Stand for flowers on the balcony with your own hands. Do-it-yourself floor shelves for flowers made of wood. We make a rack for seedlings with our own hands

For most housewives, flower cultivation is a very exciting experience. A small hobby gradually develops into a big hobby, filling all the free space. It is good if the living area allows you to allocate the necessary territory to create a green oasis. But what about this sprout, which has no place on the windowsill, you can't put it on the closet either, the table is busy, and it will simply get lost on the floor among the large flowerpots.

The solution to such a global problem is floor and wall shelf options. The modern market offers a wide range of ready-made designs. The variety of shapes, structures and colors is amazing and has no boundaries. However, hand-made flower shelves become a unique design solution and bring an extraordinary atmosphere into the interior.

Variety of solutions and materials

Before getting down to work, it is necessary to create an approximate plan for the arrangement of flowers, on the basis of which the sizes and features of future shelves will be determined. Depending on the type of plant, two main options are used:

wall-mounted;
floor.

The number of flowerpots located on the selected structures also divides them into several types:

Single. In most cases, they are used as wall-mounted, small, densely flowering bushes or curly dense greens look very beautiful in them.
Double. It is better for them to choose flowers with the same conditions for care. They can be wall-mounted and floor-mounted; for the second option, large tree-like plants are more suitable.
Multi-seat. The shelves occupy a certain section of the wall, the main thing is not to put very heavy pots in order to prevent falling, in the floor version, you can arrange up to ten flowerpots.

All offered options can be designed as corner shelves, thus saving space and additional opportunities for design innovations. For lovers of vine plants, ceiling shelves are offered for consideration.

A wide variety of materials can be selected and combined for the self-made invention of flower shelving. Very often, many people opt for a tree. Despite the environmental friendliness and versatility in use, do not forget that you can always find other interesting options at hand that have their own advantages. We will consider some of them in more detail.

Plywood shelves

Plywood is perhaps the simplest and cheapest material from which flower shelves of various shapes and sizes are made. If there is no plywood sheet in the house, a small amount of money will be spent on its purchase. The process of creating a plywood shelf is not difficult. With the necessary tools, the task at hand will turn into a work of art in a short time.

At the beginning, you need to make a sketch. Here you can show unlimited imagination. The main thing is that the resulting structure is consistent with its initial purpose, is strong and can withstand the intended number of pots.

When the canvas is ready, the edges of the saw cut are smoothed with sandpaper and holes are made for future fastening. The entire surface is covered with a special solution, thereby increasing moisture resistance and preventing mold. After drying, the shelf is opened with varnish.

Creative people can demonstrate their talents by decorating a product with drawings, glue them with pebbles or shells, and show creativity.

To fix the wall options for plywood shelves, metal corners or brackets are used, due to which they are attached directly to the wall.

Plastic shelving

The most common place for placing flowers in a room is a windowsill. Floral racks are created using such a plastic sheet. You can buy it at almost any hardware store or order at the manufacturer's factory.

For the construction, you will need several nickel-plated pipes, fasteners, flanges for fastening to the floor and a pair of brackets, do not forget about the tools necessary for work.

After the measurements are made, the window sill is cut to the desired length. The next step is to drill holes for pipes, two at the edges, it is important that they are parallel to each other, and one in the center. The length of the pipes must be the same, otherwise the structure will be unreliable and wobbly. The assembled rack is secured with ceiling brackets and floor flanges.

The advantages of plastic shelving are durability, they are not afraid of moisture, they are easy to care for.

Corner flower shelves

All materials listed here can be used to create a corner shelf. For small items, leftover materials will be sufficient.

The technology for creating corner shelves with your own hands is very simple. A surface of the required size is cut from a chipboard sheet. A galvanized pipe is threaded into the prepared holes and the whole invention is connected with flanges. With the help of brackets, it is fixed to the selected surface.

The next stage is varnish or paint treatment.

To create a green corner, an interesting solution would be a kind of corner rack. As the shelves grow, they decrease, representing a pyramid. On this design, you can arrange flowers of different sizes using climbing plants on the sides.

Wooden flower shelves

Wood is one of the most reliable materials used in construction. Properly assembled and secured wooden racks or shelves can accommodate any number of plants, regardless of size. In the choice of wall-mounted wooden shelves, you can limit yourself to the simplest option. For this, a timber of the required length is taken, covered with varnish or paint and fixed with metal corners to the wall. If you replace the fasteners with leather straps, you get a creative design approach that brings individuality.

For plants in large flowerpots, wooden floor racks are made. They support a lot of weight, allowing you to combine different types of colors.

A corner shelf is easily assembled from scraps, even if of unequal length. Blooming bushes diversify the boring life of the corners with their bright colors.

For lovers of unusual options, wooden shelves are offered for consideration, combining several different materials.

The assembly method for wooden shelves or racks is the same as for the plywood version.

Wall shelf for flowers made of wood and metal

When combining materials for flower shelves, we recommend choosing a combination of metal and wood. The welded metal frame with wooden flooring is used for wall-mounted shelves and fits very harmoniously into modern interiors.

For manufacturing, you will need a drawing with measurements, several rods, which in the future will form the basis of the shelf, and a wooden board for the partition. After welding the main part, it must be treated with an anti-corrosion solution and painted in the selected color. Next, a prepared wooden board is installed, the finished product is attached to the wall with self-tapping screws.

Considering this combination of materials in floor-standing flower shelving options, the bulk of the work follows the same plan. Preference is given to options in several tiers, and lovers of sophistication will like forged flower stands.

Glass flower shelves

The main location of the glass shelves is usually in the window space. On such shelves, all plants will receive the necessary portion of light. When preparing for work, it is necessary to choose the right glass thickness. The best option is 0.5 cm. Having strengthened the lower part with a tree, such a structure can easily withstand up to ten small flower pots.

If handling a glass cutter causes some difficulties, it is better to seek help from knowledgeable craftsmen. Providing the right sizes, they will easily complete your task.

In addition to glass, you will need iron corners with which the slats are attached. Shelves are placed on top of the slats.

Great importance is attached to the correct arrangement of flower racks and shelves. By following a number of simple tips, harmony is achieved between green space and the atmosphere of a home:

If decorative flowers predominate in the floral variety, it is better to use a wide floor rack. Its height should not exceed the middle of the height of the room, otherwise you will get a visual distortion of the space.
Placing flowers on tiered shelves, we use the rule from largest to smallest. On the lower floors, lush bushes are placed in volume, and gradually we create a transition to miniature options.
When creating flower stands with your own hands, special attention should be paid to the supports. Large flowerpots require a strong and stable structure, especially if there are small children or animals in the house.
A large number of plants placed in the neighborhood on the same shelf should have the same conditions for care.
Add variety by coming up with interesting ideas and adding small accents. Any driftwood with an extraordinary approach, with the addition of artificial accessories in the form of butterflies or bugs, will turn into a masterpiece.

The use of flower shelves is not limited to the interior of the premises. Houses, apartments with balconies or loggias contain entire greenhouses. Owners of home gardens create incredible compositions on the territory. Refurbished stairs, bicycles and wheelbarrows are used as shelving. Teapots, watering cans and other old utensils can serve as a hanging shelf. Such green spaces become one with the owners, and self-designed racks and shelves for plants are an integral part of a small flower paradise.

Indoor flowers are a spectacular addition to the interior. Shelves will allow you to compactly and aesthetically place planters and pots with plants. The structures should be ergonomic, roomy, and durable. The choice of configuration depends on the design of the room and the required functionality. Models are made for wall, floor, hanging, etc. You can create shelves for flowers with your own hands according to a standard or author's project.

Variety of solutions and materials

The plan for placing shelves in the interior determines the dimensions, dimensions, and options for decorating products. The configuration of the model is influenced by the number of plants, the type of room (bedroom, kitchen, living room), interior design, type of flower (liana, shrub, etc.).

By location, the models are divided into wall, floor, hanging products, etc.

Floor products are designed for flowerpots with shrubs and small trees. Stationary structures can be standard or multi-tiered for the design of the green zone in the house. Models are selected in accordance with the dimensions of the room. In small rooms, simple stands for 1-2 pots are installed. You can make a budget floor shelf for flowers with your own hands from available tools (drywall, chipboard sheets).

Wall structures are compact and optimal for small apartments. Shelves can be standard or corner, designed for several plants, or a set of flower pots.

The pendant models are also ergonomic and compact. Products are attached with cornices to a wall panel, ceiling or window sill. Metal chains, strong belts and intertwined ropes are optimal as attachments.

In accordance with the number of plants, the structures are designed for 1-2 pots or 8-10 containers. The length of the shelf depends on the number of vessels.

Compact single models are used as wall-mounted and pendant. Designs are optimal for small flowers or climbing vines.

Multi-seat structures are optimal in spacious rooms. Space is allocated for shelving near the wall panel or in the corner of the room. Up to 10 pots can be placed on floor racks. It is not recommended to install light-loving plants and massive pots on the upper surfaces.

Flower shelves are made from different raw materials. The choice is determined by the design of the room, the volume of the flower containers. Lightweight flowerpots do not require a reinforced structure. Massive pots are installed only on stable and spacious shelves.

The most common for the manufacture of flower shelves are chipboard sheets, wood, glass and metal. Popular as floor and wall forged products. For self-made construction, improvised means (plywood, cardboard, pallets, iron pipes) are suitable. Combination of materials with different textures is widespread.

Plywood

Plywood wall shelves are budgetary, practical, easy to manufacture. Raw materials are easy to process, products are cut in various shapes and sizes. When creating a model, standard or author's drawings are used. For self-production of the circuit, measurements are required, which are displayed in the project and transferred to the surface of the plywood.

Plywood elements are cut with a jigsaw. Sand the edges with sandpaper. Parts of the structure are fastened with screws. The surfaces of the hanging shelf for flowers are treated with a moisture-resistant composition, covered with tint varnish or paint. If necessary, the product is decorated with painting. Wall options are attached to the wall panel with metal brackets and corners.

Plastic shelving

Inexpensive wall and floor plastic shelving products are used to decorate country houses or apartments in Art Deco, Art Nouveau and Neoclassical styles. The material can be tinted, transparent, smooth or textured.

Plastic flower racks on the wall are durable, moisture resistant, easy to clean. The products are easy to move and comfortable to use.

The raw material is plastic, so the shelves can be of non-standard configurations and sizes. You can make furniture yourself from plastic sheets, metal pipes and brackets.

Corner

A large variety of wall designs are of the corner type. The products are functional and ergonomic, because allow you to effectively use the area of an apartment or house.

Corner flower shelves are made in the form of a rack, tapering towards the top. The model allows you to place flower pots of different sizes. On the sides of the rack there is a space for fastening the climbing vines.

For light-loving plants, it is necessary to equip additional lighting devices on the frame. Hand-made structures are treated with impregnations and varnishes.

Wall shelf made of wood and metal

A popular solution is to create a shelf from scrap materials - wood and metal alloys. Steel is used to create the frame, wood is used for decking. Welded frames are budgetary, practical, durable and versatile in any interior style. Decorating the product with forged elements looks spectacular.

To prepare the structure, it is required to create drawings and fixing diagrams. Wall shelves are created in one layer or constructed in several tiers. Their size and shape depend on the functionality and dimensions of the room.

Metal rods become the basis for the shelf. For long-term operation, steel surfaces are treated with anti-corrosion compounds and varnishes. It is recommended to match the shade to the main color of the room.

Boards are sanded with sheets of sandpaper, painted with tint varnish, installed on a metal frame and fastened with screws. The finished model is attached to the wall with self-tapping screws and steel corners.

When choosing plants for wall shelves, several nuances must be taken into account. For structures, flowers are optimal, which do not require intense lighting, and are small in size. For large pots, you can make a multi-tiered flower shelf with support on the floor surface.

Glass

You can make flower shelves out of glass. The models are aesthetic, lightweight, graceful and visually expand the space.

Designs for indoor flowers from glass are made of compact sizes, therefore they are optimal for window openings and as wall blocks. Designs are suitable for light-loving plants. When choosing a model, it is important to calculate its dimensions, optimally glass with a thickness of about 0.5 cm. Products are supplemented with steel inserts (brackets, corners).

Curly vines are suitable for hinged glass shelves. Experts do not recommend installing massive pots with shrubs on fragile shelves. The lower block of the structure can be reinforced with wooden beams. The reinforced model can be used as a floor model and will allow you to install up to 10 compact pots.

For living rooms in country and loft styles, the surface of the structure requires minimal processing. In the premises of Provence and Art Deco directions, the use of aging and decoupage techniques is recommended. Pipe racks installed in children's rooms and kitchens require mandatory decoration with varnish and paint.

Do-it-yourself floor structures made of gas pipes are the best option for country houses, summer kitchens. Before installation, the frame must be cleaned with brake fluid and soap. Assembled structures are painted with aerosol paints.

Made of wood

Wood flower shelves are among the most durable design solutions for plant pots and seedlings. For long-term use, it is necessary to select high-quality fasteners and accessories.

Designs can be multi-level and transformable, or simple, designed for 1-2 plants. Laconic models are created from bars coated with paint or varnish. Wall-mounted products are fixed with metal corners and screws.

Large tubs with bush-type plants are installed on floor racks made of wood, because structures must withstand a large mass.

For suspended structures, massive boards are not used, because plates are held on tapes or belts. The hinged model is one of the original design solutions and is optimal for rooms in the loft, country, and Provence styles.

During operation, it is necessary to take into account the instability of wood to moisture. During irrigation, water gets on the surface, the boards deform, become moldy. Therefore, before use, wooden structures are treated with moisture-resistant impregnations, covered with several layers of paint and varnish.

Glowing wood shelf

Luminous constructions will add originality to the room. It is possible to make backlit shelves with your own hands from improvised means. For the construction of the luminous shelf, wood bars with cracks and chips are optimal. Uneven surfaces are filled with a mixture of fluorescent pigments and polyester resins.

The composition is poured into cracks, then the surfaces are sealed with paper tape. During processing, the shelf should be in a horizontal position. After drying, the product must be sanded. The shelf is covered with several coats of anchoring varnish.

Shelves with luminous surfaces allow you to effectively zone the space, equip the space for rest.

What do you do with old furniture?

Houseplants are a harmonious addition to any interior. At the same time, they improve the atmosphere of the room, are pleasing to the eye and allow you to enjoy the contemplation of fresh greenery at any time of the year. Once, having bought or received a gift a flower in a pot, many continue to regularly replenish the collection. The time comes, and there is not enough space on the windowsill, so you have to look for new areas to place flowers. Various floor and wall shelf designs allow you to compactly arrange the pots, transforming the room. The presence of a furnished balcony is another opportunity to grow flowers.

Variety of design solutions

Depending on the number of indoor plants, single shelves are selected or to accommodate a large number of pots. Based on the location, the regiments are:

For windowsill, including pendant models. Belts, ropes, chains are suitable as fasteners.
Outdoor;
Wall shelves, including corner shelves;
To the balcony. All previous types of shelves can be applied here.

Various materials are used for their manufacture. The choice depends on the surrounding design of the room and the size of the flowers themselves: the insignificant weight of small plants does not impose serious requirements on the strength of the structure, large representatives of the flora need a reliable shelf that can withstand a significant mass. Most often, flower shelves are made of the following materials:

Wood and its derivatives (chipboard, gypsum fiber board, MDF).
Glass is often combined with chrome elements.
Forged metal structures.

When choosing a material, take into account the likelihood of water getting on the shelf as a result of watering flowers, so you should take care of the moisture-resistant properties of the product.

Advice ! In a small space, it is better to refuse to place floor stands. In this situation, wall and hanging shelves will help out.

Stands for flowers on the wall

Wall-mounted flower shelves have a variety of design solutions: single and multi-tiered stands made of wood, glass or metal. Their size and shape depends on the creativity of the indoor flower lover and the surrounding design of the room. It is better to fill the wall shelves with plants that do not require a lot of sunlight. Light-loving colors will require the installation of additional lighting, especially if the shelf design is angular.

The wall shelf with belts is distinguished by simplicity of manufacture and originality. To make an uncomplicated stand, you need a wooden board, two strips of leather straps and fasteners. The work includes the following steps:

A shelf of the required size is cut out of the board. The wider width guarantees better stability. Sections are processed with coarse sandpaper.
The future wall shelf is treated with stain, after drying, the surface is covered with a waterproof varnish. This will prevent the stand from swelling during the watering process and moisture ingress.
Two stripes are formed from the skin. Their length depends on the width of the shelf itself, and at what distance from the mounts its location is planned. With a board width of 15 cm and a gap from the holes on the wall of 25 cm, the length of the leather strip is 70 cm. Unnecessary belts for these purposes will be just right.
Having folded each part in half and stepping back from the edge 3-4 cm, holes are prepared in the product using a drill. The same operation can be done with a nail and hammer.
To attach the flower shelf, two marks are made on the wall. The distance between them is equal to the length of the flower shelf minus 2 cm. After preparing the holes, dowels are inserted into them.
Leather strips folded in half are brought to the place where the flower shelf is attached to align the holes, and then fastened by screwing in the screws with a screwdriver.
It remains to insert a wooden board into the fixed leather hinges and the wall shelf for flowers is ready.

Similarly, you can make a two-tiered shelf for flowers. To do this, you will need to increase the length of the leather holders, and fasten the top shelf to the belts with nails.

Advice ! Wall-mounted shelves are best used for small flowers. Large plants are best placed in floor structures.

The selection of photos below represents a small part of the possible models of wall shelves designed for indoor flowers.

Floor models

It is practical to use floor shelves to arrange large indoor plants. Their assortment is also distinguished by an abundance of models and materials used to make them. Single designs and multi-tiered stands, allowing you to immediately form a whole green corner, are selected depending on the free area and the size of the flowers. If you want to decorate the room with floor structures, consider the following recommendations:

When purchasing a floor shelf with a lot of space, take care of the placement of plants that can coexist with each other.
Fans of bouquets of wild or decorative flowers will like floor structures with a large table top. When buying single stands, it is better to purchase models whose height does not reach half the height of the room, otherwise the proportions of the room are violated, and the ceilings visually become lower.
The decoration with flowers of a kind of whatnot is carried out in compliance with the following rule: voluminous plants are installed on the lower sections, higher shelves are filled with compact pots.
Pay attention to the stability of the floor shelf legs, especially if there are pets and small children in the house. Massive plants need a solid construction.
Wishing to focus on the flower stand, it is recommended to purchase an extravagant model. Sufficient free space can be filled with a metal product that simulates a bicycle or carriage. An original driftwood with mounts for potted flowers is another interesting floor shelf idea.

Adherents of the classics will find traditional shelves made of wood materials. For lovers of minimalism or owners of small spaces, it is appropriate to pay attention to glass floor structures. The respectability of the interior will be emphasized by the forged floor. Wicker shelves will harmoniously complement the rustic style.

Consider how to make a kind of tiered shelf with your own hands:

The material will require timber, slats, wide boards, fasteners.
For props, 4 beams are taken, its length depends on the desired height of the shelf. Then two letters L are formed from the parts, which are connected at the top with another bar.
The slats are attached to the formed frame at the places where the flower shelves are installed.
Blanks for a shelf of the required length are cut from a wide board. Each subsequent shelf will be smaller than the one below the stand.
Then all the parts are fixed on the rails with screws.
At the final stage, the flower shelf is being decorated: it can be treated with a primer and painted or opened with stain and varnish.

As a result, you will get a similar design for flowers:

Creative people can show their imagination and make an original copy of the floor shelf with their own hands. In the absence of creative talents, manufacturers offer a wide range of floor stands for flowers, some of which are shown in the photo below:

Window sill design options

The windowsill is the first place where houseplant lovers place flowers. The main reason is the abundance of natural light. But not everyone has large wide window sills, so you have to resort to various tricks. The following devices will allow you to install as many colors in the window as possible:

A flower stand made in the form of a ladder.
Cache-pot.
Hanging shelves. As a rule, they are made of glass.

Working with glass requires certain skills, so it is easier to buy a ready-made flower stand. We will consider a similar example of a hanging shelf, made of boards and strong ropes. The manufacturing process consists of the following steps:

Planks are sawn into equal parts. The number of elements depends on the desired overall dimensions of the shelf and the size of the colors to be installed.
Having stepped back from the edge of the board 2-3 cm, the places where the holes are drilled are marked. Their diameter should correspond to the thickness of the rope, ensuring a snug fit.
Two marks are placed on the top of the window opening. The gap between them is determined based on the length of the shelf, reduced by 2 cm.
Two holes are drilled, followed by screwing in the anchor hooks.
The ropes are pulled through the holes in the shelves. A reliable knot is formed from the bottom of the first plate, subsequent strung flower shelves are subjected to similar actions. The knots provide the planks with a stable position.
On each side, the ends of the ropes are connected together, the gap to the top shelf is 15-20 cm, after which they are put on hooks.

Window sill design options with various shelves with flowers are shown in the following photos:

We decorate the balcony

The balcony has long ceased to be a place for collecting unnecessary things. In a modern apartment, this is a cozy corner for relaxation, and the flowers on the shelves look very harmonious here. The size of the balcony, its shape and the degree of arrangement affect the choice of the design of the shelf for flowers. Consider some interesting ideas for decorating additional space:

Mobile boxes. On a spacious open balcony, it is appropriate to arrange flowers in boxes on stands equipped with rollers. This allows you to change the position of the structure for flowers, depending on the direction of the sun's rays. It is easy to move such shelves aside, if necessary, to additionally install furniture for evening tea drinking.
The limited area is not an obstacle to decorating the balcony with shelves with flowers. Suspended structures will come to the rescue. These can be pots or hanging shelves, the manufacture of which is described in the previous section. Separate flower pots fixed with hooks on the parapet also look organic. Another shelf option is a container made of wood or cut plastic pipes, installed behind a fence.
The heated balcony can be equipped with multi-tiered flower racks or traditional wall shelves to maintain comfortable conditions during the cold season.
Shelves for flowers on the bay window look very attractive. Here you can combine pots and hanging structures.

Remark! For stationary shelves filled with flowers all year round, additional lighting should be provided in winter, otherwise the plants will experience a lack of light radiation.

Many housewives love flowers and therefore they just need outdoor ones or for flowers. In order to find the right option, you should refer to the advice of professionals and strictly follow them. In the furniture market, there are a huge number of companies that are engaged in the manufacture of shelves. Such products differ among themselves in configuration, adaptation, function and appearance.

Shelf types

The shelf is a fixture that does not have a front wall. In the wall versions there are special mounts, in the floor ones - legs. Wall-mounted flower shelves can be cantilever, with or without side walls, with back surfaces, different orientations (vertical and horizontal), multi-tiered, with corners (including straight ones), inclined and rounded.

As a rule, this type of furniture is intended for storing various interior items, including flowers. Some models are made of different materials (metal, glass, wood, etc.), which indicates that each individual furniture has its own advantages. In the interior, such types as wall, hanging and corner ones can be present at the same time.

A wall shelf for flowers will be an excellent option, since it takes up a minimum amount of space due to the fact that it is located above the main furniture.

A hanging shelf has the same advantages as a hanging shelf. The difference between them is that this option is attached to the surface of the ceiling or wall with belts or other fasteners.

They are located between adjacent walls and can be attached both to the side surfaces and to the ceiling.

If you classify this piece of furniture according to the material from which it is made, then the following options can be distinguished: wooden, glass, metal wall shelves for flowers. There are models from chipboard, gypsum fiber board, MDF, as well as combined ones.

On the market, the assortment of shelves is quite diverse, and therefore everyone can choose the desired option.

Detailed characteristics for an apartment

In each apartment you can see shelves that are intended for various pieces of furniture, including flowers. Models are installed that correspond in their design to the general concept, as well as in the material used, that is, it must be repeated in other pieces of furniture. The shelf can be fixed with corners, brackets and hinges. Which option the owner chooses depends on the style of his room.

The most popular are the wall shelves for flowers made of wood and drywall. This is due to the fact that they are very easy to install and can be assembled by hand. Often, the shelves are sewn with GVL sheets and mounted on metal or wood guides. Such a device will look great in any room, and it will also not clutter up the room.

In order to use brackets with pins, it is necessary to fit the shelf onto the cylindrical rod. As a rule, furniture in this case has a thickness of at least 25 mm. You can use this mounting option in a version with a minimalist interior. This piece of furniture, in this case, looks very laconic and concise. Wall-mounted flower shelves, which are attached to the wall using this method, are installed on top of the bracket itself. These elements bear not only a structural load, but also a decorative one.

Corner flower shelves are suitable for those who want to beat defects in the joints of the walls. Currently, there are both indoor and outdoor views. An openwork metal shelf will become luxury in the interior. She can become a great accent in any room.

DIY wall shelves for flowers

At this stage, there is a huge number of different wall and floor shelves created by world designers. However, they may not fit all interiors. There are also people who find it difficult to choose the option they need from a huge assortment. In this case, there is no choice but to make the shelf yourself. This is how you can save money and fully satisfy your desires.

First you need to decide on the color scheme, materials and the place where the item will be located. It should be remembered that many flowers require spraying from a spray bottle. That is why the paint to be coated must be completely moisture resistant. Fasteners, a drill, a saw, as well as nails and screws will become true friends during the manufacture of the shelf to the owner. Reiki can be used if desired.

For lovers of extraordinary solutions, there is an option of a beautiful shelf made of ropes and a regular board. The product will somewhat resemble a hanging flower box. It is this design that saves a lot of space, because it requires fixing in the window opening. Thanks to this solution, the flowers will receive more sunlight.

Removable shelves for flowers in this version are made quite easily and simply. You should take a strong rope, hook reinforcement and an ordinary wide board. The latter should be cut into several equal parts. It should be taken into account that the more elements are obtained, the higher the shelf will be. In order not to miscalculate with the place for fastening, it is necessary to retreat 3 cm from the corner. Next, you should use a drill. With the help of it, you need to drill several holes through which the rope will be drawn. You also need to prepare a place for mounting on the window. Then you need to stretch the rope and fasten it to the fasteners.

Shelf blanks

Wall shelves for flowers can be made from ready-made blanks. In this case, they are the most professional and inexpensive. As a rule, in stores there are chipboard complexes that are covered with a film. You can often find small pieces of glass or wood. But for the latter option, you should purchase fasteners yourself. The simplest design will be bars. In the event that it is not possible to buy them in the store, you can do it yourself with the help of rails.

Manufacturers

The largest manufacturers known in Russia, Ukraine, Belarus and other countries are Furniture UA and MERX. The first of them opened a branch in the United States in 2013, which speaks of undeniable success. The company's products began to spread around the world, including appearing in such large countries as Germany, France and so on. The key to success was the use of the latest technologies and high-quality materials.

MERX is a company that was founded in 1993. Since then, it has been at the forefront of the furniture market. This brand is known in countries such as Great Britain, USA, Canada, Estonia, Lithuania and the CIS countries.

What will not the lovers of indoor flowers come up with in order to more comfortably place their favorites at home - capricious violets, spreading monsters and variegated dieffenbachia. After all, if there are a lot of flowers, then placing them so that they do not block the light to each other is sometimes problematic. Before making a flower rack, decide on the place where it will be placed: near the wall, in the corner or on the windowsill itself.

Racks for indoor flowers

A flower rack can be wooden, metal, plastic, plasterboard. The glass flower rack looks very good. But in this case, you need to take into account the thickness of the glass and whether you can cut the glass yourself or it is better to contact a glass workshop. Often they use everything that is at hand, combining different types of materials. It all depends on what tools the master owns and what materials the mistress of the flower kingdom has chosen.

Plywood flower rack in 6 hours

Let's say you have a sheet of plywood at hand. Quite durable and not too expensive material, which in just a few hours can turn into an elegant shelf for flowers, if you have a jigsaw and can use it to cut smooth lines in wood.

What do you need? Materials: plywood - 1 sheet, nickel-plated pipe - 2 pcs., Shelf mounts - 2 for each shelf, varnish or paint, fastening tool. Tools: jigsaw, drill, sandpaper, tape measure.

Manufacturing technology:

1. Thinking over the size of the shelves: we measure the place for which it is intended.

2. According to the measurements, draw future shelves on a sheet of plywood. Moreover, their configuration can be both the simplest (rectangular shelves with rounded corners), and with all kinds of waves, the number and depth of which depends on you.

3. After marking, the shelves are cut out of plywood.

4. Stack the workpieces on top of each other and mark the distance where the hole for the pipe will be located. It is important that this point coincides exactly on all workpieces.

5. A hole is made in two places on each workpiece for a nickel-plated pipe.

6. The workpieces are sanded with sandpaper (especially the ends).

7. Cover the shelves with furniture varnish, preferably several times.

8. We pass the nickel-plated pipe through the holes, fixing it near each shelf. It is important to make sure that the shelves are placed parallel to each other and perpendicular to the tubes.

9. The next step is to mount to the wall. These can be special brackets that attach to the back of the top and bottom shelves and to the wall. Here it is important to correctly mark the wall and use a drill to drill holes into which the self-tapping screws will be screwed. The size and strength of the fastening tool determines whether the shelf will fall under the weight of the flower pots.

DIY wooden flower rack in 3 hours

Dimensions of the offered rack: 23 cm wide, 60 cm long and 70 cm high. There are 3 shelves in total.

Materials: wooden strips (dimensions 3.5x0.5 cm, length - 2m) - 6 pieces, strips, dimensions of which are 2x2 cm, length - 2m - 2 pieces, nails (sizes 25 and 40).

Tools: tape measure, regular hammer, wood saw.

Thin strips will be used to make the shelves themselves, and 2x2 strips will be used to make shelf racks.

Manufacturing technology:

1. We mark the thin strips into pieces 60 cm long, and then saw them off. We get 18 planks.

2. We mark the strips 2x2 cm by 70 cm and cut them. We get 4 racks.

3. From the remnants of 2x2 cm strips, cut out 2 bars of 23 cm each.

4. We take 2 racks, lay them parallel to each other on the floor and mark the places of the future fixing of the shelves. They must be accurately measured. The distance between the shelves depends on how high the flowers you plan to place on the inner shelves.

6. You will need help to assemble the entire structure. One holds racks with shelves, the other fixes the structure with nails (size 40).

7. The finished product is varnished or painted.

Rack-shelf for flowers made of metal and wooden slats

This shelf will serve as a solid wall structure. After all, its racks are welded from metal.

To do this, take metal rods with a diameter of 7-10 mm or a corner (if the rack will stand on the floor) and weld a similar structure, the dimensions of which depend on the wishes and availability of space for the shelf. If the side bases are 90x20 cm, then this will allow you to place 4 shelves at a distance of 30 cm from each other. This is very convenient for placing both low-growing flowers and ampelous ones. Tall flowers can be arranged on the top shelf.

In the process of welding, attachments are provided on the upper inner edge of the structure, and crossbars for placing shelves. There will be 4 of them in total. Then, when the structure is ready, it can be painted.

In parallel, strips of 0.50-0.60 cm long are cut from the bars of 2.5x1.5 cm. You will need 20 slats. Then they lay them out parallel to each other face down and knock them down with the same strips, but short - 20 cm each.

The next step is to place the metal structure on the wall. To do this, use molly, if the wall is made of plasterboard, and ordinary self-tapping screws - for other types of walls. Here it is important to correctly measure the attachment points of the bases for the shelves. They must be in a parallel plane. Otherwise, the shelves will not lie flat on the rungs. So, the distance between the fasteners is 50-55 cm. Shelves are placed on the placed metal supports. The entire wooden-metal structure can be painted, or wooden shelves can be varnished, and metal shelves can be painted to match the rest of the room.

Shelf for flowers from the windowsill

To do this, you need a plastic window sill 3.90 m long, nickel-plated pipes (3 pcs.), Fasteners (flange) - 3 for each shelf, brackets - 2 pcs.

Manufacturing technology:

1. An ordinary window sill is cut into pieces of 1.3 m.

2. In the resulting blanks, 3 holes are made at the same distance: 2 along the edges at the rear wall and 1 in the center at the front.

3. The pipes are cut to the required height. using flanges and screws, they fasten the entire structure.

4. The lower edge of the pipes is fixed to the floor with the same flanges in 3 places. Brackets are put on the upper edge of two pipes located at the wall and are also attached to the wall with screws.

Corner rack for flowers

This design is most simple to make from chipboard and the same nickel-plated pipes. You will need only 3 pipes of the length you need, several identical shelves cut with a jigsaw according to the scheme (triangular shape) and the number of flanges and screws corresponding to the number of shelves. Everything is assembled according to the technologies specified above. Measure seven times - cut one. At the top, the shelf is attached to the walls with brackets. For fixing, it is enough to place the brackets on the two outer corners.

Glass flower rack

Such a device is convenient in that if you place the backlight on top, then the light will penetrate all the shelves. You can make such a glass shelf using two wooden slats and 6 glasses. Of course, the material of the shelves is tempered glass with a thickness of at least 5 mm. Vertical slats can be made of wood. The size of the groove, which is made for fastening the glasses, and, accordingly, the strength of their fastening depends on their thickness. For shelves with a thickness of about 20 cm, the grooves should be about 10 cm. This means that the thickness of the slats should in no way be less than 20 cm. There may be other proportions, but they are more suitable for placing souvenirs and various trifles on such shelves. Flower pots weigh a lot, and if there are several of them, then pressure is created on the entire structure. In the design described above, one of the shelves at the bottom can be replaced with a wooden one.

Plasterboard shelves for flowers

Many options for shelves and shelving are available in drywall. These can be either niches in the wall or ordinary shelves. In both the first and second cases, a frame is built, which is sheathed with drywall. From a decorative point of view, such a design is very beneficial, but from a practical point of view, it does not. Flowers are water and it is impossible to guarantee 100% that moisture does not get on the material that deteriorates from it. Therefore, one of the options is to attach glass shelves to the plasterboard frame. This design will look very advantageous with backlighting.

As you can see, there are so many options for flower racks. Photos clearly demonstrate that there is no limit to human imagination. Whatever material falls into the hands of the master, strong and beautiful flower racks can be obtained from it.