Old bath in the country: unusual ideas for old things. Sofa from the bath Beautiful flower bed from the old bath

When a long-awaited major overhaul takes place in an apartment, many are driven by a single desire - to get rid of old things in the house as soon as possible, as a result of which most of them begin to safely move to the balcony, garage or dacha. When it comes to renovating the bathroom, the pressing question arises - what to do with the old cast-iron bathroom? For so many years it has served well that it is a pity to throw it away and to store such a heavy, large-sized attribute of plumbing, there is nowhere and there is no need. The ideas from this article will help solve this problem, showing how you can make the so-called upgrade and give new life to an old bath.

Small reservoirs and ponds always perfectly harmonize with the landscape design of the summer cottage. It is not difficult to build a small pond yourself if you have an old bathtub. Such a pond will look most natural if the bath is buried almost to the very edges in the ground. In the place where it is planned to organize a pond, it is necessary to make markings based on the size of the bath, dig a hole corresponding to its parameters. Next, plug the side and bottom drain holes with a wooden plug wrapped in cloth. It is better to paint the inside of the bathtub black so that the bottom of the bathtub does not shine with an unnatural whiteness. However, if you do not plan to periodically drain water from the pond and clean the surface of the bathtub, then after a certain amount of time the bath itself will take on a natural look due to adhering dirt, plant residues and insect waste products. And here are some more ways.

Around the pond, you can lay out stones, plant such plants as loosestrife, bells, iris, ferns, bergenia. You can also decorate the pond with lanterns and a variety of animal and bird figurines.

Cozy sofa for a summer residence from an old bath

With some effort and creativity, you can transform an old bathtub into a stylish and original sofa. It can be put both on the summer cottage itself and in the house. To implement this idea, it is necessary to outline a cut line on one of the sides of the bath and remove the excess part with a grinder. The edges should be smoothed and then painted outside and inside the bathtub in any color you like that suits the interior of the room. After painting on the cut edges, fix the edging. Decorative overlays should be glued to the legs with liquid nails. A mattress and pillows are placed on the bottom of the bathroom. The sofa is ready.

Beautiful flower bed from an old bath

Making an excellent flower bed from an old bathtub is easy. Plus, she's almost ready. You can bury the tub completely in the ground, as is the case with a pond, then cover it with earth and plant the plants. Or you can leave the bathtub on its legs, or dig only the legs into the ground. At the same time, the outside of the bath should be painted and you can even turn on all your imagination and paint the bath with beautiful patterns. Also, for the purpose of decoration, you can lay out a mosaic on the outside of the bathtub made of chipped tiles. And a few more ideas for your summer cottage.

Old bathtub as water storage for irrigation

Many summer residents use an old bathtub as a container for storing water in the country. But so that the old bathtub does not spoil the appearance of the summer cottage, you can easily build a funny cow out of it, as in the photo, which will give a smile and good mood to all family members and neighbors. Such an excellent cow can also be used as a mini pool for children.

In general, you can breathe new life into any old thing, translate it in a different form, use it for a different purpose. An old bathtub is an excellent material for creating truly amazing and most importantly functional decorative elements for a summer cottage, whether it be a picturesque flower bed, a quiet pond in thickets of plants, a stylish sofa, an original water storage tank or even a mini pool.

Elvira Goleva for website

When a long-awaited major overhaul takes place in an apartment, many are driven by a single desire - to get rid of old things in the house as soon as possible, as a result of which most of them begin to safely move to the balcony, garage or dacha. When it comes to renovating the bathroom, the pressing question arises - what to do with the old cast-iron bathroom? For so many years it has served well that it is a pity to throw it away and to store such a heavy, large-sized attribute of plumbing, there is nowhere and there is no need. The ideas from this article will help solve this problem, showing how you can make the so-called upgrade and give new life to an old bath.

Small reservoirs and ponds always perfectly harmonize with the landscape design of the summer cottage. It is not difficult to build a small pond yourself if you have an old bathtub. Such a pond will look most natural if the bath is buried almost to the very edges in the ground. In the place where it is planned to organize a pond, it is necessary to make markings based on the size of the bath, dig a hole corresponding to its parameters. Next, plug the side and bottom drain holes with a wooden plug wrapped in cloth. It is better to paint the inside of the bathtub black so that the bottom of the bathtub does not shine with an unnatural whiteness. However, if you do not plan to periodically drain water from the pond and clean the surface of the bathtub, then after a certain amount of time the bath itself will take on a natural look due to adhering dirt, plant residues and insect waste products. And here are other ways to make a pond in the country with your own hands.

Around the pond, you can lay out stones, plant such plants as loosestrife, bells, iris, ferns, bergenia. You can also decorate the pond with lanterns and a variety of animal and bird figurines.

Cozy sofa for a summer residence from an old bath

With some effort and creativity, you can transform an old bathtub into a stylish and original sofa. It can be put both on the summer cottage itself and in the house. To implement this idea, it is necessary to outline a cut line on one of the sides of the bath and remove the excess part with a grinder. The edges should be smoothed and then painted outside and inside the bathtub in any color you like that suits the interior of the room. After painting on the cut edges, fix the edging. Decorative overlays should be glued to the legs with liquid nails. A mattress and pillows are placed on the bottom of the bathroom. The sofa is ready.

Beautiful flower bed from an old bath

Making an excellent flower bed from an old bathtub is easy. Plus, she's almost ready. You can bury the tub completely in the ground, as is the case with a pond, then cover it with earth and plant the plants. Or you can leave the bathtub on its legs, or dig only the legs into the ground. At the same time, the outside of the bath should be painted and you can even turn on all your imagination and paint the bath with beautiful patterns. Also, for the purpose of decoration, you can lay out a mosaic on the outside of the bathtub made of chipped tiles. And a few more ideas for homemade flower beds from old things for your summer cottage.

Old bathtub as water storage for irrigation

Many summer residents use an old bathtub as a container for storing water in the country. But so that the old bathtub does not spoil the appearance of the summer cottage, you can easily build a funny cow out of it, as in the photo, which will give a smile and good mood to all family members and neighbors. Such an excellent cow can also be used as a mini pool for children.

An interesting idea for arranging a water storage

In general, you can breathe new life into any old thing, translate it in a different form, use it for a different purpose. An old bathtub is an excellent material for creating truly amazing and most importantly functional decorative elements for a summer cottage, whether it be a picturesque flower bed, a quiet pond in thickets of plants, a stylish sofa, an original water storage tank or even a mini pool.

Elvira Goleva for Decorwind.ru

If the old bathroom has served its time, do not rush to throw it into a landfill or scrapped it, you can make a rather original and creative sofa out of it with your own hands. Such a sofa can become a decoration of any home, from an apartment to a country house, and it will also fit well into the interior of various salons and service offices.

For the manufacture of such a sofa, an old cast-iron or metal bathtub is suitable, although it is better to give preference in favor of a cast-iron one, it has good stability and an original shape, especially if it is of an old model. Making a sofa from a bathtub is quite simple, all you need is an old bathtub, an angle grinder (grinder) with metal cut-off wheels and grinding attachments, enamel paints for painting the bathtub, and foam rubber with fabric for the seat and pillows.

Having removed the legs, we clean off the damaged and exfoliated areas of paint and enamel.

Having laid the bath, we draw the intended shape of the sofa frame on one side, it all depends on the wishes and our own fantasies. Cut lines can be straight, oblique, curved, semicircular, etc.

We cut out with a grinder and do not forget about personal protective equipment.

Having cut out the extra part of the bath, we grind the cutting line from the burr and make it more rounded. You can paint with any paints intended for a metal base, these are all kinds of enamels, nitro paints, aerosol paints and the like.

The legs in such bathrooms are self-tightening under the weight, they must be cleaned, painted and put into the groove inserts. In case of their absence, you can weld the necessary frame from pipes or squares and install in it, you can also make stands from stone or wooden beams.

Making a seat is a fairly simple job, we take foam rubber of a suitable thickness and cut out the required shape from it.

We wrap the cut out foam blank with padding polyester or spandbond.

Then we cover with a cloth, if possible and desired, you can sew a cover and insert foam rubber into it.

Pillows for the back and side armrests can be sewn on your own or purchased ready-made in the store, suitable in color and size.

Here you can see that the base of the seat is made of wooden planks, which in turn can be covered with a rug, bedspread or soft blanket.

In this version, the entire inner part is covered with foam rubber and a one-piece cover is sewn.

An overhead backrest and headrests will give this sofa a business look.

The right combination of colors and colors will give the sofas a unique glamor.

Having cut the bathtub in half, we get two original and rather comfortable armchairs that will become a spectacular addition to your sofa made from an old bathtub with your own hands.

Everyone knows that nowadays furniture has a very considerable cost. Moreover, this applies to absolutely everything, and sofas, and chairs, and shelves and everything else. Probably the only way to save money in this case is to buy furniture in bulk. Although, here it is also necessary to mention the self-production. They make furniture with their own hands, and there are a lot of ways to accomplish this task. Specifically in this guide, we presented you with a master class on making a small sofa from a bath.

What to cook

In order to make a sofa you will need the following:

Bath;
bath cutting tool;
felt-tip pen;
soft seat;
dye;
legs for a bath.

As for the tools, it all depends on what exactly the bath is made of. It's one thing if it's acrylic and quite another if it's cast iron. By the way, it will be much easier in the case of an acrylic product, a steel bath is a good option, but you will have to tinker with a cast-iron bath. Note also that cast iron products are always very heavy. Well, in general, here, of course, it's up to you to decide.

Making a sofa with your own hands

Initially, you need to modify the bath. The task is to remove one of the sidewalls, it must be cut out. For this purpose, depending on the material, you can use a grinder or autogen, acrylic can be cut, including with a jigsaw. The main thing is that the neckline is even. By the way, that's why you need to do the markup first. For this, you, in fact, need a marker. And yet, if the surface of the bathtub has stains and, in general, if it is not beautiful, you will need to fix it.

In any case, the edges of the cut must be rounded. When the cutting is done, you can install the legs. Note that they can be painted, however, like the body of the sofa.

As for the seat, you can do it yourself. You need to sew a small mattress. To do this, you will need foam rubber, synthetic winterizer, as well as dense and at the same time delicate fabric. Well, of course, you will need a sewing machine, as well as a needle, thread and a soft meter. First you need to cut the base out of padding polyester and foam rubber. Then you need to sew a cover onto this base. By the way, it will be nice if it is removable. You will need a zipper for this.

This is basically all. As you can see, the task is not very difficult. Every home master can cope with the creation of such a sofa. Well, as for materials, finding an old bathtub is now not difficult, as well as sewing a small mattress.

• Many have recently decided on a large-scale renovation in the bathroom, during which it is planned to replace the old bathtub.

If the old bathroom has served its time, do not rush to throw it into a landfill or scrapped it, you can make a rather original and creative sofa out of it with your own hands. Such a sofa can become a decoration of any home, from an apartment to a country house, and it will also fit well into the interior of various salons and service offices.

For the manufacture of such a sofa, an old cast-iron or metal bathtub is suitable, although it is better to give preference in favor of a cast-iron one, it has good stability and an original shape, especially if it is of an old model. Making a sofa from a bathtub is quite simple, all you need is an old bathtub, an angle grinder (grinder) with metal cut-off wheels and grinding attachments, enamel paints for painting the bathtub, and foam rubber with fabric for the seat and pillows.

Having removed the legs, we clean off the damaged and exfoliated areas of paint and enamel.

Having laid the bath, we draw the intended shape of the sofa frame on one side, it all depends on the wishes and our own fantasies. Cut lines can be straight, oblique, curved, semicircular, etc.

We cut out with a grinder and do not forget about personal protective equipment.

Having cut out the extra part of the bath, we grind the cutting line from the burr and make it more rounded. You can paint with any paints intended for a metal base, these are all kinds of enamels, nitro paints, aerosol paints and the like.

The legs in such bathrooms are self-tightening under the weight, they must be cleaned, painted and put into the groove inserts. In case of their absence, you can weld the necessary frame from pipes or squares and install in it, you can also make stands from stone or wooden beams.

Making a seat is a fairly simple job, we take foam rubber of a suitable thickness and cut out the required shape from it.

We wrap the cut out foam blank with padding polyester or spandbond.

Then we cover with a cloth, if possible and desired, you can sew a cover and insert foam rubber into it.

Pillows for the back and side armrests can be sewn on your own or purchased ready-made in the store, suitable in color and size.

Here you can see that the base of the seat is made of wooden planks, which in turn can be covered with a rug, bedspread or soft blanket.

In this version, the entire inner part is covered with foam rubber and a one-piece cover is sewn.

An overhead backrest and headrests will give this sofa a business look.

The right combination of colors and colors will give the sofas a unique glamor.

Having cut the bathtub in half, we get two original and rather comfortable armchairs, which will become a spectacular addition to your sofa, made from an old bathtub with your own hands. The requirements for the top casino rating in 2019 are here http://www.wowmagic.ru/kazino-zerkalo/top-rejting-onlajn-kazino/ How to choose the top casino?

Do it yourself

Do-it-yourself door upholstery
After a major overhaul, a lot of old building material remains in the house, including wooden doors. We offer one of the options for how to knock off the door with your own hands ...

How to make a sofa
Every person can make a sofa on their own, even with minimal skills in carpentry, just a little skill in using a construction tool and ...