements will be bent in the form of the arches.

Last queue, spread the awning, giving it an optimal position.
Canopy, whose price is minimal, ready.

How to give tissue tent water-repellent properties

If you do not have a special moisture-repellent tissue, it can be made independently. So you will receive a material for the awning that securely protect the space inside the canopy from the rain.

Below are three simple ways, do it.

Stir in 750 milliliters of water 250 grams of casein glue and 12 grams of lime. In another container, prepare a soap solution containing 1.5 liters of water and 15/20 grams of the economic soap.
Connect the liquids and mix well. Lower the cloth into this mixture. Give it well impregnate, remove, press and let me dry.
If the material is linen, or cotton, divert in 8 liters of water 125 grams of gelatin, as many household soaps and 300 grams of alum. Put the solution on fire and bring it to a boil, not forgetting regularly mixing. Lower the canvas to this mixture, wait 2 hours, then remove and dry, without pressing.
Cover 100 grams of children's soap in 3 liters and mix. Preheat a mixture of up to 50 degrees and plunge the material for 30 minutes. Then two times to 15/20 minutes extinate the cloth in alumokalia quasans (10% solution).

After the procedures, the material must be rid of cool water. Then it should be dried.

Pavilions ready-made

Now manufacturers produce prefabricated arched and rectangular canopies from polymer pipes.

Analogs under the garage, for the pool, or as a pretty to the household house, have a width of 3 or 3.5 m. Their frame is assembled from (20 × 20 × 2 mm) in a shell of polyvinyl chloride.
More overall designs for gaming, sports and economic pavilions have a width of 4 or 5 m. Their frame consists of double profile pipes, also in protection from PVC.
The length of such a design can reach 8 m.

Note!
Due to the polymer coating, the service life of the structure increases, it acquires the aesthetics of appearance and reliable rust protection.
Two-storey arcs are easy to transport.

Under such a canopy there is no need to build a foundation. It is enough to drive a 100 cm long pin into the soil, and put on it an arc of two elements and secure them with a self-tapping screw.

If you decide to purchase and collect, for example, from PVC pipe with your own hands, keep in mind that it can include mounting glasses for the framework of the frame.

Output

Arrangement of a canopy of plastic pipes will not require capital investment and labor from you. As a result, you will get a lightweight construction that can protect you on the site from the sun and rain. The video in this article will reveal the fuller theme.

If you are not ready to pay serious money for an adhesive iron or profile pipe, then the alternative can be classic plastic pipes. Thanks to fittings, you can achieve reliable compounds, and applying some tricks to the foundation, you can fix the plastic gazebo is no worse than the classic building.

PVC pipes are cheap and lightweight, which has its drawbacks and advantages over other construction materials.

If you comply with all the installation requirements, you can build a very good frame, and you will choose the trim as soon as possible.

In this publication, we consider the variety of plastic pipes, as well as the options for arbors from this material. Then the process of building a polypropylene arbor will be shown, where the main focus we will do on the connections between its parts.

Polypropylene (PVC)

Initially, plastic pipes are conceived as part of the plumbing and heating system. Installation occurs with the help of a special soldering iron (we are affectionately we call "iron") and couplings.

Polypropylene has stunning characteristics, which are also suitable for our country construction:

Strength.
Flexibility.
Low weight.
Does not require additional processing.
Low price.

Metal plastic

Compared to polypropylene, metalplastic is more expensive and reliable in the plan of the pipeline. Due to aluminum foil inside, there is no expansion of the material at high temperatures, which is positively affected by the service life.

Construction of metalplastic (difference from classic polypropylene in aluminum layer)

Since we are on a drum, it expands there or not, we look at the methods of installation and technically characteristics. The compounds differ significantly from polypropylene, as the press and crimp fitting is used.

For the crimping option, we will need an additional tool, and in the case of the press there will be enough two adjustable keys.

Variety of plastic pipe arbors

With fixed columns

If you take pretty thick pipes and fix them in the foundation, then you can make some kind of cape and the tent. The roof is best to see the most lightweight material, such as a cloth or polyester, so that the framework is not deformed when the wind gusts.

With arcs

Due to the flexible form, from plastic you can make a decent arcuate gazebo with a polycarbonate sheets. Such a building is perfect for the garden to break the breaks between troubles.

Portable

Ease of material allows you to make a very easy gazebo, with the mass of which even one person will cope (in the absence of a heavy roof or trim). If you do not fix the gazebo to the ground using the foundation, then it can be completely rearranged from place to place, depending on the need.

Installation of polypropylene connections through coupling

To work, we will need the following tool and building materials:

Polypropylene pipes.
Couplings (straight, corner and tees).
Special scissors.
Soldering iron special.

Installation instructions are presented in the picture below. According to this principle, the entire frame of plastic gazebo is collected.

Installation of metal-plastic connections through fittings

Working with metal-plastic will require an additional tool - press clamp. The price of each connection will be significantly higher than simple polypropylene couplings. Therefore, if you plan to build a similar gazebo, try to make as few connections as possible to save on this moment.

Installing columns

To impart the stability of the frame, it is necessary to fix the vertical poles to the maximum tightly (racks). To do this, you can use metal pins or full-fledged foundation pillars made of concrete (the fumes rushes and is poured with a solution).

In any case, this moment needs to be thought out in advance. If the metal can be freely put on the tile and it does not go anywhere due to its mass, then the plastic may well "escape" from the gust of the wind.

Crossing the roof

The rafter system cannot be made by the type of wooden or metal roof. It is necessary to use the shape of a truncated cone with several rapid legs, which will create a durable frame for further trim. An example of this roof is shown in the photo below.

Polycarbonate sheathing

The design of pipes is durable, but extremely unstable. To securely fix the entire structure, it is necessary to strip the framework. Polycarbonate will come to the aid, which by weight and strength is ideal for mounting.

Protection Arbor from the Sun and Wind

An interesting version of the summer gazebos is represented as a tent. An ordinary frame of sixteen pipes is made (six on the pillars, four on the upper strapping and six on the rafters), and the light fabric or polyester, which performs decorative and protective functions, is performed on top of it.

In my opinion, this project deserves attention, since its cost is kopeck, and it looks very civilically.

Video device for the manufacture of pipes from pipes

In truth, it was not possible to find more or less adequate instructions for the construction of a similar arbor, but about the creation of a canopy told even on the first channel.

The presenter will tell in detail and show the design of which plastic pipes is made, and also how it is fastened.