How to make a guitar out of cardboard with your own hands? How to make a guitar out of cardboard
Children will especially enjoy this craft - a guitar made from cardboard. Making such a craft with your own hands will not be difficult and will not take much time. You can make it from ordinary cardboard, which is probably found in every home.
The material that will be required to make the craft is cardboard - preferably straight, without bends, hot glue or moment glue, a stationery knife, rubber bands or fishing line, or any other material suitable for strings, two paper clips, two simple pencils.
To get started, print out the guitar templates provided, cut them out, and transfer them to cardboard.
There should be a total of 5 parts for the future guitar.
Then, using hot glue, glue the two large pieces together.
Take two wooden pencils to make two guitar saddles - an upper and a lower one. To do this, cut 4 cm from one pencil and 7 cm from the other.
On the front side of the guitar, stepping back from the circle 2.5 cm, you need to draw a line equal to 7 cm. Then, stepping back 0.5 cm from the line, draw 4 dots with a distance of 1.5 cm between them.
Then, using a knife, make a shallow cut in the cardboard, straight along the line.
Run your finger along the cut so that you can press down the cardboard to create space for the pencil.
Then, using hot glue, glue a 7cm pencil into the fold - this will be the guitar's bridge.
Make the top nut just below the bend line on the fingerboard. Then drill 4 points, glue the pencil, still using hot glue, then use a knife to make small notches as shown in the picture.
For guitar strings, you can use rubber bands or anything suitable - for example, fishing line.
Tie each end of the elastic tightly to a paper clip or something similar, 2.5 cm long.
Starting at the top of the neck, at the back of the guitar, thread each rubber band, one at a time, through the four holes.
Turn the guitar upside down, now you need to tighten the elastic bands and thread them in the opposite direction through the lower holes in the guitar, and fasten them to a paper clip in the same way as the upper version.
Cut off any excess elastic if there is any, then secure the paperclip with glue to prevent it from dangling.
Then, glue the remaining two small parts to the back of the guitar, this will give the guitar the desired volume. Press all layers together and leave until completely glued.
Trim uneven edges with a knife if necessary.
Please note that the guitar can be modified to give it a more elegant look; for this, the edge can be covered with paper to hide all the irregularities.
The cardboard guitar is ready.
If you need to make a guitar for a particular toy, we suggest making it with a master class on how to make it.
To create a toy guitar you will need:
Cardboard of two or three grades (regular medium, thick and thin);
- threads;
- glue “Moment”;
- acrylic lacquer.
Toy guitar step by step:
Initially, you will need to decide on the size of the future guitar and make a pattern (photo 1). Cut out two pieces from medium-thick cardboard according to the pattern (photo 2). Next, make a pattern for the “width” of the future guitar - determine the length of the strip (photo 3).
Then, using this pattern, cut out the following “crocodile” part (use thin cardboard so that it does not wrinkle during bending). Please note that the alligator teeth are necessary in order to evenly glue the sidewall to the guitar (photo 4).
Next, start carefully gluing the “crocodile” to the guitar doors, one tooth at a time, gluing it according to the “shape” (photo 5). Just like in photo 6. Before sealing the guitar with the second flap, paint it on the inside so that the white cardboard does not show through (photo 7).
Then cut out three more parts, which you will make from the thickest and most reliable cardboard. A stand for strings, a neck and a mechanism where the strings are attached (photo 8.1). Before assembly, all external parts must be painted, since then it will be inconvenient to paint under the strings. Also at this stage, varnish the outer part (photo 8.2).
At the same time, draw the frets, since then, under the strings, this will also be difficult to do (photo 11). Now glue the strings to the stand for them and glue all the parts together. The neck is to the guitar, strings stretch from the bottom to the neck (photo 12).
Repaint if you didn’t immediately finish the back and the guitar is ready!
For a lover of rock music or instruments, the mention of this topic brings great pleasure. His room is covered with posters of musicians. A guitar, piano or button accordion firmly takes its place in the furniture or decorates the walls.
Cute little thing
A musical instrument made from scrap materials is not so much a practical item as a decorative one. If you make a guitar out of cardboard, like a real one, big and with strings, you might even be able to play it.
Small cardboard instruments are used as souvenirs, for home decoration and as original gifts. A small cardboard guitar, made with love and decorated with cool inscriptions, will undoubtedly delight a friend on his birthday.
How to make a guitar out of cardboard with your own hands, and what is needed for this? Let's consider this issue in more detail, because, for sure, everyone has someone who will be pleased with such a gift.
Troubadour's Joy
A cardboard guitar can be of different sizes: large, almost like a real one, and miniature. Making a guitar out of cardboard like a small real original is not that difficult. Let's stock up on patience, the necessary items, and on our own we will create the musical instrument that the well-known Troubadour played.
How to make a guitar out of cardboard
Before work, you need to prepare materials and tools. It’s good if the master has the desired sample in front of him, for example, a picture or photograph of a guitar.
First you need to collect what you need:
- durable cardboard;
- hot glue;
- PVA glue;
- small nails;
- fishing line;
- ruler, pencil;
- stationery knife;
- finishing putty, wood putty;
- spray paint;
- sandpaper;
- old guitar string.
Now the process of creating a small masterpiece:
- Find a suitable image of a guitar, print it and cut it out. Transfer the template to thick cardboard.
- Sand the edges of the cut guitar with sandpaper. Cut out the second part and sand it the same way. Then put the parts together and grind them again.
- Measure the side inserts and cut strips of cardboard to the required size. Glue the parts together with hot glue. Glue stiffening ribs inside the guitar, which will help keep the body strong.
- Glue the upper deck onto the lower one. Cut off the dried glue with a knife. Sand again.
- Coat the body of the guitar with PVA. Dry and apply putty, previously diluted with PVA, in 2-3 layers. After each drying, prime with glue diluted with water in a 1:1 ratio.
- After drying, go over the workpiece with sandpaper. Apply wood putty. Sand again. After this procedure, the surface of the guitar will be very smooth and even.
- To make the neck, we cut out three cardboard pieces according to the template. We glue all parts with PVA. Using the familiar system, we treat the fingerboard with finishing putty, primer and wood putty.
- We use the same principle to make a stand for strings.
- Using hot glue we assemble all the parts of the guitar.
- We paint the instrument in the desired color and apply varnish.
- From a guitar string or fishing line, we cut out small strings for a micro guitar and attach them.
As it turns out, making a rock guitar out of cardboard is not that difficult.
A simple way to make a tool
Boys love to play rock musicians. You can make a toy instrument for a little guitarist in a matter of minutes. You will need:
- cardboard;
- scissors;
- stationery knife;
- pencil;
- fishing line or thread;
- popsicle stick;
- hot melt adhesive.
Let's start making:
- Let's cut out 3 parts of a whole guitar from cardboard according to the template.
- We glue all the parts together. We process uneven edges with a stationery knife.
- Cut a circle in the drum of a cardboard tool. Glue an ice cream stick as a stand for the strings. Under it we cut out or drill holes for future artificial strings.
- If desired, the guitar can be painted in any color, coated with varnish or PVA glue.
- After drying, thread strings made from fishing line or elastic.
The guitar for the young musician is ready!
Methods of fortune telling on cards
Fortune telling on wax figure of boots
Fortune telling what's in your loved one's heart: gypsy layout