That gas boilers. Mandatory maintenance of gas equipment in a private house: documents, frequency and description of the procedure. What makes up a typical list of maintenance work

Modern gas boilers are quite complex technological equipment. With proper care and proper handling, the gas boiler will serve for a long time without any failures. However, even the most expensive and functional equipment has its resource, after which various kinds of malfunctions begin to appear.

Knowing the main causes of problems and the procedure for their elimination, you can repair your gas boiler with your own hands. This is a very painstaking, responsible, but in most cases relatively simple work.

First of all, it is necessary to establish, due to which any malfunctions may occur in the operation of gas heating boilers. A number of different factors can lead to problems.

Electricity

Modern gas boilers are equipped with various automation equipment. These devices, in turn, are powered by electricity. And, despite the fact that it is already the 21st century and systems for the use of alternative energy sources are being actively developed all over the world, the problem of the stability of power grids remains relevant for many regions, especially for remote villages and all kinds of holiday villages.

A sudden shutdown or a strong surge of electricity is one of the main enemies of any modern gas boiler.

To avoid all the associated troubles, buy a quality stabilizer in advance. Do not spare the money to buy this device - cheap models are of little use, so it is better to immediately allocate funds for the purchase of a good stabilizer from a well-known manufacturer. Be sure that in the event of a breakdown of automation, you will spend much more money on its repair and replacement.

Water

At home, wall models of gas boilers are often used. Such devices are simultaneously responsible for both space heating and hot water preparation.

The design of wall-mounted boilers includes a flow heat exchanger. Low-quality hard water with various inclusions is the main enemy of the gas boiler heat exchanger. At the same time, under the influence of low-quality water, the heat exchanger can fail in just one season.

To prevent such damage, install special filters. The best option is a complete water purification system. With it, your boiler will work as long as possible, and using purified water is much safer for health.

Mounting errors

Any knowledgeable person will tell you: the installation and piping of gas heating equipment should only be carried out by qualified specialists.

Even the slightest errors at the stages of installation and connection of equipment can lead to irreversible consequences. For example, improperly performed piping in the case of a cast-iron gas boiler with a power of more than 50 kW will cause the unit to simply crack at low temperatures.

Therefore, if you are not an experienced gasman, entrust the installation of the boiler to professionals - this way you will save yourself from many problems in the future.

Weather

Adverse atmospheric phenomena can also lead to the appearance of many different problems. In frosty winters, people turn on heating almost at full capacity. This leads to a significant decrease in pressure in the gas pipeline system. As a result, boilers cannot realize their full potential.

You will not be able to solve this problem on your own - you still cannot explain to your neighbors that they only aggravate the situation by their actions. As a solution to the problem, you can install an additional boiler that runs on a different fuel.

Is it worth it to repair the boiler yourself?

A modern gas boiler is a complex and potentially dangerous system. The main danger of such units is the risk of a gas explosion in case of improper handling of the equipment or untimely elimination of various problems.

Various types of automation are responsible for maintaining the operation of the gas boiler at an optimal level. An inexperienced user is often unable to understand its device. Therefore, to fix serious problems, it is better to immediately invite specialists.

On your own, you can try to eliminate only visible damage and various contaminants that led to the failure of the pipe, chimney and other parts of the boiler.

There are a number of typical problems, which in most cases can be dealt with on your own. Problems will also be listed, in the event of which you can only protect yourself before the arrival of a specialist.

If there is a distinct smell of gas or smoke in the room, immediately turn off the boiler and leave the room, opening it for ventilation.

Call in a specialist immediately. Trying to solve the problem of a gas leak on your own without the right skills is extremely dangerous and unwise.

Flame sensor failure

If the combustion sensor or the gas supply pipe is broken, turn off the boiler, close all gas valves and allow the unit to cool completely.

After some time, return to the room to check it for the smell of gas. If everything is in order with the draft, try turning on the boiler again. If there is no traction, call a repairman immediately.

Boiler overheating

Overheating is one of the most common problems of modern gas boilers. The reason for this may be a malfunction of the automation equipment or a clogged heat exchanger.

It is impossible to cope with the repair of automation without the appropriate knowledge.

You can clean the heat exchanger with your own hands. The most common materials for the manufacture of heat exchangers are copper and stainless steel. There are usually no problems with cleaning them, but still be extremely careful.

To clean the heat exchanger, simply remove it and clean it thoroughly with a wire brush. In the case of a copper heat exchanger, it is better to replace the brush with a metal sponge used for washing dishes.

Boost fan malfunctions

The problematic place of fans are their bearings. If the fan of your boiler has stopped developing the set number of revolutions, try to eliminate the malfunction as soon as possible.

To do this, remove the back of the fan, remove the stator and grease the bearings. Machine oil is fine for lubrication, but if possible, it is better to use a higher quality carbon compound with heat-resistant properties for this.

Also, an interturn short circuit can lead to problems with the fan. Only a specialist can cope with the elimination of this malfunction. Hand over the stator for repair to replace the winding, or immediately replace the faulty unit with a new device.

Chimney problems

Often, excessive clogging of the coaxial chimney leads to the appearance of various malfunctions in the operation of a gas heating boiler.

Remove the chimney and carefully clean all of its components from soot. So you will not only return the previous level of efficiency of the unit, but also significantly increase the efficiency of the boiler.

When installing gas equipment, any master will warn about the need for annual inspections. Some owners of private houses forget about these recommendations. In this case, it should be understood that gas equipment may pose some danger. The Complex of Ideas company is ready to offer cooperation on favorable terms. Our specialists are able not only to install or repair gas units, but also to carry out scheduled technical work and adjustment. Diagnostics of a wall-mounted gas boiler will avoid many problems during operation.

Maintenance of floor boiler

Any gas equipment should be operated with all precautions. The floor boiler, due to its technical characteristics, is able to heat rooms with a larger area. Therefore, periodic scheduled inspections are simply necessary for him. You can call the master directly to your home at any convenient time. It is better to conclude an agreement with our company - then we will leave according to a strictly planned schedule, so that you do not have to calculate the dates yourself.

Maintenance of a double-circuit boiler

Service maintenance is a prerequisite for the operation of any gas equipment. In private homes, automated systems are often installed that work from a natural resource. Double-circuit boilers are used for space heating and for heating water, so they require close attention. Just sign a contract and our masters will carry out all the necessary work themselves.

Maintenance of a single-circuit boiler

Domestic gas equipment should be treated with special attention. Single-circuit gas boilers are designed for continuous operation, therefore, special requirements are imposed on it. Some degree of wear is acceptable, but it is better not to take it to the extreme. Maintenance of the heating unit will help extend the life of the automated system in a country house. It is impossible to provide proper care on your own, so it is better to immediately conclude an agreement with a service company. "Complex of Ideas" offers you permanent cooperation on favorable terms. We guarantee the quality of the work performed.

Why is it necessary to contact specialized companies?

Gas is a dangerous substance. Therefore, all work with gas equipment is regulated by federal law. Safe conduct of work in this industry is very important. All work with gas equipment is directly or indirectly regulated by Mosoblgaz. A self-respecting service company trains personnel at the Mosoblgaz training facilities in the specialty “Locksmith of in-house gas equipment”.

For preventive maintenance and setting up a gas boiler, special devices and tools are required, which have a relatively high cost. From the foregoing, it follows that all work with gas equipment should be carried out by personnel of specialized firms - such as "Complex of Ideas".

Our company has been engaged in preventive maintenance of gas boilers for many years, the specialists are experienced and trained. Therefore, you will receive a high-quality service at a very affordable price, insuring yourself against unplanned expenses for eliminating accidents, and protecting your loved ones from abnormal operation of gas equipment.

What is the maintenance of gas boilers?

Maintenance of gas equipment is prescribed in the documentation for the supplied device. The installation and service instructions detail and spell out all the stages of technical measures.

Consider the maintenance steps using the Viessmann Viessmann 100 gas wall-mounted hot water boiler as an example.:

Checking the gas pressure in the supply line.
Checking the starting and working gas pressure.
Checking the photocurrent, ionization current.
Checking the burner control unit.
Checking the fuel pressure in the burner.
Checking the composition and temperature of the exhaust gases.
Check and, if necessary, replace the fuel filter.
Injector inspection.
Boiler efficiency check.
Inspection of the combustion chamber.
Inspection of sensors and thermostats of the boiler.
Inspection of automatic control of the heating circuit.
Inspection of the boiler safety group.
Inspection of the boiler safety group.
Igniter check.
Checking sensors and boiler automation.
Checking circulation pumps.
Checking mixing units.
Supply voltage measurement.
Checking gas shut-off valves.
Chimney draft measurement.
Cleaning mud filters.
Checking pressure in expansion vessels.

From this list of technical measures, it is quite obvious that a non-professional is unlikely to be able to complete them in full.

And ignoring maintenance will certainly lead not only to failures, but also to a reduction in the life of the device. Therefore, it is completely unprofitable to save on prevention. The cost of preventive work will be justified, transparent and minimal.

Boiler service

Gas boilers are systems that need to be looked after especially carefully. Even if you strictly follow the operating rules prescribed in the service book, it is better to protect your life. When concluding a service contract, our masters draw up a schedule for scheduled diagnostics. Heating equipment must be inspected at the end of the heating season and before it begins. Our staff will arrange a convenient time. If suspicions arise during the inspection, repairs are also carried out.

Boiler maintenance

Safe operation of heating and water heating equipment is impossible without inspections. Round-the-clock use of the units contributes to increased wear of parts. It is better to protect yourself in advance and prevent the occurrence of emergencies. Maintenance should only be carried out by professionals. The specialists of the Complex of Ideas company offer a comprehensive service for your private estates. After the conclusion of the contract, the first scheduled inspection will take place in six months.

Call! Write! Service "Complex of Ideas" will help you organize a comfortable life in a country house.

To solve your problem, you can call a specialist. Fill out the form, briefly describe your problem and we will call you back for a consultation.

We service all gas boilers, including

Prices for maintenance of gas boilers

Service Price
Departure of the engineer during working hours from 8:00 to 22:00
Within the small concrete ring 2000 rub.
Tariff when leaving the facility outside the small concrete ring, per km. round trip 30 rub.
Departure on public holidays×1.5
Departure outside working hours from 22:00 to 8:00 am×2
One-time gas boiler maintenance
Wall mounted (up to 49 kW) 4500 rub.
6000 rub.
8000 rub.
5500 rub.
6500 rub.
8500 rub.
6000 rub.
7000 rub.
Floor standing with forced draft burner (60-119 kW) 8000 rub.
Floor standing with forced draft burner (151-359 kW) 10000 rub.
Floor standing with forced draft burner (120-249 kW) negotiable
negotiable
Annual maintenance of the gas boiler (1 routine + 1 emergency exit)
Wall mounted (up to 49 kW) 13500 rub.
Wall / floor condensing (up to 60 kW) 15000 rub.
Wall / floor condensing (61-140 kW) 17000 rub.
Wall / floor condensing (151-359 kW) 19900 rub.
Floor standing with atmospheric burner (up to 59 kW) 14500 rub.
Floor standing with atmospheric burner (60-99 kW) 15500 rub.
Floor standing with atmospheric burner (100-150 kW) 17500 rub.
Floor standing with forced draft burner (up to 29 kW) 15000 rub.
Floor standing with forced draft burner (30-59 kW) 16000 rub.
Floor standing with forced draft burner (60-140 kW) 17000 rub.
Floor standing with forced draft burner (140-249 kW) 20000 rub.
Floor standing with forced draft burner (over 250 kW) negotiable
Adding a scheduled exit 5000 rub.
Adding an emergency exit 3000 rub.

Gas equipment carries a certain danger in the event of a malfunction. That is why scheduled inspections of boiler rooms should be carried out. Maintenance is carried out by special certified organizations. In this case, the inspection includes a visual assessment of the parts and, if necessary, their repair.

Everyone wants gas to last for many years. But its performance depends on many factors. Poor operation provokes rapid wear of parts or their breakdown.

You can prevent the problem by regular checks, which are possible for warranty and post-warranty service.

After the expiration of the warranty period, six months must pass before the first inspection. The frequency of such inspections and repairs is prescribed in the contract between the client and the representative of the organization. If problems occur between checks, contact the organization that will perform the repair upon request.

Service goals:

Control of automation parts;
Determining the correct functioning of the burner;
Checking the functionality of all parts.

Each goal has an impact on maintaining the quality of the instrument. In addition, special attention should be paid to gas supply and exhaust pipes. The condition of the ventilation and chimney should be assessed. It will also be necessary to perform certain tests to adjust the burners. The tightness of the joints is checked using a gas trap and a soap solution. All faults should be corrected here. When an element cannot be repaired, it is replaced.

Types of service maintenance of gas boilers during operation

In total, there are 3 types of service maintenance: routine, current and overhaul. The first type is carried out with a certain frequency. A schedule is made to be followed.

Scheduled maintenance tasks:

Maintain equipment performance by regular cleaning and lubrication.
Finding faults and fixing them. When replacing obsolete parts, serious emergencies can be foreseen.
Replacing items that are not designed to last. These include gaskets.

Routine repairs are performed when the system fails unexpectedly. Then call the master, who eliminates the breakdown. Major repairs are carried out periodically at a certain time, which is indicated in the schedule.

As a rule, major repairs are carried out every few years.

During the procedure, the most important elements of the boiler are changed or restored. A deep check is performed to detect problems. At the same time, tests are carried out to check the performance of the parts.

List: what is included in the maintenance of gas equipment

In the instruction manual you can find the requirements for servicing a gas boiler.

At the same time, the description of the work is quite detailed. To understand the need for such work, you should study the instructions in detail.

Maintenance operations:

Visual inspection of the boiler. The condition of the burner should be checked.
Certain parts of the system should be cleaned. These include ignition electrodes, fire sensors, retaining washer.
Air sensors should be purged.
Clean and, if necessary, replace filters.
Boiler elements that interact with fire should also be cleaned. It is important to clean the gas burner itself. In addition, the system needs to be adjusted.
Smoke must be removed from the chimney. But this operation is not included in the service, it should be ordered and paid separately.
The electrical component of the boiler is checked and repaired if necessary.
Adjustment of the gas burner and other elements. Its adjustment takes place after determining the composition of the combustion products.
Adjusting the operation of the boiler, if it is connected to the system.
Checking the security system. This is a mandatory event. The security group does not work all the time, so there is no opportunity to verify that it is working. But its correct work directly affects the safety of the whole family. The inspector creates a simulation of accidents, and checks the quality of the equipment.
Checking the tightness of the solenoid valve that blocks the gas supply.
Quality check of all gas supply connections. Elements should be assessed for corrosion and tightness.

When performing a major overhaul will be required. All operations should be done regularly. The life of the whole family depends on the quality of the equipment. Every detail must be correct.

Maintenance sequence for gas boilers

Scheduled maintenance consists of cleaning, checking and adjusting. Shut off the gas supply before work. After that, the system is given time to cool down. Next, the state of the system is assessed by the appearance of the parts. Checked documentation and warranty seal. Then pay attention to all elements of the system. Then proceed to cleaning, after cleaning the boiler.

Items that need to be removed and cleaned:

Support washer. Determines the location of the burner in relation to the heat exchanger.
Air sensor. Mixes air and gas.
Flame detector. Lets you know when traction is deteriorating.
ignition electrodes. The mixture of oxygen and gas is ignited.

Any metal, when exposed to burning and soot, deteriorates. During normal operation of the burner, the flame is blue. A yellow tint indicates the need to clean the equipment.

The burner is cleaned with a special brush. In this case, the event should be held regularly.

Checking automation is considered the most important part of the work, since life depends on the performance of automation. The security system includes a thermostat, gas valves and fittings, a controller, a pressure switch. The main thing is to determine the presence of problems in time.

Choosing a boiler service organization: the main rules

Not all boiler manufacturers have service centers. Special organizations receive a license for this, having the necessary equipment and specialists. Such a firm receives a certificate to perform a certain kind of work.

The service center masters must be trained at the boiler manufacturer's factory. So they get the necessary knowledge for work.

To find out the qualifications of specialists, you should familiarize yourself with the entire documentation of the company. At the same time, there are a number of recommendations that should be followed when choosing an organization. These rules will protect you from scammers.

The location of the company should be as close as possible. Ideally, this is the same city or at least a region. This will reduce the time for the arrival of specialists.
The organization must provide a certificate from the manufacturer.
It is required to draw up an agreement with a detailed description of all services and obligations of the parties.

You can find out about service centers on the website of the manufacturer of gas boilers. There should be a list of all organizations. This allows you to get a certain guarantee about the certification of organizations.

How gas boilers are serviced (video)

Gas heaters need constant monitoring. It is necessary to evaluate not only the appearance of the elements, but also to carry out certain checks on the quality of the system. Boilers can only be serviced by companies with certain certificates from the manufacturer. Technical support will help keep the equipment working.

Gas equipment of any brand requires regular maintenance, which can only be carried out by experienced specialists with specialized education. Our service center is an autonomous specialized division that compares favorably with the technical centers of trading companies, since its direct task is to service gas boilers and the possibility of urgent repairs if necessary.

The service provides a full package of relevant highly qualified services, including maintenance of auxiliary equipment. The development of modern technologies has led to the full and partial automation of heating systems using built-in digital control.

The desire of manufacturers to improve the operation of gas boilers with the latest technology necessitates highly qualified operators with sufficient knowledge in the field of program control of gas units. Our service engineers undergo scheduled training at academic sites of well-known manufacturers, in particular, Viessmann and Bosch Buderus. Further training of employees ensures timely updating of professional knowledge, which guarantees high-quality diagnostics and maintenance of the gas boiler, as well as repairs if necessary.

The knowledge and experience of the service masters must be supplemented by the presence of their own repair and technical base and tools that meet the latest technical capabilities. We can diagnose the operation of Baxi, Ferroli, Vaillant boilers, as well as any other manufacturers. Prompt maintenance of your gas boiler is ensured by the presence of our own fleet of vehicles, as well as a wide range of the most popular spare parts in the warehouses of the service center.

Why is it necessary to carry out regular maintenance of the boiler?

Intending to purchase a gas boiler for an autonomous heating system or being its owner, one cannot underestimate the vital importance of operations to ensure its normal performance. News feeds of TV channels often report explosions of gas equipment, the main reason for which is improper operation and failure to detect malfunctions. The slightest malfunctions or readings of boiler automation indicators, invisible to the layman's eye and not telling him anything, can tell a lot to a professional. Minor flaws in the operation of the system, seemingly invisible, can develop into a serious problem and, as a result, lead to system failure or create a life-threatening emergency. Timely maintenance of the gas boiler reduces all of the listed critical situations to the utmost minimum.

Gas boilers are classified as fire hazardous equipment. Daily operation and scheduled maintenance of the gas boiler require compliance with relevant standards and requirements. Along with ignition, carbon monoxide (CO), which is invisible to the eye, is also dangerous. During normal operation of a gas boiler, CO is a standard product of combustion, and in small volumes escaping through the chimney, it does not harm life and health.

A dangerous situation may arise in the following cases:

violation of the tightness of the chimney or the removal of exhaust natural gas;
due to the appearance of soot in the chamber, a decrease in the efficiency of fuel combustion.
misalignment of the boiler automation, and, as a result, increased / decreased gas / air content in the supplied combustible mixture.

It must be added that the occurrence of soot is a common situation for a working gas boiler, so regular maintenance of gas boilers includes cleaning the working surfaces of the burner and chamber, as well as the boiler body, if necessary.

In these or other situations, carbon monoxide can enter the boiler room. Violation of the efficient combustion of fuel leads to a significant increase in the amount of carbon monoxide emitted, which can lead to a life-threatening situation. Carbon monoxide is catastrophically toxic. A concentration of 0.1% of the volume of inhaled air can be fatal within an hour! The specialists of our service center are armed with gas analyzers that detect even the slightest leak of gas substances, including CO and CO2, methane and propane-butane. Timely diagnostics and maintenance of the gas boiler will prevent the situation from reaching an emergency state.

In addition to leak detection, cleaning of parts of the unit and adjustment of automation, our service will perform all the necessary diagnostic operations:

exhaust gas temperature analysis;
calculation of excess air coefficient;
measurement of water t° at inlet/outlet;
checking the water pressure parameter at the inlet/outlet;
comprehensive assessment of fuel consumption;
inspection of electrical circuits;
other operations.

In the event of failures that the maintenance of the heating gas boiler reveals, our specialists will provide recommendations for repairs and calculate an estimate. Repair work is carried out as soon as possible.

The legal side of the issue “Maintenance of a heating gas boiler” exposes the latter as an indispensable condition for maintaining the guarantee for the boiler. In addition, it is possible to obtain permission to install, connect to a gas pipeline and start up gas equipment only by concluding an agreement with an enterprise that has certificates and licenses for this type of work. Our service has all the necessary permits for the maintenance and repair of gas boilers and related equipment.

Remember: only a professional can ensure the safe and uninterrupted operation of a gas boiler!