Tracks on the private home. Features of the drawing tracks in the country. Wood in a variety of species

Elegant track pop-up among snow-white pebbles

Today we offer to your attention stunning ideas for designing garden tracks. We will demonstrate you the magnificence of options for arrangement and luxury landscape design. You have all the most popular examples, from unique design compositions and stylish geometry, to simple and uncomplicated paths built from building materials and other magnificent ideas.

Most popular amazing alleys and paths, built of natural stone. They themselves can perfectly complement the textures and diversify the juicy greens, but you can show the creative droplet and create great masterpieces with your original plot, charm the contours and rough forms.

Fabulous path among the riot of decorative plantations

Rectangular fragments of rocks surrounded by multi-colored pebbles

Simple but neat path

Stone plates laid out between beautiful flower beds

Even simplicity can effectively look

From large debris, you can combine not only the alley, but also the steps

Composite contrasts

What your fantasy is capable

Beautiful staircase

Unique image

Cozy garden

Laconic landscape design

Fabulous composition

More effectively look in the landscaped design of a piece of artwork from a decorative stone, which has previously fed to the acquisition of a certain form.

As a rule, such fragments of rocks are manufactured under the order and, depending on your desire, they may even have the most intricate configurations.

You also get the opportunity to individually choose one or another stone and better exercise such an idea along with the designer who will help you correctly formulate your needs.

Elegant decoration

Intriguing compositions from different materials

Winding trap

Alley for modern garden with minimalistic design

Original scenery

Road to fairy tale

You can focus on non-standard embodiments, the winding tracks from the stone will add your site of an interesting raisin. And if you choose the original lighting for the garden to choose an original image, you will get an impeccable picture from which it is difficult to take your eyes. Share this path you can almost from any material that is available to you.

Charming Road Through Well-kept Lawn

Appearable concrete trail surrounded by multi-colored flower beds

Modest design

Someone brick may seem not quite relevant material, but if you correctly formulate an image, choose non-standard patterns, then you will get a wonderful decor. Moreover, you can combine it with other textures, which would be a catchy contrast.

Wonderful motif

Stylish alley

Convenient way through a luxurious gallery

Simple but spectacular solutions

Stylish Lampboard

Road along which your walk will be unforgettable

An interesting way of masonry

Chic landscape design

For fans of stylish geometry and creative design, you can think about a stunning version that is worthy of royal flower. Symphony of natural stone, lawn grass, pebbles or other material can be embodied in a chic picture that will become a skillful highlight of your garden.

Playful combination

Decent ornament

Concrete garden tracks also have a good potential. You can build such an alley as independently, having initial knowledge in this industry, or entrust all the work by a specialist.

You can choose any method: a solid fill or stove, and the second method will be more flexible as you receive not just a solid canvas, but also areas where the decorative plants can be planted between fragments that will serve as framing for each piece.

Alley between beautiful flower beds

Impressive composition in the original frame

Asphalted tracks

Adding interest with exciting parts

Magnificent steps

Want to express your personality, and in some cases will meet in a modest budget? Then the following examples will pleasantly surprise you.

Unusual, but beautiful wooden deck walked in the ground

Creative approach to the arrangement of the path

Even simple pallets will perform the simplest task.

Unique pattern, the material for which can be found among our garbage

Passing between flowerbamia

Having a small pond on its plot, you don't even imagine how it is possible to submit this image. Right in the middle of the mini-reservoir in the garden you can build a flowerbed with moisture-loving plants and make a small path from the stones. But this should not be limited, because there are ample opportunities that you should not hide.

Gorgeous man-made lake

Exotic terrace

Luxury landscape design

The paths laid out by stones with an uneven structure have a very charming look. They are perfectly combined with all landscape. What would be slightly soften their rude appearance, you can plant decorative low-growing plants in voids between them, which will be tailored to open soil and form just a fabulous image.

Taming version for making track

Modern design terrace

Wonderful path

Magic road

Make a variety of paints

Visual attractiveness of each detail

Magnificent landscape with excellent decorations

It is possible to build garden tracks with your own hands, you can even doubt, but glass, sand, brick debris, old tires and other building materials can become a brilliant idea for the scenery of a stunning path, running through your garden.

For a more skilled project, you will need assistance to a designer who will turn you the patio or a plot near the house in a fabulous place, where you can not only relax, but also in full enjoys the beauty of nature that you have created yourself.

eQˠ-- It is enough to add the above proposed add-ons, and you will find yourself mentally in the south of France.

From how the tracks and transport passages are laid and related, not only the beauty of the manor and comfortable movement along the site, but also all economic activity on the territory of your ownership.

Universal "recipes" for tracing paths does not exist, as there are no absolutely identical sites.

The diagram of the road network depends on the area, form, the relief of the site and the type of construction.

The rational placement of tracks and travel is determined at the planning stage of the site, and then corrected as each new construction is erected.

Garden tracks are also a country communications

The track leading to the main entrance, and the cargo for the car is usually not packed by the soased way. A similar solution is justified for small distances and routes laid along the edge of the site (for example, from the back door of the house to the shed). In other cases, direct like an arrow, the road is impressed by stretched and dominant. To avoid this effect, it is better to soften the outlines, giving them a soft wave shape.

In small areas from strict straight tracks, it is better to give up at all. Even a small bend visually will increase the area of \u200b\u200byour possessions. The boundaries of a narrow one will spread the walking paths located diagonally or with soft turns.

Avoid overly loop tracks, especially on the way to economic buildings. Unnecessary turns cause legal irritation. In this case, most people will not go along the path, but simply will fit the path.

What is the width to make garden tracks in the country?

After the routes are scheduled, determine the width of each track.

The trails of secondary meaning - to the Bon, economic buildings, etc. Thus-narrow, 60-90 cm. At the same time, the width of the track should be 40 cm exceeded the river trolley for the carriage of goods. Width 30-50 cm - for paths in "wild" corners of the garden and a vegetable garden.

Remember that narrow tracks can not be framed by lush flower beds (see article), it is better to limit the lawn on the one hand.

Hold down the garden style tracks!

The configuration of the tracks must match the shared style of the garden.

The landscape garden requires smoothly turning and intricately "sinking" paths, the sites of the wrong spreading form.

The tracks all over the entire width or on the approaches to the sites, stairs, the buildings are gradually expanding. The tracks in the soda of regular construction are laid exclusively "on the line".

Travel tapes in this case are parallel and perpendicular to each other, fence and walls of buildings. We also use radial and circular schemes, symmetry.

Right garden tracks in the country and their configuration:

• economically consumes the land (every extra 10 cm of the width of the path "eaten" the useful garden and garden area);
• provides the shortest connections between different areas of the garden and economic buildings;
• allows you to care for plants without any problems;
• it will be possible to admire your garden and flower beds from the winning angle.

Expand to narrow and reduce the plot

Tracks from the crust

The cutting of old trees and shrubs, cropping and removing the removal shoots give a constant inflow of material for tracks.

Garden choppers vegetable waste give the second life to the wind. A chopped shallow flux is generally used as a mulching material, but it is perfectly suitable for driving tracks. So that the trimming of the branches did not "scatter" in the lawn, where they can get under the knives of the lawn mower, 15 cm of soil is removed for the track. The bed is falling asleep with chopped wood, not reaching the edge of 2-3 cm.

Such a coating is sufficiently solid to withstand a garden wheelbarrow with a load and even hire of well rings and concrete pipes. But Bosai Walking on the Twigs is a hard massage of a stop with a risk of injury. To transform the time to a constant track, dig a trench with a depth of 20 cm, while the temporary backing is removed along with part of the fertile soil under it.

Lightweight wastewater tracks

In order for the nosch country site to be convenient for life and recreation, we need not only beautiful lawns, but also convenient paved paths and sites

The network of tracks connecting the various buildings on the site should be planned so that it is convenient for us to move on the site, not stumbling, not stacking shoes and not pulling the lawn. Yes, and to the choice of materials for the pavement of tracks, driveways and functional areas of the yard, it is necessary to approach with full responsibility.

They should be durable, moisture and frost-resistant, non-slip and unpretentious care.

Stone pavement

Traditional material for paving the tracks is, of course, the stone. The natural stone is always advantageous on any plot - whether it is a patio or path in the regular garden.

For paving, the stone of the most of the most varying texture can be used - the crushing and sawn, blocking and plane, as well as their combinations. Kololaya strokes look very impressive. But it is uncomfortable to walk on it, and for the garden technology, it represents a serious obstacle. Therefore, pedestrian zones, and even more so, the access ways it is better to lay a parallery with a flat surface or a tumor, and the root stone and cobblestones use as decorative splashes in those places that can be easily circumvented.

Miracle ceramics

One of the oldest, tested materials for paving materials is a clinker brick. From ordinary brick, it differs not only with a more attractive appearance, but also less thickness, but at the same time exceptional strength, moisture resistance and durability and the people are nipplen. Clinker also perfectly opposes mechanical effects, 8 complications and significant shock loads. Clinker paving can be used in places with an intense load on the road surface - for example, when entering the site, before the garage. It looks very nice to clinker and in front of the house, and, of course, in the garden. The only lack of clinker is the price.

Decorative concrete

The largest popularity of country sites and paving slabs made of concrete are very popular. This contributes to their low compared to natural stone price. But in addition to the price of concrete paving, there are other advantages. First, this material allows you to play any texture, drawing and color.

Secondly, the existing systematization of geometrical forms and linear dimensions of concrete blocks and sidewalk-zoofors makes it easy to combine with each other with different types of them.

According to the production technology, concrete slabs are divided into vibropressed and vibrolynted. On the driveway, it is better to use a durable and resistant to high loads vibrolyant tiles and on pleasure tracks - a little less durable, but more decorative vibropressed.

Paul on terrace

To choose a flooring for open terraces and input groups, too, it is also necessary to approach. After all, it must withstand temperature and humidity differences, frost and sun, be non-slip, wear-resistant and, of course, beautiful. Ideal material for facing steps and floor porch and terrace - clinker tiles. In addition to extraordinary strength, water resistance and frost resistance, it has a beautiful appearance.

Excellent alternative to clinker tiles when laying outdoor coating on the terrace and porch - porcelain stoneware.

The material combines high strength with exceptionally low porosity, frost resistance - with inertia to chemical influences. As for the service life, there is no ceramory and demolition. For resistance to abrasion and hardness, it stands in one row with career granite, quartz and even corundum.

A very practical solution for the terraces is the use of com -Posit Decoration. A composite consisting of wood flour and polymeric binders allows you to create durable, durable and lightweight material with all the advantages of natural wood, but at the same time eliminated its flaws. The polymer decoping is not destroyed under the influence of moisture, does not fade into the sun, has high mechanical strength and resistance to temperature differences.

: How to make Rabatka along the lawn ...: Track on the lawn in the country ...

: All-season flower range, how to create a spectacular ...

: How to make a flower bed with roses ...

Beautiful well-groomed garden as a coffee picture - a dream of any land plot owner. Unfortunately, the cost of such a postcard is usually very high. What to do to us, ordinary lovers of beautiful? Let's look at how you can independently equip the garden tracks and at the same time do not bother.

A little about the design of the tracks

For a start, I want to remind you that the garden track is a mandatory element of all gardens, whatever size they are and wherever they are. This is an important link, which will tell a lot about your garden, about the feeling of excellent, about the comfort, about hospitality and about you. Therefore, I ask for the design to approach with all thoroughness, because to redo the unsuccessful option for a long time, expensive and labor.

Typically, the tracks are conveniently laying on already holling paths: as a rule, this is the most optimal route of movement on the site. Do not forget that the tracks are transit function. If the path encounters guests̆, its width varies from 0.8 to 1.2 m, as the area and budget allows. And when the track leads along the quiet corners of the garden, then it is not worth making it more than 0.6 - 0.8 m.

From the point of view of construction, the tracks are two species - capital and non-capital. The capital track is desirable in the parking lot, on a plot with an active movement - from the wicket to the house, to the frequently used zones of the garden, someone is a bath, someone has a garden, look in your needs. The capital track provides active transit, transfer / transport of goods, cleanliness in the autumn dishthele and carries a decorative function in the front zone. All other tracks will be cozy in a non-capital version - in the form of narrow paths or steph Roads for rarely used garden sections. In addition, stepper tracks are more economical.

In the ideal world of magazine landscapes, the track material must coincide with the material of the facade, porch or terrace finish. If the foundation is decorated with a stone, then the tracks must be from the same stone; If on the deranget terrace, then the paths should be made of decoping or wood combined by tone and size with Decing. As a rule, all this is quite expensive. There are other options in the real world that will allow your garden to look no worse and save a considerable amount of money.

Stone tracks

Stone is probably the best material for the tracks, time immemorial. It is great for capital lines and sites, for a long time, wear-resistant, easily tolerate moisture, temperature drops, the ultraviolet is not afraid, it is beautiful, perfectly removes Tluu and rainwater, but is demanding for the preparation of the base and to the soils.

In terms of the design of the path from the natural stone there are exactly two options. The first is a path with a concrete base that you can make with your own hands, and it will last you almost eternity. Great for parking and the front zone. The second option is a steps when the stone is combined into a sandy-gravel mixture, and the seams are sutured with lawn grass or moss. Such tracks are suitable for the rest of the garden. They effectively dismiss water, do not press the mass of paving, durable and durable.

The selection of concrete tiles is striking by variety. It can be broken small elements of all colors and sizes, for every taste and wallet. Modern concrete paving slave high-screen - it lay out ornaments, you can pick up a harmonious color, designate the center of the track with a pattern and show your designer talents. The paths made of concrete pavers will make your garden special and unique, especially made by their own hands.

Another type of concrete elements for tracks - medium and large-format tiles. Its size starts from 30x30 cm and then can be any: square, rectangular, polygonal or round. And, as in the case of a blocking, the color is variatives: concrete is painted in the mass in the plant in the manufacture of tiles. In modern design gardens, such a tile is often used on the main tracks and has a size of approximately 30x90 cm.

Traditionally, it is believed that the path of concrete tiles is demanding that the soils and preparation of the base, the presence of drainage and storm sewage. From the point of view of building standards and rules, this is true. But what to do the owners of the light plots? How to set out the tracks at the cottage at low costs?

On one well-known forum about country life, participants talk about their experiences when the average format tile laid on a layer of geotextile with sand and felt perfectly on a bunched ground for many years. Of course, I can not help you with full responsibility to recommend such a method of paving the garden tracks, but since there are practically no major options for wet soils, then why not try? In any case, it is cheaper drainage devices, a large sampling of soil and backfilling several layers of sand-gravel mixture with a rambling. Immediately make a reservation that this method will not work on another soil, except wet. The whole focus is that the tile is held with wet sand and as if sucking into it.

Also, do not forget about the possibility of filling of large-format plates of the desired configuration at the place without using the form. It is also small, and effectively. Such a reception sometimes use designers if you need to make a track from large elements. This way it is possible to simulate antique stone slabs.

Pluses of independent manufacture of concrete tiles in low cost, in the ability to choose to their taste and shape, and color, and the decorative surface of the material, and minus - in relative briefness. In the factory conditions, the concrete in the form is exposed to active vibration, which compacts its structure. In the domestic conditions, this is quite difficult to achieve. But this should not be a hindrance to arrange garden paths with their own hands with low costs.

Walkways from bulk materials

Filing tracks are beautiful in all respects - inexpensive, simple in manufacture, undemanding in care, greatly dismissed moisture and just beautiful. But there are also cons - they more often require updates, and in wet weather they will not always provide cleanliness. And still bulk materials are absolutely unsuitable for tracks with a height drop.

Raw frosting raw materials:

• gravel and crushed stone of different fractions;
• broken brick;
• marble and granite crumb;
• sand;
• pine bark;
• sawdust;
• or even shell nuts.

How to make such garden paths with their own hands? The manufacturing technology is different, from very simple - pour and dissolve (but the service life of such a path in the garden will be small) to more labor-intensive options.

It is still not bad to prepare the basis and establish a border. This increases the cost of the construction, but increases the service life and minimizes care - the material is not covered by massively in the ground, it does not appear on lawn and beds, the garden with such paths looks aesthetically, cleaner and neat.

If you look at modern or vintage English gardens, you will see there many rose gravel tracks there. Gravel and crushed stone are good for the main tracks in the country, for capital sites, and sand, bark and sawdust can be used on paths, in garden paths. When laying the garden tracks with their own hands, the size of the material fraction is chosen by our own criteria - large elements are resistant to erosion, longer serve, and small - more pleasant feet, but can stick in shoes. Speakers and sand are uncomfortable in the rain - dirt shoes and slide, but significantly cheaper than the rest of the bulk.

Wood tracks

Recently, environmentally friendly natural materials are gaining great popularity. One of the most natural-saving during power can be called a tree. The choice of materials is incredibly wide: from expensive decoping with various special fasteners to simple sleeps. Yes, and wood quality can be any. Such a garden track can become a real highlight of your country site, because it carries naturalness, which perfectly fits into the landscape and is combined with plants.

With proper processing, the tree will be very durable, it is important to carry out protective measures here and prevent contact of the material with the Earth. Such tracks are easy to care and are easily repaired. Unlike stone, they are tactile pleasant to barefoot walks. But also there are also cons of wooden tracks - in wet weather, the tree becomes slippery.

What kind of wooden tracks exist?

However, there is one important exception when the pallet path will become a permanent element of the garden: talking about forest areas. The traditional ceiling of the garden tracks is very traumaticly affected on the undergoing undergrowth: the recess of the soil, the forced trimming of the roots - all this can destroy biodiversity in the current centuries. In this case, wooden pallets are just a chopper-cut. They are easily installed, dismantled and repaired, do not require special care, and most importantly - the forest shovers. And, if you are lucky, such a track will be almost free for you.

You can also disassemble pallets on the boards and have already equipped the track.

Composite materials

The modern world is developing rapidly, does not stand still and our landscape industry. Recently, several new materials made of artificial raw materials appeared for laying garden tracks with their own hands.

• We continue about Decing, now in the context of composite materials. This is the same terrace board, only made of sawdust and composite resins, which makes Decongi excellent material for paving. It is not afraid of moisture, it moves well tolerate temperatures, retains color and does not require processing. And the composite decoping is cheaper than a natural terraced board, it's easy to make a garden path from it with your own hands and just exploit it.
• Another modern material is plastic tiles for tracks. They are different, can imitate natural materials, but the most interesting view is in the form of a lattice. Despite its opening, such elements are used in parking lots, in campsites, in other places of active accumulation of people and transport. They can be laid on the ground, sand, old tracks, the only requirement for the base is a flat surface. Such lattices are not afraid of humidity, frost, large loads. Installation is carried out manually, without tools: tiles are snapped into the mount, and laying the garden track is finished. Speecually, the whole design looks when the green grass is made through the holes.
• And the third modern material is rubber coatings. Types can be different - both tiles, and a pavement, and in the form of a roll. There is still a method of fill with the rubber composition of the required area, but it is not for self-making. Rubber coating is perfect in children's and sports areas, as well as in the humid parts of the garden - at the fountain, pool, pond. It is wear-resistant, differently in shape and color, well transfers our climate and even protects from ice in winter. This is an environmentally friendly coating.

Separately, I want to warn you from using tires for arranging tracks. Modern car tires must be the maximum wear-resistant under extreme operating conditions, it is added to it toxic components, the recycling of the tires is not in vain in special places. Therefore, and use car tires on the plot is with great care. Tires when contacting with the Earth is poisoned by her carcinogens, the plants die, and the replacement of the soil will cost a penny.

Maximum cheap tracks

And in conclusion, ideas for garden tracks from unusual materials, which are quite a lot of minuses, but there are its own applications.

Conclusion

I hope this review will give you an idea of \u200b\u200bthe diversity of paving materials and will help make the optimal choice. And if you can't decide, try different paths - the paving slabs in the front zone will not hurt the wooden tracks in the garden, and the rubber flooring on the playground does not contradict the gravel trail in the secret corner of your garden. Combine boldly!

Garden tracks, elegantly looping among the trees, add a plot well maintained and completeness. And it is very necessary to buy paving slabs to arrange the sidewalk, hire a designer and builders. It is possible to reflect paths in the garden and independently, putting the soul in their creation, and in return to get a durable, well-kept coverage that will be able to please you for many years. About how to make a garden path from a variety of materials with your own hands, we will tell you more.

Fill the stencil with a prepared solution , not allowing emptiness in its corners. Taking advantage of a small rambling, which we work as a vibropilet, we try to compact the maximum contee, and then align its surface with a spatula. After 30-50 minutes necessary for the preliminary setting of concrete, the form is neatly removed and installed near, repeating the process to the finish line.

We begin to gradually fill out the form, do not forget that the concrete should not be very liquid paid special attention to the corners, it is necessary to maximize them with a concrete solution. Since we used a plasticizer and the solution was made thick, after 15-20 minutes you can shoot the first plate and ready! Leave to stick on a day, after which they are actively starting to use

To avoid fingerprints of animals The garden paths made with their own hands are covered with a plastic film and are waiting for at least 3-4 days before becoming a new path and make a photo for memory. The full load on the concrete product can be given no earlier than in 20 days.

Last stage in the construction of garden tracks With their own hands with low costs is the painting and frustration of the interputric seams with river sand.

You can paint a new path in several ways.

• The first is to add a dye at the finish stage of the preparation of concrete . After that, you can slightly mix the concrete, having achieved uneven color or thoroughly mix the components to obtain homogeneous staining.
• The second method requires the sprinkle of the wet surface of concrete with a dry dye every time after removing the form However, in this case, only the topmost layer will be painted, which will eventually erase. Garden tracks with wiped items after such color stains, you can often see in the photo on the network.

Tracks do it yourself video benefit

Very interesting to the garden paths painted with their own hands with dye dissolved in the ground of deep penetration which allows you to achieve similarity with natural stone with low costs. Tiles under stone painted in different colors will particularly look at your garden. And the last advice: After painting, do not forget to treat the surface of the path of the path with a hydrophobizer - it will not give moisture to penetrate into the pores of concrete, destroying it from the inside.

Pour a concrete path with your own hands

Simple in manufacture, durable and externally attractive are monolithic concrete paths laid in the country area. Next, read how to make garden tracks from concrete.

Place the future track Having scored the pegs in her edges and stretching the cord between them at the necessary height. We take into account that the optimal fill thickness ranges from 7 to 10 cm.

Prepare a sandy pillow . To do this, dig a trench with a depth of 20 cm, they grow her bottom, set the lighthouses and put geotextiles, overlapping this material also the slopes of the trench. After that, we fall asleep a pit of 2-3 layers of sand with an intermediate spray and the rubbing of each layer. It is possible between two adjacent layers of sand pour a layer of small rubble. This will strengthen the drainage properties of the pillow.

Laying agrovolokna sand pillow sprinkling sand pillow

Cooking concrete . You can use the recipe from the instructions for filling forms. If you need a paving track of high strength, for example, for travel or parking a car at the cottage, then take 1 part of the cement (not lower than the brand 400), 1.5 parts of the sand and 2,5-3 parts of rubble or gravel. An ideal volumetric ratio is 1 part of water on 3 parts of cement, but to increase the plasticity of the liquid, add a little more. Do not forget that the smaller the water is in solution, the stronger the concrete coating.

For garden tracks Used formwork From wooden boards with a thickness of at least 20 mm. It is better if the width of the boards will be equal to the thickness of the fill, otherwise they will have to boil them into the ground. The boards are required to nourish the inside of the pegs.

Through smooth gaps set the separators In order to create deformation seams. When making a track in the country, the separators can be used from a girlfriend. For these purposes, smooth, narrow strips of drywall, glass, thin boards, laminate trimming, siding, etc. are suitable. In order to remove the separators after setting the concrete, it is necessary to lubricate them with any suitable lubricant.

We perform reinforcement design To increase its strength. As a reinforcing grid, a grid of a chain, trimming of reinforcement, pipes, etc. is used. Of course, it is best to take advantage of the welded reinforcing belt from the rod with a diameter of up to 8 mm, with a cell 100x100 mm. The reinforcement is exposed at half the height of the track, using bricks or clamps from the same rods.

Pouring garden tracks is performed to the top edge of the formwork . Next, with the help of a tamping, we compact the surface before the cement milk appears on the surface of the path, and then align it using the rule. Next, we cover the path with a plastic film and wait at least 5 days before removing the formwork. The full load on the concrete can be given no earlier than 3 weeks.

Decorate a path You can in several ways.

• First, the surface can be painted or bonded with marble or ceramic tiles.
• Secondly, you can apply a drawing with a curly spatula, a screwdriver or a rough brush.
• Thirdly, you can paint the concrete itself even at the cooking stage.
• Fourthly, a gravel or pebbles can be pressed into the wet layer, laying out intricate patterns.

In a word, a garden track from concrete can be original and attractive as on numerous videos of popular Internet resources.

Saddow track made of paving slabs with their own hands

If you plan to equip the garden tracks with your own hands, then this method will not suit you. Favorite tiles do not call cheap material. On the other hand, such paths have a lot of advantages and there are practically devastations. Look at the video in which such a garden track is stacked with their own hands. Not so difficult, right? At first glance, it is. In fact, in order to be laid at the dacha, the paving path pleased the eye for a long time, careful preparation of the base and maximum accuracy and accuracy in work are necessary. So, how to make a path from paving slabs with your own hands:

1. Choose tiles . At the same time focusing not only on the design, but also on its operational features. For example, for the tile, which is planned to ride a car, the ability to resist increased loads.
2. Forest tool . For our work, we will need: trim, rubber hammer, rambling, level, cord, pegs, pipe or dvuhvr, sand and cement.

1. Location Future tracks . To do this, score pegs and stretch the cord at the necessary height.

1. Prepare the foundation . The successful operation of the track will depend on this work throughout the service life, so we approach the implementation of this stage most responsibly. To do this, as accurately align the base, removing some of the soil on elevations and beaged in lowlands. In the process of work, the soil is constantly tamped, wetting its surface with water.

We calculate the depth of the base at the calculation of the height of the tile plus the height of the sandy layer. To the value obtained, add a couple of centimeters to the shrinkage. As a rule, the depth is equal to 20-30 cm. Do not forget to create the necessary slopes for water drain from the surface.

1. After leveling the base laid geotextiles . He will not give the weeds to grow into intercutric seams.

1. Sweep the sandy pillow , shed it with water and trambam. After that, we recall her surface profile, leaning on pipes or beams installed on the distance from each other.

1. We prepare the mixture Of the 1 part of the cement and 3 parts of the sand, which is laying down on the base and perform a screed with a heap or a channel.
2. Tile laying start from the curb in the direction of "from ourselves" . The initial row is posted clearly on the cord installed on the chamfer. At the same time, 1-2mm crosses can be used to form seams of the same thickness. To ensure the required height, the craftsman is being plugged or removed the sand, tamping it in the process of work. At the same time, do not forget to constantly monitor the quality of laying with the help of the level and the image. If you need to dock to other buildings, then if necessary, it is possible to cut it with a baccle with the installed circle to work on the stone.

1. After the last series is laid, we fall asleep the seams with a sandy cement mixture and pour them with water.

The border mounted on the edges of the paving path will prevent the tiles offset and retain the integrity of the structure. In the course of operation, sand from the seams can be washed out with water, so it will be necessary to periodically plug it.

Tree garden track

About how to make garden tracks from a tree, many dachas think about, because this inexpensive and affordable material is always at hand. In addition, it is possible not only the classic version in the form of installed sleeps, but also to install beautiful and functional paths in the country, for example, from such a healthy material, like euro pallets.

Material for sleeping can serve as a bought log house and fallen trees from a grove, which is located next to the site. Making wooden garden tracks with low costs will help chainsaw, which is not necessary to buy if you can seek help to a friend.

For the arrangement of the track, follow next instructions:

1. We place a place under the path and the couch trench depth is 10-20 cm.
2. We laid waterproofing, taking into account the overlap not only the bottom, but also slopes.
3. As a drainage, we fall asleep the bottom of the trench of rubble.
4. Fall over 10 cm of the sand layer as a cushion under the heap.
5. We establish a speech, alternating thick logs with thin branches for maximum filling of space.
6. I fall asleep the gaps between the sleeves.

You can install the heap in such a way that their upper part will rise by 3-5 cm above the surface. The track of this type will be much less polluted into slush and rain.

On video, you can often see how cool the garden path looks like a wooden plank. But such a material like euro pallets is great for our purposes, and the cost of such a material includes only its delivery to the site. At the same time, the pallets are produced from durable wood, which when processing antiseptics will be able to serve for a long time.

To prepare boards, they are cut into segments of 50 cm, grind, treated with a protective agent and paint or varnished. The flooring itself is performed by this algorithm:

1. From wooden bars, lags are arranged, which fasten between themselves with the same bars using the mating "in Polterev".
2. Cover the design with bitumen mastic, which will protect the frame from rotting. The same mastic covers the lower part of the boards.
3. Fill the boards, leaving the clearance between them 10-20 mm for water drain.
4. Additionally cover the launch of lacquer or paint.

Drinking nails, try as you can drill their caps in wood as deeply. This will allow you to walk along the path of the barefoot, without fear of going.

Prices for forms and materials

Everything necessary for the arrangement of garden tracks can be sought in the respective sections of the Lerua Merlin store. "Garden paths" and other sections of the catalog have hundreds of positions of the necessary tools and materials. At the same time, it is impossible not to note quite democratic prices.

Thus, the cost of the shape for the garden path in Lerua is 507 rubles., Which, you see, quite inexpensive, given its reusable use. A concrete mixer, of course, will cost you more expensive, - 120 liters of the unit has a price of 5690 rubles, but it will greatly facilitate concrete work.

Dyes for concrete

Dyes for concrete start with a mark of 603 rubles. For 700 g, then plasticizers can be bought for the minimum price - 149 rubles. For capacity weighing 600 g. Answer questions about how to make tracks in the country with their own hands or tell about the features of the use of certain materials will be able to consultants of the store. The shape for a garden path, purchased in Lerua Merlen, will save a fairly significant amount when arranging paths in your garden.

If you have not yet decided how to make a path in the country, see the photo gallery located on our website. Interesting solutions using various ways to arrange garden tracks will help you choose the most optimal option, make the necessary edits and create your own unique design. And maybe, soon the photo of your site will appear in the first lines of search results.

The first thing that meets for the country gate is a garden track leading to the porch. From it in all directions: both to the bath, and to the garden, and to the garage - similar trails and tracks are missing. It is always more pleasant to go on a solid, well-kept covering, especially when it is wet from rain grass or clay soil. Forget about the designers and try to make garden tracks with your own hands, and for this you will need only a desire and building material, affordable and inexpensive.

What classifications are not available - and according to the material for manufacture, and by location, and size. We will take division on species based on the method of the device.

Garden trails

This is a natural look, as the paths appear by themselves, without special planning. Usually they are protusive people's legs or tamped the wheels of garden equipment and serve to connect the most important points of the site - houses, baths, garden, garden, gate. The usual primer trail has cons (dirt after rain, puddles, grazing grass), so it is possible only as a temporary option. The trail, by the way, can also be created: it is enough to lay out a border from cobblestones or paving slabs along the edges.

Garden trails - the optimal option for plots located in dry areas

Tracks with backfill

It is easy to arrange: you should pull out a ditch, approximately 100 mm deep, lay out on the bottom and edges of geotextiles (density of at least 150 g / m²), strengthen the sides of the border ribbon. It will remain on the finished base to fall asleep pebbles, crushed stone, marble crumb or dropout. If this option seems simple, one can additionally be put on the surface stone or concrete slabs - ordered or chaotic. For the convenience of movement, the slab should be dried in the backfill so that they are on the same level with the surface.

Picking gravel or rubble of different colors, you can decorate the paths or divide them to zones

Solid faded tracks

A durable coating is perfect for a large load. The prevention of garden tracks occurs on a concrete basis with further laying on it decorative elements: tiles, paving slaves, natural stone. The use of a different color material gives the decor a natural look. It is better if the finished object will rise above the soil by 50-70 mm - it will relieve it from the erosion of water and soil nanos.

The tracks from the plates or stone laid on the concrete base are distinguished by reliability and durability.

Use in the work of wood spins and bars

Budget and beloved by dackets option - garden tracks from wood. Two types are most popular:

• using wooden bars;
• from wood sleeps.

If the climate is rather dry than wet, you can use wooden bars or thick boards, which are easy to purchase in any construction supermarket. It is better to stay on solid trees. The same segments are cut (100 cm long, 30 cm wide and 15-20 cm thick) and fit on the prepared base - gravel or sand.

Each bar should be treated with fuel oil or special composition protecting with humidity and rotting. For the same purpose, liquid asphalt is applied to the underground part of the bar, and sometimes it is suitable for a standard sandy pillow. Such combined coatings are better stacked in the fall, since in winter the soil occurs, at the expense of which a natural mummy is performed.

For tracks from wooden bars it is better to use fine gravel or crushed stone

Using smiles of different sizes and color, you can create unique paths of tracks

Old fallen trees at the cottage - a real find for craftsmen. Split trunks on the parts, from the obtained elements - sleep - you can make wooden garden tracks that look equally well, crossing the lawn or looping among flower beds. There will be not only trunks, but also thick branches, of which it is convenient to fill out empties between large elements.

Screening strengthens individual elements, and Geekanin protects the path from germination of grass

So that wooden products serve for a long time, they need to be processed from all sides of the hot oil, it is better to repeat the procedure twice. Between the spil and the soil put a piece of geotextile or polyethylene.

Short master class on laying paving slabs

With the help of pictures and descriptions, you can imagine how to make - material of noble and durable.

The paths from the paving slabs of the wrong shape look more naturally than straight

To work will be required:

• wooden mystery;
• rubber hammer;
• stakes;
• master OK;
• building level;
• cord;
• rake;
• broom;
• watering hose;
• channel;
• manual traam.

Materials: Paving tile (thickness 50 mm or 60 mm), curb stone, crushed stone (fraction 20-50), dry mix for plaster or cement M400 (M500), sand, geotextile.

Now consider all stages of performance. The first stage is planning. It includes creating a drawing, a selection of laying and shape patterns of figure elements, a choice of color (or several colors). At the same time make the calculation of the number of tiles (including spare) and the consumption of the rest of the material.

There are many laying schemes paving slabs based on alternating products of different color

Next, perform marking. Accuracy of actions - one of the conditions of proper laying. Roulette, pegs and cords will help determine the boundaries of work. Sometimes you need to walk along the alleged path to understand how it is more convenient to lay it.

Marking accuracy and sequence of work are important for the device track of paving slabs.

After marking, it is necessary to prepare the base. To begin with, it is necessary to cut into a depth of 20 cm. The top layer - Derne. If the soil is clay, will help drainage. Then you should create a sandy or gravel pillow and cement (concrete) screed.

The multilayer base under the tile is necessary so that the track is durable, not sedated and did not blur

Between the layers of sand and rubble, you can pave geotextiles that makes the design more durable. The top layer is a dry mixture purchased in the store, or the prepared composition of sand and cement. The layer of the mixture (3-4 cm) should be dissolved using rhinestones and schuleler.

Uniform distribution of cement mixture is produced using conventional garden robble

Surveillator for leveling surface can be replaced by a conventional wooden beam.

Now we hold the tile laying. The direction of laying is from ourselves not to spoil the base. Products should be placed tightly, but with a gap of 1-2 mm. Each tile must be tamped with a wooden painting. At the end, check the level and end the rubber hammer. First, the whole elements are placed, and only at the end cut the paving slabs and laid missing pieces.

For high-quality laying of paving slabs, simple tools are needed - rubber hammer and wooden cizyanka

For the convenience of laying, first of all there are entire products, leaving the emptiness

Empty along the curb fill in pieces of tiles of the required magnitude

On the edges, the border is laying out, fix it with a solution M100 and fall asleep with sand. The seams between the individual elements fall asleep with a sandy cement mixture, which is then moisturized by water from the hose. Add a mixture to the place where she squinted, and repeat watering. After 2-3 days, the track will be finally ready.

Garden cement paths with their own hands

Video instructions from 7 parts to work with finished forms

Natural stone tracks: century strength

Spectacular garden tracks can be made from the material remaining after the construction of the house or the housekeeping decor, for example, the Alpine slide. The painting of the paths is created due to uneven shape and different size of the stones.

To create a beautiful walkway, the stones of different sizes and color are suitable

The first stage is the calculation of the number of large stones. To do this, they can be laid along the future trail. The base for laying is a pillow of sand, filled into a shallow ditch, right to the ground.

It is possible that they will need to handle the stones. Bulgarian helps or a more serious tool. You can position the finished material in two ways: in the form of a pattern (relief, mosaic) or in chaotic order, alternating large stones with smaller. If you do not score the seams between the stones of the cement mixture, after some time they touched the grass. This option is also possible, it looks more natural.

The scheme indicates the approximate thickness of each layer, which should be followed during the laying

The combination of stone of different types and plants is a pattern of a track suitable for a stretch in the Mediterranean style

Stone paths and tracks are appropriate when creating a landscape picture of any style.

Modern barcode - use of plastic modules

If there is no time to build a solid stone or tile coating, but there is a desire to quickly set the paths in the garden with your own hands, you can use the temporary option - garden plastic tracks. Finished modules, most often the same in size and color, sold in the store.

The color of plastic modules is chosen depending on the site to which they will be laid. Most often these are green or black products

In addition to low cost, plastic tracks have other advantages:

• retain the form and appearance for a long time, slowly wear out;
• have holes so that water does not accumulate and went to the ground, that is, they do not form puddles and do not create odor;
• plastic is practically not amenable to rotting;
• do not require constant care and attention, clean and clean with water from the hose;
• resistant to chemical exposure;
• quickly mounted and assemble on the principle of the designer;
• the same easily fit on any base - sand, deurn, clay.

At the end of the summer season, the plastic modules are dismantled, wash, dried and folded in the utility room until next year.

Plastic paths - a successful option for creating temporary tracks on lawns

The tracks in the country area create not only for practical use, but also for decorating the territory

In addition to the above options, there are other types of garden tracks - bricks, from a parquet board, from concrete blocks, as well as all sorts of combined options. The main rule for the choice of material for the track: it must be combined in texture and color with the house and other buildings.