Which is better - parquet board or parquet laminate? What is the difference between a parquet board and a parquet laminate? Differences between laminate, parquet board and parquet Disadvantages of parquet board

When a serious renovation is started in an apartment, the owner inevitably faces the question of choosing a floor covering, and most often this question is - which is better, parquet or laminate? Wood is the oldest building material, people have long appreciated its practicality, and over the last century they began to pay more and more attention to the environmental friendliness of wood. But before solving the dilemma, parquet or laminate - what to choose, of course, you need to understand the difference between their properties, compare the advantages and disadvantages.

Variety of types of wood flooring
Design differences
Price
Advantages and disadvantages of parquet and laminate
Mounting
Appearance
Exploitation

Variety of types of wood flooring

Mankind has invented quite a few floor coverings, the names of which contain the words "parquet" or "laminate":

laminated parquet;
parquet board;
laminated floor, etc.

So that the ignorant buyer does not get confused in this variety, we will describe the main ones.

“Laminate flooring”, “laminated parquet” and simply “laminate” are the same thing.

And the variety in the names is explained by the constant improvement of the manufacturing technology of this coating, the quality characteristics of which are constantly growing, and it itself looks more and more like natural parquet. That is, laminated parquet is the same laminate, but more reminiscent of natural dies.

As for parquet and parquet boards, these are completely different things:

Classic parquet is made exclusively of hardwoods. There are many types of parquet.
Parquet board appeared much later and is a material of glued wooden planks in several layers. At the beginning, the parquet board was made from the waste of the parquet production.

Design differences

Comparison of laminate and parquet should start with the general - both of these finishing materials are made of wood, and parquet consists entirely of it.

This is where the main difference between parquet and laminate lies, since other materials are used together with wood in the manufacture of the latter.

Moreover, while European manufacturers have 90-95% wood laminate, Chinese products may contain no more than half.

Laminate is like a layered cake: the main layer is made of wood fiber, similar in structure to plywood or fiberboard, and the other layers are artificial materials - paper and resins. The front side of the laminate is made of very strong and wear-resistant plastic, with which the product is laminated, hence its name. Under the layer of this transparent plastic there is also a film that has a pattern imitating the texture of wood - it is this film that determines the appearance of the laminate. The same technology is used to make low pressure laminates.

Video about the difference in manufacturing and performance of parquet and laminate:

Price

Listing the characteristics that demonstrate the difference between parquet and laminate, one cannot fail to note the price, which is several times higher for parquet than for any laminate.

The difference is noticeably influenced by both the type of wood and the quality of the laminate. The most expensive brands of laminate are not much cheaper than parquet. But if the buyer has enough money for an expensive laminate, then it is better to add a little more and buy parquet, which will have a number of advantages.

If the financial issue does not matter at all, then you definitely need to stop at a massive parquet board, and even better - on a block parquet.

Advantages and disadvantages of parquet and laminate

For the consumer, of course, there is no more important question, which of the materials will show itself better during operation.

The advantages of parquet

parquet flooring can be restored many times;
good thermal insulation makes the parquet floor warm;
good sound insulation;
durability (with high-quality installation, material and adequate operating conditions, the service life of the parquet will be tens of years);
hypoallergenic;
dust is not attracted to the tree.

Cons of parquet

dents and scratches easily appear on the parquet;
caring for parquet is troublesome and expensive - once every few years it needs to be sanded and varnished; moreover, this requires a special grinding tool and specialist skills;
the parquet restoration procedure is very lengthy (almost like a full-fledged repair) and is associated with the transfer of all the furniture.
very sensitive to fluctuations in humidity and temperature, which causes it to dry out, crack or swell;
high price.

Pros of laminate

the operation of the laminate is not associated with too troublesome caring for it;
with an average intensity of operation, the laminate can last for quite a long time - a couple of decades;
the cost is cheaper than parquet.

Cons of laminate

laminate is less durable than parquet;
it cannot be restored.

The general limitation for both parquet and laminate is that both of these coatings cannot be used in rooms with regular high humidity (bathrooms, kitchens), and this must be taken into account when cleaning parquet and laminate.

You should be aware that both coatings allow even daily wet cleaning, but the rag must be wrung out thoroughly, not allowing excess water to fall on the surface.

Video about the differences between parquet and laminate:

Mounting

As for the installation of these coatings, then in the case of laminate it looks much simpler. Inviting specialists for its installation will cost much less than laying block parquet.

Modern laminate flooring is a little more difficult than a children's designer, and no expensive and specific tools are required.

Special locks are made on the laminate strips, with the help of which they easily, smoothly and reliably adhere, and the final coating looks monolithic.

The advantage of laminate flooring in terms of installation time is also obvious, because the area of an average-sized room can be covered in one to two hours. If piece parquet is laid in the same room, it will take a day, or even two.

In this sense, the use of a parquet board can be a Solomon solution. The technology of its installation is closer to the installation of laminate than block parquet, which strongly resembles the assembly of a mosaic.

Appearance

There is no doubt that a well-maintained natural parquet will look much more refined and luxurious than a laminate. Although with the development of technology, not every consumer can distinguish a modern laminate from a parquet floor. It’s not for nothing that manufacturers have spent a lot of effort to model a wood pattern on a laminated board, which has already become almost indistinguishable from a natural one, therefore, in many cases, replacing parquet with a laminate can go unnoticed.

Traditional parquet is strongly associated in the imagination with the austere classic interiors of living quarters or ceremonial halls. Laminate flooring, on the other hand, can perfectly fit into both a classic interior and a modern one. This is facilitated by a huge variety of textures and shades that manufacturers have learned to give to laminate flooring.

Laminate can imitate not only the wood itself, but also tiles, marble, granite and a whole range of artificial and natural materials.

Exploitation

When comparing the behavior of parquet and laminate, it quickly becomes clear that the latter is colder and especially noisy, although the latter disadvantage can be dealt with quite successfully with sound-absorbing underlays. And if you connect it to the underfloor heating system, then this disadvantage will turn into an advantage - the heat will easily enter the room.

But the purchased high-quality laminate is not afraid of scratches from sharp ladies' heels or movable furniture, it will not fade in the sun and will not retain traces of indentation or static loads. Modern laminate is difficult to ignite and is quite moisture resistant.

When comparing the care of laminate and parquet, it should be borne in mind that the appearance of the latter is difficult to maintain if the owners like to often rearrange furniture, are used to walking around the house in heels, or have pets.

Wood is sensitive to indelicate external influences, and in the absence of careful handling, its surface is noticeably damaged.

Therefore, it is required to scrape natural parquet every few years in order to remove a thin damaged layer from it.

If the microclimate in the room changes, then the parquet begins to dry out and deform, which causes an unpleasant creak. A soft and hygroscopic tree does not like sudden changes in temperature. Lacquered parquet flooring can lose its environmental attractiveness, as toxic components can be released from the lacquer.

Neither parquet nor laminate can surpass each other in every characteristic, each has its own strengths and weaknesses. Therefore, the choice between these two floor coverings should be based on the financial capabilities of the buyer, operating conditions and the owner's willingness to regularly monitor the appearance of the coating.

What would you choose - parquet or laminate, and why? Share your thoughts in the comments and explain them - other readers will be interested!

Most flooring decors have a natural wood pattern, shade and texture. This does not mean that they are all wood products. In order to understand the variety of finishing materials, we will find out what is the difference between laminate and parquet board and parquet, and also compare their properties.

Laminate flooring belongs to the category of multi-layer floor coverings. As part of 4 base layers (top to bottom):

Overlay

Protective transparent film formed from high-strength polymer resins. The wear resistance of the finishing material largely depends on the thickness and hardness of this layer.

Overlay is not only a protector that prevents premature abrasion and damage to the coating. Special processing techniques have been developed, with the help of which various decorative effects are obtained:

mirror gloss,
silky matte satin,
semi-matt or semi-gloss textured embossing,
smooth matte surface, etc.

Depending on the strength of this layer, the laminate is assigned a load class - from 31 to 34.

Decorative layer

Formed from thick paper. The drawing chosen by the designer is applied to it by the method of high-precision printing. The most common decors are for floorboards or classic deck parquet. Stone, textile and avant-garde designs are less commonly used.

HDF carrier board

The basic element of the laminate. It is a rigid fabric made of fine-grained shavings pressed under high pressure and thermosetting synthetic resin. The degree of resistance of the coating to long-term loads depends on:

Density of the slab. Varies from 750 to 1200 kg / m 3;
Lamella thickness - from 6 to 14 mm.

Stabilization layer

It is a paper impregnated with melamine resins. Designed to protect the bottom of the laminate from moisture and prevent deformation of the boards.

Some specialists also distinguish the locking part in a separate layer, with the help of which the lamellas are connected in a glueless way into a single canvas, without gaps and drops. Almost all manufacturers produce laminate flooring with a click system of locks in the Click format. Due to this, the installation is carried out "floating".

To improve the moisture-resistant characteristics, the ends of the laminated coating (in some collections) are treated with special waterproofing compounds based on polymers or wax.

Thus, laminate flooring is a composite rigid flooring made up of dissimilar components.

Features of parquet boards

What is the difference between a parquet board and a laminate? There are some similarities between laminate and parquet flooring. Both materials are multilayer, but the second (decorative) coating is 98% wood. Structurally consists of:

Wear-resistant and stain-resistant topcoat... Used polyurethane, alkyd or acrylic varnish (glossy and matte), wax, a mixture of oils or oil-wax compositions.
Solid wood: oak, ash, jatoba and others. To give interesting tones, special processing techniques are used (toning, bleaching, smoking, brushing, etc.). The cut is quite thin - 2-6 mm, but at the same time, repeated grinding or scraping 1-4 times is allowed.
Carrier base with a section of 6-9 mm. For its manufacture, spliced coniferous timber of technical varieties is used. The fibers are arranged transversely to the top layer to exclude possible deformations (distortions, twisting, bending).
Bottom stabilizing layer... Its thickness does not exceed 1-3 mm. The layer is designed to compensate for the stress of the layers and ensure the stability of the geometric dimensions of the strips.

The parquet board is laid in a "floating" way, therefore each plank is equipped with a mechanical locking system of Click or Lock formats. However, there is a difference here: unlike a laminated floor, a prefabricated array can be fixed to the base using glue or fastening hardware.

Array characteristics

What is the difference between laminate and parquet? First of all, the fact that these are single-layer, planed from solid wood, planks. For their production, such species as oak, beech, ash, cherry, maple and many others are used. Edges, usually grooved, are connected according to the "groove-comb" principle. There are many laying technologies, most often the glue method is used. Less often - with the help of hardware, clamps or special fastening cords.

Since flooring is made from solid wood, its quality and performance depend on many factors:

Dimensions. The length of the products varies from 15 to 90 cm, the width is 3-12 cm, and the thickness is 15-25 mm. Small-format strips are considered the most resistant to changes in temperature and humidity.
Humidity. A more durable coating than parquet has not yet been invented from wood. And the key to such reliability is proper drying. The optimal indicator is from 4 to 10%.
Variety. The decorative effect depends on this indicator. The best and most beautiful parquet is made from extra and superior wood. The product is obtained with straight or wavy lines on the edges, an almost uniform textured surface, there are no defects and sapwood. Grades AB, B and C are distinguished by a more interesting pattern with many halftones, as well as the presence of knots, weak and fragile areas.

Do not confuse parquet with solid planks. The difference is primarily in size. Parquet planks are even visually small, while solid wood is lamellas up to 2 m long and up to 20 cm wide.

Let's note one more important feature. Parquet requires additional processing after installation and a protective surface finish. Sanding and varnishing are carried out, excluding contact of the coating with water, dirt and other negative factors. At the request of the customer, the master can cover the floor with a special oil or wax.

Similarities and differences: laminate and parquet, parquet board

It follows from the above that all three considered coverings differ significantly. For clarity, we will summarize all the characteristics in a single table.

Characteristic	Parquet	Parquet board	Laminate
Appearance	Characteristic color and texture of living wood, surface warm to the touch.	Presentable type of natural solid wood with a rather uniform texture. Tactilely pleasant, warm.	Excellent imitation of wood and stone textures, a wide selection of designs for parquet, board, stone, etc.
Wear resistance and service life	Depends on the type of topcoat. The floor under a layer of durable varnish lasts at least 50 years with intensive use	The service life of the finishing material with lacquer protection is up to 30 years. Board under oil or wax - no more than 10 years.	The warranty period for 31 classes - 10 years, 32 classes - up to 20 years, for 33-34 - 25-40 years.
Advantages	1) Low coefficient of sound, noise and thermal conductivity; 2) Maintainability; 3) Moisture resistance; 4) Restoration up to 12 times; 5) Over time, the color becomes more noble, acquiring honey shades; 6) Factory defects are corrected by grinding.	1) Simple installation and disassembly; 2) Moisture resistance; 3) Maintainability; 4) Restoration up to 4 times; 5) Gradually the hue changes towards saturation. 6) It is allowed to use some collections in commercial premises	1) Fast assembly and easy disassembly; 2) Moisture, and for some collections and water resistance; 3) Partial maintainability; 4) Used in rooms with increased loads.
disadvantages	1) Complex and expensive installation; 2) The need for varnishing or treatment with protective agents; 3) Contact with water is undesirable.	1) The protective wax or oil coating needs to be renewed every 3-5 years; 2) Afraid of water; 3) It is undesirable to use defective boards; 4) Waste during installation can reach 5% of the total.	1) Surface cold to the touch; 2) May build up static electricity from time to time; 3) Requires protection from furniture legs, rollers and abrasives; 4) A large amount of waste during installation; 5) Weak noise and heat insulation properties; 6) Fade over time.
Interaction with the "warm floors" system	Operation is allowed only with water heating systems	It is possible to combine with water, infrared and special systems such as Devicel Dry, etc. Standard electrical heating is not permitted
Care	Varnished coatings are easy to clean and maintain. With a floor covered with oil or wax, you need to be careful, it is advisable to purchase a series of care products.	It requires constant care and special chemistry based on waxes and polymer compositions.	Easy to clean and maintain. To remove stains and scratches, it is best to purchase a restoration kit in advance.
Cost, from	RUB 350 / m2	1400 rub / m2	RUB 300 / m2

Let's summarize:

Which is better to choose: parquet, laminate or parquet board? The answer lies on the surface: focus on your design preferences and financial capabilities. The most important thing is to choose a really high-quality product from well-known manufacturers.

Advice! If you need repairmen, there is a very convenient service for their selection. Just send in the form below a detailed description of the work that needs to be performed and you will receive offers with prices from construction teams and firms by mail. You can see reviews of each of them and photos with examples of work. It is FREE and non-binding.

The main material used in the manufacture of laminate is chipboard. Its use is due to the amazing combination of flexibility with strength, as well as light permeability, which allows the glue to penetrate deeply into the material. Laminate can be fastened in two ways: adhesive and without using it. In the first case, in addition to quick-step latches, there are additional areas for glue on the laminate leaves. When using glue, the floor gets additional moisture resistance. But floors without glue are easier to assemble, and just as easy to disassemble.

It should be noted that today, each consumer can choose a laminate for the design of their home.

Laminate classes: what are the differences?

Even laminated floors differ in their properties of sound insulation, endurance in relation to external influences: light, moisture, mechanical damage. There are four classes of laminate flooring that can be found at sellers:

The highest quality and strongest is considered to be class 33 laminate. A coating of this class can withstand contact with moisture for more than one hour. In addition, this type of laminate is considered the most resistant to any mechanical damage and other factors. Basically, this class of laminate is used in commercial and industrial premises where maximum strength is important.
Laminates 32 and 31 class are also very abrasion resistant and have a high degree of wear. Such laminates can also be in contact with water for a long time without harm to the coating itself. They are often used for commercial spaces such as conference rooms or offices.
But for use in residential buildings and apartments, laminated coatings of 23, 22 and 21 classes are mainly used.
In bedrooms and rooms with low traffic, the coating of the smallest class is used: 21.

In addition to indicating the class on packages with a laminated coating, some additional parameters are also indicated that characterize this particular type of laminate.

Often, on packs (packages), you can find two designations at the same time: "Class 32 according to AC-4". This is explained by the fact that European (not all) manufacturers denote wear resistance through the "AC" indicator.

Technical characteristics - "class", determines the strength of the base of the slab.

The higher the digital value, the denser (stronger) the base of the laminate board.

Designation "AC" - characterizes the load, namely on the top layer of the laminated coating. And wear resistance (abrasion) is one of the most important characteristics for the direct consumer (not to be confused with strength!).

Here, too, the higher the number, the more wear-resistant the surface of the laminate.

Surface classification

The variety of laminates presented by the manufacturer is surprising today. You can choose a laminate that mimics the pattern of wood, tiles or stone. You can also match the shade of the laminate floor to each interior. The modern manufacturer offers colors from the darkest to almost white.

He is also qualified according to the drawing:

Single-lane. This type is more often used for large rooms;
Two-way. As a result of the use of this type of laminate, visually the floor is very similar to a simple wooden floorboard;
Three-lane. It is used mainly for rooms where the area is not too large, which visually very much resembles a parquet floor.

Also, the surface of the laminating coating is glossy or with an imitation of treated wood.

Laminate by type of surface is classified as follows:

classic natural coating;
textured surface;
with a relief pattern;
artificially aged laminate;
glossy surface;
surface for oil.

The classic natural coating visually resembles wood, it even has small indentations like on a tree. On the other hand, surfaces with a texture or embossed pattern have more visible pores and a texture that mimics the rough processing of wood. The glossy finish is varnished. The choice of surface type should largely depend on the design of the home and the preferences of the owner.

Experts advise to follow certain rules to preserve the laminating coating in its original form:

use furniture with rubber wheels;
cover special rugs at the entrance;
use special compounds for cleaning laminated flooring;
if, nevertheless, a scratch has formed, then a construction pencil should be used;
complex stains should be removed with acetone, gasoline or alcohol.

In the construction market, the choice of flooring is extremely large: parquet and board, linoleum, polymer and PVC, ceramic tiles, cork, carpets and laminate. Each of them has its own characteristics, disadvantages and advantages. What is the difference between laminate flooring and other types of flooring, how to choose a suitable type of laminated parquet flooring? The correct answers to these questions determine how long and efficiently the chosen floor covering will serve, how beautiful the result of repair or construction will be.

Laminate board, by its decorative properties, can replace parquet, ceramics, marble and stone

What is laminate flooring?

The history of laminate flooring does not go back centuries, it was invented in the middle of the last century for furniture production, and already in the 80s they began to make boards for floor installation.

Important! Laminate board is created by pressing under high pressure and temperature multilayer fibreboard and paper.

Laminate in the office

Laminate board, by its decorative properties, can replace parquet, ceramics, marble and stone.

Whichever manufacturer produces laminate flooring, each board is a complex composite structure:

bottom layer of melamine to stabilize the entire board, hydro, heat and noise insulation, increase the strength of the geometry;
the basis is a strong fiberboard or chipboard, treated with resins that are safe for health, it is responsible for mechanical stress and shock absorption;
the third layer is added by manufacturers, depending on the class of the laminate, in order to further improve the quality of water resistance, noise insulation, impact resistance;
decorative layer of paper with imitation of texture and pattern;
the top layer of transparent acrylic or melamine resin protects the coating from fading, damage, sometimes corundum granules are added to the layer or treated with electron beams to increase wear resistance.

The base is a durable wood-fiber board or particle board, treated with resins that are safe for health

The edges of the boards are also treated with resins.

Dimensions of laminate boards

During construction work, it is also important that the laminate flooring also differs in its parameters, since there is no single standard size.

The boards are produced in lengths from 300 to 1845 mm. The most demanded length, convenient for installation - 1260-1380 mm.

The width varies from 90 to 330 mm, most often 185-195 mm are chosen.

On a note! The thickness depends on the number of layers, being 6-12 mm, 8 mm is the most common.

The laying process does not depend on the parameters of the board, but there are certain nuances:

short laminated boards are easier to lay;
it is better to imitate parquet with narrow boards, and ceramic tiles with wide ones.

Advantages of laminated parquet

Each type of flooring has its own positive properties, therefore, during repair or construction, it is necessary to determine which of them are important and which can be neglected.

Laminate is an environmentally friendly material that does not cause an allergic reaction

What is the difference between laminate flooring and other types of flooring, in addition to its complex structure:

high resistance to ultraviolet radiation, mechanical damage, pressure, abrasion;
tolerates high temperatures well, has a high degree of fire resistance;
is an environmentally friendly material, does not cause an allergic reaction;
easy to assemble;
has a universal application - from children's rooms to school offices;
laminate flooring mimics a variety of surfaces, so you can match any flooring look to match the rest of your interior design.

Laminate or parquet?

Since laminate flooring is very similar in appearance to a parquet board, but it costs an order of magnitude cheaper, you need to know how parquet differs from laminate, so as not to be deceived by unscrupulous sellers. Here are some of the differences:

Budget. High quality laminate flooring still costs a lot less than inexpensive parquet flooring.
Material properties. Both types of flooring equally have excellent wear resistance characteristics, but at the same time the parquet does not tolerate high humidity and sharp temperature fluctuations at all. In addition, sharp heels, rearrangement of furniture, active children's games, dogs' claws leave scratches on the parquet, which have to be removed with the help of cycling - an expensive event. What is the difference between laminate flooring - it does not require such a careful attitude towards itself as parquet!
Term of use. A parquet board will last at least 25 years, while a laminate board will last about 10.
Styling. Both materials can only be laid on a flat, dry surface, including a heating system. However, before installing the parquet floor, the boards must be kept for at least a day so that the humidity and temperature indicators equalize. The finishing stage of parquet laying, scraping, takes about 3 weeks. Laminate flooring is quick to assemble and ready to use right away.
Care. Laminate flooring does not require as complex maintenance as parquet flooring. For regular cleaning of parquet, you can use only special, rather expensive products, at the same time, the laminate can be washed with ordinary detergent solutions.

High quality laminate flooring costs much less than inexpensive parquet flooring

Understanding how laminate flooring differs from parquet board, it is easy to make a choice based on financial capabilities and required floor characteristics.

Laminate classification

In order for the laminated flooring to serve for a long time and to please the eye with its appearance, it is necessary to correctly calculate the level of loads that the floor will withstand, and then select a laminate of the appropriate class.

Laminate class 21 in the bedroom

The traditional system divides laminated boards into 7 classes, which are conventionally referred to as 2 types:

household,
commercial.

The classification starts at grade 21 and ends at grade 33. What is the difference between the laminate class? The lower the class, the lower the price and service life of the flooring.

Household grade laminate flooring consists of 3 groups:

Class 21. Guaranteed service life - about 2 years, so it is used in rooms with minimal stress, such as storerooms.
Class 22. It is used in bedrooms or offices, and in order to make the flooring less abraded, it is covered with carpets.
Class 23. Designed for 5 years of work. Used in living rooms, dining rooms, hallways.

Class 33 laminate in a restaurant

Much more often, including in residential premises, commercial grade laminated boards are used - from 31 to 34.

In premises with high traffic, such as conference rooms, offices, the laminated floor of group 31 serves for about 6 years, and in apartments and private houses - up to 10.

The most popular in our country are classes 32 and 33. What is the difference between class 32 laminate and 33:

the laminate floor of the 32nd class in the apartment will last more than 15 years, and the 33rd class - up to 25;
class 33 has increased strength, so it is used in shops, airports, restaurants and banks;
the price.

The most popular in our country are classes 32 and 33

Class 34 laminate is still being developed by manufacturers who promise super-resistance to wear and tear, as well as moisture, temperature and even chemical reagents.

Class 34 laminate is still being developed by manufacturers

Appearance

Laminated parquet has become so popular among consumers also because the buyer can purchase boards of almost any color, shade or design, choosing according to the style of the room.

Laminate in the living room

What do laminate flooring manufacturers offer:

the surface of the boards can be smooth or rough, roughly processed or artificially aged;
the boards can be embossed with the effects of different types of wood, reptile skin, stone, ceramic plates;
boards can have a glossy, matte, oil, and 3D texture.

When purchasing a laminated flooring, it should be borne in mind that the color of the laminate differs in a light and dark room.

When purchasing a laminated flooring, it should be borne in mind that the color of the laminate differs in a light and dark room. So, a light floor is an excellent background for a small room or apartment, which will look more spacious, and the colors of furniture and textiles will be brighter. If the room is dimly lit and the windows face north, any floor will appear darker.

Dark colored boards are more often used either in large spacious rooms or furnished with light furniture.

A light floor is a great backdrop for a small room or apartment.

The most important thing is proper care

What is the difference between laminate flooring and various types of flooring? Housewives love it, because such a floor is easy to put in order and keep clean. A vacuum cleaner and a damp (not wet!) Cloth are what you need for cleaning.

A vacuum cleaner and a damp (not wet!) Cloth are what you need for cleaning

You can use a vacuum cleaner to add shine to your laminated parquet floor, but steam cleaners are not suitable. increase temperature and humidity at the same time. Do not use abrasive or alkaline products when cleaning.

Stains from the surface of the laminate can be quickly removed:

fat or blood - with the help of ammonia or alcohol;
stains of unknown origin - acetone.

Advice! Small scratches are easily masked with special crayons.

Laminate is an excellent choice for those who want to get a high-quality floor covering for their money that will last for many years. Just choose the right one!