How to cut plywood crafts with a jigsaw - simple drawings for beginners. Miracle jigsaw for sawing Sawing drawings for children

The art of sawing with a jigsaw has been familiar to many since school. Anyone can master such an activity, regardless of artistic ability, and this is probably his main advantage.

In addition, having mastered some skills with a jigsaw, you can create simply magnificent carved decorations that will serve to decorate the interior of the premises or the facade of the house.

Jigsaw sawing: tools

The first thing you need to cut out figures from plywood with your own hands is a jigsaw.

Such a tool on the domestic market is presented quite extensively and in several main forms:

• Manual. A tool familiar to many from the lessons of labor at school. As the name suggests, all sawing work will need to be done manually. The best choice for creating small gizmos or teaching children the skills of this exciting process;
• Electric. It works much faster than a manual one, but at the same time, it has a significant weight (1-3 kg), and therefore it is rather inconvenient to keep it "on weight". Yes, and it will not be possible to create a thin pattern, since the saw blade is too large for such jewelry work;

Advice. If the choice fell on an electric tool, then all the work must be done very carefully, otherwise you can get an uneven cut line.
Children should not be trusted at all to work with such a tool, because the probability of injury is high.

• Stationary. The only drawback of such a tool is its price - it is much higher than that of an electric or manual device. Nevertheless, the device is very convenient for the cutter, it does not need to be held on weight, and the cutting line, although it will turn out to be rougher than that of a manual "colleague", but still the speed of work is several times higher.

The choice of one or another tool for creating various structures from wood raw materials depends only on the amount of work and personal preferences of the master himself. If, for example, working with a jigsaw on plywood is just a hobby, then a hand tool will be enough.

Advice: If such an activity brings money and is put on stream, then you simply cannot do without an electric or stationary "assistant".

Preparation of raw materials and stencils

For those people who have skillful hands and extensive experience with the tool, cutting out of plywood with a jigsaw will not be difficult. To begin with, you will need to take a piece of material on which the drawing will be applied, sand it to a smooth surface with fine sandpaper.

After such preparation, it will be enough to apply the desired drawing and start the process itself.

All that needs to be done after downloading the drawing is to print it, transfer it to the sheet (first you need to prepare it with sandpaper) and start working with the tool along the contour.

Wood sawing process: features

The very process of creating decorative wood pieces is even simpler than drawing a pattern onto a sheet of material. It is enough just to first insert the file into the previously made hole (for this you can use a hand brace or an electric drill) and start working along the drawn contour.

Moreover, if the work is performed with a hand tool, then all movements must be smooth, without jerking, otherwise you can simply break the fragile jigsaw file.

If everything is done correctly, then in the end you can get a uniquely beautiful drawing, transferred exactly to the material, a detail that can advantageously decorate any room or building facade.

Additional finishing

To make a product created from a sheet of material using a jigsaw look even more beautiful and original, it can be additionally finished. To begin with, you should sand all surfaces with sandpaper, eliminating all small irregularities and roughness.

After that, you can varnish or stain the entire surface of the plywood product, cover it with paint or other finishing materials.

It should be noted that cutting with a jigsaw from plywood allows you to get not only solid, but also prefabricated structures. In the latter case, the final finishing will also be accompanied by the joining of several elements together using special glue or tattered nails.

The main thing in the process of creating a prefabricated product from several parts, even in the process of work, is to pay special attention to the cutting line, it should be located so that the notch is slightly smaller than always.

Tip: Several plywood parts cut with a jigsaw, after finishing work with the tool, it is important to "fit" and properly sanded with sandpaper.
Only in this case it is possible to guarantee the high quality of the surface and the most attractive appearance of the finished product.

Output

There is nothing complicated in the process of creating figures from plywood - you just need to pick up a jigsaw, prepare the material and get started. In the video presented in this article, you will find additional information on this topic.

Similar materials

Crafts made by the craftsmen with a jigsaw look elegant and stylish. In skillful hands, an ordinary tool turns into a miracle jigsaw, with the help of which incredible masterpieces are created. Artistic sawing can be just a hobby or a professional activity, because handicrafts are always appreciated. The features of the miracle of the jigsaw and the procedure for performing interesting crafts will be discussed further.

Characteristic features of the jigsaw

The miracle jigsaw provides convenient cutting of lines on a wooden base, this is facilitated by a narrow cutting blade. For woodworking, a band saw is more useful, but cutting out of plywood is better obtained as a miracle with a jigsaw. The main advantages of the tool are as follows:

• Accurate cutting of parts, the cut line comes out quite smooth, which does not require grinding.
• Due to the presence of a narrow blade in the miracle jigsaw, cutting of sharp corners and small parts is available.
• Internal grooving starts from the hole prepared with drill # 3.

Regarding the technical characteristics of the miracle of the jigsaw, the following features are noted:

• Easy tensioning and fixing of the blade.
• Sawing is much easier than using a band saw.
• Sawing out a miracle with a jigsaw practically does not pose a threat of injury.
• The tool does not require frequent adjustments.

There are several parameters that you should be guided by when choosing a miracle jigsaw for cutting:

• The main thing is the capacity, this indicator indicates the size between the back wall and the cutting blade. There are miracle jigsaws with sizes ranging from 12 to 26 inches.
• The thickness of the material that the tool is capable of processing.
• Number of moves in 1 minute.
• Saw stroke height.

To cut out complex elements from plywood in a miracle jigsaw, two types of saws made of steel are used.

Advice! For beginners, it is best to train on a thick-toothed plywood blade. It is also used to make cutting boards. Small teeth on a thin file allow you to cut out filigree elements of crafts from thin plywood.

The result of the work of a top-class professional is shown in the photo:

Preparatory steps

Sawing a miracle with a jigsaw requires painstaking work from the master, develops perseverance and patience. Initially, you should take care of the organization of the workplace. Prerequisites for comfortable work are high-quality ventilation and lighting. A private house provides more options for choosing a utility room; a glazed balcony is suitable in a city apartment.

The second important step is the acquisition of material. High-quality plywood reduces the risk of delamination of the part or the appearance of cracks when cutting a miracle with a jigsaw. The second reason for the violation of the integrity of the material is an incorrectly selected canvas or unprofessional actions. For cutting out crafts, plywood with a thickness of 3-4 mm is intended. The following steps can help prevent delamination:

• Depending on the area of ​​the surface to be treated, dilute the required volume of the mixture of water and PVA glue. For small areas, 2 tablespoons of water and a few drops of glue are sufficient.
• After thorough mixing, the solution is applied with a brush to the back wall of the plywood blank in 2-3 layers.
• The material is left to dry completely.

Comment! The glue solution will successfully replace furniture or parquet varnish.

Before cutting the miracle with a jigsaw, you need to clean the plywood. Chips, microscopic cracks, dark traces of knots are removed with sandpaper of various grain sizes. To give the surface the maximum smoothness is facilitated by stripping the plywood against the fibers. First, work with medium-grain paper, the final touches are applied with fine-grained sandpaper. The complete absence of burrs allows you to go to the main stages of work.

A simple example of a craft for beginners is presented below:

Craft making process

Preparing a drawing, sawing a miracle with a jigsaw, assembling parts and decorative finishing are key steps in creating original crafts.

Drawing translation

A well-executed drawing will provide a quick assembly of ready-made elements into a single figure. Otherwise, after painstaking work, a miracle with a jigsaw is at risk of encountering the problem of mismatching grooves and the need to rework individual parts. Drawings of crafts can be taken from this article or try to create a unique pattern for cutting. After printing or drawing on paper, the drawing is transferred to plywood in one of the most convenient ways. In the first case, the drawing is fixed with buttons on the plywood and copied using a pen and a ruler.

For cutting out crafts a miracle with a jigsaw, the technology of thermal transfer of toner from paper to plywood can be useful:

• Selects media with a low toner retention rate (such as glossy paper).
• In the printer settings, high-quality printing is selected to get more toner. The procedure for cutting out a miracle with a jigsaw in this case is facilitated.
• The printed image is applied face-down to plywood and ironed. For A4 format, one minute is enough. Instead of an iron, a construction hairdryer is suitable.
• After the paper has cooled, remove it. If there are gaps in the outline of the sketch for cutting out a miracle with a jigsaw, they are completed with a pencil.

Making holes and sawing

Cutting out the inner grooves with a jigsaw is preceded by the design of the holes. The process includes the following steps:

• Prepare a drill with a drill diameter of 3 mm or an awl of appropriate dimensions.
• The tool is placed in the middle of the groove and a hole is made.
• It is recommended to pre-protect the desktop with a board.
• The presence of an assistant is only welcome.

To decorate the internal grooves with a jigsaw, the nail file is inserted into the hole and fixed at the top of the tool. After processing a small area of ​​about 2 cm, check the evenness of the sawing. In case of a poor-quality cut, it is better to replace the canvas with a more suitable specimen. If the cut is not straight enough, try correcting the imperfections with a flat file.

Important! Observe safety regulations, do not get your fingers under the file.

Cleaning of parts

Upon completion of cutting, a miracle with a jigsaw, small chips on the back of the parts are cleaned with sandpaper. Also, the prepared items of the craft need polishing. The ribs and the back of the parts are first processed with medium-grain paper, at the final stage, fine-grained sandpaper is used. Internal grooves cut with a miracle jigsaw can be easily cleaned with a rounded file. Strive to be completely free of bumps and burrs at the end of the cut.

Having achieved the desired result, they proceed to assembling the parts of the craft, prepared by a miracle with a jigsaw. An interesting drawing for cutting and a photo of the shelf are presented below:

The final stage

After assembling and adjusting all the parts, the crafts proceed to gluing using PVA or Titan glue. Depending on the design, it is recommended to tie the multi-layer elements tightly with a strong thread and leave to dry. The process lasts no more than 15 minutes. An example of a product that is difficult to cut out with a jigsaw is shown below in the photo and drawings:

Burning patterns on individual elements of the craft allows you to add decorativeness. Previously, the drawing is applied with a pencil, after which they work with an electric burner. An openwork vase for sweets will become a worthy table decoration:

Sawing a miracle with a jigsaw is a painstaking task. In order for the product to serve for a long time, it needs decorative processing. The preservation of the pristine beauty of natural material is facilitated by varnishing on wood. For work, you need a high-quality varnish composition and a convenient glue brush. Aim to avoid scratches or visible streaks on your craft. When cutting out figures of animals or models of mechanisms with a miracle jigsaw, sometimes they resort to fragmentary coating of the product with paints. This technique brings the craft closer to the original.

Wood and sheets (slabs) based on it are one of the cheapest and most flexible materials. For those who like to work with a jigsaw, plywood is of interest first of all.

It is her home craftsmen who most often choose for the manufacture of various crafts. If you organize the work correctly, you can create real masterpieces.

Crafts from this material are made for various purposes, but basically they can be divided into two groups - for decorating premises or territory (for example, fences from the inside, a garden plot, and so on).

Variety of plywood

If you focus on the optimal combination of indicators such as quality and price, then FSF or FC products are selected. It is characterized by resistance to dampness and temperature fluctuations. This alone is enough to ensure the durability of a hand-made craft. But there is a fundamental difference between these types of plywood - in the component composition of the glue, which holds the veneer layers together.

In the first case, it is toxic, therefore FSF sheets are used only for outdoor work. But for crafts intended for indoor use, FC plywood is quite suitable. Its counterparts are much more expensive, therefore they are not considered as material for simple, easy-to-make crafts.

Type of sheet grinding

It's easy to figure it out: Ш1 and Ш2 - respectively, one- and two-sided; NSh - coarse plywood. That is, the craft still has to be "brought to mind", polished. The choice according to this parameter depends on how it is planned to be arranged and placed in the future. A sample fixed on the wall and, for example, a figurine (stand, vase, toy or other) that is viewed from all sides are different things.

Plywood texture

Much depends on personal preference. If it is planned to preserve the natural appearance of the tree when applying the protective coating of the craft, then it is better to purchase birch veneer plywood under the varnish. But for the subsequent painting, it is advisable to choose pine.

For various plywood crafts, it is advisable to focus on an oil or acrylic base. The explanation is simple - they are less susceptible to fading in the sun, therefore, you do not have to frequently update the outer coating; it will not change its original appearance for several years.

Plywood grade

When choosing a sheet for crafts, it must first of all be examined for knotty and inclusions. Significant defects will not only complicate the cutting of the material, but also initiate the appearance of cracks or "holes" (as a result of falling out of the same knots). Next - inspection of the end surfaces. During the cutting process, plywood is subjected to dynamic loads (vibration). If at least signs of veneer peeling are noticeable on the side parts, such material should not be purchased, even if its price is too tempting.

In the future, in the process of making crafts, many problems will arise. As a result, the rejection of plywood and its increased consumption. In aggregate terms, this in terms of money will come out about the same in comparison with the purchase of high-grade material, and in terms of the time spent and the quality of work - a big minus.

Thickness of sheets

If the crafts are cut with an electric / tool, then it is limited to 30 mm. For a hand jigsaw, it is advisable to use relatively thin plywood; maximum three-layer. That is, no more than 9 mm thick.

What you need to work

Jigsaw

This is a priori, since we are talking about making crafts using such a tool. The question is, which one is the best to work with. Electric models are much more expensive than manual counterparts, but they have a lot of advantages. About V.

For example, high speed and accuracy of cutting, cleanliness of edges, the ability to change the parameters of the cut, and a number of others. If a plywood craft is not a one-time, short-term hobby, then it is worth spending money on an e / jigsaw. It is versatile, and will come in handy on the farm more than once, because depending on the type of file it can “work” not only with wood, but also with non-ferrous metals, plastics, and plexiglass.

It is somewhat more difficult with a manual jigsaw. Its design is quite simple - a frame with screw clamps and a handle + file.

The nuance is that the cutting blades break quite easily (from excessive pressure, changing the position of the hand tool), and therefore it is advisable to purchase them with a margin; fortunately, they are cheap.

Hacksaw

It is needed only at one stage - when cutting the dimensional sheet into separate fragments. Doing this with a hand jigsaw is an unpromising and unprofitable occupation; time and files will be spent a lot.

Stand

No one will cut plywood by weight; It's clear. Cut out the details by laying the sheet on the countertop - there is a risk of damaging it. It is in order to ensure the "safety" of the latter that the stand is needed. You can make it with your own hands from trimming the board. How such a device looks like (one of the options) can be seen in the figure.

The fixation of the stand on the base is made with clamps (on a non-working table) or self-tapping screws (in case there is a carpenter's workbench in the annex, shed, garage). Although these are not the only mounting options. How to proceed is easy to understand, taking into account local conditions.

Skin

The ideal tool for fine woodworking -. But for plywood crafts that do not differ in large areas, it is not suitable. Therefore, only sandpaper; medium fraction - for primary grinding of workpieces and with fine grain - for finishing.

Additionally

• Files and files.
• Awl.
• Simple pencil and carbon paper.
• Glue, if the craft is created as a composite or multi-level, that is, with the fixation of two or more figured fragments in separate areas.
• Varnishes, paints, stains.

Examples of drawings and sketches of plywood crafts

Copying "one to one" in this case is hardly advisable. Any work done with your own hands is a process with a creative component. That is why the dimensions should be determined independently, depending on where it is supposed to place (or how to use) the craft. For example, will it "look" in a specific place, will it organically fit into the interior of the room?

Even if you like the drawing, it is not difficult to change the geometry of the figure by applying the scaling rules. Moreover, when it comes to drawing a contour on plywood with a simple pencil; to correct any mistake, it is quite easy to correct something in some areas. It is not much more difficult to modify any sketch, adding something of your own, original to the sample.

There is another solution - you can download any picture you like from the Internet. Printing it at the right scale is not a problem. It remains only to transfer it to plywood using carbon paper and shade the areas that need to be cut. This is when it comes to curly crafts. It's even easier with an outline pattern; cut exactly along the line - and that's it, you're done. All that remains is to do the decoration of the product.

Basic rules for cutting with a jigsaw

• Laying under a rigid backing sheet. It is in order to ensure the hardness of the surface under the plywood that the stand is used. A sheet, even a small one, bends quite easily (under pressure), therefore, without this device, a high-quality cut, strictly along the line, will not work.
• The working body of the jigsaw (saw) must be strictly perpendicular to the end of the sheet. Moreover, constantly, throughout the entire process of cutting the material.
• The tool is fed along the line in a translational motion, but without effort. Otherwise, the file will break immediately. As well as when it deviates from the "vertical".
• Cutting holes "blind", that is, somewhere along a sheet of plywood, with an indent from its edge, is done as follows. At any point of the outlined contour, a "hole" is drilled with a slight offset to the center of the fragment. The diameter is chosen so that the file fits easily into it. After attaching it to the tool frame, you can cut in any convenient direction.
• A curly cut in plywood suggests sharp turns, smooth bends, and so on. First, at the point of changing direction with a jigsaw, without changing its position, it is necessary to make a small hole in the material. To do this, you need to continue the cut with a file, strictly maintaining the orientation of the tool, and at the same time turn the piece of plywood. As soon as the plane of the cutting part coincides with the required direction of further cutting, it can be carried out along the marked line.

Having mastered the manufacture of fairly simple plywood crafts, you can take on more complex options. As an example - self-assembly of furniture (shelves, bookcases, original hanging shelves). With a skillful approach to business, plywood makes excellent countertops, cutting boards, window frames and so on. It is easy to make a folding chair from this material, with various modifications. Who is interested in this,.

Plywood also makes great frames for paintings and photographs. For those who have a plot, it will be possible to do the decoration of outbuildings; the same gazebo, a house above a well, or something else. There are many options. The main thing is to want to learn.

In the process of preparing for cutting with a jigsaw, do not forget that all drawings and drawings are nothing more than the basis for developing your project. A little imagination, time, effort, and you can make a truly real masterpiece from plywood.

1. Hand tool
2. Jigsaw
3. Stencil preparation
4. Sawing process technology
5. Defects in work

Woodcarving with a jigsaw is rapidly gaining popularity: many want to purchase an interesting piece of decor for decorating the house, furniture and even clothes! Carved objects made of plywood of various thicknesses organically fit into any style of the interior, often people buy photo frames for pictures with ornaments, sawed-out words and letters, or order intricate shelves and other interesting products. Few people know that artistic cutting out of plywood with a jigsaw is a matter accessible to anyone, even an unprepared and inexperienced person. You just need to understand how to work with the tool.

What is a jigsaw: a general description

A jigsaw is a tool designed for cutting various contours from plywood, including curved ones. It is equipped with a fine-toothed blade that can cut the plywood smoothly without significant burrs.

Hand tool

The ancestor of this type of tool is a hand jigsaw. It is a metal arc in the shape of the letter "U", between the ends of which the saw blade is stretched, attached to the clamps. They securely hold the file while working and allow you to adjust its tension. There is a handle on one side of the frame.

The clamps on the tool can rotate to create different sawing planes, thus providing the ability to carve wood of varying difficulty.

When cutting out of plywood with a hand jigsaw, you need to be careful: its design is rather fragile, with intensive work, the blade often breaks from effort and heat, so it has to be replaced. To do this, each master must have several dozen spare files.

When working with a jigsaw for carving internal contours, it is convenient to use such an auxiliary board as in the photo: it will help protect the table and solve the problem of a convenient location of the workpiece.

Jigsaw

The tool is powered by an electrical network. It is a body in which the working mechanisms are located, and a handle for control is also made on it. The sawing organ is located in the front lower part. The blade is often protected by a foot that allows the contour to be cut straight along the line without deviations. Advanced and professional jigsaw models have various attachments to facilitate the sawing process and smooth the edges of plywood.

The blades can have different shapes and sizes. It is necessary to select files appropriate to the material being processed, so that no damage or damage to the plywood sheet occurs during the operation of the mechanism.

Classification of jigsaws by power and application:

In the instructions on how to use the jigsaw, or in the technical passport, the main parameters of the tool should be described, which must be taken into account when using the mechanism.

Wood carving tools

Sawing with a jigsaw is a creative process, but requires preparation and additional equipment. What is required for work:

Stencil preparation

Jigsaw drawings can be of different sizes, depending on the scale of the product being made. To create a diagram of a shelf, a piece of furniture or a composite volumetric toy, you can take a large sheet of Whatman A1 or A0, the wallpaper remaining after the repair is also suitable, for small figures they take plain A4 paper or another suitable format.

On the surface with a bright pencil or marker, draw the outline of the future product, adhering to the dimensions. This can be an element for assembling furniture, a shelf or other large product.

There are so many patterns for jigsaw sawing on the web that it can be difficult to choose the right one. It is much easier to come up with your own patterns for cutting and transfer them to paper.

Transferring the image to the surface of plywood or boards

Before you start cutting with a jigsaw, you need to transfer the image from the stencil to a wooden or plywood blank. To do this, cut out a shape from the sheet, apply it to the surface of the plywood and carefully outline it. It is desirable that the line is straight and precise. We use a simple pencil, so that if necessary, you can correct the line by erasing it with an eraser.

We apply the contour from the back so that the remnants of the lines are not visible on the finished product. The inner area can be shaded so as not to cut off excess and mark the inviolable areas.

It is important to transfer the pattern in such a way as to minimize jigsaw sawing along the grain - it is so difficult to get a straight line.

Sawing process technology

Surely, many have heard how to use a jigsaw. Working with the tool will not cause difficulties if you prepare for it correctly.

Plywood carving starts from the inner contours of the pattern... To do this, you need to make slots for inserting the tool blade:

• Plywood is often taken thin, and when cutting a large contour, problems will not arise, and stress may arise in a small residue. Sawing with a jigsaw inside can damage the product - chips, burrs, dissection;
• It's easier to work this way: you always have something to hold the workpiece for. A large sheet is much easier to handle than trying to hold onto a small sawn piece while shaping the inside of it.

How to saw with a jigsaw:

Working with a jigsaw is much easier than with a hand tool, there is no need to exert physical effort and the process is faster.

How to saw with a jigsaw:

As you can see, there is nothing complicated in this process.

Defects in work

If you did not follow the technology, did not hold the tool correctly, the saw may simply move off the line. Why the jigsaw cuts crookedly:

• tilted the tool while working;
• the tension of the file is weakened;
• with an electric one, the saw attachment may be loosened.

To avoid such problems, be sure to check the tension of the saw and the attachment of all working elements before cutting. If the blade is skewed and stuck, it is best to start over and make the line parallel to the defective one.

A little about safety

Safety precautions when working with a jigsaw for cutting plywood and wood are simple:

• Use protective equipment - goggles, gloves, gown. These items will protect you from dust and small chips.
• Sawing with a hand jigsaw should be done carefully so as not to damage your fingers with the file. Observe the distance between the body and the instrument.
• If you are a beginner, carefully read the instructions on how to use the jigsaw, the main characteristics of the tool. This information will help prevent accidental injury and damage to the unit.

Wood carving with a jigsaw requires care and attention. Both your health and the integrity of the finished product depend on these qualities.

What can be made from plywood: interesting ideas and drawings

Sawing wood with a jigsaw or hand tool is a creative process. You can create many decorative products in different directions:

Plywood craft drawings do not have to be exact dimensions. Even taking an example from the Internet and slightly changing its proportions, you will get a unique product that no one has in this form.

DIY plywood crafts can be painted or left in their natural color, you can glue buttons, beads, ribbons and other decor on them to revive the product. To do this, it is worth attracting children to work, their imagination is a bottomless storehouse of interesting ideas.

We offer you schemes with a photo for cutting with a jigsaw from plywood.

You can come up with what you can cut out using a hand or power tool, make your own sketch and transfer it to paper, then to a piece of wood or plywood.

Jigsaw carving on plywood requires certain knowledge and skills. If you don't have them, consider the following rules:

If your new hobby is sawing a variety of decorative elements, burning or wood carving, then our advice would be to start with a material such as plywood.

There are several significant reasons for this:

Plywood is easy enough to work with.

If you have a good tool in your hands, and you start with small figures, they will only take you a couple of hours to make.

The material is versatile in use, so you can make literally anything you want from it: furniture, toys, small decorative elements.

All this can be a great addition to your home interior.

Features of working with material

What is a plywood sheet. It consists of several veneer sheets at once, which are connected to each other with glue.

Important: plywood can be of different types: based on beech, birch, pine.

Not only the quality of the finished product, but even its structure and color depends on which sheet you choose.

If you are going to cut out various figures with a jigsaw, then you need to choose the highest quality types of plywood.

They are particularly durable, which ensures that the plywood does not crack, ruining the entire appearance of the product at the most unpredictable moment.

If you are going to start work immediately, immediately on the day of purchase, then choose only dry sheets of wood.

They will not break the jigsaw file every 10 minutes.

To work with plywood, you will need to acquire a number of tools.

Basically, they are constantly the same for all types of products, so that only a one-time investment is required:

• Jigsaw
• Jigsaw blades
• Hand or electric drill
• Ruler
• Grinding Machine
• Scorcher.

Framework

If you want to beautifully decorate your home or present an original gift to someone close to you, make a plywood frame with your own hands.

The preparation process will not take you much time, because you just need to get the necessary materials.

Note!

They are standard for all cases, and we have already mentioned them earlier.

We will offer you master classes on light plywood crafts. You can make either a regular straight frame or cut various patterns and figures on it.

First you need to make a template, and after that you can cut it out, trace the contours with a pencil on plywood and start the manufacturing process.

This stage is not only the most responsible, but also the most exciting. If you put a piece of your soul into the work, everything will definitely work out. The finished structure must be varnished. Ready!

Doll furniture

This task will be a real test for parents.

Note!

The so-called test of the acquired design skills.

The peculiarity of creating doll furniture is that children absolutely do not tolerate falsehood.

If they see that the furniture is not worked out in detail, and instead of a kitchen stove for your favorite doll, you brought an ordinary rectangular bar, then you simply cannot avoid serious offenses and children's disappointments.

The second feature of making such a plywood craft using a jigsaw is that all this furniture must be carefully worked out with sandpaper or a sander.

Your child will constantly be in contact with these self-made toys, and in the case of poorly processed edges, he may get injured.

Note!

Well, the last feature of plywood and home crafts is that the materials for such furniture must be absolutely non-toxic and normal for constant contact with the child, because he can drag it into his mouth or take it to bed with him.

This is not a simple applique or paper craft, so you need to take the matter seriously, following a whole list of actions required to be performed.

Plywood work

Just as simple furniture is made in detail, and then assembled into one piece of furniture, so do-it-yourself plywood crafts should be done separately.

To do this, first of all, prepare special drawings of plywood crafts, on which specify the dimensions of all parts and their fasteners.

Take a finished plywood sheet and attach a paper part template to it.

Trace the part with a pencil and cut along the contour with a jigsaw.

After that, each detail must be cleaned with sandpaper or a grinding machine and only then assemble the piece of furniture.

When you are done with the whole set, open it with varnish.

Below are different options and photos of plywood crafts. Choose the one that you like.

Photo of plywood crafts