The floor covering must meet many requirements: aesthetics, environmental friendliness, maintainability. In this case, the dilemma - which is better than a parquet board or a solid board - is a frequent occurrence. Both materials are beautiful, durable and clean. The article is assessed by experts, on the basis of which the final choice can be made.

The floor covering must meet many requirements: aesthetics, environmental friendliness, maintainability. In this case, the dilemma - which is better than a parquet board or a solid board - is a frequent occurrence. Both materials are beautiful, durable and clean. Below is an assessment by specialists, on the basis of which the final choice can be made.

Features of parquet

The parquet board is a multi-layer unit. All stabilizing and decorative layers are bonded together with glue. Front covering - varnish, oil, wax. Read more in the article "What is a parquet board".

The advantages of the material are as follows:

• Strength. Due to the layers laid perpendicular to each other, linear expansion, pressure and climate change affect the parquet to a lesser extent.
• Do-it-yourself affordable styling methods. Boards can have tongue-and-groove joints. With them, a floating floor is created, which, on occasion, can be dismantled without damage.
• The beauty. The natural pattern of noble woods is emphasized by a matte or glossy composition that emphasizes or sets off natural colors. The artistic options are worthy of the reception halls.

With proper care, the restoration of the parquet takes place with minimal changes - in its original form, it will last a long time.

Consider the disadvantages in order to decide which is better solid or parquet board:

• The parquet is environmentally friendly, as the layers are natural wood. But the glue cannot meet this condition. In addition to it, an assembly compound for adhesion to the floor is also used. Therefore, it is important to always remember about the chemical constituents of parquet boards.
• The service life of the parquet is 1.5 times lower than that of the array.

Parquet remains at the peak of popularity among other noteworthy floor coverings. If you use the raw materials wisely: choose the optimal installation option, provide timely care, carry out preventive maintenance, the floor will delight you with its splendor for a long time.

Features of a solid board

The material is a solid piece of wood without delaminations and inclusions of synthetic raw materials - in detail "What is a solid board".

Advantages:

• Complete ecology.
• Strength. Due to the thickness, the service life of the board reaches 70 years. In addition, timely procedures - sanding, sanding - prolong the original appearance of the natural floor covering.
• Heat capacity. Solid wood floors do not need warm systems.

disadvantages

Which is better: parquet or solid wood?

To determine the choice of flooring, it is important to consider the behavior of the boards in real use. Many factors matter: the building material of the house, the activity through passage, the willingness to care for the floor in accordance with the rules, and so on. Let's start:

Stability

The concept defines the initial appearance of the coating over time. The massive board wins. It has great thickness and weight. Therefore, it will successfully withstand changing loads. Squeaks and shifts in the array occur later - for a parquet board, the problem can begin immediately after installation, if the work is carried out without proper control.

The appearance of the parquet is preserved if special care is taken.

Solid wood board is undemanding to detergents, but likewise does not accept excess moisture. Over time, massive wood floors are painted. It is not recommended to do this with parquet - sanding, sanding and other manipulations are required.

It is not forbidden to lay parquet in apartments, but for this it is important to choose the right room without aggressive environments. Parquet board does not spread in children's rooms - constant activity and the risk of spilling or dropping something is high. Her prerogative is living rooms, halls, offices. The array is unpretentious only if a certain breed is selected. For example, larch is successfully put in bathrooms and saunas, where it is absolutely inert to moisture.

True, such varieties are high in cost. The rest of the wood suffers from longitudinal cracks - this feature is absent in parquet.

House building material will also affect wood floors. Bricks and stones are capable of creating dampness inside, which is detrimental to wood. The massif will be the first to be hit, the parquet is more stable. Both coatings require moisture control.

Maintainability

Due to the thickness, scrap the array, perhaps 7–8 times. Nevertheless, the problems of a solid floor appear more often due to the structure of the board - longitudinal cracks, large gaps. To replace the floorboard, you will have to open the adjacent boards to the wall, otherwise the looseness will not disappear.

Over time, solid wood floors are painted, as cracks have to be putty

Parquet requires careful handling, its thickness allows to carry out the cleaning procedure 3-5 times. Sand, heels, animal claws can ruin the coating. Inlaid or artistic parquets are restored only by professionals. Simple installation will allow you to make repairs yourself without dismantling the entire coating, while maintaining the appearance of the floor.

Price

Definitely, it is impossible to name the difference between a parquet board and a solid board in terms of price. The cost depends on many factors: the species and type of wood, the method of installation, the number of boards, related materials - their purchase is necessary. It is necessary to take into account the price of the work - it is difficult to lay a parquet board, as well as an array correctly. It is important to focus on the quality of the material.

conclusions

So, what is the difference between a solid board and a parquet board? To many. Which one to prefer? Consistent with purpose and finance. Is an array definitely better? Only for some of the indicators described. Solid wood takes the lead in practicality, parquet takes the lead in aesthetics. You decide.

If you find an error, please select a piece of text and press Ctrl + Enter.

What the flooring will be like is one of the first questions that we have to solve when renovating any room. Many people want the kitchen floor to be wooden, so it is important for them to know which is better - parquet or laminate. Each material has its own advantages and disadvantages.

The parquet board looks impressive and solid, adding restrained nobility to the atmosphere

Parquet board - prestige, quality, reliability

Many people think that laminate flooring is more suitable for offices. People who prefer quality things and can afford to buy expensive flooring choose parquet. For the price, it is much more expensive than any laminate.

Many people confuse the concepts of parquet and parquet board. The parquet board consists of three layers. The bottom layer is coniferous veneer (layer thickness is about 2 mm), the second is wooden planks, which are laid perpendicular to the upper and lower layers. There are also extreme locking lamellas here. It is due to them that the parquet is laid so quickly. The top layer of the parquet board is valuable wood (oak, ash, birch, beech). Block parquet is made of the same wood. The attractiveness and durability of the parquet board depends on the top layer. It is impregnated with special solutions that help preserve the beauty of the parquet board for several (or even many) years.

Attractive natural wood pattern enhances the decorative possibilities of the parquet board

People appreciate wood for its naturalness and warmth. It warms even the minimalist interior. Features of wood species, unlimited possibilities of laying parquet boards, new technologies for the production of this material significantly expand the artistic possibilities of parquet. The wood floor is cozy and warm. But when varnished in several layers, the natural comfort disappears. To preserve this most valuable property of a parquet board, it is recommended to use wax or oil instead of varnish as a coating. They do not hide the beauty of the tree, they leave the texture natural. The oil cover is renewed every few years.

The parquet board has a complex structure that improves the technical characteristics of this type of flooring

Parquet board by design can be single-strip, two-strip and three-strip. Plank parquet has a solid wood plank top layer so you can see the wood pattern. In a two- and three-strip parquet board, the top layer consists of two or three rows of lamellas, which can be of different lengths, so the pattern looks unusual. Such a parquet board does not outwardly differ from a parquet laid with a deck pattern. There are also such models that imitate block parquet, laid with "wicker" or "herringbone". As for the pattern of the top layer of the parquet board, it depends on the cut, and can vary from striped uniform to variegated with veins and knots. A wide variety of types of wood and options for its processing allows you to choose a parquet board of any color.

Parquet board, like laminate, is a ready-to-install material. The parquet board is sanded, varnished and protected. Laying both laminate and parquet is quite simple, and the floor can be disassembled and reassembled if necessary.

Laminate - ease of care, durability, attractive price

Laminate is one of the common floor coverings. Relatively recently, it replaced the parquet board and made it a worthy competitor. Over the past few years, laminate technology has evolved so much that the coating can compete with many other varieties. Unlike parquet, laminate does not require sanding, impregnation and varnishing, it does not change color when exposed to sunlight, the floors can be washed using chemicals for cleaning the laminate. As you can see, the cover gives the hostess little worries.

Laminate has its own advantages and advantages, first of all, a wide variety of textures and shades.

Laminate is not afraid of sun rays, frequent washing and mechanical damage to the surface. Stains can be removed with acetone or any product with a high alcohol content, and if you clean the room every day, you can do with a regular damp cloth or vacuum cleaner. Scratches, if minor, can be masked with a repair pencil or putty. The laminate floor is afraid of one thing - excess moisture, although there is also a moisture-resistant laminate. If you take proper care of the coating, it will last a long time and will remain as smooth and beautiful as on the first day after installation.

As mentioned, installing laminate flooring is fairly straightforward. It all depends on its lock (fastening), the condition of the floor in the room. The fastest way is to install the laminate with a “click” glueless lock, since no glue or special tools are required for installation.

What is the difference between laminate and parquet board

Laminate and parquet are the most popular floor coverings. Both guarantee a reliable and durable floor at an affordable price. Sometimes laminate and parquet boards are so similar in appearance that it can be difficult for a person who has nothing to do with construction to distinguish between them. What is the difference between a laminate and a parquet board?

• Mode of production

The parquet board consists of three layers of veneer, while the lower layers are cheaper raw materials, and the upper layer is high-quality materials. Laminate flooring can be compared to photowall-paper, which is glued to a multi-layer fibreboard.

• Floor covering appearance

As for the appearance, the laminate is most often decorated with a parquet board. But the drawing on each board is identical, which cannot be said about the parquet board. You will not find two identical planks here, since the pattern is identical to the wood structure. In addition, there is a laminate with a pattern "marbled", "under the tiles" on sale.

The parquet board, like the laminate, is made so that its installation does not cause any difficulties

Laminate is considered a more practical material. It is resistant to abrasion, it is quite difficult to damage it with shoes or furniture. Parquet board requires careful attitude to itself. The enemies of this flooring are heavy furniture, heels, changes in humidity and temperatures, so think carefully about whether to lay a parquet board in the kitchen. When comparing laminate to hardwood flooring, laminate flooring may appear to be a colder material than hardwood flooring. It is also believed that laminate flooring is noisier (passes noise, footsteps are clearly audible). But these disadvantages can be avoided by using modern means for sound insulation - special substrates for laminate or parquet. Substrates are made of 2 mm thick polyethylene and natural cork. Cork backing is more expensive because cork is a natural material that is considered more sustainable. The underlay is not nailed to the floor, but simply placed on top of it before starting work.

• Care features

If you decide to make a parquet floor in your kitchen, immediately purchase special care products. The mop you use to clean the floors should only be slightly damp, and the steam function should not be used in the vacuum cleaner. Laminate is also sensitive to moisture, but to a much lesser extent than parquet. It is not recommended to use household chemicals in the process of washing the floor.

• Service life of laminate and parquet boards

In appearance, parquet board seems to be a fragile coating, but with proper care it can last up to 30 years. It is possible to extend the life of a parquet board due to restoration and grinding, but these procedures can be done about 4 times for the entire period. Laminate flooring lasts from 7 to 20 years. A coating with a high wear class lasts longer. Prolongs the life of the laminate and ensures proper maintenance.

• Floor covering price

The simpler structure of the laminate affects the price, but not the quality.

A high-quality laminate is not much inferior in price to a parquet board, therefore, when deciding whether to purchase a particular floor covering, be guided by its properties and take into account the characteristics of the room for which this covering is intended.

Deciding on the choice of flooring

It turns out that the parquet board is more durable. Its surface can be renewed. Laminate in the middle price category lasts no more than 8 years. Craftsmen have come up with ways to restore the laminate, but the method is quite expensive. It's easier to buy a new coating, at the same time changing the color.

What some consider to be a disadvantage of laminate flooring, others recognize it as a virtue. The material, of course, in comparison with the parquet board, is short-lived, but there is also a positive moment in this: it is not a pity to part with it. Abroad, where people change apartments and offices quite often, this material is very popular. Laminate is not afraid of ladies' hairpins, rollers on which your children may want to ride around the house, metal car models. Laminate can be laid even where you most likely would not dare to lay a parquet board (in the kitchen, for example).

A few words about laying parquet and laminate flooring

Laying the laminate, like parquet boards, should be carried out according to the principle "if you don't know how, don't take it." In any case, the coating brought from the store must be brought into the room and left for at least two days, so that the material "settles", gets used to the humidity and temperature of the air in this room.

For laying laminate and parquet boards, it is better to invite professional flooring craftsmen, and not folk craftsmen who lay quickly, crookedly, inexpensively. In terms of laying, laminate is a rather capricious material, and there is only one chance to lay it correctly. It is not glued to the floor, but laid in a "floating way" - the boards are connected to each other using the "thorn-groove" method. Therefore, laminate flooring is very easy to remove. One thing is bad - he is removed once and for all. If you removed the laminate, you will no longer be able to put it in another room.

Manufacturers have made sure that the work on laying the floor covering is simple and not particularly laborious.

If you have invited laminate flooring masters, make sure that they do not glue the boards to the floor, especially with PVA glue. The laminate will first swell, then shrink. If you really need to use glue, let it be a special glue that is produced specifically for laminate flooring. Also, make sure that the craftsmen do not put the boards parallel to the window. The light from the window must fall parallel to the boards, otherwise the joints will be noticeable.

If the floor is uneven, it must be leveled before starting the installation.

Let's summarize:

• Parquet board requires special care conditions. Laminate is not afraid of temperature changes and mechanical stress.
• Natural wood is used for the manufacture of parquet boards, and synthetic materials are used for the laminate.
• Laminate designs are much more varied.
• The floor on which the parquet board is laid is beautiful, warm and quiet.
• Parquet board lasts much longer.
• Laminate is usually cheaper than parquet.

The warmest and no less durable floor coverings with proper care are natural wood products. In this article we will compare products such as solid wood and multi-layer parquet, weigh the pros and cons, and choose the best.

A large-format floor covering made up of two or three layers of wood segments perpendicular to each other is called a parquet board. It is considered the most successful analogue of traditional parquet. Formed from the following layers:

Upper protective

Varnish (polyurethane, alkyd, acrylic, mixed) or oil-wax compositions. The composition is applied to the surface to ensure wear, dirt and moisture resistance of the coating, to maintain its attractive appearance.

To give the surface an interesting texture, various processing techniques are used (brushing, bleaching, smoking, and much more). According to the compositional composition, one-, two- and three-lane products are distinguished.

A cut of a valuable species of wood

A thin layer of traditional oak, ash, maple or exotic zebrano, mahogany, jatoba and others. Section - from 2 to 6 mm, multiple restoration of the floor by grinding is allowed (1-4 times).

Carrying base

A layer of spliced ​​wood with a thickness of 6-9 mm. It is formed exclusively from renewable technical rocks, the direction of the fibers is perpendicular to other layers.

Stabilizing bottom

Cut of solid wood of coniferous varieties 1-4 mm. Purpose - ensuring the stability of the parquet board to deforming loads, as well as leveling internal stresses.

As a rule, a parquet board is a plank up to 30 cm wide, up to 2.6 m long and up to 20 mm thick. The assembly is carried out using tongue-and-groove or snap locks, can be laid on glue, hardware, or in a "floating" way using a substrate.

Solid board characteristics

A lamella made of solid homogeneous wood is called a solid board. In fact, this is a large-format analogue of block parquet, made from such species as oak, teak, merbau, wenge, paduk, walnut, bamboo, etc. Structurally distinguish:

• Working face layer or a layer of wear. This is the name of the depth of the array from the surface to the castle. Its thickness ranges from 5 to 12 mm and determines the service life of the product, as well as the number of restorations. The "face" of the array can be smooth, planed, brushed, chamfered, etc. Lacquer or oil-wax compositions are used as protection.
• Bottom face- this is the supporting base of a massive board with a section of up to 17 mm.

A tongue-and-groove or mixed type is formed along the perimeter in production. In the first case, a classic tongue-and-groove connection is cut. In the second, the spike-groove is supplemented with special plastic or rubber inserts, which allows the array to be used in wet rooms and even to be used for outdoor work (terraces, open balconies).

The most stable solid board is considered to be an oak product. No less in demand are the classic water and weather resistant species - ash, teak, robinia. Plank sizes:

• Length - 40-220 cm;
• Width - 10-25 cm;
• Depth - 14-25 mm.

Packages are formed in two ways:

1. From stable boards of the same size range;
2. From the slats of different lengths, that is, in a pack (not each), lamellas of 40 and 120 cm can be found. This is convenient, since the short ones can be used as extreme ones when laying, which reduces the amount of waste.

A good manufacturer always indicates that the recommended installation method is glue with a plywood base.

Assembly with fasteners is allowed. An independent or "floating" method of laying is possible only on small areas (up to 4 running meters) and with large gaps (at least 15 mm). But at the same time, the factories disclaim responsibility and do not carry a guarantee for such a parameter as the service life of the coating. This is because the solid board is capricious to the operating conditions:

• Temperature from +18 to +26 ° С;

Failure to comply with the above parameters may form not only gaps between the boards. More critically, the plank may crack.

Parquet board or solid board: which is better

To determine the winner of the "competition" will help a comparison of the two finishing materials in terms of consumer properties. For clarity, all information is summarized in a single table.

Characteristic		Parquet board
Structure	Single layer, full thickness valuable wood.	Two- or three-layer, valuable rock - only the upper layer with a cross section of up to 6 mm.
Dimensions: Length Width Thickness
Appearance	The shade and texture of natural single-strip wood, the pattern is not repeated. Variations in the types of selection (radial, tangential, etc.) and surface types (rustic, brush) are possible.	Presentable natural appearance of 1, 2 and 3-strip timber. The texture is heterogeneous, differing in breeding and finishing characteristics.
Wear resistance	For varnished coatings - up to 50 years, under oil or wax - up to 20 years.	For varnished coatings - up to 30 years, Treated with oil-wax compositions - 10-15 years.
Service life guaranteed by the manufacturer	On average, 30 years or more.	About 15-25 years old.
Maintainability	Small defects, deep scratches and cracks are repaired with repair waxes or fillers. It is difficult to replace a damaged bar, but it is possible with the use of special equipment.	Minor surface damage can be removed with restorative agents. The detached parts can be glued back. In case of serious defects, it is allowed to replace the damaged lamella with a new one.
Renovation	Grinding up to 10 times	Grinding up to 4 times
Heat capacity Thermal conductivity	High. From 200 mW / (m * K).	Average. From 150 mW / (m * K).
Density of the product	From 880 to 1000 kg / m 3	Approximately 700-850 kg / m 3
Water resistance	Yes, for selected species (teak, thermo ash, pressed bamboo).	No.
Mounting	Glued on a screed or fastener using plywood as a base.	"Floating" (the most budgetary). For hardware.
Care	Wet and dry cleaning. Restoration of oil or wax protection every 2-3 years.
Operational Requirements	t = 18-26 ° C; Relative air humidity 40-60%. Average level of resistance to atmospheric changes.	t = 18-27 ° C; Relative humidity 30-60%. High level of resistance to climatic changes.
Interaction with the "warm floors" system	It is undesirable, since it is difficult and long to heat up 2 cm of dense solid wood, it is better to use traditional heating systems.	It is used on water, infrared "warm floors" and sets of soft electric heat (Devicel Dry, etc.).
Cost, from	2300 rub / m 2	1400 rub / m 2

So, in almost all parameters, except for the price, everything speaks in favor of a solid board. It is stronger, warmer, more reliable and more durable than multi-layer parquet construction. At the same time, the latter is cheaper, easier to install and repair, and can be used over underfloor heating systems.

If funds allow, it is better to choose an expensive and time-tested array for a house. Parquet board is good as a more affordable, but no less beautiful and hygienic analogue.

Advice! If you need repairmen, there is a very convenient service for their selection. Just send in the form below a detailed description of the work that needs to be performed and you will receive offers with prices from construction teams and firms by mail. You can see reviews of each of them and photos with examples of work. It is FREE and non-binding.

Material

Advice! When choosing, you should pay attention to the total repair budget. If the renovation is "budgetary", then the laminate will be more than enough. If the repair is done expensive, good-quality and for many years, then you should think about a parquet board.

Parquet board and laminate in everyday life

In everyday life, these two types of coating manifest themselves in a completely opposite way.

Parquet board:

Good noise isolation

Warm material

It is easy to push through with heels and scratch the varnish while moving furniture

Cold enough

Soundproofing requires a special underlay

More resilient to external influences

Important! Laminate flooring should not be overestimated. When sharp or heavy objects fall on the laminate, it is quite easy to chip.

When choosing a coating, first of all, it is worth finding out the purpose of the room. If this is an office or a walk-through room, laminate flooring will be more appropriate. For, a parquet board is more suitable.

Care

Parquet board is a rather capricious material in terms of care. Does not like temperature extremes and high humidity. For cleaning, special means for caring for the parquet board are used, which will not have much, but still spend money. In addition, from time to time it needs to be opened with varnish or.

Laminate is also not very fond of moisture, but this only applies to moisture in large quantities, it is better not to pour a bowl of hot borscht on it, rather everything will swell at the seams.

But it is much easier to care for the laminate - a well wrung out cloth and warm water are enough.

Durability

Despite the fact that the parquet board is very capricious to care for, its biggest plus is its durability. A good parquet board, the care of which is sustained in accordance with all the rules, will last more than one or two decades.

Also a big advantage is the fact that it is a natural material.

Info! When the look is frayed and worn, the parquet board can be varnished or oiled and it will be as good as new. Almost like with parquet, except that the number of sanding and scraping is limited by the manufacturer (about 3 times), then you will already erase the top layer.

Laminate in this sense is very inferior to parquet board. In the best case, it can last 10-15 years (depending on the class, sometimes more). If necessary, you can change individual boards, but for this you need to disassemble the floor, which is not a very convenient option in a living room. It is impossible to restore the entire laminate flooring, only a complete replacement of the floor.

Eco-finishing involves the use of natural (natural) materials for all types of surfaces, including the floor. Which is better than parquet or parquet board? - this question is asked by many. The use of any of the listed materials has its positive aspects and nuances. To determine, consider the characteristics, features of the use of these floor coverings.

For many, these materials are of the same type. In fact, the difference between parquet and parquet board is significant even in terms of design features. The first is a solid block of valuable hardwoods: oak, maple, beech, ash, cherry, pear, etc. And the parquet board has a three-layer structure. The middle fibers are perpendicular to the top and bottom layers. For the front part, expensive wood is used, for the other two, less expensive, but high-quality canvases, usually conifers. The design affects the characteristics of materials.

Parquet advantages:

• Durability. For production, hard woods are used.
• Aesthetics. Unique natural shades in the cut of one type of wood allow you to lay out beautiful patterns.
• Ease of repair. Carried out on site without parsing the coating.
• Unlimited number of times the possibility of surface scraping.
• Environmental friendliness. Natural origin speaks for itself.
• Strength. Resistant to mechanical stress.
• Heat capacity. This surface is always warm to the touch.
• Increased sound insulation properties.

The disadvantages include: high cost, the requirement to maintain a constant microclimate (wood is afraid of moisture and too dry air), the complexity of installation.

The advantages of a parquet board:

• Simplicity of styling. The panels are fastened with a lock connection. No scraping, no work with varnish required.
• Environmental friendliness. Natural fibers are used for production.
• Ability to dismantle several times without losing the quality of the material.
• Not as sensitive as parquet to changes in the indoor climate.
• Variety of assortment.
• In comparison with parquet, the price is not so high.

The disadvantages include:

1. Weak resistance to mechanical stress;
2. Limited amount of scraping repairs. According to the technology, the finishing layer is only up to 4 mm.
3. Reduced moisture resistance. It is solved with the help of additional processing during installation.

Useful video: Advantages and differences between parquet boards and parquet

Considering the pros and cons of each material, it is clear that parquet differs from parquet board in durability, strength, installation. Care is an important factor when choosing a coating.

Comparative characteristics of flooring

To determine the material for the finishing layer, consider the differences. When comparing floor coverings, attention is paid to three main indicators.

Features of processing and care

Both materials are afraid of direct exposure to water. The parquet floor from liquid, humidity rises, dries up and returns to its normal appearance. The finishing layer peels off with the parquet board, and this is already replacing the canvas.

Afraid of a sharp change in the microclimate. We'll have to maintain a humidity of 60%, the temperature in the range from 15 to 20 ° C. The board has factory protection, which makes it resistant to changes in microclimate.

For parquet, it is important to apply special care products once a quarter. For boards, the period is longer. During repairs, the parquet is cycled without dismantling. In case of major changes, the board will have to be dismantled before repair. The rest of the care for the coatings is the same.

Which is easier to stack and dismantle

Both types of material require a flat surface, this will increase the life of the coating. It is better to provide waterproofing for the floor. Installation is done with technical gaps from the walls, since natural fiber changes its linear dimensions under the influence of the microclimate.

Parquet laying is difficult, it is done in several stages. First, a test pattern is laid out with a combination of bars. Then, installation begins with the help of glue, which is selected based on the material of the finish and the base. The solution is applied to the spike, groove, subfloor. After laying, factory defects are eliminated by scraping by grinding. Finishing work consists in varnishing the surface. The number of layers is from two and more. The larger the quantity, the more voluminous the pattern of the parquet. Each hardened layer is sanded. It is difficult to remove the coating without damaging the bars.

Useful video: Laying block parquet

Parquet board is much easier to install. There are two ways of adhesive and locking. The second is more popular. For reliability, the locks are treated with wax before installation. This will provide greater resistance to moisture. carried out in a takeoff run. The second row is shifted in length relative to the first. After laying, no scraping, sanding, or a long varnishing process are required. The front part of the panels already has a protective factory layer. Depending on the type of lock, you can remove the parquet board up to 6-8 times without damaging the canvases.

Useful video: Instructions for laying parquet boards

Such differences between parquet and parquet boards significantly affect the size of the installation budget. For the first option, you will need to hire a professional for high-quality installation. And laying a parquet board at home with your own hands is quite feasible and does not require additional costs.

Floor Covering Price Review

The cost of a piece parquet starts at 200 rubles / sq. m. (ash), more expensive tree species 10,000-16,000 rubles / sq. m. Do not forget about the additional costs of work, material for the protective and topcoat. Issue price from 650 rubles / sq. m.

Parquet board, depending on the technical characteristics, is in the range from 1200 to 4000 rubles / sq. m. Work will cost from 200 rubles / sq. m. The cost of laying can be avoided if you do it yourself.

According to the three listed parameters, the main disadvantage of parquet is determined - the high cost of material, installation, maintenance. Therefore, such coverage has always been considered a sign of wealth.

Conclusion

Everyone decides for himself what to choose parquet and parquet board. An important point is the cost complex of three parameters: material, installation, maintenance. If the parquet board lies in the middle price segment, and laying, maintenance, repair is quite feasible with our own hands, then parquet is an expensive coating in all respects. A professional is required for high-quality installation, maintenance, repair. And these are additional significant costs. But no laminate or parquet board will convey the depth, texture, volume inherent in block parquet.