Road worker etc. Job description of a road worker Description of work, tasks and job responsibilities

Road worker 2nd grade

Description of works.

1. Manual cleaning of substrates and coverings from snow, dirt and dust.
2. Transfer of sand, gravel and crushed stone.
3. Watering of foundations and floors.
4. Cleaning and lubrication of the surface of the rail forms during the construction of cement-concrete pavements.
5. Backfilling of cement-concrete pavements with sand.
6. Manual cleaning of road signs and elements of the route.
7. Distribution of road-building materials during the construction and repair of road bases and pavements.
8. Cleaning the trough by hand after excavating machines.
9. Undermining of rail forms.
10. Manual disassembly of substrates, coatings and curbs.
11. The device and repair of a solid mat.
12. Screening of sand, gravel and crushed stone by hand on portable screens.
13. Manual shoulder planning.
14. Pouring of binders by hand.
15. Reception of the mixture from a dump truck with cleaning the body when installing concrete pavements.
16. Trimming the edges of fresh concrete.
17. Manual ramming of places inaccessible for mechanized rolling.
18. Harvesting of stone blocks and pakelazh.
19. Sorting of stone and packing.

Must know:

Types of basic road building materials, pavement structures and artificial structures on the roads;
- methods of preparing asphalt concrete, cement concrete, bitumen-mineral and other mixtures;
- techniques for dealing with ice and snow drifts;
- Traffic Laws.

Road worker 3rd grade

Description of works.

1. Arrangement and profiling for rolling on beacons, lighthouse rails, templates of road bases made of sand, sand cement, gravel, crushed stone.
2. Profiling of unpaved and unpaved improved roads.
3. Installation of road signs.
4. Arrangement and repair of drainages.
5. Patching of improved dirt roads, gravel, crushed stone surfaces, as well as repair of dirt roads with separate maps.
6. Dismantling of road surfaces and foundations using a mechanized tool.
7. Arrangement and repair of matting in a cage.
8. Arrangement of foundations for laying the side stone.
9. Construction and restoration of ditches, drainage and upland ditches in compliance with longitudinal slopes and transverse profiles.
10.
- determination of control points for the subsequent application of marking lines by machine;
- drawing the lines of the pedestrian crossing manually using a template.
11. Installation and removal of guards and cones.
12. Production of works using paints and varnishes.

Must know:

Basic properties of road building materials;
- rules for the construction and repair of unpaved and unpaved improved roads, sidewalks and foundations for asphalt concrete and cement-concrete pavements;
- rules for the use of mechanized tools used in the construction and repair of roads;
- Techniques for disassembling and trimming coatings and bases using a power tool;
- methods of elimination of destruction and restoration of pavement;
- Techniques for preparing bases for rail-forms during the construction of cement-concrete roads;
- the basics of the drainage arrangement.

When performing work on the marking of the road surface of highways:
- types of road markings and rules for their manual application, rules for performing work on roads without closing traffic, rules for fencing workplaces during work;
- the main properties of paints and varnishes.

Road worker 4th grade

Description of works.

1. Arrangement and profiling of crushed stone and gravel pavements manually according to beacons, lighthouse rails and templates.
2. Repair of crushed stone, gravel surfaces with separate maps.
3. Final leveling of the road surface after leveling by machines.
4. Installation of a curbstone.
5. Installation of beacons and lighthouse rails.
6. Arrangement of a preparatory layer of crushed stone or gravel for the foundations of supports and pipes.
7. Removal of atmospheric precipitation from roads and man-made structures.
8. Finishing and repairing the edges of the seam and surfaces of cement concrete pavements.
9. Arrangement and maintenance of barrier and cable fences.

- preliminary marking of control points according to the traffic organization scheme;
- assembly and installation of templates;
- application of marking material using a spray gun;
- demarcation of old markup;
- participation in work during road marking with road marking machines;

Must know:

Requirements for the quality of materials used in the construction and repair of roads;
- rules of concreting in winter and methods of heating concrete;
- rules for the construction and operation of road pavements, artificial structures and track conditions.

When performing work on the marking of the road surface of highways:
- the main properties of paints and varnishes;
- requirements for the quality of materials used for marking;
- types of horizontal and vertical markings, the order of their application;
- rules and methods of work when applying markings with a spray gun using stencils;
- consumption rates of marking materials;
- requirements for the quality of work performed;
- markup rules;
- rules for performing work in conditions with partial closure and without closure of traffic.

Road worker 5th grade

Description of works.

1. Elimination of places of road surface subsidence.
2. Installation and repair of pipes, trays, heads, retaining walls and parapets.
3. Correction of individual damage to elements of the architectural design of highways.
4. Stakeout of picketage and road elements in plan.
5. Determination of elevation marks of road structures using a geodetic instrument.
6. Arrangement and repair of drains and paving with restoration of filters.
7. Installation of fencing and signaling devices. Consolidation of developing foci.
8. When carrying out work on the marking of the road surface of highways:
- drawing of lines of a pedestrian crossing of the "Zebra" type with paints and thermoplastic materials;
- designation of islands dividing traffic flows in opposite directions, on a stencil using spray guns;
- drawing arrows indicating the direction of movement along the lanes, two-component plastics, retroreflective elements with a pneumatic pistol, marking the vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets;
- production of works using paints and varnishes.

Must know:

Methods for assessing the condition of road surfaces and artificial structures;
- device and rules for using a geodetic instrument;
- methods of combating soil erosion;
- ways to eliminate ice on the roads.

When performing work on the marking of the road surface of highways:
- the main types and properties of paints, solvents and thermoplastic materials, methods for determining their viscosity and fluidity;
- methods of applying paints and varnishes;
- dimensions of lines, arrows and horizontal markings;
- the procedure for applying markings in combination with road signs or traffic lights;
- technical requirements for road markings;
- rules for applying marking materials in combination with reflective elements;
- device and principle of operation of a mechanized tool for applying thermoplastic materials;
- composition and technology of applying two-component plastic materials.

Road worker 6th grade

Description of works.

1. Installation of precast concrete road and airfield slabs.
2. Installation of steel and cast iron plates.

Must know:

Methods, techniques for assembling and fastening prefabricated reinforced concrete road and airfield slabs;
- Methods and techniques for mounting steel and cast iron plates.

Secondary vocational education is required.

The professional standard for the profession Road worker is.

I APPROVE:

________________________

[Job title]

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Road worker of the 3rd category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of a road worker of the 3rd category [Name of the organization in the genitive case] (hereinafter - the Company).

1.2. A road worker of the 3rd category is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. A road worker of the 3rd category belongs to the category of workers and reports directly to the [name of the position of the immediate supervisor in the dative case] of the Company.

1.4. A road worker of the 3rd category is responsible for:

timely and high-quality performance of tasks for their intended purpose;
compliance with performance and labor discipline;
compliance with labor safety measures, maintaining order, compliance with fire safety rules at the assigned work site (workplace).

1.5. A person with secondary vocational education in this specialty and work experience of at least 1 year is appointed to the position of a road worker of the 3rd category.

1.6. In practice, a road worker of the 3rd category should be guided by:

local acts and organizational and administrative documents of the Company;
internal labor regulations;
rules of labor protection and safety measures, ensuring industrial sanitation and fire protection;
instructions, orders, decisions and instructions of the immediate supervisor;
this job description.

1.7. A grade 3 road worker should know:

basic properties of road building materials;
rules for the construction and repair of unpaved and unpaved improved roads, sidewalks and foundations for asphalt concrete and cement-concrete pavements;
rules for the use of mechanized tools used in the construction and repair of roads;
techniques for disassembling and trimming coatings and bases using a mechanized tool;
ways to eliminate damage and restore pavement;
methods of preparation of bases for rail-forms during the construction of cement-concrete roads;
drainage basics;
types of road markings and rules for their manual application, rules for performing work on roads without closing traffic, rules for fencing workplaces during work;
the main properties of paints and varnishes.

1.8. During the period of temporary absence of a road worker of the 3rd category, his duties are assigned to [the name of the position of the deputy].

2. Job responsibilities

A road worker of the 3rd category carries out the following labor functions:

2.1. Arrangement and profiling for rolling on beacons, lighthouse rails, templates of road bases made of sand, sand cement, gravel, crushed stone.

2.2. Grading of unpaved and unpaved improved roads.

2.3. Installation of road signs.

2.4. Installation and repair of drainages.

2.5. Patching of improved dirt roads, gravel, crushed stone surfaces, as well as repair of dirt roads with separate maps.

2.6. Dismantling of road surfaces and foundations using a mechanized tool.

2.7. Arrangement and repair of matting in a cage.

2.8. Arrangement of foundations for laying side stone.

2.9. Construction and restoration of ditches, drainage and upland ditches in compliance with longitudinal slopes and transverse profiles.

2.10. When performing work on the marking of the road surface of highways:

determination of control points for the subsequent application of marking lines by machine;
drawing the lines of the pedestrian crossing manually using a template.

2.11. Installation and removal of guards and cones.

2.12. Production of works using paints and varnishes.

In case of official necessity, a road worker of the 3rd category may be involved in overtime duties, in the manner prescribed by law.

3. Rights

A road worker of the 3rd category has the right:

3.1. To get acquainted with the draft decisions of the management of the enterprise concerning its activities.

3.2. Submit proposals for improving the work related to the responsibilities provided for by this job description for the management's consideration.

3.3. Inform the immediate supervisor about all deficiencies in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.

3.4. To request, personally or on behalf of a direct supervisor, from the heads of departments of the enterprise and specialists, information and documents necessary for the performance of their official duties.

3.5. To involve specialists from all (individual) structural divisions of the Company in solving the tasks assigned to him (if this is provided for by the provisions on structural divisions, if not - with the permission of the head of the Company).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. A road worker of the 3rd category bears administrative, disciplinary and material (and in some cases stipulated by the legislation of the Russian Federation - and criminal) responsibility for:

4.1.1. Failure to comply or improper fulfillment of the official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of his labor functions and the tasks assigned to him.

4.1.3. Misuse of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Assessment of the work of a road worker of the 3rd category is carried out:

4.2.1. Immediate supervisor - regularly, in the process of the employee's daily performance of his labor functions.

4.2.2. The attestation commission of the enterprise - periodically, but at least once every two years, based on the documented results of the work for the evaluation period.

4.3. The main criterion for assessing the work of a road worker of the 3rd category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The working hours of a road worker of the 3rd category are determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with production needs, a road worker of the 3rd category is obliged to go on business trips (including local ones).

Acquainted with the instructions __________ / ____________ / "____" _______ 20__

Added to the site:

1. General Provisions

1.1. The road worker is a worker and reports directly to

_______________________________________.

(name of the manager's position)

1.2. A person with secondary vocational education is hired (transferred) to work as a road worker of the 6th category.

1.3. A road worker of the 2nd category should know:

Types of basic road building materials, pavement structures and artificial structures on the roads;

Methods for preparing asphalt concrete, cement concrete, bitumen-mineral and other mixtures;

Techniques for dealing with ice and snow drifts;

Traffic Laws;

Rules for the use of personal protective equipment;

Requirements for the quality of work (services) performed, for the rational organization of work in the workplace;

Assortment and marking of materials used, consumption rates of fuels and lubricants;

Rules for the movement and storage of goods;

Types of marriage and ways to prevent and eliminate it;

Industrial signaling;

Requirements for the quality of work on related construction processes (rules for sharpening, refueling, adjusting, adjusting the tools used and using the necessary fixtures and measuring instruments);

Rules for reading sketches and drawings directly used in the process of work;

Requirements for the rational organization of work in the workplace;

The procedure for notifying the manager of all shortcomings discovered during work;

Rules for the provision of first (pre-medical) aid to victims of injury, poisoning and sudden illness;

Internal labor regulations;

Labor protection rules, industrial sanitation and personal hygiene, fire safety;

1.4. A grade 3 road worker should know:

Documents, objects, methods and techniques for performing work specified in clause 1.3 of this instruction;

Basic properties of road building materials;

Rules for the construction and repair of unpaved and unpaved improved roads, sidewalks and foundations for asphalt concrete and cement-concrete pavements;

Rules for the use of mechanized tools used in the construction and repair of roads;

Techniques for disassembling and trimming coatings and bases using a mechanized tool;

Methods for elimination of destruction and restoration of pavement;

Methods for preparing bases for rails in the construction of cement-concrete roads;

Drainage basics;

When performing work on the marking of the road surface of highways: types of road markings and the rules for their application by hand, rules for performing work on roads without closing traffic, rules for fencing workplaces during work, the main properties of paints and varnishes;

- ____________________________________________________________________.

(types, names and details of other acts and documents)

1.5. A grade 4 road worker should know:

Documents, objects, methods and techniques for performing work specified in clauses 1.3 and 1.4 of this instruction;

Requirements for the quality of materials used in the construction and repair of roads;

Concreting rules in winter and concrete heating methods;

Rules for the construction and operation of road pavements, artificial structures and track conditions;

When carrying out work on the marking of the road surface of highways: the requirements for the quality of the materials used in the marking; types of horizontal and vertical markings, the order of their application; rules and methods of work when applying markings with a spray gun using stencils; consumption rates of marking materials; requirements for the quality of work performed; markup rules; rules for performing work in conditions with partial closure and without closure of motor traffic;

- ____________________________________________________________________.

(types, names and details of other acts and documents)

1.6. A grade 5 road worker should know:

Documents, objects, methods and techniques for performing work specified in clauses 1.3 - 1.5 of this instruction;

Methods for assessing the condition of road surfaces and artificial structures;

The device and rules for the use of a geodetic instrument;

Soil erosion control methods;

Methods for eliminating ice on roads;

When carrying out work on the road surface marking of highways: the main types and properties of paints, solvents and thermoplastic materials, methods for determining their viscosity and fluidity; methods of applying paints and varnishes; sizes of lines, arrows and inscriptions of horizontal markings; the procedure for applying markings in combination with road signs or traffic lights; technical requirements for road markings; rules for applying marking materials in combination with reflective elements; device and principle of operation of a mechanized tool for applying thermoplastic materials; composition and technology of applying two-component plastic materials;

- ____________________________________________________________________.

(types, names and details of other acts and documents)

1.7. A grade 6 road worker should know:

Documents, objects, methods and techniques for performing work specified in clauses 1.3 - 1.6 of this instruction;

Methods, techniques for assembling and fastening prefabricated reinforced concrete road and airfield slabs;

Methods and techniques for mounting steel and cast iron plates;

- ____________________________________________________________________.

(types, names and details of other acts and documents)

1.8. A higher grade road worker should be able to perform work that is commensurate with the complexity of their performance by workers of lower qualifications, as well as supervise lower grade road workers.

1.9. ___________________________________________________________________.

2. Responsibilities

2.1. Before the start of the working day (shift), the road worker:

1) receives a production assignment;

2) undergoes, if necessary, instruction on labor protection;

3) takes a shift;

4) checks the serviceability of devices, tools, inventory, etc., personal protective equipment;

(other responsibilities)

2.2. In the process of work, the road worker:

1) performs work for which he has been instructed and authorized to work;

2) uses overalls, safety footwear and other personal protective equipment;

3) receives instructions from the immediate supervisor on the implementation of the task, safe techniques and methods of work;

4) complies with the rules for the use of technological equipment, devices and tools, methods and techniques for the safe performance of work;

5) immediately notify the immediate supervisor of all shortcomings discovered during work;

6) complies with the requirements of personal hygiene and industrial sanitation;

7) ___________________________________________________________________.

(other responsibilities)

2.3. During the working day (shift) the road worker:

2.3.1. 2nd category:

1) cleans the bases and coverings from snow, dirt and dust by hand;

2) carries out the transfer of sand, gravel and crushed stone;

3) carries out watering of bases and ceilings with water;

4) carries out cleaning and lubrication of the surface of the rail molds during the construction of cement-concrete pavements;

5) carries out backfilling of cement-concrete coatings with sand;

6) clears road signs and track elements manually;

7) distributes road building materials for the construction and repair of road bases and pavements;

8) performs manual cleaning of the trough after excavation machines;

9) carries out darning of rail-forms;

10) makes manual disassembly of bases, coatings and borders;

11) carries out the device and repair of a solid mat;

12) sifts sand, gravel and crushed stone by hand on portable screens;

13) perform manual shoulder leveling;

14) makes manual pouring of binders;

15) carries out the reception of the mixture from the dump truck with cleaning the body when installing concrete pavements;

16) trims the edges of the freshly poured concrete mix;

17) performs manual compaction of places inaccessible for mechanized compaction;

18) produces stone blocks and packers;

19) performs sorting of stone and package;

- ____________________________________________________________________.

(other responsibilities)

2.3.2. 3rd category:

1) carries out the device and profiling for rolling on beacons, lighthouse rails, templates of road bases made of sand, sand cement, gravel, crushed stone;

2) carries out the profiling of unpaved and unpaved improved roads;

3) installs road signs;

4) carries out the arrangement and repair of drainages;

5) carries out patching of improved dirt roads, gravel, crushed stone surfaces, as well as repair of dirt roads with separate maps;

6) carry out the dismantling of road surfaces and foundations using a mechanized tool;

7) carry out the arrangement and repair of the cage matting;

8) carries out the arrangement of foundations for laying the side stone;

9) carries out the construction and restoration of ditches, drainage and upland ditches in compliance with longitudinal slopes and transverse profiles;

10) during the performance of work on the marking of the road surface of highways: determines the control points for the subsequent application of marking lines by machine, applies the lines of the pedestrian crossing manually using a template;

11) carries out the installation and removal of guards and cones;

12) carries out work with the use of paints and varnishes;

13) by order of the immediate supervisor, performs work corresponding to the complexity of their execution by workers of lower qualifications;

- ____________________________________________________________________.

(other responsibilities)

2.3.3. 4th category:

1) carries out the device and profiling of crushed stone and gravel coatings manually according to beacons, lighthouse rails and templates;

2) carries out repair of crushed stone, gravel surfaces with separate maps;

3) performs the final leveling of the road surface after leveling by machines;

4) install the curbstone;

5) installs beacons and beacons;

6) carries out the arrangement of a preparatory layer of crushed stone or gravel under the foundations of supports and pipes;

7) carries out the removal of atmospheric precipitation from roads and artificial structures;

8) carries out finishing and repair of the edges of the seam and surfaces of cement-concrete coatings;

9) carries out the installation and maintenance of barrier and cable fences;

10) during the performance of work on the marking of the road surface of highways performs: preliminary marking of control points according to the traffic management scheme, assembly and installation of templates, application of marking material with a spray gun, demarcation of old markings, work with the use of paints and varnishes, takes part in work when marking roads with road marking machines;

11) by order of the immediate supervisor, performs work corresponding to the complexity of their execution by workers of lower qualifications;

- ____________________________________________________________________.

(other responsibilities)

2.3.4. 5th grade:

1) carries out the elimination of places of subsidence of road surfaces;

2) carries out the installation and repair of pipes, trays, heads, retaining walls and parapets;

3) repairs individual damages to elements of the architectural design of highways;

4) makes a breakdown of the picketage and road elements in the plan;

5) determines the elevation marks of road structures using a geodetic instrument;

6) carries out the installation and repair of drainages and paving with the restoration of filters;

7) installs fencing and signaling devices;

8) performs the consolidation of developing foci;

9) in the course of work on the marking of the road surface of highways performs: the application of pedestrian crossing lines of the "Zebra" type with paints and thermoplastic materials, the designation of islands dividing traffic flows in opposite directions, stenciled with the help of spray guns, the drawing of arrows indicating the direction of movement along the strips, two-component plastics, retroreflective elements with a pneumatic pistol, marking the vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets, works using paints and varnishes;

10) by order of the immediate supervisor, performs work corresponding to the complexity of their execution by workers of lower qualifications;

- ____________________________________________________________________.

(other responsibilities)

2.3.5. 6th category:

1) makes installation:

Precast concrete road and airfield slabs;

Steel and cast iron plates;

2) by order of the immediate supervisor, performs work corresponding to the complexity of their execution by workers of lower qualifications;

- ____________________________________________________________________.

(other responsibilities)

2.4. At the end of the working day (shift), the road worker:

1) brings devices, tools into proper condition, transfers them to storage;

2) removes dirt from workwear and safety footwear, if necessary, places it for drying and storage;

3) performs an inspection (self-examination);

4) hand over the shift;

5) ___________________________________________________________________.

(other responsibilities)

3. Rights

When performing his duties, a road worker has labor rights provided for by an employment contract concluded with an employee, internal labor regulations, local regulations, the Labor Code of the Russian Federation and other acts of labor legislation.

4. Responsibility

4.1. A road worker is subject to disciplinary liability in accordance with the article for improper performance through his fault of the duties listed in this manual.

4.2. The road worker is financially responsible for ensuring the safety of the inventory entrusted to him.

4.3. A road worker for committing offenses in the course of his activities, depending on their nature and consequences, is brought to civil, administrative and criminal liability in the manner prescribed by law.

4.4. ___________________________________________________________________.

5. Final provisions

5.1. This manual has been developed on the basis of the Tariff

qualification characteristics of the profession "Road worker, 2nd - 6th category"

(Unified tariff and qualification reference book of workers' jobs and professions.

Issue 3. Section "Construction, installation and repair and construction works",

approved by the Decree of the Ministry of Labor of Russia dated 06.04.2007 N 243),

(details of other acts and documents)

5.2. Familiarization of the employee with this instruction is carried out when

hiring (before signing an employment contract).

The fact of familiarization of the employee with this instruction is confirmed by ____

(by painting on the acquaintance sheet, which is an integral part of this

___________________________________________________________________________

instructions (in the log for reading instructions); in a copy

__________________________________________________________________________.

instructions kept by the employer; in another way)

5.3. ___________________________________________________________________.

Unified tariff and qualification reference book of jobs and professions of workers (ETKS), 2019
Issue No. 3 ETKS
The issue was approved by the Order of the Ministry of Health and Social Development of the Russian Federation of 06.04.2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)

Road worker

Section 20. Road worker of the 2nd category

Description of works... Manual cleaning of substrates and coatings from snow, dirt and dust. Transfer of sand, gravel and crushed stone. Watering of bases and floors. Cleaning and lubrication of the surface of rail molds during the construction of cement-concrete pavements. Backfilling of cement-concrete pavements with sand. Manual cleaning of road signs and road elements. Distribution of road building materials in the construction and repair of road bases and pavements. Manual trough cleaning after earth moving machines. Undermining of rail-forms. Manual disassembly of substrates, coatings and curbs. The device and repair of a solid mat. Sifting sand, gravel and crushed stone by hand on portable screens. Manual shoulder grading. Pouring of binders by hand. Reception of a mixture from a dump truck with cleaning the body when installing concrete pavements. Trimming the edges of fresh concrete. Manual ramming of places inaccessible for mechanized rolling. Harvesting of stone blocks and pakelazh. Sorting of stone and packing.

Must know: types of basic road building materials, pavement structures and artificial structures on the roads; methods of preparing asphalt concrete, cement concrete, bitumen-mineral and other mixtures; techniques for dealing with ice and snow drifts; Traffic Laws.

Section 21. Road worker of the 3rd category

Description of works... Arrangement and profiling for rolling on beacons, lighthouse rails, templates of road bases made of sand, sand cement, gravel, crushed stone. Grading of unpaved and unpaved improved roads. Installation of road signs. Installation and repair of drainages. Patching of improved dirt roads, gravel, crushed stone surfaces, as well as repair of dirt roads with separate maps. Dismantling of road surfaces and foundations using a mechanized tool. Arrangement and repair of matting in a cage. Arrangement of foundations for laying side stone. Construction and restoration of ditches, drainage and upland ditches in compliance with longitudinal slopes and transverse profiles. When carrying out work on the marking of the road surface of highways: determination of control points for the subsequent application of marking lines by machine; drawing the lines of the pedestrian crossing manually using a template. Installation and removal of guards and cones. Production of works using paints and varnishes.

Must know: basic properties of road building materials; rules for the construction and repair of unpaved and unpaved improved roads, sidewalks and foundations for asphalt concrete and cement-concrete pavements; rules for the use of mechanized tools used in the construction and repair of roads; techniques for disassembling and trimming coatings and bases using a mechanized tool; ways to eliminate damage and restore pavement; methods of preparation of bases for rail-forms during the construction of cement-concrete roads; the basics of the drainage device. When carrying out work on the marking of the road surface of highways: types of road markings and the rules for their application by hand, rules for performing work on roads without closing traffic, rules for fencing workplaces during work; the main properties of paints and varnishes.

Section 22. Road worker of the 4th category

Description of works... Arrangement and profiling of crushed stone and gravel pavements manually according to beacons, lighthouse rails and templates. Repair of crushed stone, gravel surfaces with separate maps. Final leveling of the pavement surface after leveling by machines. Installation of a curbstone. Installation of lighthouses and lighthouse rails. Arrangement of a preparatory layer of crushed stone or gravel for the foundations of supports and pipes. Removal of atmospheric precipitation from roads and man-made structures. Finishing and repairing the edges of the seam and surfaces of cement concrete pavements. Installation and maintenance of barrier and cable fences. When carrying out work on the marking of the road surface of highways: preliminary marking of control points according to the traffic organization scheme; assembly and installation of templates; application of marking material with a spray gun; demarcation of old markup; participation in road marking with road marking machines; production of works using paints and varnishes.

Must know: requirements for the quality of materials used in the construction and repair of roads; concreting rules in winter and concrete heating methods; rules for the construction and operation of road pavements, artificial structures and track conditions. When carrying out work on the marking of the road surface of highways: the main properties of paints and varnishes; requirements for the quality of materials used for marking; types of horizontal and vertical markings, the order of their application; rules and methods of work when applying markings with a spray gun using stencils; consumption rates of marking materials; requirements for the quality of work performed; markup rules; rules for performing work in conditions with partial closure and without closure of traffic.

§ 23. Road worker of the 5th category

Description of works... Elimination of places of road surface subsidence. Installation and repair of pipes, trays, heads, retaining walls and parapets. Correction of individual damages to elements of the architectural design of highways. Layout of stationing and road elements in plan. Determination of elevation marks of road structures using a geodetic instrument. Installation and repair of drains and paving with restoration of filters. Installation of fencing and signaling devices. Consolidation of developing foci. In the course of work on the road surface marking of highways: application of "Zebra" type pedestrian crossing lines with paints and thermoplastic materials; stenciling of islands separating traffic flows in opposite directions using spray guns; drawing arrows indicating the direction of movement along the lanes, two-component plastics, retroreflective elements with a pneumatic pistol, marking the vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets; production of works using paints and varnishes.

Must know: methods for assessing the condition of road surfaces and artificial structures; device and rules for using a geodetic instrument; methods of combating soil erosion; ways to eliminate ice on the roads. When carrying out work on the road surface marking of highways: the main types and properties of paints, solvents and thermoplastic materials, methods for determining their viscosity and fluidity; methods of applying paints and varnishes; sizes of lines, arrows and inscriptions of horizontal markings; the procedure for applying markings in combination with road signs or traffic lights; technical requirements for road markings; rules for applying marking materials in combination with reflective elements; device and principle of operation of a mechanized tool for applying thermoplastic materials; composition and technology of applying two-component plastic materials.

§ 24. Road worker of the 6th category

Description of works... Installation of precast concrete road and airfield slabs. Installation of steel and cast iron plates.

Must know: methods, techniques for assembling and fastening prefabricated reinforced concrete road and airfield slabs; methods and techniques for mounting steel and cast iron plates.

Secondary vocational education is required.

Section 21. Road worker of the 3rd category

Section 22. Road worker of the 4th category

§ 23. Road worker of the 5th category

§ 24. Road worker of the 6th category

Description of works... Installation of precast concrete road and airfield slabs. Installation of steel and cast iron plates.

Must know: methods, techniques for assembling and fastening prefabricated reinforced concrete road and airfield slabs; methods and techniques for mounting steel and cast iron plates.

Secondary vocational education is required.

Concrete worker