How to collect bed wardrobe. Step-by-step recommendations for making a wardrobe-bed with their own hands. Preparation of elements for design

The room is too close and does not have the desired amount of free space, but all furniture in the room is necessary? If you do not have the opportunity to expand the living area of \u200b\u200byour apartment, except for moving to a more spacious, modern accommodation, do not be upset, because there is a lot of wonderful ideasto do Your small home is more comfortable for accommodation!

Folded bed - a prerequisite for small-sized apartments, when you need to accommodate everything, but at the same time not to upgrade the space.

Successful furniture disguise makes a cumbersome aesthetic structure suitable for any room.

What takes a lot of space in the room? Most people will answer that this is a sofa or old sofa. If in your case it is this way, then reading our article, you not only learn to save space by setting yourself into the roomotkydn be the bed, but also learn howto do Her hands.

Vertical orientation is the most economical option for a used bed placement.

An additional advantage in favor of creating a new bedroom will be delivered from the old ones that have long been out of fashion sofas. At the same time, a new, modern, comfortable folding bed will soon be the subject of your pride, because you will gladly show your creation to friends who came to visit!

In this performance, the furniture can be of any size: single, double, non-standard.

Folded bed in the assembled state looks like an ordinary compactcupboard for clothes that occupy the minimum number of space in your small-sized apartment, but thanks to the otkidn. oMA mechanism, sleeping space is easily folded, turning into the most real period. Yes Yes exactly! The level of sleep comfort on folding bed can be equated precisely to the convenience of relaxation on a luxurious soft feather!

The furniture niches serves as a penalty, a wardrobe with swing doors or a wardrobe.

The cabinet bed can be an independent unit of furniture, but most often enters whole furniture set.

So, now, when there was no doubt about the need for this thing in my apartment, you can proceed to the manufacture and assembly, but first you need to decide on the design, as well as the external design of the folding bed.

In the folded position, such a bed takes a minimum of space and does not harm the spine during sleep.

It can be vertical or horizontal, but it is worth considering that horizontal options are usually intended for children and adolescents, representing small single-sided places that turn into a shelf or dresser, while vertical designs can be any dimensions.

The chest of drawers can be used in the children's room or put under the wall in the living room as the "spare time" in case of arrival of guests.

Simple operation allows the design in a room for children.

First, it is necessary to create a drawing of the future product, which will help much faster to navigate in the assembly process, receiving the desired result. The engineer skills will not need, it is enough to prepare a simple schematic drawing of the future bedroom, specifying the size and configuration of the structure on it.

Drawing of a wardrobe.

The next important step is the choice and purchase of the necessary materials and tools. The most qualitative structure will be from the chipboard panels, therefore we advise you to use them as the main material. The chipboard should be purchased in specialized shopping centers, since the durability of your future bed will depend on the quality of the source material.

Bed base is better to do orthopedic.

We will also need:

• D REL;
• W Variety;
• E. lETTRIC Lobzik;
• P flesh;
• M. fuzzy screws;
• From amorus;
• About a TKID mechanism.

Tools can always be purchased in profile stores or order on the Internet.

So, you prudently acquired the necessary materials, tools, prepared the drawing, were determined with the size of the future furniture subject. When everything you need already prepared, we begin to make furniture with your own hands. The assembly process was conditionally divided into 4 steps.

• Step one. It is necessary to collect the frameworkcupboard a, hiding a compact sleeping place. Such a box consists of several parts: plinth, rear wallcupboard a, as well as shelves for the stop. All items are attached to each other with self-draws or screws, located approximately 25 centimeters from each other. Assembledcupboard It is necessary to install only on the smooth floor.
  

  

  Cabinet frame assembly.

  

  Fastening the top panel.

• Step second. We establish the collected design, which will serve as a reliable support for the folding part of the furniture and freamed it to the wall.
  

  

  The "skeleton" of the cabinet is ready.

  

  Krepim "Skeleton" to the capital wall of the apartment.

• Step Three. Now we collect the foundation. It is a frame from the boards, the height of which corresponds to the size of the future mattress. At the same time, the foundation must be perfect to approach the frame of the already collected by us.cupboard but.
  

  

  On the Frame Fresh Lamel.

  

  Thus, we obtain the design where the mattress will be placed in the future.

• Step fourth. Now that all the main parts of the structure are collected, connect the base with the box, fixing the part with the help of self-tapping screws. Then Krepimotkydn oh mechanism in accordance with the applied instructions.
  

  

  Montage of bed frame using a bed lifting mechanism and gas springs.

  

  An important bed knot is the biggest loads in this place.

  

  It is better not to experiment at this stage and acquire a folding mechanism of the factory assembly.

  Thus, it will be possible to avoid unnecessary difficulties at the finishing stage of work, saving time significantly. At the final stage, we simply connect the housing with other elements, after which it remains to clean the ones the outside of the box so that it is more likecupboard , as well as paint the construction to your liking.

  

  After you have connected the folding mechanism with a frame for a mattress, you can safely use such a bed.

  

  Install the facade in the form of an improvised door of the cabinet. Behind the handle bed will be translated into a horizontal position.

For a more aesthetic appearance of the finished design, all the product must be covered with varnish to protect wood from dampness and rotting if the chipboard panels were not originally processed.

The price of high-quality German and Italian lifting mechanisms are quite high, but safety is worth it.

Install the mattress and compact sleeping place ready! Now you can enjoy new comfortable furniture and, of course, a lot of free space in the room, which would seem to have nowhere to take!

In the catalogs of furniture accessories, it is written on which orientation of the bedroom, dimensions and weight is calculated by the lifting mechanism.

Video: Wardrobe bed do it yourself.

Transformable sleeve models are suitable for small rooms. Ergonomic products, compact, stylish and combine several functional items. In the afternoon, the transformer acts as a table or working area, and in the evening it becomes a high-quality place to relax. Furniture produced various dimensions, shapes, sizes, price categories. If necessary, you can make a bed transformer with your own hands.

Similar articles:

Types of beds

Transformable products are varying by embodiments of structures and the number of furniture items combined into the product. There are models connecting a bed and a wardrobe, an area of \u200b\u200brecreation and a working area, a bed and a spacious sofa, etc. Developed embedded structures, folding and folding.

The bed, combined with the cabinet, the lifting mechanism is pressed against the wall and performs the function of the shelving. The product is practical and used in small-sized apartments.

Wardrobe bed combined with a sofa. Such a furniture model is optimal for the living rooms, since it is upgraded into the area for recreation. In the disassembled state, the sofa is an additional support of the bed that increases the bearing capacity.

Beds combined with the working area are used in the design of children's rooms, since the furniture is supplied with drawers, shelves and comfortable lies. The design add sockets and backlight for efficient operation of space.

The sofa bed can be standard or transformed into a bunk design equipped with a spacious compartment for sleeping facilities. The built-in double-bed transformer bed can be combined with the table. The model is used in the design of teenage and children's spaces.

Original and ergonomic design designs. Sleeping space in such models is hidden on the other side of the cabinet. The furniture is equipped with a rotary mechanism that allows you to move the module.

Designed and gained popularity model bed of original transformation, which allows you to lift a sleeping bed, put on and mask it at the ceiling. The design helps to free the large area of \u200b\u200bthe room and becomes invisible during the daytime.

Transformable furniture is multifunctional due to embedded Tumb, antlesole, shelves, etc. Additional features are selected depending on the interior design and residents' requests.

Constructions are divided into transformers with a horizontal or vertical mechanism. The choice of system affects the dimensions and style of room design. Products rising vertically, most often acquired and functional. Horizontal transformers will fit narrow rooms with low ceilings.

Tools and materials

Before creating a transformer for a small apartment or premises with a larger area, it is recommended to purchase workers and tools. For designs, wood plates are needed: furniture shields, chipboard, pls, etc. Materials are purchased after drafting, the indicator add 10%.

The furniture shield is made by pressing boards, bars without adding synthetic compositions. The material is environmentally friendly, durable, easy to work, but has a high price. More budget and affordable - chipboard (chipboard, LDSP). Boards produce various colors, thickness and density. The strength rate among the composition is less than that of furniture shields. The preferred thickness is about 20 mm.

In the manufacture of a bed-transformer, you will need a set of special tools: drill, screwdriver, electrolovik, perforator, grinding machine, centimeter roulette, construction level, square. There are also pliers, a file, a knife, a set of screwdrivers and so on.

For the design, accessories will be required: a folding mechanism, configmatics, screws and screws of different sizes, furniture corners - standard and reinforced, anchor fasteners, handles, facade decoration elements.

Wardrobe bed do it yourself

Simple and available for self-execution Model combining wardrobe and sleeping bed. The product consists of 3 parts that are created separately and then combined into the design folded. Before making a transforming bed with their own hands, it is necessary to perform the calculations of the size of the model and make a drawing with placed places for fasteners. You can use ready-made schemes or make a plan on your own, designing each item.

The dimensions and shape of the base body for the bed depend on the required functional and the size of the room. An important part of the transformer is a spacious niche under sleeping place. With independent making frame of the cabinet bed, the plates are often chosen (laminated or standard), since the material is unpretentious in processing, is available at cost. You can order the DPE details on the desired parameters from the manufacturer, in which case the edges of the edges of the elements of the edge ribbon will be processed.

MDF plates or chipboard are fixed at the bottom of the base, in the assembled form they serve as a facade of furniture. When designing elements, the interior design is taken into account. Rack and sleeping space combines lifting device. The mechanism transfers heavy loads, so experts advise you to choose high-quality systems. In the manufacture of a wardrobe bed, attention should be paid to the dimensional characteristics of the mattress, the presence of accessories.

Making frame frame

The transforming frame must hide a compact leisure place, so it is performed according to the calculated size and configuration. The design should provide access to a spacious niche for a sleeping bed. When calculating it is important to consider the parameters of the mattress so that the depth of the box coincides with the bed thick. Experts recommend adding 2-3 cm to the desired size.

The material serve simple in the processing of the chipboard plate. Cutting parts are performed from manufacturers to avoid the formation of chips. You can order from specialists and ready to frame that it will simplify installation work, but it will be more expensive than self-fulfillment of the design.

As part of the box, several elements: plinth, the back wall of the cabinet, shelves for the stop. There are typical standards of the dimensional series, but you can perform an individual project - according to the author's design. In this case, accurate independent calculations will be required.

For the framework of the frame, 2 boards are needed, which become supporting in the design. The size of the beams is about 2 m. From above, at the bottom and on the edges of the beams are fixed on the tapping screw and glue. Reliability add transverse boards. Over the finished frame is performed, the materials are fixed with adhesive compositions. The fasteners are performed using self-tapping screws or screws that are placed at a distance of 25 cm. The assembly work is carried out on a flat surface.

Production of folding bed

The next stage is the installation of the folding part of the sleeping bed. The basis protrudes plywood, painted to the required dimensions. To avoid deflection and damage after installation, it is recommended to use 4 boards and add transverse plates. Strengthen sleeping beds extra boards. Additional elements should not prevent the functioning of the lifting system.

When performing a folding unit, competent calculations are needed to avoid box overload. The movable part must facilitate the design. The bed lifting mechanism can be represented by garage veins, solid axes or pin with bearings.

It is important to ensure the lift frame with the mattress and fixing the design vertically without physical effort. This requires spring blocks or counterweight. The lifting mechanism for the transformer bed is not necessary, the systems can be purchased ready.

What do you do with old furniture?

It originated for no accident, as I have a 2-bedroom apartment, and sometimes there is not enough space in it, and then this double bed is still worth it, which takes the half. And with a wardrobe, it would be much more convenient, the day is a neat cabinet, and at night a full bed. Since there was no money to buy a wardrobe-bed, I decided to try to make it myself, however, I first had to draw drawings, to measure sizes, and after the family council, everything was already decided and approved, we ordered the necessary details for the future bed.

The construction process started.

We decided to make the basis of the bed from our bed at that time, and they took a mattress and orthopedic base with a size of 180 × 200 cm.

We unscrew the lamellas from the base, the lamellas are such a little curved plywood stripes.

Since the furniture legs are unlikely to be able to withstand the weight of the future wardrobe, I decided to install it on two 40 × 50 mm bruques.

After that we combine the base with the side walls.

And of course we attach the top panel.

Here, in general, the base for the cabinet is ready.

Fresh the resulting base to the pre-selected wall.

I think you should not explain what it is and why he is needed. Since all work was carried out in the apartment, and there were a lot of chips, it was decided to vacuine after each drilled hole.

The next step is the installation of a bed frame using gas springs and the lave room mechanism

The biggest loads are in this place, so be careful.

That's it looks like everything when connected.

And from another angle.

Now enhance the base.

We screw the lamella, and we have such a result.

We attach the improvised doors by pulling the handles of which the bed will be translated into the horizontal.

For convenience, we attach lateral lockers, they will store bedding. Who wants, maybe the cabinet in the cornice, which is a leg of the bed, attach the lamps.

And this is the final finished option of the wardrobe bed.

What, I hope, because I applied all measures to ensure a quiet and strong sleep!

The bed with the lifting mechanism is the best option for small-sized apartments, which allows you to solve several problems associated with the improvement of the room at once. Practicality, reliability and multifunctionality are its main advantages. It can act not only in the role of a bedside place, but also to perform the functions of the chest, for storing different things and accessories. Making a bed with a lifting mechanism is not so difficult, as it may seem at first glance. When fulfilling all the requirements, recommendations of specialists, the bed will not be worse than the factory. In order to figure out how to do this, it is necessary to divide the whole process into several stages, each of which requires special attention.

Features of such models

Beds with lifting device have a number of features that need to be considered when making it with their own hands:

• bed dimensions that mainly affect the strength of the lifting device. The greater the bed, the greater the weight will go to the mechanism. According to standards, the size of the bed is 2 meters in length, the width of one-room space is 0.9 m, double - 2 m;
• beds with a lifting device can be one and double;
• the mounting of the mechanism can be horizontal or vertical;
• bed height affects box capacity. If the product is planned to do on legs, the box will be much smaller than that of the bed without them. The product without legs have another important plus, this is the lack of dust under it;
• assembling the product with your own hands requires a consistent, responsible implementation of all its stages, these are drawings, preparation of materials, the manufacture of individual parts of the bed, their assembly. On average, 1-2 months will leave for the production of bed, subject to the simultaneous execution of other daily duties;
• the choice of material should be made not only from personal preferences, but also depending on the design of the room in which the product is planned.

Bed with steel frame frame frame frame with lifting mechanism Bed design circuit with lifting mechanism
Bed assembly scheme

Materials and tools

Any building process or the manufacture of furniture with your own hands begins with drawing, as well as the preparation of the necessary tools and materials. The choice of material begins with the base of the box. The most common and inexpensive material for the manufacture of any furniture are chipboard sheets. But other materials such as OSP, chipboard and others can also be used, it all depends on the preferences of the owner, financial capabilities. Next, the upholstery material is prepared, the choice of which occurs solely from personal preferences and design of the room.

Bed filling, consists of foam rubber, sheat fabric. Their size and thickness is prepared according to the drawing composed.

The most affordable and inexpensive material for the manufacture of bed is chipboard

To process material and prepare it to assemble work, you will need this tool:

• level;
• roulette;
• pencil or marker;
• electrolovik;
• screwdriver with different nozzles;
• bulgarian with a disc on metal;
• welding machine;
• construction hairdryer;
• steel strips;
• furniture stapler.

Orthopedic base
Materials for the base
Lift Transformation System

What to choose a lifting mechanism

The design of modern beds allows you to use them in different rooms, while having a suitable lifting mechanism, thanks to which a sleeping place can be folded both horizontally and vertically. In addition, lifting beds are classified according to the type of the built-in lift. It depends on simplicity and ease of use of furniture. The lifting mechanism is divided into 3 types:

• with manual lifting;
• spring;
• on gas shock absorbers.

Gazlift spring hand

The mechanism with manual lifting is the most affordable device, because it does not contain additional devices in the form of shock absorbers or springs. Beds with such a mechanism are mainly used for adults, since when opening a box, it is necessary to make considerable efforts, children can not be able to cope with such a load. But, besides flaws, the manual mechanism has advantages - strength, durability.

The spring mechanism is convenient to use, but the period of its operation is from 3 years to 5, after which it will be necessary to fully change it. The main reason for breakdown, is wear, springs stretching. A large plus of the spring mechanism is its price, it is relatively small, so that it is very in demand and is in demand.

A gas shock absorber is the most convenient, reliable, durable mechanism. The device works smoothly, silently almost without human intervention. The service life of such a mechanism is from 5 years to 10, with its constant use. The selection of the shock absorber is carried out depending on the dimensions of the product, the weight of the sleeping frame. The mechanism on gas shock absorbers is expensive, but at the same time in demand.

In the manufacture of the bed with your own hands, the lifting device can be bought in furniture stores or on the Internet. You can make with your own hands from suitable materials. But when choosing materials, it is necessary to take into account the fact that the load from the mattress lies not only on shock absorbers and strips of the mechanism, and at the places of fixtures with fastening fitting.

Fastening the mechanism occurs in this order:

• initially, the upper device is installed, to the base part of the box, the lathes of the bedroom plane;
• it is made of iron corner rolled strap for its complete consolidation;
• the assembly of the two subsequent slats will allow you to control the height of the lifting of the lattice with the mattress;
• the mounting of the lower support bar is made to the main box, it is necessary to facilitate the slip of the hinge supports;
• after completing the installation of the mechanism, you need to check all its fasteners.

Gazlift is attached to the rush base
Gas shock absorber mechanism
Installation of gas shock absorbers

Making lifting frames

Assembling lifting frame with your own hands consists of two main stages, these are carpentry work and processing process.

Carpentry work:

• the assembly begins with the preparation of parts for the frame, according to the drawing, in which all sizes are indicated;
• next, the framework of the frame of the frame, this is a box of calibrated boards. The process must be carried out on the floor, to eliminate the distortion. To align the corners, it is necessary to use a building a square;
• the design of the structure is performed using metal corners, and for the strength of the place of the joints is sampled with a joinery glue. During the attachment, you need to pay attention to the hats of the screws, they must drown in the wood, but not much. The appears of the spins are recommended to immediately process from burrs;
• in the case of large beds, it is recommended to make a central partition along the frame;
• the next step is the fastening of the rails that are screwed using the samples from the inside of the sidewall, aligning them along the lower edge of the box. They need to attach lamellas on them. The size of the regches should be within 20 by 80 mm;
• the same rails act as a lamellae, only the length of them will correspond to the width of the bed. The fastening of them is made on the support rails along the frame, with a step of no more than 15 cm. For lamellae and plywood is suitable, but in this case the installation of the central partition is required;
• this carcass is finished on this carcass ready.

Framework:

• this process involves the extraction of wooden parts with a skin or a special sandpaper and a lacquer coating;
• one of the nuances of the frame preparation is a plywood sheet, which lies on the lamella to the uniform load distribution. Or you can make laying lamellas with a step of step 8-10 cm.

Assembly of the carcass
Beds Beds are fastened with the help of corners and screws
Ready frame bed

Making the main carcass

Build the frame, like all other components of the bed elements, is produced in stages. First of all, its components are prepared for the manufacture of the main framework. Design, height, size of the back, the presence of legs All these nuances are reflected in a predetermined drawing. The main requirement for the manufacture of the product is the reliability, strength and quality of the material.

As mentioned above, the material can be used any, depending on the financial capabilities and personal preferences. For the box of a double standard bed (2000x1800), it will be necessary: \u200b\u200bfor lateral parts - two boards with long-length 207 cm, for the end elements you need two boards with a length of 182 cm. The assembly of them is made according to the same principle as the lifting frame, with the help of self-samples, corners and glue . In the assembly process, this moment is the most responsible, so before mounting the corners you need to check that all angles correspond to 90 degrees. Excess the adopted glue must be immediately removed, so that in the future it did not give it difficulty when processing the frame.

In the manufacture of large beds with your own hands, in the main box, you need to install rigidity edge, through the longitudinal axis of the product. In the case when the design of the bed provides legs, then the last step in the installation process is to install them. The most simple version of their manufacture, is the assembly of two bars (40x50) with the installation of them to the depth of two crowns of the bar. To enhance the design, you can also install the leg. After putting the design to its original position, you can proceed to its processing, clean and cover with varnish.

Fastening Reluks for Plywood Dna
Feet for bed
The legs are attached inside the frame
Outdoor
In order not to scratch the floor on the ends of the legs, the pieces of linoleum can be glued

Testing products

The final stage in the manufacture of beds with a lifting device, it is its design design, trim. Depending on the design of the premises, the personal preferences of the owner, as well as banal financial capabilities, the trim can be made using:

• fabrics;
• skin;
• dermantine.

If the product was performed from high-quality wood, it is possible to process with paints.

For the trim process, it will be necessary:

• fabric (or other selected materials);
• construction stapler;
• sheet foam.

The casing is made of the main frame and backrest. To create a small volume and airiness upholstery, between wood and cloth is made with a leaf foam rubber. The construction stapler is quite enough for fastening the tissue, its metal brackets, thanks to the spring mechanism, are quite strongly driven into the wood, and we hold tightly.

The legs are turned around upholstery
Finish installation of legs
Beds Beds are covered with foam rubber
From above, the foam rubber is nailed with nasky about 3-4 mm
Upholstery leather
So the board was separated around the leg
Bottom leatherette got sick with nasup
Upholstery corners are fixed

Making the headboard

The headboard for the bed can be performed from the same material as all the product or use a regular plywood sheet. On the plywood or other material it is necessary to produce the necessary measurements and cut with an electrolovka that the form of the back that is most like. But you need to keep in mind that during the trim process it is easier to work with rectangular forms.

Harvesting headlock
A wooden border is attached to the workpiece

The head of the head of the head of the same principle is the main framework, with the help of a construction stapler, a casing material and foam rubber sheets. With the difference that the casing should be more air for the headboard, therefore two foam rubber sheets are laid between plywood and material. Depending on the design of the bed, with the help of foam rubber and different types of material, you can give a unique kind of headboard.

Fastening of foam rubber
Second layer of foam rubber Finish dense Vatina
Stretch the fabric Finished headboard

Summing up, we can say that thinking how to assemble a bed with a lifting mechanism, you should not be afraid of difficulties, because it can be done with your own hands. The main condition for obtaining a good result is the sequential execution of all installation steps, the first of which is drawing up the drawing, where all sizes are indicated, the amount of material required tools. In compliance with all geometric proportions, the bed will be much better and more reliable than the purchase option. The material for its manufacture is chosen depending on personal preferences, financial capabilities and design design.

Despite the large selection of finished furniture, many people spend a lot of time and forces in search of a suitable closet or bed. Through the "sieve doubt", a variety of models, differing from each other with a constructive, color and sizes, but nothing is suitable. It is with such a problem that the user has encountered the user of our site with Nick avamonster,and the homemade bed became an excellent way out of the "furniture deadlock." In this article we make a bed along with our user!

Overview of lifting bed models.
- What instruments and materials are needed to make a bed.
- Operating procedure.

Bed "Make yourself"

avamonster. User forumhouse.

I need a transforming bed into my house, which can be quickly and easily removed into the wardrobe. As folded form, the facial part of this bed should be completely identical to the "facade" of the ordinary cabinet. Therefore, outside there should be no discovering handles sticking legs, etc. Such a bed should not take a lot of space. In the unfolded form, the Transformer should turn into a full-featured bed intended for a comfortable sleep, and not a guest "bed".

Wheeling the Internet, revising dozens and sketches of beds and throwing several furniture stores, the forumchanin could not find a model that would fully satisfy his needs. Namely:

• We need a transformer under the standard size of the mattress of 1600x2000x150 mm, like a normal sofa; the height of the decomposed bed should not exceed 45-55 cm;
• The width of the transformer bed is: the width of the mattress (1600 mm) plus the thickness of the side walls of the cabinet made from the chipboard. Those., Approximately 1632 mm. The depth of the bed is equal to the depth of the cabinet - 450 mm. In the unfolded state, the bed length should not exceed 2100-2200 mm;
• In the open position, the folding bed should fit well into the interior of the apartment, and not look like the simplest analog of "clamshells". Should easily and quickly clean;
• The unfolded bed should not occupy a lot of space in the house and impede the free movement of the room, opening adjacent cabinets, lockers, drawers, etc.;
• Safety: the bed should not have sharp corners, about which you can hit the foot, hidden cavities and cracks where pets or small children can climb. Gazlift or springs of the opening mechanism should not be located near the sleeping head;
• "Humanny" price tag.

We present a selection of photos of those folding beds, which reviewed the forumchanin, and also give it comments, why it did not come up with a one or another model.

A quick glance at this picture is enough to understand that this is not a simple cabinet, but a wardrobe in which it managed to embed a "clamshell". It would be better not to be built - the gap is visible from below, and the handles are very uncomfortable.

This lifting model in the folded condition is no different from the ordinary cabinet, but it is worth unfastening it, and the bed covers access to the cabinets and drawers. So she must constantly clean and go down, which is very uncomfortable.

The option of the bed-cabinet with sliding doors. This model and place does not occupy a lot, and in the folded state is indistinguishable from the standard cabinet. The main inconvenience is the breaking depth of the Transformer - 80 cm. To sleep will have to sleep, almost lying head and shoulders in the closet. It will not like it to everyone. So this "guest" option also disappeared.

Typical model that can be often seen in stores. Avamonster - and she did not suit that, instead of a springs or a gas lift, the bed was removed using a counterweight. When it leans, it can be seen that the bottoms are similar to the legs from the "clamshells". And the price exceeds 40 thousand rubles.

Another common option. The main claims of AVAMONSTER-A to this folding bed: from above, like the "mustache", stick the legs, and in the open form, the mattress lies inside the bed frame. Passing next to such a bed, you can accidentally touch the foot about its sharp angle. The block with springs is hanging next to his head, and on the "tram" handles can be immediately determined that this is not an ordinary cabinet, but "transformer".

avamonster. User forumhouse.

All models that I have seen in the store had a constructive: "The box, shot down from chipboard or plywood, which is simply attached to the mattress." It did not suit me. I was brought to the United States, there I saw another constructive: the frame is "inside" the base under the mattress, and the mattress itself is a little more widely foundation. Springs or gas lift are under the mattress, and not stick out opposite the face. It seems to me that this option is safer and convenient to operate.

There is also an option with a triple-caterpillar, but such "transformers" of the road and do not often come across on the eyes.

The search for the finished folding bedroom was not crowned with success, but the negative result is also the result. As a result of His Nataris, Avamonster finally decided on the list of requirements for the product and therefore decided to collect the bed itself.

Interesting is still this option "two in one", but this project "Make your own two bed bed" is much more difficult for realization at home.

Material required for assembling bed-transformer

Looking forward, let's say that the forumchanin managed to collect a double bed, no different and even superior industrial or custom-made samples. The width of the "transformer" is 1640 mm, the length in the decomposed state is 2130 mm, the height is 500 mm.

According to Avamonster, to achieve the success of the project and do everything as needed by the first time, without numerous alterations and changes, Sketchup helped him. Having spent on learning the program with "0" three months, sitting on drawings and sizes, the forumchanic sketched the virtual models of the crib and the diagrams of its nodes that can be twisted on the monitor screen (see pictures).

A similar approach made it possible to avoid multiple errors. After all, many novice masters often forget the main construction saying: "Some seven times, one time a down." An attempt to immediately embody "in metal", without plans, drawings and competent calculation of several options, leads to a damage of the material due to the constant changes in the design of the product.

Bed "DIY" is made from simple materials and does not require special tools for its manufacture.

What is needed for the manufacture of the product

• Chipboard sheets - 1580x995x16 mm. I saw into the size, and the edges of the ends of the slabs was made on the side. It took 12 thousand rubles;

• Made to order springs for the lifting mechanism. Those. Spring parameters: bar diameter - 4 mm, outer diameter - 36 mm, number of turns - 30. The length of the spring with hooks is 18 cm. The course of stretching is 21 cm. The accompanying force -55 kg. Spring parameters that depend on the "shoulder" of the lever and the total weight of the bed, the forumchanin calculated in a special calculator. A set of 5 parts bypass Avamonster at 3.5 thousand rubles;

• The framework of the bed "Make myself" is a profile tube with dimensions of 4x2 cm. The wall thickness of the frame tube is 2 mm. A total of 18 meters of such a pipe were purchased. The pipe was painted in size on the elements on the spot so that it was possible to take it to the house on the usual "car". It took another 1.5 thousand rubles;

avamonster.

Because I have no welding machine, I had to drill holes in the pipes under the fastening bolts. This greatly complicated the task of assembling a bed-cabinet. The best option is to cook everything yourself or pay to the order to order, and so I also had to clean pipes from rust. The surface of all visible metal parts of the pipes, I saved the film under the wood.

• Hardware. The bed "Make himself" was going to bolts, nuts and screws. The plane frame for strength and rigidity was twisted towards the corners under the M6 \u200b\u200bbolts. All bolted compounds also calculated the load on the slice. Forumchanin's essential fasteners have spent 4 thousand rubles.

How to collect a transforming bed yourself: the main stages

The base under the mattress (sheets of chipboard) was screwed to the homemade frame with special leakage self-drawers. Such self-tapping screws have at the end of the "drill": chipboard should be held in a large diameter, steel is smaller, and already on the finish line in the tree is a deepening under the head of the self-press. Thus, in one reception, the chipboard is attracted to a metal frame without its pre-severity.

The design of the frame is designed so that the soft mattress is the widest part of the crib. In this case, it is impossible to hit the foot on the solid protruding edge of the frame.