Gate swing metal Casov. Dogs on the gate. Dogs for skipping gates

When the owner wishes to secure a plot or building under the garage from the penetration of intruders or unauthorized persons, he puts a massive gate. To enhance the protection, they can be equipped with darling, and the devices will create an additional obstacle to unauthorized invasion. Independent production of gravy - the task is simple.
Its features depend on the type of concrete mechanism.
Cans come:

Sliding;
Swivel;
Bolt.

For the manufacture of dodging with their own hands, which will protect the swollen gate, it will take a certain set of tools.

It includes:

Schwlerlers;
Cheeks;
Wooden bars;
Nails and bolts;
Strong cord.

Welding equipment and a drill with a drilling perforifying the metal surface will be used from electrical equipment.

Cool varieties for bivalve gates

Devices that we consider below are well suited for bivalve input groups. And each type of product the owner will be able to do at home.

"Barrbum" - the most common ledge for two-dimensional gates

"Turntish"

This type of coc is found at the gates of garages and various economic buildings, which close with the help of swinging double gates or doors (maybe they also manufactured with their own hands). "The turntable" is the most primitive device moving part that serves wooden bar.

Zatos "Turntushka" for two-dimensional gates

The parameters of this part are as follows.:

Length - not less than 1.5 m.
Thickness - from 5 to 10 cm.

Wooden beams will be held on chapellers. They are attached to the gate through a bolt, achieving complete motionlessness. The hole is drilled by a drill with a metal nozzle. If there is no drill, work is performed by the welding machine. One channel is fixed slightly above, the second is lower. The bar is fixed in the central part of the edge of the canvas opening inside. His rotation must occur counterclockwise.

"Barrier"

It is also easy to put this dawn on the swinging gate.

Zamov "Barrbum" Used from the street side of the gate

A timber or iron plate with a length of up to 60 cm is fixed by a bolt to the sash (1/3 of the edge).
Two channels are welded with a length of 10 cm. The width of the elements must match the bruus. When working with the plate, the channel is replaced with a cropped metal corner (the plate must be tightly embedded between the part and the sash).

If there is a desire to equip a "barrier" by the padlock, on the one hand, the plate under the constipation is welded. The second ring is attached to the sash .

"Sewingalet"

The model will become more functional when combined with vertical constipation. It makes it from the tube Ø 10 mm and more. The material is cut into 3 pieces with a length of one about 10 cm and two others - 5 cm.

Spivel is better to use together with vertical darling

The longest part is welded on the edge of the canvas horizontally. One 5-centimeter segment is welded along the edge opposite to the first tube. Next, they are inhabned in them, bent off from the T-shaped pin (for its manufacture, the rod in the diameter is selected so that it is without difficulty in the tube). The scoring is moved to the stop and the 3rd cut of the pipe is welded on its edge.

Fix constipation fastening a piece of metal plate under the handle. For the mounted lock, it includes an easy entry of the handle in the eyelets with loops .

Cans with a shut-off mechanism

This option is considered ideal for high iron gates. Made bosses with a shut-off mechanism as follows:

At the top of the box welded a piece of reinforcement with a diameter of 15 cm (the so-called finger). In the course of operation, another curved finger will be found for it, fixed by anchor rod.
Anchor rod itself is attached to a piece of suitable diameter pipe. Another piece is positioned below the central point. After fixing the rod, the bottom of the bottom tube is brewed, after which the anchor rotation is checked.
In the anchor rod, the hole is powered by a grinder and insert a calene iron plate, producing a bolt fixing. On the second canvas make a hook, for which when the gate is closed, a plate will be leaving.

Universal options for Casov

With lump and rope

For making with your own hands, such a downtime will need a leak with clamps located on the one hand. It is fixed to the door, sticking to an angle of 40 °.

Through the rings, they make a solid rope and leave its end in a safe place. The wicket opens at the moment when a man tweats for the lace. The owner of the courtyard this way of protection will have to do, but unauthorized persons can hardly get into the site.

Casov with beam and thawed

The tricky design consists of a bar that rotates on the round panel. Such a boss opens from the inside with the help of the handle. To enhance the reliability of the mechanism, you set the tape, open which will also work only from the inside. The interaction of the neck with the beam provides, slightly yelling its lower part of the form.

Slip Dawn

The goals of such a plan are easy to do for the gate, and for wicket. The principle of operation is the same. One metal plate with parameters 50 mm of width and about 40 cm of length takes place on the manufacture of the product. Subsequently, the item will "ride" back and forth on special grooves.

Pretty common design. Previously, such drones were made of wood, but now the widespread material - steel stripes

The grooves themselves are fixed by bolts or by welding. They insert a plate and for greater reliability provide an entrance group with vertical docks. This part of the structure is obtained from the pins of the M-shaped Ø 10 mm. To protect the garage gate, the emphasis is fixed at the top of the web so that when closing it it turns out to be fixed. In other cases where swaming gates are applied, two vertical stamps are equipped at the bottom.

Accessories are installed on any gate to perform their functions. For reliability, the lock is used, and for additional fixation of the skills on the gate. Currently, it is possible to acquire dumps that differ in principle. As a rule, the cost of these devices is not big. However, having some skills to work with tools and a bit of free time, make the goals on their own.

Cool varieties: their advantages and disadvantages

All modern deposits can be divided into two large groups:

vertical, which are perpendicular to the axis of the gate;
horizontal, located parallel to the axis of the gate.

Vertical boss for swing gates consists of two identical elements located on each sash. Vertical clamps can be located in the upper or bottom of the gate.

Each device is a small metal rod with a handle. Fixation is performed by lowering the device to the ground or concrete base (lower bonds) or raising in a retaliatory bar located on the top frame of the gate (the upper clamps).

The advantages of vertical clamp are:

high degree of reliability;
presentable appearance;
simplicity of manufacturing and editing.

Among the disadvantages, it is possible to note the impossibility of bonding the carrier films among themselves, which can lead to unauthorized discovery.

Horizontal deposits are divided into the following types:

casins turntable. Two metal or wooden planks are connected to the axis of rotation. The opening and closing of the device is made by rotating the "wings" of the device. Making a garage cassett-turntable is easy, the degree of reliability of such a device is quite low. Therefore, you can use the turntable only when departure for short time;

cans-barrier. A variety of turntables, in which the axis of rotation is located with the edge. The main advantages of the barrier are simplicity and reliability. If the goals to equip with eyeles, you can install a mounted lock on the device. However, even a small displacement (skewer) of the gate flaps will result in the inability of the device;

casov-Sewingalet. The most common device among consumers. The principle of action of the spinlet: the movable shut-off element located in the housing is included in the response bar. Spivens of different types and sizes can be made with your own hands or purchased in the store. The advantage of the device is the reliability and duration of use, and the disadvantage is the need for constant care.

You can also install more perfect deposits (electromechanical, code and so on) to the gate, but the cost of these devices does not always justify functionality.

How to make and install debool yourself

To make the Cassel for the garage gate or the gate of other purposes on their own, the following tools will be required:

drill;
bulgarian;
welding machine.

Production and installation of core of the turntable

Materials for the manufacture of therapy:

metal strip or profile tube;
large-sized bolt or metal rod for the manufacture of axis of rotation;
metal strips for clamps;
self-tapping screws for fixing the device to the goal.

How to make a goal for the gate? Manufacturing and installing the device are manufactured according to the following scheme:

a piece of appropriate size is cut off from the metal strip or profile tube;

In most cases, the length of the cut is half the length of the gate, but at the request of the wizard can make a larger or smaller device.

in the middle of the band, a hole is drilled to install the axis of rotation. The location of the axis for greater strength can be strengthened with a metal plate;

the hole is drilled in the goal sash at the place of the proposed installation of the device. Fix the Casov is recommended on the ribbiness;
metallic cut is temporarily fixed on the gate;
marking locations of fixing slats;
straps are cut from metal. Width of the slats should be slightly larger than the width of the main locking element;
planks are fixed;
a metallic cut is fixed, which performs the role of the turntable;
if necessary, one of the ends of the device is welded with arms for.

The bolt-barrier is manufactured by a similar scheme. Only the axis of rotation is located with the edge of the device and instead of two fixing elements are set, as a rule, three or four.

Production and installation of separ seas

For the manufacture of the device will be required:

two metal pipes. The diameter of one pipe must be 4 - 5 mm less than the diameter of the second pipe. Instead of round pipes, you can use profile;
metal plate or bar for fastening the device.

The process of making a spinlet is as follows:

two holes are drilled in a pipe of a larger diameter, which are located at a distance of 3 - 5 cm from each edge. It should be considered, the holes should not be through;
with the help of the grinder, a niche is formed connecting two holes;

When working, the grinder must be clearly followed by safety rules. Not only hands are protected, but also eyes.

at the edges of the pipe, approximately in the middle of the distance left, it makes transverse cuts about half of half;
the edges of the pipe are inflicted into the straight line and processed;
on the resulting "ears" drill holes for fixing the device;
on the pipe of the smaller diameter, the hole is drilled and fixed, which will bring the entire mechanism in motion;
the low tube is inserted into the prepared pipe of the larger diameter;
the finished device is fixed on a metal plate, which in turn is fixed on the door of the gate.

In more detail, the process of manufacturing the spinlet can be viewed on the video.

At your own will, you can make other types of goals. Schemes of various locking devices can be found on specialized sites.

There are many types of gate constipation, and each of them has its own characteristics. There is also a lot of ways to make the goal and install it on your own. The process of manufacturing a base is divided into several stages. On retractable designs from the professionalist, in addition to electronic locks, installation and latches are also made, and valves.

Cans for swinging flaps

Choosing a species of sampling

Types by fastening method:

Horizontal. Installation of such a basement is made in the upper zone or in the center, it is possible to make it at the bottom of the gate. The design resembles a large-sized tape. It consists of several parts: the outer shell, the loop of the retainer and the movable metal rod. This type is called "Sewingalet".
Vertical. Cans are similar to previous models are located in the same places. But they are moving at the expense of steel rods. They are often used in swing models. The photo is presented below.
Additional. The valve is installed directly on the gate and platband from the outside. This basement has average defense rates. Its installation is made in conjunction with other locks.

Designs with spring

Types of type of design

Bolt. This is the easiest type. He is often collecting with their own hands in a short period of time. Cans for swing gates have high strength rates. With a strong impact, they will not open.
Constipation on the eye. With his assembly, even unprofessional will cope, but it is easier to purchase a ready-made option. This model made of durable steel is manufactured. Such constipation is often installed on the garage doors.
Pin bump. It can be made from cropping of a metal pipe. For installation, it will be necessary to wear in the ground also pins. The constipation itself is made of two half-meter fittings.
Folded latch. It is made of 4 curved hooks and steel plates. The latch can be collected from the tree. This option looks great on the gate.

Barrier

Finished models

A pen. It can be spring and swivel. Design to collect with your own hands will be difficult. The constipation consists of several loops and a curved rod with a spring. It is installed on the wicket.
Patch lock. It itself consists of submersible and key design. They are locked using the key. CISA company produces various electromechanical locks, on the site you can choose the appropriate option.
Cutting lock with code. This type of locking mechanism is divided into magnetic and electromechanical. It is quite difficult to establish, but the design has high reliability indicators. The code lock is often installed on the gate of the warehouse.

Typical design for swing gates

When choosing a grade or electric hammer, you must pay attention to the weight of the gate.

You can buy and automatic constipation. Came is a company that sells them. All models correspond to GOST.

See also: Constipation for metal and wooden gates: swing and garage

Make constipation for swing gates with your own hands

Today there are several of the most common options for making and editing with their own hands.

Vertical constipation

Simple constipation

Step-by-step assembly instructions:

all items for assembling the mechanism can be bought in Lerua Merlin;
predefined drawing;
on the frame there is a point for placing the constipation, the location of its location in the ground and the length of the rod itself;
of several metal rods make two similar details. The length length is chosen so that it can keep the canvas of the input parts in the closed state;
in the upper zone of the gate, short pins are welded, they will facilitate the descent and lifting of the device;
in the soil pin is clogged with such a depth so that the object is protected.
recesses should be done using a garden bora, while the diametrical position relative to the rods is observed;
to the frame of the sash, you must attach a hook-hook with welding. It will execute the role of the handle for the lock device. With it, the mechanism is recorded after the design has opened.

Diagram of constipation

Bolt

There is an interesting way how to make a goal. He is going with the help of priest parts. Clamps for gates are collected from the beam and 4 trees from the tree. This design is manufactured in 1 hour. On the vertical stands, 2 profiles and handles made of wood are screwed.

In order for the design to be more durable and reliable, you need to insert a beam or a massive board. As a result, a mechanical locking mechanism should be obtained.

Casting drawing

There is another method, how to assemble the deposits on the gate with their own hands. For this use profile trimming and rental of square shape. Design or weld or install it on the bolts. To a calibrated twist, the length of which is 350 mm, you should spend the vertical handle. From the right edge at the same time retreating 200 mm.

See also: Shekold and gate on a gate with your own hands: Cans, constipation, photos and video

From a square profile, it is necessary to cut off 3 pieces, their length will be 100-200 mm. They must be attached to the plate with holes under the fasteners using welding.

The first two parts whose square tubes are fixed to the adjacent edges of the sash. Through them will pass the rod. He is banting the gate. In the 3rd part of the square profile, a free end for rolled products. It is used to stop the handle when the Casov will be opened. This option is used for the gate of the professional flooring.

Garage Square Scheme

There is another assembly method. In the upper zone, the reinforcement is welded, its diameter is 15 cm. There will be another curved element there, which is fixed using an anchor rod. At the same time, they are fixed on a piece of pipes of the required diameter. Another part is set slightly below the center. After fixing, the bottom of the bottom tube need to brew.

After installation, be sure to check whether the anchor rotates.

It should be cutting a hole with a grinder, into which the canylene iron plate is inserted. Fastening parts is performed using bolts. On the second canvas, you need to make a hook for which the plate in the closed door mode will go. Watch the video below about the installation of such a shut-off mechanism.

In the shop

Vertushka

Installation is produced in stages:

Pre-drawn the scheme for placing the mechanism. Then the metal latch is installed on top of the swing gate. She will rotate on a self-tapping screw. Its diameter will be 8-10 mm, and the hat should be hexagon. The upper latch is installed to increase the rigidity of the constipation and prevent deformation and twisting the sash themselves. It can be used as an additional stop.

Vertushka

The size of the bar is 4.5x10x200 cm. It can be steel or wooden, the thickness of the part is approximately 5 mm and more. Length must be chosen proportional to the width of the sash. Most often it is 2/3 of the width of the gate.

In the central part from the inside to one of the sash (left), a through bolt is mounted. Its circle is 10-12 mm. It is necessary to retreat from the edge of about 6-10 cm.
The bolt must be shuting without effort, and 2 washers are fixed on it.
On the canvase itself all width is installed grooves. It is used in its quality. The plank is fixed in it. The rancher is stepping with the help of a wedge, then the bar will get easily in the groove.
To another sash (right), the slaughter of the support is recorded. She will perform for a leaf of 10 mm.
Bolts located outside are also stepping, then they cannot be unscrewed. With this constipation, you can keep the sash in the closed state even in a strong wind. It is impossible to hack the design outside. Such a locking system is installed on the angry gate.

Shogrbaum scheme

An analogue of the "turntable" is a "barrier", it is manufactured from the same details. You can make it and electromagnetic.

With the beginning of the construction of the site, there are questions of the fence of their Earth and the house from the penetration of strangers. Together with the construction of the fence, it is necessary to decide how to make the goal on the gate reliable and convenient. If there is a gate, it puts a complex purchased lock opening from two sides.

Cans on the gate with an eye on the castle

It is enough to establish simple constipation from the inside to the gate. If you wish to protect the cottage, where there is no one for a long time, the deposits and clicks should be equipped with additional simple castles.

Buy goals in the store. Its price will vary depending on the model. But you can do it yourself.

Homemade bolovov designs are characterized by simplicity and low cost.

Usually, metal trimming, which remained after the construction of the fence, garage is used to create them. Conditionally, they can be divided into:

clamps;
valves;
dogs;
barriers.

All of them are reliable, but have one drawback - you can only open them from the inside. If you have access using cables outside, the availability of the opening of the constipation of constipation increases.

Such a goal will decorate any wooden gate

If it is necessary to open the gate outside, it is better to put a banging locking castle.

Pins and latches for sliding gates

How to make the goal on the skate gate. The effort when opening is directed horizontally. To fix the sash, it is enough to use a vertical pin.

Take a calibrated rod with a diameter of 10-12 mm. One end to bend it at right angles - it will be a handle. Second robbing on the cone and rounded.
On the metal plate to weld along the edges of 2 pieces of pipes up to 20 mm long. The inner diameter is selected with the calculation of the dense ride of the rod.
In the extreme position of the gate, note the point of touching the end of the pin and score a tube into the ground. In her, the bar must enter a depth of 50-70 mm.
On the pin, in the closed position, the point above the lower ring of the pipe and weld the pin to it parallel to the direction of the handle. On the plate to make limiters. In the closed position, they should not allow the rod climb up. When the gate is open, it is enough to turn the handle parallel to the canvas, and the retainer will delay the goals in the open position.

Suitable for retractable, and for swing gates

It is possible to increase the reliability of the vertical basement by the usual attachment lock. To do this, a handle is enough to heat the ring. The second loop under the lock to weld to the top of the plate with rings or directly to the frame profile of the gate. Calibrated rod reliably keep the gate from offset - opening. The lock will not allow a stranger to quickly open the lock.

The manufacture of dries on the gate with their own hands can be another design, more complex and beautiful. It all depends on the skill and desire to work with the metal.

Drawing for the manufacture of lower basement with their own hands

For the castle in the middle of the extreme rack of the retractable gate, you will need:

4 corners;
plate;
rivet;
the padlock;
8 screws.

From the tools you should cook:

drill;
screwdriver;
2 drills;
a hammer.

Little drill - diameter slightly more rivet thickness. They make a hole in 2 corners and on one side of the plate. A rivet is inserted into the hole so that the plate is between the corners, and the ends of the hammer are collapsed. When the hinges are screwed to the rack, the plate must be between them and rotate around the rivet.

The second end of the plate comes between the corners on the fence column. All 3 details are drilled under the diameter of the hanging castle and closed on it. To the profile, the corners are screwed by self-drawing. Outside the fastener is not visible, and it is impossible to unscrew it.

Popps for swing gates

Hinged lock will provide additional protection

Pins will ensure reliable fixation

In the closed state, the horizontal contributions holds the goal sash together and at the same time does not allow to raise the clamps.

Casov.

If there is a wooden beam and 4 door knobs on wooden and metal sash can be made in a few minutes. To do this, it is enough to fasten the door handles to the extreme vertical racks and 2 other profiles.

To get firmly and securely, the beam or thick massive board is pre-inserted into them. Door handles are screwed. After that, the board can be removed if you need to open the entrance to the courtyard.

Open such a goal is difficult. We must pull it out of all loops and keep in your hands. It is additionally desirable to put locks from the pins.

Make skills on the gate with your own hands can be made of profile and square or round rolled steel. The design can be welded or installed on the bolts.

Such a valve can be made more than a few minutes.

A perpendicular handle is welded to a calibrated rod with a length of 350 mm. The distance from the right edge is 200 mm.
3 pieces of a square profile are cut off with a length of 100-120 mm. Each is welded to the plate with holes for fasteners.
The first two plates with square tubes are attached on adjacent edges of the sash. Through them should pass the rod and lock. The third end is the free end of the rental. It serves as an emphasis for the handle in the open state.

Scheme valve from rod and square profile

Plates can be fastened or welded. If you need to close in addition on the lock, then one loop is made from the handle, the second is welded onto the second tube outside the connector. With the lock closed, the castle's closed in them.

Country scheme from pipe and rod

For the fence from the proflist and the same goal with their own hands made flat laws. The work takes from 5 mm thick. From it, the valve itself is cut in the form of a long plate with a curved edge. Rectangular loops are made: large - 60% of length, smaller - 30%. Thick metal is difficult to bend at home. Easier under the plates to substitute gaskets from the metal of the same thickness as the Casov.

Popps for gates usually buy, and for the gate do it yourself. What is the case? There are several reasons:

The gate uses more often, the mechanism should work as a clock. Can you do yourself?
Packs for gate always in sight. It should have a beautiful appearance and at the same time some secret opening mechanism or a conventional mortise or overhead lock.
Wickets are more or less standard and the choice of locking devices is sufficient to choose the appropriate.
The gate is more individual: sizes, materials, design. Popps are hiding. No one wants to open such wide access to your site or in the garage. Beauty goes into the background, the main thing is reliability and safety. Therefore, we and the masters of the deposits for the gate each in their own way. And what we choose the design is already a secret.

Varieties of gate constipation

Come up with absolutely new goal on the gate is difficult, and why? They are so enough:

"Turns". So called constipation with the axis of rotation in the middle. When you turn the "wings" of the turntable both sash. Simple temporary constipation, used when you are leaving for a while.
"Barriers". A variety of turntables, when the axis of rotation is located on the edge of the basement for the gate.
"Spinalets". Dogs on the gate of this type are most common. They can be purchased ready (beautiful and not very strong) or make with their own hands (powerful, but non-primable). Caps for the gate of this type are used not only for locking, but also for fixing the sash in the desired position. If necessary, the design of these three types can be supplemented with "ears" and hang the castle.
Constipation with fixation. This type is used to lock the doors from vans, truck sides.
Safety type shut-off mechanisms. When turning the handle of the sash attracts and fixed immediately in two places, on top and bottom.

Note that all the deposits on the gate are not intended for prying eyes, so the requirements of the appearance on them do not apply.

How to make a turntable?

For the manufacture of the turntables, you will not need welding, in this it plus. Drill, drill, bolt, iron strip or profile tube - that's all you need.

Scheme of zipper zone

We make a mark in the middle and drill a hole on the diameter of the bolt.
The same hole drill in one of the goal sesters.
If it is supposed to lock the goals on the lock, at the end of the band drills another hole and bend the eyelet for the castle. You can welcome it separately.
We temporarily screw the band to the bolt and place the position of the brackets where the constipation comes when you turn. One is located outdoor up, the other is down.
In one bracket, we provide a hole for the castle alignment. You can drill it after the assembly.
After the final assembly, it is desirable to make bolt heads non-removable. Bulgarian spire a face and slots from the outside of the gate.

Put the barrier on the gate

This type of constipation differs from the previous arrangement of the axis of rotation and brackets. The bolt hole is drilled on the edge of the strip, and the brackets (better than 3) are attached to the open part up on both sash. The longer the goals, the less the "luftyt" of the goal sash.

Barrier type constipation

A variety of "barrier" can be considered a rack from a bar for the entire width of the gate. On the support pillars, two brackets of the letter "P" weld, on the sash in the middle of the two open. By inserting the timber to all four brackets, we get reliably fixed gate flaps.

Propal burns do it yourself

Discover of this type is more popular and in the store you can find several different designs: flat, round, with springs. But they are easy to make with their own hands from the girlfriend. It is desirable to have:

Bulgarian.
Drill.
Welding machine.

Making valves start with a pair of pipe-rod. The rod (locking bar) must move freely in the pipe. Note that the pipe does not have to be round. The profile pipe 15x15 mm with a thickness of the walls of 2 mm includes a bar with a diameter of 10 mm. To enhance it, it can be inserted into the next size (20x20) pipe and brew edges. The wall thickness will become 4 mm - more than enough.

The easiest variant of the valve when they take three cuts of the pipe and the rod. Two segments are welded directly on the door sash, stick the rod and weld the bolt knob (like the window spinlet). The response part is fixed on another sash.

In a more complex embodiment, two pipe segments are boiled to the metal strip, the stroke limiters are added, a castle ears, sometimes a return spring. Then such a valve can be fastened to the tapping screws, bolts, weld to any goal.

By the same type, clamps are made for sash in extreme positions, only the segments of the pipes are welded vertically in the lower and top of the sash.

Constipation locks

Such constipation is difficult to call dorms. They are designed for tight locking of the gate and are used mainly in the garages. There is an opportunity to put two grains, at the top and bottom, which rarely happens on the gate of the fence.

The most common design is mined in spare parts for trucks and "Gazelles". Packs for the door of the van, for sides - the ready-made option. It remains only to attach it to your goal.

The principle of operation is simple, it can even be repeated independently. The fixed part sticks out the loop and attracts the sash. From the extreme position she herself can not jump out. For reliability, it is enough to hang a small castle.

Safe mechanism

Despite the Terrible name, it is also easy to make it. The principle of operation is similar to the previous one, but the constipation is combined into one. Still fixed "fingers" are captured with hooks, which are welded to the ends of a long rod. Locking occurs simultaneously and at the top and bottom.

The advice that will suit any type of constipation: two grayscale (at the top and bottom) much better fix the sash than one in the middle. This is especially true of the fence gate, which have no limiters on top.