A set of home-based tools. How to distinguish professional power tools from domestic? Professional Bosch Screwdriver

Bosch blue or green: What is the difference? What bosh is professional?

Finding into the Bosch Tools Store, we often see almost identical perforators, screwdrivers, drills and grinders, differing only in the color of the case. There is a reasonable question of blue or green option to take and what is the difference? And the first thing that rushes into the eye is the difference in price. Green analog is usually cheaper and it also causes a lot of questions: why green is cheaper, he is worse? Let's try to highlight the main differences:

1. Green Bosch (Bosch) tool,
the so-called series "for home masters" or simply household

Designed for not very intensive use of the house or at the cottage, in the workshop. For good, comfortable storage and operational conditions. Neat and relatively rare application. Rarely - this does not mean that he can only drill holes a couple of times over a year, but in the repair of one apartment or the work of one person with several tools in the garage and workshop, green Bosch is good and will correctly serve for the time specified in his Sportsport. It is not assumed that according to the tool will go that it will be covered with cement dust, it will constantly fall from the cabinet or one drill you will drill a daily from 9 to 18 without giving hands.

Dachini and home masters are ready to carefully exploit and store tools, do not need continuous and intensive use of them. This determines quite affordable prices for this model range.

2. Blue professional tool.

Unlike domestic, this tool is not at all for comfortable, but for the harsh conditions of construction sites and production workshops!

Increased protection of nodes to shocks, and electronics to the penetration of concrete dust. Preserving performance when falling from a height of several meters, shockproof housings, special plastic, rubber and other materials for all elements without exception. At construction site or in production, anything can happen. Dampness, direct water sources (fog, snow, rain, water in wet drilling pumps), falling on the wires crushed stone and hand tools. Work and in the heat and frost. Everything should be superior and steadily to the external environment. Reliability and thoughtfulness to the smallest detail, on which not only the quality and convenience of work, but also the life and health of the worker!

The requirements for protection against noise, vibration and dust are constantly growing in Europe, forcing the manufacturer to continuously improve the nodes to clean the sound and vibrations, develop dustying systems, isolation, reduce the weight of the power tools, introduce the LED backlight of the working area, various system protection systems, jerks, and T . In order to preserve the health of a person who works with the entire working day tool! The Germans are well able to consider the costs of production injuries and caregings, their professional instrument with proper operation and accounting for all recommendations from the instruction one of the safest! Another manufacturer knows how to count the time, which is known for money for owners (developers, host hosts).

The tool performance is constantly increasing at the expense of the latest technologies. Faster cuts, drill, saw the tool itself, speeds up the process of innovative equipment, where everything plays the role: the newest materials, the shape of the cutting edges, discharge the chip chips on the drill, self-folding surfaces and other scientific parts. Such a durable snap and tool must be purchased less frequently, current costs fall. The time that the worker can keep in his hands a light comfortable and thoughtful tool grows. The convenient and aesthetic case of the cases and the L-BOXX tabs for neat storage, fast transportation and the rapid attitudes in order of work space again reduces the time costs and increases the company's image.

And of course, all these scientific and technical bells, the latest materials and innovative developments are expensive and determine the cost of the professional instrument. Hence its increased price, compared to household counterparts.

This is the price for quality, convenience, reliability, wear resistance, safety, durability and efficiency in the intensive work of a professional tool in harsh production or construction conditions.

Many prefer and keep at home just such a tool.

Yes, and all the innovations and know-how gradually "climb" on the household tool, ceasing to be so expensive for him. So the choice is always yours.

Bosch Monsobrand Tool Store is located at:
Moscow (m. Dynamo) Petrovsko-Razumovsky passage, D.5 ()

Here is one of the few places where most models of drills, bulges, perforators, jackhammers, screwdrivers, wrench, plans, saws, strokesov, etc. You can see "live", compare, pick up a snap or spare parts.
We work with the regions, exhibit accounts with VAT, we organize the delivery of the tool.
We work and as an ordinary wholesale and retail store for 20 years and more recently, as an online store with the delivery of the Bosch (Bosch) tool in Moscow and in Russia.

First of all, let's find out what the drill differs from the perforator, and only then we can answer the question how to choose a drill.

To date, almost all manufacturers are on sale represent the drill of the shock action. With the help of such a drill, the following types of work can be performed: drilling holes in various materials, including brick and concrete, wrapping and turning screws, screws and screws.

Perforators additionally offer the following features: drilling holes in particularly solid materials (reinforced concrete, stone), chiseling. Thus, at first glance, the perforator is preferable to drill, but on a par with the advantages, it has a number of shortcomings.

First of all, at the same power, the perforator is more expensive. Due to the features of the attachment in the punch cartridge, it is impossible to use conventional drills without a special adapter (which often goes as standard to the perforator), which lengthens the size of the instrument, creates an additional vibration and thereby makes the perforator less durable, reliable and convenient in operation.

A pleasant exception to this rule is perforators with interchangeable patron, one of the most successful representatives of these models in the price-quality ratio is the Bosch 2-24 DFR perforator.

However, if you do not need to perform a large amount of work with drilling in solid materials, then you can completely stop your shock-type drill. A good drill from this class - Bosch GSB 2-20 Re.

Rechargeable drills

The next thing is worth paying attention is a power source. Mainly use two options: from the network and from the battery. Autonomous power tool is advisable to apply where there are no sockets nearby, in hard-to-reach places and for work related to frequent movement of workers (it is very difficult to quickly move from one place to another, while the wire behind it).

The disadvantages of such a tool are short-term operation between recharging and a high cost of batteries (although many battery-tool models include two batteries and charger).

Professional and household tools

All power tools are divided into professional and household. Professional tool is designed for daily many hours. The quality of the materials used in its assembly is much higher than that of the domestic instrument, which significantly increases its reliability.

The plus of the household tool is low cost, low weight. Many firms do focus on ergonomics, i.e. Appearance, convenience in work. The household tool can be used in no more than 4 hours a day, and every 15 minutes need to take breaks about the same time.

Manufacturers firms also try to manufacture a professional tool in developed countries where workers have a great professional qualification. Accordingly, the production of household instruments, where the manufacturing technology is less complex, is transferred to less developed countries, because The working force is much cheaper there.

For example, the German company Bosch all the heavy technique, including professional perforators and drills, only in Germany, amateur, or "household" tool reclaims to produce China and Malaysia.

How to distinguish a professional tool from domestic?

First of all, manufacturers are trying to inform the buyer about what kind of tool it buys, marking its products by corps of different color. For information, a table is provided, where you can see what color in a particular stamp of power tools is a household and professional tool.

Now let's say a few words about the characteristics of the power tool. The main are: rated power, the number of revolutions, or rotational speed, the maximum drilling diameter. An important point is to adjust the speed of rotation. Almost all modern drills and perforators have this feature. The speed of rotation depends on the strength of pressing the start button.

Separately, it is worth noting two-speed drills. In these models, a mechanism resembling a car transmission is used for more rational use of power tool. A good version of a two-speed drill is tool of the company Bosch GBM 13-2 Re. The choice of the number of revolutions is carried out with the help of a wheel. The drill is equipped with a control electronics for accurate centering, thanks to the reverse is suitable for wrapping and turning screws and screws. Also, this drill can work in the rack of the drilling machine.

Types of cartridges in drills

1. Traditional, well-known cam or toothed cartridge, in which the drill is fixed using the key.

2. A quick-mode cartridge, in which the drill to fix the drill is quite a small hand force. The quality of the clamp of such a cartridge is no worse than the gear. There are single and two-sleeve speed-insulated cartridges. A two-sleeve cartridge has two rotating rings - for clamping and weakening. Simple in circulation single-sleeve cartridges (Press + Lock and Auto-Lock) offer the most convenient way to change the drill.

3. Tsanging SDS-cartridge. These systems are developed by Bosch. The most modern system is AUTO-LOCK. The spindle of the device is automatically blocked after the stop and simply turn the drill cartridge to replace and fix the drill. Such a carton is equipped with a comfortable 1-speed Bosch GSB 16 Reer and a powerful 2-speed drill Bosch GSB 22-2 Re.

Bosch GSB 16 Re Drill is equipped with an Auto-Lock fixture, convenient capture for work controlling electronics. Its power consumed is 650 W. Select the number of revolutions - using the adjusting wheel. Soft handle - to work without vibrations. Bosch GSB 22-2re Drill is great for performing the hardest work on drilling and screwing screws. Equipped with Auto-Lock, vibration control, revolutions electronic control wheel, safety clutch for safe operation, chrome drill cartridge, etc. Power consumption - 1010 W.

If you need an inexpensive good drill, then you can recommend Bosch GBH 6 Re. This drill is convenient when working in narrow places, when drilling above his head, as it is very compact and weighs little. Also equipped with electronics for accurate centering, a practical carrying clamp, completely on ball bearings for a long service life, a plastic housing is reinforced with fiberglass. Its power consumption - 350 W. Almost all models of shock drills have an analogues of the battery tool.

Now let's talk about perforators

Perforators are used for dragging and drilling in concrete and stone. With the help of a perforator and a special nozzle-chisel, you can very quickly remove any tile and tile. To do this, it is simply enough to turn on the rotation blocking, and the perforator will operate in the jacking hammer mode. The perforator can easily make small openings, recesses, cable channels.

The most interesting small perforators in the category price-quality are the following types:

Bosch GBH 2-24 DSR. Effective perforator with an optimized shock mechanism, rotation lock for light slot works, Vario-Lock system for fixing a chisel in 36 angular positions, blocking a strike for drilling in a tree and metal, electronic control for smooth start, etc. Power - 620 W.

Bosch GBH 2-24 DFR. In our opinion, the most decent perforator of its class. From the previous perforator, it differs from the fact that it has a quick cartridge change system (SDS-Plus - for SDS bores and quick-mode for conventional drills). In the previous model, the usual cartridge is inserted into the perforator by increasing, which lengthens the tool and creates an additional vibration when drilling.

Choosing a power tool, many consumers do not always imagine what is the difference between the professional and domestic instrument? It is often necessary to see a drill of unknown origin with a proud inscription "Professional" price of 1000 rubles, and nothing decorated with a drill from a brand company can cost up to five and more than thousand rubles.

Easy the choice will sometimes help special color marking. So, the professional tool from Bosch is available in blue, green goes like a household. But all manufacturers do not do this, so we will try to figure out what the difference is.

Professional Bosch Screwdriver

Bosch household screwdriver

How to choose a professional power tool?

Firstly, professional tool, whether drill or screwdriver, saw or plans, is designed for long commercial, i.e. For several hours daily, with rare short breaks (mainly for recreation worker, not tool).

Amateur power tool works no more than 2 hours a day or twenty hours a month in the "twenty minutes of work - the same rest."

Therefore, the first difference between professional power tools is high reliability and vitality, which are achieved by the best constructive working and high-quality materials. Where the household instrument has a sleeve or a sliding bearing, a professional ball or roller bearing, and even also closed.

For corpses of professional tools, more high quality plastic is used, often reinforced. For metal parts, alloyed, heat-treated steel are involved. In domestic power tools, as a rule, ordinary structural products without additional treatments.

The lubrication system is also distinguished. The closed bearing of one runs over the years, without requiring care, in the other during intensive work, the lubricant follows from overheating and the tool fails in a matter of a few weeks, if not giving it a rest every 15 minutes.

For reliability, which means, a long service life, a professional tool is equipped with a "Smooth Start" mode to reduce the current when turning on. Equipped with automatic shutdown of brushes with their limit wear, as well as automatic shutdown when overheating.

It has a plugging clutch in case of jamming the working body (drill or saw disk). A professional tool has better dust, primarily for the most vulnerable parts - engine windings and bearings.

SecondlyA professional tool designed for a long continuous work has a better ergonomics - a comfortable shape of the housing, non-slip handles, shock absorbers.

ThirdlyThe professional tool is better adapted to work at low temperatures. The network cable usually has a rubber outer shell, unlike chlorvinyl on household.

FourthFor "professionals" produced a wide range of nozzles, additional devices developed usually by the same company and intended for specific models. An example is tools and accessories "Hilti", "Bosch", "Demolt" and others.

Professional Hilti Tool

Professional Dewalt Tool

Professional Makita Tool

How to set priorities?

It is no secret that the price of the professional instrument is higher than the similar household, sometimes, 3-4 times. So choose what to stop on? Does it mean that in all cases a homemade master, acquiring a household instrument, is forced to throw it out of one hundred months, and professional will serve dozens of years without any care, working daily for several hours? Of course not.

In reasonable use (not to drill a household drill with a high-strength concrete for days, not to cut a lot of thick boards and chipboard, not to strict the low-power ruffle larch and painted boards), compliance with the recommended mode, timely sharpening and replacing the working bodies of the household tool even a little-known firm can live long Years.

Dear highly reliable power tools of famous brands like "Hilti" or "Felront" also needs to be care. Neglecting the manufacturer's recommendations on the principle: the tool is highly reliable, it will endure everything without any care - is fraught with a breakdown of expensive things.

About the reliability in the work of the Bosch perforators, the Russian user was convinced not to be superior. Various building forums lead users about the high characteristics of Bosch perforators, their operational reliability and convenience.

Bosch perforators are equipped with a dust removal system, a roll rotation stabilizer, a drill restriction of drilling depth, a "smooth start" system, a regulator of rotation speed, anti-love devices, overheating devices. This all refers to the original structures of Bosch 2-20, 2-24, 2-26 perforators.

But not everyone knows that along with the originals there is a substantive and fake. It fully applies to Bosch perforators.
And how to distinguish a real perforator from a fake or Chinese-made tool?

At once a few words about Chinese perforators of famous brands.
Chinese perforators, produced under the license or at China's plants belonging to Bosch firms (Dremel, Rotozip, Skil), are no different from Bosch perforators produced in Germany.

Recently, Western manufacturers are trying to post their production in China. The differences in the Chinese and corporate perforator lies in the system of acceptance of the finished product.
For Bosch perforators manufactured in China for Western Europe, there are two steps of control: the factory acceptance and acceptance is already in the buyer's country. Chinese perforators sent to Western Europe pass the factory acceptance, and upon arrival in the Customer's country, are checked and there with input control.
The remaining perforators who have not passed the factory control at the plants of China are departed in third countries. But they are made from the same details, on the same lines, the hands of the same workers. And cost 4-5 times cheaper. Quality is no different.

By buying any tool, first of all pay attention to the appearance.

Remember the golden rule: if the appearance of the case or the Bosch perforator differs from the original, inside can not be a branded instrument.

Classification of Bosch Perforators

Bosch perforators are conventionally divided into professional and domestic ones.
Household perforators weigh significantly less professional with power up to 900 W. Of the disadvantages of household perforations, we highlight the poor cooling of the electric motor and the high return when hitting.

The benefits of professional Bosch perforators include:

• high power;
• efficiency in engine cooling;
• presence of vibration damping devices;
• long operation.

Of the disadvantages it is necessary to celebrate two main: high prices and high weight.

How to determine the fake of the Bosch punch

In appearance, it is possible to determine quite easily, fake in front of you or original.
To start acquaintance with Bosch perforators, it is necessary to inspect the suitcase (case) to which the tool is stacked.

Definition of fakes on the appearance of the case for transporting Bosch perforators

After examining the appearance of a suitcase for transporting Bosch perforators, pay special attention to the inscriptions, various nameplates, latches, the quality of casting.

When examining the appearance of a suitcase for storing and transporting the tool, pay special attention to the latches. Bosch's inscription must be printed on them. For fakes of Bosch perforators such an inscription on the latches is simply not.

After examining the suitcase, pay attention to the magnitude of the gaps between the closing covers. The gaps should not be, or the minimum clearances around the perimeter should be the same everywhere. In fakes, the lid fit loosely, with a breakdown. On the lids are visible by the casting, burrs.

Pay attention to the proprietary inscription on the suitcase. The suitcase is the original sign and the inscription convex, made by casting, the so-called 3D signs. The suitcase-fake inscriptions are pasted and easily skipped with a nail.

Fake perforators on the back of the suitcase passes a special sticker with various codes, inscriptions and ciphers. Do not pay any attention to it.

It is designed to distract your attention from fake. The original has such a sticker missing.
On the back of the suitcase of the original, the inscription Bosch and the signature sign are postponed. There are no inspirations on the fake.

To distinguish the fake Bosch perforator from the original, it is necessary to buy a power tool in specialized stores with the design of all necessary documents.

Video definitions of fakes of the Bosch Perforator in appearance suitcase for transportation.

Open the suitcase.

Definition of fake on the appearance of the Bosch perforator housing

On the original housing, all inscriptions and badges are applied by the way of extrusion. In fake punching of the inscriptions, either pasted on the film, or each letter is pasted. These inscriptions and letters are easily dying when picking a nail. The original it is impossible in principle.

Bosch 2-24 perforators are found, which have a blue housing. As a rule, these are perforators produced in Europe. They most often become the subject of fake. The fake is immediately visible incorrectly applied inscription. Instead of the lettering Bosch 2-24, a set of letters and numbers passed on the fake, at the first glance resembling the original inscription.

Well, the last. On the Bosch Perforator, the factory production of the inscriptions is applied with casting or extrusion. For fake punch Bosch inscriptions are pasted on self-taking.

These are the main characteristics of fakes determined by the appearance of the power tools.

How to avoid fakes

In order not to get caught in a fake, you need to adhere to several recommendations:
Do not buy power tools from hand, in online stores, in the markets;
Non-low price, a high-quality tool cannot cost cheap;
Buy only in specialized stores of power tools with the design of all warranty documents

Do not be trusting, do not give in to simple tricks, do not chase for cheapness.

Most of the manufacturers of the power tools label their products systemically and one name can be understood most of the technical characteristics. And if the Japanese, Chinese and other manufacturers in models can be confused, the Bosch tool marking is in German and transparent.

Nevertheless, Linek products of Bosch have so much that it is not a sin to make a crib.

Tool color

The Germans among the first introduced a public division into a professional and home tool. Earlier, and now, most manufacturers allocate a home tool into a separate brand or allocate some ruler with less reliability and power.

Regarding the power tool Bosh separation in the design was the benchmark - and more often you can hear "green" instead of "home" and "blue" instead of professional, and not only of this manufacturer. Actually, with color designation and labeling features begin. Them, by the way, more than two:

• P. - a home or personal tool, from German Persönlich, is moving under the thesis DIY - Do it Yourself, household crafts;
• G. - commercial or professional, from the German Großtechnisch, "on an industrial scale";
• A. - garden accessories (including chainsaws), by the way, also stands out by the color of the plastic of the case - light green;
• B. and D. - Measuring Accessories and Accessories.

Bosch Tool Type Table

Universal Structure of the Tool Brand:

1. Tool level (1 symbol);
2. Tool type (2-3, less often 1 symbol);
3. Two digits through dash, denoting key features, depending on the type;
4. A set of additional properties, 1 letter to the property.

Table with Tool Tools Bloc Marking II:

Symbols	Type of tool	Key features with example
_As.	Building vacuum cleaner	25 - Tank volume in liters
_Bh.	Perforator	2−26 26 - Diameter of drilling (maximum)
_Bm.	Drill unast	6 - Maximum drilling diameter in brick
_Bs.	Ribbon grinder	75 - Width of the used ribbon in mm
_Da.	Grinder (Delta)	280 - Power in watts
_Db.	Drill (installation) under diamond drilling	2500 - Power in watts
_EX.	Shlifmashinka Eccentric	125 - grinding diameter 125-150 - machine is suitable for two diameters
_Gs.	Grinding machine (engraving)	8 - Maximum revolutions 8000 / min
_HG	Technical hairdryer	660 - Maximum temperature of blowing air in degrees Celsius
_Ho.	Electrolabanok.	15−82 15 - Maximum planing depth 1.5 mm 82 - Barabana Width (Processing)
_Kf.	Edge milling	600 - Power in watts
_KP.	Pistol Adhesive	200 - Rod Length
_Ks.	Circular Saw	190 - saw blade size
_MF.	Multifunctional tool (or mill)	190 - Power in watts
_Na	Conditional electronics	3.5 - weight in kilograms, power proportional
_OF.	Universal milling	1600 - Power in watts
_PO	Machine for polishing	14 - Power 1400 watts
_SA.	Sabelnaya Pila	1100 - Power in watts
_SB	Hammer drill	10.8 -Boltage Similar to screwdrivers, for battery models 16 or 1600 - the maximum drilling diameter in the brick (goes into the power of about 1 to 0.5)
_SC	Cutting electronics	2.8 - weight in kilograms, power proportional
_Sh.	Bark	16−28 28 - Size of the landing hexagon
_SM.	Sharpened	200 - the maximum size of the sharpening circle in mm
_Sr.	Drill-screwdriver rechargeable	1440−2 1440 - battery voltage 14.4, which correlates with power. 2 - the number of batteries included For home "2" goes to the "2-Li" block, which describes the batteries. 1440 and 14.4 are different models, without a comma, a "simplified" GSR lineup, in fact - DIY.
_SS.	Shlifmashinka vibration	180 - weight 1.8 kg, comparable with power
_ST.	Electropolitanzik	850 - Maximum depth of cut in a tree 85 mm
_Ws.	Corner grinder (Bulgarian)	17−125 17 - Power (1700 watts) 125 - Circle diameter (125 mm) With a single digit - only power.

Measuring instruments:

Additional label

After basic digital parameters, a number of letters go, which sometimes affect the cost and functionality of the tool. We give the designation with a common list.

Functions

Actually, combinations of letters after the master's leading definition:

• A - a system of dusting (jigsaws, grinders and others);
• B - a bougie handle, Simply put - "Clap". Usually on jigsaws, milling and other wood processing tools
• C - stabilization of revolutions under load;
• D - blocking rotation;
• E - electronic adjustment of the rotational speed;
• F - replaceable cartridge included;
• H - additional straight handle;
• I - launching current limit, protection against accidental inclusion or anti-cancering KIKCKBBACK STOP;
• J - launching current limitation;
• L - increased endurance or power;
• P - pendulum move;
• R - reverse or rotation direction switch;
• S - set of snaps in the kit;
• T - torque adjustment;
• V - protection against vibration;
• X - Automatic stop (braking) circle.

Batteries

Separately, it is worth highlight a large amount of Bosch battery tool. In this case, the marking is not an objective value of the power or dimensions, but the voltage of the battery used. Thus, the ruler is formed 10.8, 14.4, 18 - from simple DIY (but still blue) to industrial.

Separately indicates the type of batteries and their number in the set. The most frequent combination - 2-Li - two lithium-ion batteries in the kit.

Examples decryption

Popular now Multifunctional tool Bosch PMF 250 CES (or SCE):

And a small screwdriver, which is often chosen for life - Bosch PSR 1440 Li-2:

Conclusion

The rules are constantly changing and updated, and marketing requires more vivid names - the lineups 1440 appeared in addition to 14.4, and the MF code moved from the milling mills to multifunctional tools. Nevertheless, knowing the encoding, it will be much easier to communicate with managers in stores and not miss the conformity of the configuration by your tasks when selecting the Internet.