Do-it-yourself manual snow scraper. How to make a shovel or snow scraper. Factory-Made Snow Blower Overview

In winter, snow drifts interfere with normal movement. As a result of snowfalls, the surface of yards and lawns is completely covered.

This reason should force us to take care of the timely elimination of snow, not only for the sake of order, but also for the safety of movement.

In order to prevent drifts, you need to clean the roads in a timely manner. Clearing snow is difficult and tedious work, but with convenient and efficient equipment the process can be greatly accelerated.

Currently, the domestic market offers a wide variety of winter equipment for snow removal. But we will tell you how to make different types of scrapers (scrapers) for cleaning snow with your own hands.

Manualsnow scraper

The peculiarity of the hand scraper is its easy use, as well as low material waste when creating a scraper.

The hand scraper is indispensable for cleaning areas of ice, but the runners will have to be pulled with difficulty on the sidewalk and ground. Therefore, a manual scraper is best done on wheels.

Let's consider the main stages of creating a manual snow scraper on wheels:

1.To create a scraper blade, we need a 27 cm diameter pipe, then cut a sector out of it. As a result, we get the required blade.

2. An unnecessary baby stroller comes in handy for creating a frame

3. We make stops using unnecessary water pipes. Create slots in the pipes from one side for the axle of the wheels, from the other - weld them to the scraper blade.

4. We take metal corners and create ears for fastening racks.

5. To control the height of the handle, make three holes in the upper part of the racks.

6. In order not to spoil the asphalt, a protective conveyor belt can be installed to the lower parts of the blade. We paint the scraper.

Result: the scraper is very easy to use, cleans snow quickly and conveniently. Thanks to the conveyor belt, asphalt and concrete surfaces are not scratched.

Snow scraper brush

The snow scraper is one of the most versatile tools. Its configuration can be different, the main thing is that it fits comfortably in the hand.

What to make a bristle for a brush. Often, an artificial bristle, similar to a thick fishing line, is used for the brush.

You can, of course, make a brush from natural bristles, but then you have to be generous financially. The hardness of the brush will depend on the task at hand.

The scraper, in terms of its mass, should not be heavy, otherwise the hands will quickly get tired. Therefore, when creating a scraper, pay attention to its mass, as this is one of the main characteristics.

Plastic snow scrapers

The advantage of a plastic scraper over the rest is that snow practically does not stick to it and it is much lighter in weight, so it is much easier to work with it.

The plastic scraper, like other types of scrapers, can be created in any size. A small scraper can only be used for ice, and a wide one can clear most of the area.

A plastic scraper is suitable for cleaning not only roads, but also roofs from snow.

Scraper metal for cleaning snow

Steps to create a metal snow scraper:

1. Take a metal sheet with a size of 1500 × 800 mm, a 3-meter tube for the handle, as well as 2 pieces of a metal corner, 1 m long for future runners.

2. Bend the ends of the runners and attach the handle. At a distance of a couple of millimeters in front of the racks, we install 2 pins, then attach a sheet to them.

3. Firmly install the top of the scraper using the clamps.

The clamps will help control the height and are capable of securing the side shield.

By the way, the scraper can be made foldable if there is a need to transport it in transport.

With the help of a special tool like a scraper, snow removal becomes better and faster.

A homemade snow scraper is not complicated in its design, and it will not be difficult to make it.

And also you can watch the snow scraper video

Selected for you:

Egor snow scraper? maybe a shovel?

Basil A shovel is made of metal, and a scraper is made of plastic or rubber, if you do not want to remove paint or other coating with snow.

Tags: How to make a scraper for cleaning snow with your own hands

Scraper, blade for clearing snow with your own hands.

6 Feb 2011 - 38 sec - Uploaded by fedormaevConvenient "Scraper drag" is designed for quick ... Making a snow scraper for cleaning snow with your own hands - Duration: 18:41.

11 Nov 2015 - 4 min - Uploaded by Want to do something good? Do it YOURSELF !!! In this video I tried to make a very budget snow scraper. Kitai nnada ... Scraper, blade for clearing snow with your own hands.

Please advise how and from what to make a scraper for cleaning snow on the street? | Topic author: Nikita

Vyacheslav I bought from the janitors and everything for a bubble

Ivan The janitors seem to have a sheet of tin attached to a stick with staples. Often rectangular.
The main thing is that the device is light, but durable.

Vladimir) My dad has a rectangular flat piece of wood, about like 2 sheets of A4 folded together, nailed to the handle from a simple shovel, it has been fucking cleansing the snow for five years now, well, sometimes the nails loosen and he clogs them again :-) It's easier to buy a ready-made one shovel, in my opinion they are not deficient!

Sergei Where are you from? that you haven't seen the shovels?

How to choose a scraper for cleaning snow in the country? - Landscape ...

30 Jan 2014 ... Description of the varieties of scrapers for cleaning snow in the garden and in the country, ... How to make a wood splitter with your own hands to save time and ...

How to make a snow scraper with your own hands | Build ...

March 10, 2014 ... You all see snow scrapers, how to make a snow scraper with your own hands, metal and plastic scrapers.

For some, the first snow, as well as any snowfall that happened within six months, is a reason to rejoice, play snowballs and make a snowman. And for some it is quite hard work, regularly consuming a lot of time. Yes, clearing snow with your own hands is not an easy task.

In some regions of our country, snow falls quite rarely and melts almost immediately. In others, in a week, and more than once, it may well pile up half a meter of snow. And in order to clear snow from your area near the house or at least the paths, you will have to stock up on the appropriate tools. Then snow removal at the dacha will take less time, and will turn from hard work into a good warm-up. Also, do not forget about the need for periodic

Otherwise, a lot of it can accumulate there, which threatens with unpleasant consequences both for you and for your cottage.

Of course, the most common tool is a snow shovel. It can be easily purchased at any tool or home improvement store. A large selection of modern models allows you to choose the right shovel for every person, regardless of his strength, height and skills. Shovels can be made of aluminum, plastic or thick plywood. Depending on this, they vary significantly in cost, convenience and durability.

For example, a wooden shovel is not only the lightest, but also the cheapest. Alas, the tree does not tolerate high humidity. Therefore, it is enough to make minor mistakes during storage so that the shovel just rotted away.

The aluminum shovel is the most expensive and the heaviest. But when working with it, you will be sure that you can easily remove the snow around the house and clean everything with your own hands without much difficulty. The most bitter frosts will not be able to harm a metal shovel. Accidental falls, strikes against stones hidden under the snow will also not cause the slightest harm to the instrument.

And finally, a plastic shovel. In terms of price and weight, it is the golden mean of choice. It is quite convenient to work, but when the temperature drops below -25 degrees, some types of plastic become brittle. As a result, normal yard cleaning may result in the breakage of the shovel. In addition, plastic, in general, does not tolerate impacts well. So no one can tell how long a shovel from it will last you.

Another popular hand tool is the snow scraper, or as it is more commonly referred to as simply the scraper. If you only need to shovel snow into a heap, for example, on the side of the road, on or on flower beds, then this is a great solution. A not too strong person can cope with such a tool, as well as one who is seriously tormented by back pain: the load on the body during work is minimal.

A serious plus is the ability to remove ice, into which water turns from melted snow on a warm day. But for this, it is better to take a metal scraper rather than a plastic one. It allows you to easily break ice off the path, and due to its greater weight, it is easier to enter deep snowdrifts. Yes, the cost of a metal scraper is higher than a plastic one. But it will serve you longer, and the ease of use fully pays for the additional costs.

The scrapers can vary considerably in width. There are very narrow ones, the main purpose of which is ice breaking and its removal. And there is a wide inventory: this is better suited for cleaning soft, fluffy and not yet packed snow. One person with a similar tool can easily clean up in an hour.

Read also

Construction of garden paths from scrap materials

How to make a snow shovel with your own hands

A snow shovel is relatively inexpensive today. But still, many people are interested in whether it is possible to make a shovel for cleaning snow yourself.

Of course, almost anyone who has the right materials, tools and at least a minimum of skills to work with them can design such a shovel. But in this case, you can only make a wooden shovel. For the manufacture of plastic or metal - you will need not only materials, but also special stamping equipment. So, to make a shovel with your own hands you will need:

You will also need a jigsaw or hacksaw, a plane, a hammer, pliers, a set of self-tapping screws, sandpaper, and a meter.

As already clear, a large sheet of plywood will serve as the basis for a shovel. It does not undergo any additional processing. But you will have to work with the bar. Equip yourself with a jigsaw and a plane to give it the desired shape: exactly matched the length of the plywood, one side should be completely flat and the other slightly rounded. For a better look, you can sand the block with sandpaper.

the picture shows the necessary materials to create a shovel

Now you can proceed to processing the cutting. Its length should be between 150 and 180 centimeters. The new shovel should be comfortable for you to work with, so proceed from your height and habits. The handle should also be sanded so that there are no protrusions and splinters, which are easy to injure during work. Make sure that there are no knots on the handle, otherwise it will fail much earlier than desired.

Connect the block to the plywood so that it fits with the rounded part. Place a long and thin strip of tin on top. Using self-tapping screws, connect all three parts into a single product. It is better to use at least 6-8 self-tapping screws, then the load on each of them will be minimal.

we connect a bar, plywood and a shank

Using a jigsaw, cut out a small semicircle on the block, corresponding in size to the handle, it should be half drowned. Align the bar with the shank so that the tip of the shank rests against the plywood approximately in the middle of the sheet. Remove the handle and saw off a piece of it at an angle so that it fits as tightly as possible to the plywood. Align them again and make sure the handle fits perfectly to the plywood. If not, repeat the procedure, increasing the angle.

The video shows the whole process of making a shovel for snow removal with your own hands.

When you have achieved the desired result, place a small piece of tin (3 x 2 cm) on the opposite side of the plywood. Connect the sheet metal, plywood and the handle with two self-tapping screws.

Turn the shovel over and place a 65 x 2 cm tin strip on the block. Secure with 4-6 self-tapping screws. Bend the overhanging edges carefully and tighten them on the sides of the bar.

It remains only to strengthen the front part of the plywood with tin, then the shovel will not crack when it hits the ice. Apply sheet metal to the plywood, wrap it on both sides so that it covers the shovel about 3-4 cm on each side. Gently pinch the sheet with pliers so that it fits snugly against the tree.

you can take the side cover from the old system unit like a piece of tin

That's all! The shovel is ready and you can start working with it.

Achievements of progress - to the masses

A few decades ago, a shovel with a motor was found only in jokes. But today the most amazing and strange things have firmly entered our lives. Therefore, everyone should know about such a cunning tool as an electric shovel.

Of course, this device does not look too much like a shovel. Rather, it has something in common with a conventional lawn mower. You need to hold the shovel by the handle, pressing slightly from above so that the propeller rakes in as much snow as possible. Trapped snow is thrown far to the side, where it will not cause unnecessary trouble.

Before buying, you should seriously consider whether you really need this tool. After all, its cost usually starts from 5 thousand rubles and can be much higher, which depends on the manufacturer and power. Therefore, it is worth making such a purchase in cases when it is necessary to regularly clear a plot of tens of square meters from snow. Then the electric shovel will help you save a lot of time and effort. A serious plus is the minimum expenditure of energy: you just walk around the site, slightly pressing on the shovel, and it does all the work for you.

Light weight - from 6 kilograms - makes it easy to work with the electric shovel for men, women, adults and adolescents. Of course, when working, you should take some care so as not to injure yourself on the powerful screw of the device.

Despite all the talk about global warming, winters in most regions of our country continue to be harsh, so there are often situations when heavy snowfall makes it difficult for vehicles and even the movement of passers-by in courtyards and streets. This issue is especially relevant for the owners of cottages or country houses, since they have to rely only on their own strength. Of course, you can buy a mini snowblower, but not everyone can afford it. In addition, sometimes its use is difficult and even impossible, so the snow scraper continues to be a popular tool.

How to choose

Today in stores you can find a variety of scrapers for cleaning sidewalks, courtyards and steps. They are mechanical and manual. If you are not ready for the big expenses, then you will need to purchase a manual scraper. It is often referred to in the English manner as a pusher or scraper, emphasizing the main purpose of this product - to push and scrape. Regardless of whether we are talking about a store product or deciding how to make a snow scraper with your own hands, it should be:

• easy;
• durable;
• having a comfortable non-slip handle made of a material with poor thermal conductivity, which will prevent the hands of the person performing cleaning from freezing.

From the above, it is clear that when choosing a snow scraper, it is better to pay attention to the options from plastic or aluminum, since they are durable and at the same time lightweight. In this case, the one who will be engaged in cleaning will get tired less, and the likelihood that the device will break down will be reduced to zero. In addition, it is desirable that the handle be covered with rubber to prevent slipping of the hands, and the height of the tool corresponds to the height of the person who will use it, since it is not particularly convenient to work in a hunched position.

DIY snow scraper (shovel type)

Everything that has been said regarding the choice of such devices in the store also applies to homemade tools for cleaning the yard or sidewalks. The easiest way to make a hand scraper is like a shovel. For its manufacture, you can use a regular aluminum sheet 40-50 cm in size, bent along the upper edge so that a side with a height of 4-5 cm is formed.You can also bend the side sides, and make the handle in the form of a frame, which is the case with a garden wheelbarrow.

Related Videos

Wooden scraper

To make a snow scraper with your own hands with pine board bumpers measuring 210x23x2.5 cm, you will also need a rail of the same material 280 long, 8 wide, and 2.5 cm thick.You will also need to use a sheet of galvanized iron with dimensions of 73 70 cm.

Instead of a rail, a round handle of an old shovel is also suitable as a handle for a scraper. Moreover, the width and length of the scraper can be taken different from those indicated, taking into account the fact that the device must freely pass through the gate.

The bottom of the scraper is made of an iron sheet, to which the sides cut from the board are attached with screws or self-tapping screws. Such a tool can also come in handy in the spring, since by adding wheels from a baby carriage and reinforcing the bottom with wooden slats, you can turn it into a light wheelbarrow for removing sawdust and debris. In this case, the wheel axle must be placed between 2 boards and secured on 2 sides with metal plates.

Scraper on wheels

It is always easier to roll than to drag. Guessing this, our distant ancestors invented wheels. They can also be used to make snow removal easier with a hand scraper. To manufacture such a modernized device, you will need a plastic or aluminum pipe with a diameter of 27 cm, from which you need to cut a sector with a side length 2-3 cm less than the circumference of the section. The result will be a part that will be used as a blade. As for the frame, an old baby stroller will come in handy to create it, which is likely to be found in any home where there are preschoolers or schoolchildren. You will also need to get old water pipes. Next, you need to perform the following operations:

• create slots in the pipes on one side for the axle of the wheels, and on the other, weld them to the blade;
• make ears for fastening racks from metal corners;
• make 3 holes in the upper part of the racks so that you can control the height of the handle;
• if you intend to use such a homemade scraper for cleaning snow on asphalt, then you can attach a protective conveyor belt to the lower edge of the blade;
• paint the scraper to protect the metal from corrosion and give the tool a finished presentable look.

Such a product will be a great helper, as it is convenient to use and does not scratch the road surface. In addition, it can be adjusted in height to suit the user.

Homemade snow scraper on skids: what you need

Wheels are not the only way to make the scraper travel easier. It will move easily if you place the blade on the runners.

To make such a useful device you will need:

• metal, preferably aluminum sheet 800 x 1500 mm;
• thin tube for the handle;
• two parts of a metal corner, each 1 m long, which will play the role of runners.

How to make a skid scraper

To make a scraper that slides freely on the snow, you need to:

• bend the ends of metal knots;
• attach a handle to them at a distance of 25-35 mm from the front end of the runners;
• stepping back 2 mm forward from the racks, install 2 pins;
• fix the scraper;
• install the top of the blade using clamps to help control the height of the unit.

If the snow scraper, the photo of the diagram of which is presented below, is intended for a summer residence and it may need to be transported by car, then the scraper can be made folding.

Motorized option

Cleaning the yard and streets in winter can be facilitated by making a snow scraper with your own hands based on a walk-behind tractor. To do this, you do not have to make any special efforts, since it is enough to attach to the bumper a snow plow blade made, for example, of a bent stainless steel sheet.

Making a manual snow scraper

You can also use a ready-made blade. You can also attach a snow blade to your bike by securing it below the handlebars.

Plywood scraper shovel

If a scraper is needed urgently and it is supposed to be used only for one season, then such a tool can be made in a couple of hours. To quickly make a snow scraper with your own hands, you need a sheet of dense plywood 50 by 50 cm in size, the surface of which should be treated with a moisture-repellent impregnation, and the edge with epoxy resin. It should be lined with aluminum on both sides to ensure ease of sliding. As for the handle, it needs to be made slightly shorter than that of conventional shovels, and the edge that was supposed to be attached to the scraper needs to be cut at an angle of 45 degrees. In order for the scraper to turn out to be reliable, you need to drill 6 mm holes in two places and install bolts and nuts. Next, the handle should be fixed with a wooden plank so as to increase the angle of attachment.

Now you know several ways to make a snow scraper and you can meet winter fully armed.

Comments (1)

Similar materials

Home comfort
DIY musical instruments: how and from what to make. Children's musical instruments with their own hands

Today, many are interested in how to make musical instruments with their own hands. Of course, to make a violin or piano without special training, materials, adaptations at home unprepared for this type of de ...

home and family
How and from what to make a vibrator at home

The time when the goods offered by intimate stores were considered something shameful and obscene is long gone.

Hobby
DIY apple costume: how and from what to make

Are you getting ready for the New Year's party? Looking for fancy dress ideas? Making an apple costume with your own hands is not difficult. They use various materials: both fabric and paper. If time permits, you can make ...

Home comfort
How and from what you can make a flower pot with your own hands

The article will tell you how you can make a flower pot with your own hands so that it matches the overall design solution of the home. In addition, the reader will learn how to make pots from improvised means without spending money ...

Home comfort
Hoods for barbecues and barbecues. How to make a cooker hood for a barbecue with your own hands? Do-it-yourself hood for a barbecue in a metal gazebo: drawing

Many are interested in how to make a cooker hood for a barbecue with their own hands. Before you start making the device, experts advise you to decide what type of oven you will use. For each type of su ...

Home comfort
How to make a toy box with your own hands: a master class and recommendations. DIY toy box out of the box

As a rule, we buy a lot of different toys for our children (dolls, toy cars, soft, educational, and so on). As a result, they are all scattered in different parts of the apartment. To prevent this from happening, we suggest you find out ...

Home comfort
How and from what is artificial snow made?

Artificial snow is perhaps the most indispensable item in ski resorts in the southern hemisphere. Thanks to the availability of special devices that produce such snow, it is possible to make ...

Food and drink
How and from what is ice cream made? How to make homemade ice cream?

In any country, ice cream is one of the most popular desserts. Almost all children adore it and many adults eat it with pleasure. What caused this love and what do people find so attractive in e ...

Business
Quail food: composition, rate, recipe and price. How to make food for quails with your own hands?

For many, their own private farm has become a symbol of their own vegetables and fruits, which allow them to diversify their table with fresh and organic products. Some breed chickens, geese and ducks to ...

home and family
How to make toys for a parrot with your own hands: a review of ideas, master classes and recommendations

Everyone who has a parrot knows firsthand how restless and inquisitive these motley birds are. That is why it is very important to come up with as many interesting activities for them as possible. If you don't, och ...

DIY snow scraper

• 1. DIY snow scraper

• 1.1. Wooden snow scraper
• 1.2. Metal snow scraper

Today, buying a snow scraper is not a problem, just like choosing a good snow blower.

Snow removal: a comparative review of snow removal equipment

Nevertheless, for those people who like to do everything with their own hands, making a snow scraper will not be difficult.

To make a simple, but at the same time reliable scraper, you will need a minimum of plumbing tools and the most common materials that can always be found in the garage.

So, this article will be devoted to how to make a snow scraper with your own hands.

DIY snow scraper

There are plenty of options for how you can make a snow scraper today. For these purposes, you can use both wood and sheet metal. If there is a piece of unnecessary metal pipe with a large diameter, then, as it turns out, it can also be used to make a scraper.

Wooden snow scraper

Making a snow scraper out of wood is as easy as shelling pears. This requires a piece of chipboard or other sturdy plywood. The dimensions of the future snow scraper do not need to be made too large, otherwise, removing wet sticky snow can become a real nightmare.

It is important to knock off one edge of the scraper, the one that will be working, with a piece of sheet metal, so that the scraper's sliding on the snow would not cause obstacles during work. The handles of a homemade scraper can be made from bars by attaching them with screws to the work surface.
So that during operation, the handles of the snow scraper do not loosen, it is important to strengthen them with sloping beams from a piece of not too thick board. This completes the process of making a homemade snow scraper.

Metal snow scraper

Making a snow scraper from a sheet metal bush requires a welding inverter and skills to work with it. Of course, you can also assemble the snow scraper on a threaded connection using long bolts with nuts and wide washers.

But it is still better to assemble the snow scraper by welding, since in this case it will turn out to be as strong and stable as possible during operation. In general, making a metal snow scraper is no different from assembling a wooden scraper.

There is another option for making a snow scraper from a piece of large diameter metal pipe. To do this, the pipe must be cut lengthwise into two parts. One of the parts that will be used is secured with clamps on a two-wheeled car, as in the pictures above.

If there is no piece of pipe, then the scraper can also be made from a sheet of thick sheet metal, having previously bent it into a semicircular shape. In this case, the scraper should be attached to the wheelbarrow by means of long bolts, having previously drilled through holes in the wheelbarrow body for this.

It would seem that what could be simpler than a snow shovel, however, this simple tool can also be improved with your own hands and make a snow shovel comfortable, functional, and most importantly, significantly reduce the load on the back when removing snow.

A large and level space - yards, entrances to the gates and just plain, it is most convenient to clear it with a snow shovel with a wide working surface in order to capture as much snow as possible at a time.

At the same time, the more snow there is on the shovel, the greater the load on the back and arms when throwing. Well, why not adapt ... wheels to such a scraper!

The long, comfortable handle allows you to keep the body straight, and the wheels to lift the collected snow to the right place. Perhaps similar know-how and you can buy it somewhere, but assembling it yourself is also not a problem. It is enough just to weld the axles for the wheels to the handles, and set the position of the shovel blade at a convenient angle, in the manner of a bulldozer bucket.

If suddenly the paths are not even and winding, and the snow needs to be transported over an impressive distance, the option of a snow shovel with one wheel will help out. The same wheel provides additional leverage when lifting the snow mass.

Shovels with a handle on a handle

Don't want to mess with the wheels? - A simple removable handle (if attached with clamps like a clamp, you can adjust the height according to your height), the handle on the shovel handle will significantly reduce the load on the back and arms when throwing snow.

A removable handle can also be in this version - 2 rings with free movement are put on the handle, and a strip from the handle is inserted into their gaps at the desired height, this increases the "lever" when throwing snow.

Modifying the shovel handle

Telescopic handle - allows you to adjust the length of the shovel to the height of the person.

A similarly curved handle also reduces the strain on the back.

If you are left-handed or need to clear snow out of a hard-to-reach place, the pivot mechanism on the handle will allow it to bend the right degree in both directions.

Car Snow Shovel

The rotary mechanism for attaching the blade to the handle will help you use the shovel both in the usual version and as a sump device, and complete with a telescopic handle and convenient, compact transportation even in a small car trunk.

Removing snow from the roof

Such a device will make it much easier for you to clear snow on roofs. You no longer need to stretch and balance to scoop up snow on the roof with an ordinary shovel.

This device, on the contrary, should be pushed away from you, pressing the lower plank with a dense synthetic canvas against the roof slope. The snow itself will roll down the canvas.

It is quite possible to build such simple snow shovels with your own hands and prevent various back injuries and stretching of the muscles of the hands when clearing snow.

Miracle shovel for digging the earth video

site Ideas for giving