Toilet with a bidet feature connection. Installation of a bidet: installation order and connecting plumbing equipment to engineering commensunities. Design and purpose of bidet-prefix

By installing the houses of the toilet with the function of the bidet, you can save the useful area of \u200b\u200bsanitation, make the care process more convenient and reduce the time that is usually spent on conducting personal hygiene procedures. Products such a design are presented in a wide range of assortment, which should be understood. Is not it?

We will tell you how to choose the most successful, functional and externally attractive option. In the article submitted by us, all the guidelines will dismantle, which will help to decide on the best model. Popular products leading in the market are given, and their manufacturers.

Plumbing hybrid in one design combines the functions of the classic toilet and traditional bidet. Externally, the module resembles the most common compacts and differs from them only a slightly elongated bowl and a larger drain tank, which is hidden an extra container feeding water for the bidet.

Some plumbing manufacturers produce models without a flushed rim. This significantly facilitates the care of the product and protects harmful microorganisms from reproduction. Vertical flushing allows you to fully clean the drain bowl at all, without splashing water to the floor or nearby objects

On the rim of the bowl or under the rim on the fitting there are special nozzles (bidets), according to which water is supplied from the hidden reservoir for hygienic procedures. When you want to use this feature, you just need to press one button.

From the nozzles under the side of the toilet or from the retractable fitting with the sprayer at the free end will begin the necessary warm water for the ablution. Upon completion of the procedure, the fitting will return to its previous place and it will be installed strictly inserted with a toilet rim.

Options for performing modules

Having the same basic purpose, the toilet with the function of the bidet differ from each other by the type of fastening. Plumbing manufacturers offer customers outdoor, wall and angular models that have a wide functionality and an attractive appearance.

The variety of forms and design solutions allows the consumer to choose a product personally for itself by creating a maximum level of individual comfort in the bathroom.

Outdoor types of sanitary ware

Floor toilet, equipped with a bidet option - the classic module presented in the plumbing market is most widely. Externally, it looks like a traditional compact and with strong fasteners mounted in the bathroom to the floor, regardless of the indoors the finish decorative coating is laid.

The toilet with the function of the bidet can be installed in the sanitary room with their own hands and attach to the floor with special parts, usually running off with plumbing

Products of this type have tacks of different sizes and configurations. The aggregate control is carried out in mechanical, semi-automatic and automatic mode. The most "tricky" models are supplied with an additional regulatory unit on which you can set the desired parameters for comfortable operation.

Features of suspended products

A module with a bidet having a wall mount is a modern, practical and convenient multifunctional unit. It takes a minimum of space, makes it possible to rationally use the bathroom space.

In addition, the device of this type makes individual hygienic procedures more comfortable and allows you to carry out planned cleaning of sanitary premises without effort.

Hinged toilet with the option of the bidet is ideal for installation in a small bathroom. One of the important advantages of such a design - simplicity, convenience and availability of cleaning directly under the drain bowl

All communication compounds do not remain in sight, but hiding behind the false wall. When entering the bathroom, the user sees only the sanitary appliance and a neat drain button. The installation process of the device is slightly more complicated than the installation of an ordinary compact, and necessarily requires the use of the installation system.

Such a design allows you to "drown" into the wall of the tank and other unaesthetic connecting elements. To keep the design reliably and did not vibrate during use, the carrier frame should have a margin of strength and have the ability to withstand weight up to 400 kg.

Choosing suspended options, you should prefer easier products. Heavy models with a large number of decorative elements will have too strong load on the wall and in the process of long intensive operation, this may cause problems

There are no restrictions on the equipment of the floor covering either. Can be organized in sanitary facilities heated floors or put the surface with a decorative mosaic. Hanging on the wall of the toilet with the function of the bidet will not prevent this and will allow the most unexpected and original interior ideas of the owners into reality.

Corner devices for saving space

Sanitary nodes with complex layout or small bathrooms appropriate to equip the corner toilet with the bidet function. Many companies operating in this area produce such.

In the assortment submitted for sale, both outdoor and suspended options with. Such a plumbing allows us to use the useful area as rational as possible and gives originality to a compact room.

Most rationally place the corner device as close to the sewer plum. If you remove the unit for a long distance, the connecting corrugation will often be clogged and will require regular laborious cleaning

Corner modules are mounted to the floor as simple as classic compacts. Some complexity represents the moment of connecting to drain communications, but this question is quite solving. It is enough to connect the release of the toilet bowl with the sewer tube, and the system will work perfectly.

To install the attached product, installation will be required, and not normal, but special, angular. Its frame part with dowels or anchor bolts are attached to walls and semi. A drainage tank, as a rule, already attached to the design, has a minimal thickness (no more than 8 cm) and does not interfere with a convenient location under it the drain bowl.

Material - an important parameter when choosing

One of the most important parameters of the choice is the material of products.

Leading in the segment manufacturers use to produce their plumbing:

faience;
porcelain;
decorative rock;
plastic.

Each type of material has its advantages and minuses, which determine the choice of buyers.

Fayans apply most often. It has a porous structure, a dense, opaque shade and absorbs moisture. The strength of the material is not too high, so manufacturers make faience products with thicker walls, otherwise the service life of such plumbing will be very limited.

Due to the fact that the composition of the faience includes up to 47% of kaolin clay, the price of products is held within reasonable and does not scare consumers with plenty of zeros.

Faianesum toilets with a bidet function are characterized by a lot of weight. This should be taken into account when buying and installing, especially if the device is planned to be put in old rooms, where the service life has already been released or approaches it.

The share of kaolin clay in the porcelain does not exceed 20%, so porcelain products look more aesthetically and demonstrated good strength, durability and resistance to impacts. Due to the high surface density, they do not absorb water and preserve a shining appearance for a long time.

Dirt and unpleasant odors, literally, "fly away" from the porcelain, so care for such plumbing modules requires minimal effort.

Porcelain plumbing costs somewhat more expensive than its faiences and competitors, but these costs are justified. Its service life is almost 2 times higher and care for it is much easier

Models made of natural stone look attractive and distinguished by unsurpassed hygienic. But such products at a price seriously exceed even expensive porcelain appliances. In addition, they weigh a lot and are very afraid of mechanical damage.

The aggregates from artificial stone are more practical and not so afraid of shocks and damage, and they are not so high. Buying this "exotic" is determined by the interior need and personal desire of the owners. From a practical point of view, this option is not too appropriate.

Plum Classification

When choosing a suitable toilet with a bidet option, you must necessarily consider such a parameter as a drain system device. All subsection will depend on this.

If the outlet of the device does not coincide with the sewer input, you will have to completely remake the communication wiring, and this is not only additional financial costs, but also a large-scale "dirty" work.

Drain in the toilet places equipped with the option of the bidet is horizontal, vertical and oblique. The horizontal option is considered to be classic and allows you to connect the bowl with sewage rummer without using the angular elements.

The nozzle for connecting to the release into the sewer is located in the back of the module and easily connects to central communications by means of a corrugated hose.

So that the horizontal release does not clog and prevocate the emergence of an unpleasant smell, you need to very clearly put the plumbing on the floor and take into account the necessary slope of the drain pipeline

Vertical release is more characteristic of the houses of the middle of the last century and for typical modern cottages. Such a system is equipped with the purpose of saving space.

The sewer pipe is directly connected to the nozzle at the bottom of the plumbing module and goes to the floor. Connecting communication nodes are not visible to the eye and do not spoil their presence interior of the room.

Vertical drain is convenient and practical, but requires the installation of the toilet in a strictly defined location directly above the sewage opening. The use of the elongated corrugation in this case is structurally impossible

In models with oblique release, the output bowl is designed at an angle of 30 ° -45 ° to the floor. Thanks to this feature, mount pipes located at different heights from the surface will be much easier. But the modification has a minus, namely, a potentially possible hydraulic blow when the water is descent.

The joining of products with oblique release to sewer systems should be done very clearly and securely. Otherwise, during operation, leaks will inevitably appear and the persistent unpleasant smell will constantly attend indoors

In addition to the above options, there are universal models. They do not have their own pipe, and the release channel is hidden inside the toilet. However, they are not too wide yet.

Shape shape and design

On the form of a bowl of the model are divided into funnel-shaped, visors and disc. The first drain hole is located directly in the center and provokes the formation of splashes. Cambage prevented the spread of splashes and drops, but have a lower level of hygienicity, since the feces are delayed in the residues of flowing water.

In the visor versions, the splashes do not fly to the sides, and a slightly displaced drain hole makes it possible to make a high-quality, smooth descent, not leaving on the surface and traces.

In addition to the main parameters, you should pay attention to both unique characteristics, such as the shape and shade of the product. Times when in free access was plumbing only white, have long been riveted in the fly.

Today, drop-appaled, rectangular, round, square and cylindrical modules made in any exotic tones are available for purchase. If you wish, you can find devices with original painting, ornament or patterns.

By purchasing models with a pattern or spraying, you should not save. The painting made by high-quality dyes will well hold on and for a long time to delight the eye. But cheap coating rapidly places and plumbing will acquire a non-accurant, unclean species

Unusually decorated models will make a highlight to the stylistic design of the bathroom and will make it the only and unique. Of course, such devices will have to spend much more financial resources. But what can you do for the sake of arrangement in the apartment or house comfort, additional amenities and a pleasant atmosphere?!

Set of additional functions

Manufacturers manufacturing modern plumbing modules equip them with various progressive functions and devices.

Toilet and bidet hybrids can have elements such as:

water electric heater, providing the water used, suitable and comfortable temperature;
the thermostat that limits the feed in the nozzle is too cold or excessively hot water;
multistage pressure regulator, which makes it possible to adjust the level and strength of the jet individually under each user;
the pendulum movement of the nozzles making the procedure of ablution of better and more pleasant;
device adjusting the length of the exit of the fitting;
the function of hydromassage with a set of different modes (vibration, ripple, waves, etc.);
fast drying of the skin, allowing to abandon the use of paper and napkins after the hygiene shower procedure;
the ability to switch drying to the air jet for aeromassage;
microlift contributing to the smooth automatic lowering of the toilet cover;
option activation of ventilation after using the toilet
protective coating with silver ions, effectively repulsive dirt from the surface and not giving a multiply pathogenic microflora;
automatic washing in full immediately after closing the lid;
additional buffer container supplied before draining water disinfectant liquid, carefully disinfecting the nozzles and the bowl itself;
programmable refreshment of the room by automatic spraying of air flavoring;
infrared sensor reacting to the presence of man, etc.

The large number of functions "Nazpigan" Plumbing unit, the higher its cost and the level of comfort of use.

Rating of models and manufacturers

Plumbing equipment market offers a huge amount of hybrid units. Among the leaders of the segment, the Turkish company Vitra is allocated, manufacturing toileties with the function of the bidet in different price categories.

The most popular from consumers is used by the brand outdoor faience product from the Grand line. The model is included in the category of budget, has a standard set of necessary functions, a classic universal design and a reasonable price.

Crand toilet with a bidet option from the Turkish manufacturer Vitra successfully fits into the interior of the bathroom and does not take up much space. Mechanical drain makes it possible to completely clean the oval bowl, without leaving no traces

If there is a desire to purchase something more exquisite and unusual, it is worth paying attention to Vitra Serenada. This option is made of porcelain and weatheted in retro style.

Outdoor bowl is made in the form of a rectangle and is equipped with a universal release. Accessories has a chrome coating that protects the elements from corrosion. The functionality contains the ANTITIX System, and the seat is supplemented with a comfortable microlift.

Vitra Serenada is an expensive, but very exquisite hybrid model. Straight lines emphasize the simplicity of form and give it an elegant appearance. The qualitative china, from which the module is created does not absorb water and even over time is not covered with spots, does not yellow and does not acquire a specific smell.

Interesting hybrids produces the famous Belgian company Ideal Standart. From its products, buyers choose the ECCO / EUROVIT line model, which are distinguished by modern design, compactness, high quality level and quite affordable.

Products from the ECCO / EUROVIT series are made of sanitary porcelain. The functionality includes the Anti-Spex system, but the module does not include the seat. It needs to be acquired separately

A truly luxury plumber supplies the famous Swiss concern Geberit International, which is engaged in the release of Plumbing more than 100 years. The block of toilet bowls equipped with a bidet option is highlighted by two bright representatives: AquaClean 8000 and Geberit Aquaclean 8000 Plus.

Modules "Putting" with all sorts of frills and meet the requirements of the most demanding customers. True, the cost of plumbing "miracles" is also quite large, however, for increased comfort and European quality clients agree to pay.

The progressive health of the AquaClean line is equipped with water heating functions with the possibility of individual temperature adjustment, an infrared sensor that signals the user's approach and the device of the pendulum swing of the hygienic soul

The described models are included in the list of the most popular and purchased, but the choice is not limited.

Plumbing stores provide a rich assortment of certified products from different manufacturers and satisfy the demand of buyers with any needs both in cost and in the level of comfort.

Conclusions and useful video on the topic

General descriptions of toilet bowls with a bidet function. A detailed overview of the principles of work, water supply and elementary rules for use.

All the most interesting details associated with the hybrids of the UNTAZ + bidet - information from the official distributor. Pros and cons of products from famous brands and practical recommendations for choosing the most suitable model.

Comparison of various types of toilet bowls with the option of the bidet, nuances of models manufactured by popular manufacturers.

Buying a toilet, equipped with a bidet option - a practical acquisition that significantly improving the comfort of the daily procedures of personal hygiene. The module is easily placed even in a small bathroom and harmoniously fits into the interior solution of any complexity.

Select a model of suitable design and color, with the right amount of options in a plumbing store. The seller will provide all the necessary information about the product and will show certificates confirming the purpose of products and certifying its high quality.

Want to talk about how they bought plumbing with a bidet function for their own bathroom? In your arsenal there are benchmarks affecting the choice, or technological subtleties that make it easier to install? Please write comments in the block below, share useful information and photos on the topic of the article, ask questions.

Today, the bidet enters the every majority of our compatriots.

If you decide to become the proud owner of this extremely useful device, it will not be superfluous to learn to carry out its installation - this will allow you to save a little.

Let's see how the bidet is set to the various types of your own hands.

Let's start with the easiest in the installation of varieties - a toilet bowl bidet. As clearly from the name, this device combines both functions, which is very convenient for those who have no free space in the bathroom.

The toilet bidet is installed in the same way as the usual toilet, only to special pipes it will be necessary to connect hot and cold water supply with a flexible liner.

Bidet and toilet

In the "hot" pipe, the cutting pipe is made according to the usual scheme, but to the "cold" most convenient to connect in the place where there is already an insert for water supply to the tank: they screw the tee here, and then the lines on the tank and the mixer are connected to his removals. Built-in bidet.

If the model is electrical on the wall behind it (so as not to be stuck) will have to install an electrical outlet with a grounding. It must be connected via the UDO, which is triggered when current leaks from 10 mA.

Connecting a separate bidet

Although a separate bidet is reminded by a toilet, its installation is more similar to the installation of a washbasin. Act in such a sequence:

Implement the instrument assembly (connect to the bowl mixer and siphon).
Choosing a suitable place, fasten the bidet to the floor or wall (suspended model).
Connect to the mixer water.
Connect the siphon to sewage.

Bidet connection circuit with dimensions

For the electrical model, the wire is kept in the box and install a socket.

Installing the mixer and siphon

In a bid, you can see three holes:

to install the mixer;
to connect the siphon;
to connect a pipe overflow.

The mixer is installed like this:

On the bottom of the bar, the stiletto dresses the gasket (usually comes in the kit).
Next, the mixer is installed in place, while the studs are skipped into the holes intended for them in the bowl.
Under the bowl on the studs, another gasket dresses, and behind it is a metal washer.
Nuts are screwed on the studs and are delayed with moderate effort. If the structure of the bidet does not allow you to freely operate with a horn key, you should use the end.

While the bidet is not fixed, you can fasten a flexible liner to the mixer pipes. The gasket in the tubes is already available, so it is not necessary to compact the connection of the panels or the fum-ribbon. The effort with which the nut flexible nut is delayed must be moderate, otherwise the gasket can be damaged.

To ensure that the gasket damage is guaranteed when tightening the nut, put the gasket from the paronite over it.

Siphon is not always supplied with a bidet. If you have to purchase it separately, do not forget to pay attention to the presence of a pipe for connecting a pouring pipe.

Connecting siphon

Installation procedure:

If included with the bidet there is a bottom (drain) valve, which should be opened simultaneously with the mixer, then you first need to install it according to the instructions. Subsequently, the lever of this valve will need to be connected with the mixer. If this valve is missing, we install a drain grille on an unwindled silicone sealant. For her fixation, a nut with a wedge-shaped ring is used.
Siphon is connected to the bottom valve or grille.
It is connected to the siphon outlet with the assignment of the gofroshlang existing on it.
In the hole of the overflow is installed on the gasket designed for it.

The overflow grille is connected using the Hofroshlang nut, the second end of which is fixed on the overflow nozzle of the siphon.

Fastening to the floor / wall

The place for the bidet must be chosen so that it is located closer to the toilet, but at the same time they were comfortable to use. The device must be free space at least 0.7 m. Deciding with the place, proceed to the attachment of the bidet.

This is how the outdoor model is installed:

The sole of the device standing on the floor is distributed by the marker and the position of the mounting holes also mark.
Next, the bidet is laying the side and again outline its sole on pressed a piece of linoleum or rubber. Again, you need to mark the position of the mounting holes.
On the contour of the linoleum / rubber cuts the gasket.
In the floor according to the applied markup, holes with a diameter corresponding to the diameter of the sleeves of dowels or a special fastener for toilet bowl are dried - depending on which one will be applied. Ceramic tile should be passed as careful as possible using a special spear-shaped drill and setting a low rotational speed of the drill cartridge. Impact impact, of course, is unacceptable.
Removing the garbage remaining after drilling, the holes are installed for fasteners.
Then lay the gasket (on the floor, as the reader remembers, the sole contour was drawn). On both of its surface you can apply silicone sealant.
It remains to be installed on the gasket of the bidet and fasten it to the floor selected fasteners.

Fastening the suspended bidet to the wall

The one who deals with the suspension bidet should do the following:

Collect the frame (called "installation"), as indicated in the instructions. In stock must necessarily be adjustable legs.
Insert the kennel with the cuff installed in the frame available on the frame.
Install the frame in the desired position, controlling the horizontal and verticality, respectively, the level and plumb. The legs need to be adjusted so that the bidet is located at an altitude of about 40 cm.
Note the marker on the wall and the floor of the mounting holes.
Assembling installation, drill holes and, removing the garbage, insert the sleeves of the dowels in them.
Install the frame and fasten it.
Connect the sewer tube installed in the frame to the common sewage system.
Fix the water pipes on the frame and connect hot and cold water supply to them. It is necessary to sum up the pipes, and not a flexible eyeliner, since all communications due to hidden gaskets must be as reliable as possible.
Fasten the cutting valves to the nozzles and then, feeding into the system water, check the tightness of all connections.
Screw the studs in the frame, fixing them with nuts. After that, on the studs you need to wear protective sleeves, which will prevent clogging of the thread in the course of installation of plasterboard.
Install the plasterboard partition and conduct water pipes and sewage wheels through it.
Put on the studs first a special rubber or silicone gasket, then the collected bidet. After that, nuts that lock the device are screwed on the studs. It is necessary to delay them with moderate effort so as not to deform plasterboard.

It should be noted that the gasket between the bidet and the wall plays a very important role. If it did not turn it out in the kit, it is necessary to simply apply silicone on the bowl (sold in tubes) and, waiting for its drying, to make installation.

Connection to water supply

To connect the bidet to the water supply, you need to screw the nuts of the flexible eyeliner connected to the mixer of the bidet, on the tees embedded into the pipes (for the floor model) or on the connector installed in the frame (for the suspension).

Connecting the bidet cover for water supply

In all cases, it is desirable to install shut-off valves, by means of which the bidet can be cut off from water without disconnecting the entire system in the apartment.

Connect to sewage system

Connecting a sewage bidet no difference from connecting a washbasin:

In the sewer of the sewer tube you need to insert a rubber cuff. Since rubber with time dissipates, it can be lubricated with silicone sealant for reliability.
The end of the rejected corrugation, connected to the siphon, is also lubricated with a sealant on silicone basis.

Installation Scheme for Bidet

After that, it remains only to insert the glood corrugated in the cable of the sewer tube.

Drain for bidet

During the use of the bidet, water is often falling on the floor. Therefore, it is extremely advisable to arrange a drain in the floor, just as they do in public shower.

The volume of work will have a lot of work:

The floor is shot down to a concrete base.
On the base, waterproofing is laid.
It is installed and connected to the sewage dance - a drain funnel with a siphon.
The sheets of extruded polystyrene foam are stacked on the floor. The ladder and the pipe deploying from it are reliced \u200b\u200bfor which in the foam you need to cut the grooves.
The film is laid over the foam, and then the screed of such a thickness is styled so that the ladder is filled with the bottom line of the flange.
The floor is covered with rubberoid. It carves a hole with a diameter corresponding to the inner diameter of the ladder, so the flange is covered (under the screws need to cut holes).

The upper part of the ladder is installed, after which the screed with a slope and the tile is placed.

Video on the topic

Toiletz - the usual element of the bathroom or toilet. But the bidet meets less often. Although those who installed it in their apartment are talking about the convenience of this sanitary and hygienic equipment. Often the bidet is not used due to the lack of free square. But for such apartments there is an original solution - the toilet together with the function of the bidet.

Appearance

On similar to the usual toilet. If you look good, you can see that the bowl is a little longer, and the tank is more. It is there that there is an electronic equipment that manages the work of the bidet. It belongs to the heating device and several more fixtures.

Such bidet toileties have a stationary nozzle or a fitting, which is extended only before use. The second type is more convenient and hygienic.

Outdoor option

Outdoor toilet together with the bidet can be both expensive and budget.

Products at a price of $ 1,100 fed water to a certain temperature, blow part parts with a hairdryer. You can control processes using the DPU remote. Lower the seat smoothly help microlift.

Budget models cost from $ 200 are devoid of these "frills". In order for water to be heated, you need to connect the bidet to hot water pipes. If there is no such service in your apartment, you will have to be satisfied with cold.

Suspended bidet

They make it possible to save space in the toilet, simplify cleaning and improve the quality of hygienic procedures. Since the output sewer pipe is located above the floor level, so this plumbing is not so fast. Tacks of such toilet bowls are hidden from prying eyes for installation.

No need to be afraid that the device will fall under the severity of the seated owner. The suspension toilet bidet can withstand a load of up to 400 kg. This is facilitated by a robust metal frame on which it is attached.

To make it easier to connect the electronic part to the network, in some models there are converters.

Suspended toilet-bidets are increasingly popular with each day, the amount of their sales is constantly increasing.

Operating principle

Consider the toilet with the bidet together (the photos presented in the article clearly demonstrate this to the modern device), in which the water is heated by the electric heater.

Using the knob, the desired temperature is displayed, usually not higher than 40 degrees. By pressing the desired button, you will activate the tube. From the sprayer, which is at its end, is poured by a fountainic water. The degree of pressure can be adjusted and reach 7 modes.

Washing can be uniform, pulsating, vibrating.

Many models have a hairdryer.

Installation

It may vary depending on the type of toilet bowl - outdoor or wall.

Consider the toilet with the bidet together. How to connect it to the power grid?

The bowl itself is installed in the same way as the usual toilet. The main difficulty is the connection of the electrical heater to the network. After all, the incorrect connection can lead to the fact that during the procedure you can strike the current.

When connected, you need to follow these rules:

Ground installation is required.

Disables the device to achieve a certain level of differential current.

To the electric heater bidet, the wiring is carried out separately, without connecting to existing lines.

Alternatives to electronic bidet

Toilet bowls together with the budget bidet requires the installation of a single mixer, which will supply water with a separate tube.

Automatically controls the water temperature. It usually does not exceed 40 degrees. It is heated for 5 minutes. It is allowed using a lever that adjusts the pressure. Its watering can be replaced with a sprayer.

There is another alternative to the bidet. This is a separate soul tube installed directly near the toilet. The temperature there depends on the presence of hot water in the apartment.

Bidet cover

Get the toilet together with the bidet can be using a special cover. This is a separate device that produces three types: Round, short and long. This allows you to place it on the toilet of any size and shape. It often does not matter the manufacturer. The cover is put on the bezel to the toilet and performs the function of the bidet.

She may be:

mechanical;
electronic.

The first is connected to cold and hot water pipes, electricity. Inside, simple models (from 200 $) are equipped with appliances that adjust the temperature, tube. The main part is the mixer.

These devices are no worse than combined devices. A significant number of functions and a small boiler will make a bowl with a bidet together comfortable in use. The price of it, respectively, will be higher.

Such covers have a system for setting the temperature modes. You can add liquid soap into water. Many covers have a function of hydro and aeromassage.

The cover is smoothly closed using a microlift, the drain occurs automatically.

Ultraviolet rays of backlight disinfect air and working surfaces of the toilet.

The advantage of the lid is that it is not necessary to buy and install a new toilet.

Length departure

Models in which the fitting is not fixed inpatient, but it turns out during use, the length of its departure is distinguished. The degrees of adjustment of this parameter can also be up to seven.

It is possible to choose a pendulum mode. They can be used during medicinal procedures with herbs.

With the help of a toilet bowl, you can even put enemas.

Cleaning

Developers of new models take into account the need for constant cleaning surfaces. Modern toilet bidet can clean himself:

work surfaces;

nozzle;

cleans and refreshes air.

Buying one of the instruments described, you need to pay special attention to:

The quality of the mixer. It is he who turns out to be a weak link, because of which you have to repair or fully change the toilet together with the bidet.

The presence of a temperature sensor allows you to control and quickly change it. His absence can even lead to burns.

Water sprayer is better to take with a nozzle that is regulated. It will help customize the thickness of the jet of water and direct it in the right direction.

Pros and cons

With pluses are understandable. The toilet bidet saves the place, and the process of its use can be comfortable and enjoyable.

The disadvantage of this device is its low hygiene. After all, if you use the bidet immediately after using the toilet, to ensure the purity of the bowl will be problematic. Therefore, not everyone is solved to replace the full bidet to the combined device.

Rating

Among the popular brands of toilet bowl bidets can be called:

The small area of \u200b\u200btoilet rooms in standard apartments does not allow accommodation next to the aircraft bidet. In this regard, the main mass refuses this subject of plumbing. But there is an alternative version - a two-in-one toilet bidet. Combined models are common in Japan, Turkey, South Korea. Gradually, they conquer world popularity, increasingly meeting not only in hotels, but also in homes.

According to the appearance of the toilet, combined with the bidet, resembles a traditional toilet with a more elongated bowl and an enlarged tank. Its main feature is the presence of a system that allows you to wash the intimate parts of the body. For this, the device is equipped with special nozzles that can be placed directly on the rim of the bowl either on the fitting (nose) under the rim.

The device can be used in the toilet mode, simply merging the water from the tank, or activate the function of the bidet, clicking on the special button (lever). In this case, warm water under pressure will be supplied from the nozzles for the commission. If the toilet bidet "2 in 1" is equipped with a fitting, then in the on state it goes forward, and in the off - drives back, becoming one level with a rim.

On the photo combined together with the bidet toilet with the control panel

Unitaz-bidet functions

The characteristics of such a device as the toilet together with the bidet differ from different manufacturers. Functions and additional components that can possess this subject plumbing:

electric water heater;
thermostat - prevents fluid in nozzles with too low or high temperature;
water pressure regulator with multiple steps - allows you to configure the operation of the device depending on the preferences of each family member;
pendulator movement injectors to improve ablution;
adjustment of the length of the exit of the fitting;
hydromassage - water can be supplied in pulsation, vibration, waves;
hair dryer drying after a hygienic soul - this option makes it possible to abandon the use of paper, in addition, the air jet can be used for aeromassage;
microlift - needed for smooth automatic closure of the cover of the toilet;
inclusion of ventilation in case of toilet bowl;
the coating with silver ions, which repels the dirt and prevents the multiplication of the pathogenic flora;
automatic washing after closing the lid;
the tank for a disinfectant solution is served before the drain of water and the disinfecting nozzle and a bowl.

In addition, there are devices with automatic air flavors, infrared sensors of the presence of a person, musical players, and so on.

Using the toilet together with the bidet

Modern toilet-bidet "Two in one" is very easy to use . It is enough to sit on the toilet in a convenient position and activate the flow of warm water with a mixer, buttons, lever or remote control. In this case, you can use soap or an intimate hygiene agent. In the end, you should enable the option of the drying or apply the towel. It is important that all the necessary items are within reach of the toilet.

Note: Instead of a full-fledged toilet, you can buy a biden cover with nozzles, which is installed on the usual toilet. They are electronic - with heating elements, as well as ordinary - with a mixer.

Varieties of toilet bowls with bidet

There are several varieties of the two-in-one toilet bowls allocated for different features.

By type of fastening:

Floor toilet. The traditional model that is installed on the floor. It has simplicity of installation, but takes a lot of space.
Suspended toilet. The device is attached to the wall using a special installation. Withstands up to 400 kg of weight. His advantages - compactness, relief of the cleaning process, attractive appearance. Minus - the complexity of installation and repair, since all communications are "hiding" in the wall.

An example of a suspended toilet

By the method of heating water and control of nozzles:

Mechanical. The subject of plumbing connects to the water supply with hot and cold water. Management is carried out manually. The device has a minimal set of functions.
Electronic. The device is equipped with an electric heater, a thermostat, a hairdryer, water pressure control systems and so on. Control is carried out using the buttons on the panel or remote. The heater can work constantly or turn on at the time of use of the bidet.

By type of material:

Porcelain. Characterized by reliability, hygienicness (not formed) and high price.
Faience. They differ in porosity (dirt absorbed into the surface), not very high strength, but they are inexpensive.
From other materials (found rarely) - made of steel, plastic, glass, stone, cast iron.

Other classifications of toilet bidets:

in form - classic and angular toileties;
by type of release into the sewage system - with horizontal, vertical, oblique;
in the form of a flush - with circular, with straight;
by the number of tanks - with one, with several.

Price range

The actual price of the toilet bidet depends on the number of functions and the level of the manufacturer. Approximate range:

floor mechanical toilet bidet Vitra Grand (Turkey) - 6350 r.;
outdoor mechanical toilet bidet IDEAL STANDARD CONNECT (Belgium) - 18070 p.;
suspended mechanical toilet bidet BIEN HARMONY (Italy) with microlift and noise insulation - 27910 p.;
electronic suspended toilet Duravit Durastyle (Germany) with a hairdryer and remote control - 128770 p.;
electronic suspended toilet bidet Toto Neorest EW (Japan) with a complete set of functions - 421400 p.

Tip: Buy the toilet bidet better in a specialized store. It is important to carefully inspect the device and check the warranty documentation.

Advantages and disadvantages

Consider the advantages and disadvantages of such a plumbing subject, as a toilet with a bidet function, and user feedback will help.

Advantages:

the possibility of adopting an intimate soul;
the cost of the integrated device is lower than the toilet and bidet in the amount;
the function of water and / or air massage, which is especially useful in hemorrhoids and diseases of the genital organs;
savings on toilet paper (with a hairdryer);
maintaining the hygienic purity of the toilet due to the automatic use of a disinfectant solution;
it is convenient to use both elderly and people with disabilities;
some models make it possible to carry out therapeutic herbal baths and make enemas.

In addition, it is worth considering that the toilet bowl with the function of the bidet occupies a little space, and also allows you to more thoroughly clean the space around.

Disadvantages:

high price of multifunctional electronic models;
completeness of installation and repair.

Connection features

Fastening the toilet bidet to the floor and / or wall, as well as its sewage connection are standard procedures. But there are some features related to the supply of water to the nozzles.

The installation algorithm depends on how water is heated for ablution. Only cold water is served in the simplest mechanical models. Connection is carried out by attaching a flexible hose to the crane installed on the pipe. Ease of use of such devices is doubtful.

With manual adjustment of the water temperature, the toilet bidet is equipped with a mixer, one hose of which is connected to a cold water tube, and the other with hot. When using a bidet function, a person with a lever or valve picks up a comfortable temperature for itself.

If the toilet bidet is equipped with a heating element and a thermostat, it should be connected to a cold water pipe and an electrical network. It is necessary to take into account the need for a separate wiring branch. In addition, you should take care of the ground and the protective disconnection device. It is impossible to ignore safety standards, since when using the bidet, the person's direct contact occurs with the water medium.

Toilet bowls with bidet function - plumbing devices that increase the hygiene use of the toilet. The manifold of modern models allows you to choose a device suitable for style, functionality and price to different categories of consumers. The acquisition of a toilet bowl is most appropriate if there are elderly in the house, as well as family members with disabilities or various diseases of intimate organs.