The construction of a private house implies sooner or later the installation of a capital fence instead of a temporary one. It is often quite difficult to choose the type of fence, and sometimes it is even more difficult to realize what was conceived. To the aid of private traders and beginners in matters of construction, ready-made designs of fences from various materials come.

Finished brick fence project

Types of fences

• Fences made of profiled sheet with a metal frame;
• Fences made of corrugated board with brick pillars;
• Various types of wooden fence;
• Capital fence made of concrete;
• Metal fences.

Of course, there are many more options for fencing. On the network, you can freely download a typical project of almost any type of fence. You can do this for free or for a fee. If you want an individual approach to solving the issue of decorating the exterior of a private house, it is better to contact a specialized organization and order a fence design.

This service costs a lot, since the company's employees will have to go to the site, take measurements, make material calculations and make an estimate. Many, in order to save money, prefer to simply download the project from the Internet and adapt it to the realities of their home.

Detailed drawing of the fence with dimensions

If there is no desire or opportunity to download the finished project, do the design yourself.

Material selection

Before dwelling on any particular type of material, several nuances should be taken into account:

Of course, the question of taste preferences or the current fashion for one or another type of fencing also plays an important role. So, in one year it becomes fashionable, in another - a fence with brick pillars and forged metal sections. Fashion changes, so it is much more important that the owner likes the look of the fence.

It is also important to match the style of construction and design of the house.

An example of a brick fence decorated for the exterior of a cottage

A building made of red brick is perfect to match with any filling between the supports. A sophisticated chalet-style house is externally matched by a picket fence.

For a grandiose castle, the best choice would be a monumental fence made of brick or concrete, or a beautiful wrought-iron fence.

A log cabin is best hidden behind. If the building does not have a special design, a simple wooden fence is suitable for it.

When you want to stand out among others, pay attention to fences made of unusual materials or with non-standard finishes.

The fence of a private house, in addition to the security function of the territory, also has an aesthetic side. The design of fences from the corrugated board of private houses is diverse and unique. Each owner tries to decorate the facade of his site with a strong and at the same time unique fence, which is in harmony with the architectural style of the house.

Fencing made of corrugated board using a decorative lattice

Fence design in a private house

Beautiful corrugated fence combined with wood

The fence between neighbors must meet the requirements of transparency, maximum height, and other standards established by the local council. The fence of a private house, facing the street, protects against the penetration of unauthorized persons, reflects the taste and material level of the owner. Fence elements allow you to create a unique single image of the fence and the house:

• profile relief;
• imitation for natural materials;
• drawings and self-adhesive film;
• columns;
• curly cutouts;
• forged items;
• foundation;
• combination of sheets;
• decorative inserts;
• plinth.

All options for the design of fences from the profiled sheet of private residential buildings are available for independent implementation, including the construction of a fence. It is necessary to proceed from the architectural style of the house, which will be visible against the background of the originally decorated corrugated board.

Forging makes the fence richer and more beautiful

Combination options with forging

Designers should be contacted to design a fence with a decorative one or when it is necessary to design the location of the fence on a terrain with complex terrain.

SNiP regulates only the location of the fence exactly along the border, allowing it to move deeper into the site. The fence does not apply to capital structures; a construction plan is not required for it.

Even close up, it’s not immediately distinguishable that the base is made of metal

Imitation under a tree

Sandstone, tuff and dolomite are often found in patterns on profiled sheets. The design of the fence with such an image looks solid and expensive. When choosing a pattern, one should take into account the masonry material of the walls and decorative decorations of the facade of the house. The combination of the same colors and materials will connect the house with its fence into a single architectural ensemble.

Imitation stone

If desired, you can order corrugated board with a special pattern applied to it. It is enough for the client to give a sample of the image of nature, animals or an ornament, and they will be transferred to the sheet in a way.

Photo printing example

Fans of decorating the fence of a private house with their own hands use a self-adhesive film. It may contain images of flowering shrubs, landscapes, ornaments. It is necessary to glue the film across the profile, gradually pressing it against the textured surface.

Landscape of mountains and lake

The film absolutely changes the look of a conventional profiled sheet

For artists and just lovers of drawing, creating paintings with oil paints is suitable. Specialists can create a natural landscape. For fans, cartoon characters and drawings similar to children's ones will look original, as in the photo below.

Fairy edge

Artist's drawing with oil paints

brick columns

Flowers along the fence will decorate the exterior

An example of pillars and a base made of bricks on a reinforced concrete foundation

Looks aesthetically pleasing with stone pillars

Figuratively cut sheets

Fence with a curly top

Cynologists advise for thoroughbred dogs living in the yard to leave a transparent section of the fence below 200 mm wide.

It is easy to turn it into a decorative element by placing curly elements on its background. A simple, inconspicuous one will visually add airiness to the fence, raising the corrugated board above the ground.

Mesh netting at the bottom of the fence

Usually the sheet is cut straight. Modern equipment allows you to choose and order a curly cut edge. The step of the ornament coincides with the profile deflections. Monochromatic brick-colored corrugated board will turn into a castle wall with battlements as an original addition to stone columns.

Forging elements

Gate and wicket, made according to the design project

A fence with a semicircular top looks complete if a metal lace is placed above the sheet. Such elements of artistic forging will decorate all cutouts, including the gap between the base and.

Vertical inserts

Vertical cutouts with forged elements on the background look especially original. The transparent insert allows light to pass through, but distorts the image. A curious eye will not be able to make out what is happening in the yard. The dark silhouette of a forged flower or ornament will give the fence originality and originality.

Vertical forged sheet inserts

Wide vertical inserts made of transparent material can be filled with beautiful ornamental shrubs. In winter, the plant will shed its foliage and will stand out in a dark pattern against the background of snow. A fragment of the fence will remain original all year round.

Forging gives an undeniably rich look

Imitation of a plinth on a hedge

A fence with a high plinth and a narrow sheet looks original. It is suitable for houses decorated in historical styles, semi-antique. The plinth is stone-like, massive columns and a plain profile.

A neat fence around a country house is the final point of construction work. Without this, the architectural landscape will not look stylistically complete. Again, worries about the security of the territory and the house itself will be much less if there is a reliable fence nearby.

Fences and barriers from the company Grandfence

successfully operated , in , in on and various .

And the experience of our work has revealed the main problem of customers - the need for an accurate and complete specification of the fencing kit. GrandFence takes on this crucial moment of order formation. According to the proposed fencing project, we produce a complete acquisition, and.

If you are not sure what kind of fence you need, or what type of fence is needed in a particular case, then GrandFence offers its customers the development of a finished fence project with its subsequent completion, in accordance with current building codes SN 441-72 "Guidelines for the design of site fencing and sites of enterprises, buildings and structures.

All this fully applies to industrial enterprises, warehouse complexes, sports and playgrounds - it is important not only to delimit areas, but also to ensure the safety of the fenced area. As far as these sections differ from each other in appearance, size, functional purpose, the design and degree of protection will also differ greatly. Not always ready-made fence solutions, or otherwise standard projects that are offered by designers of many enterprises, meet all the needs of the customer.

At the request of design organizations, it is sent.

Standard Solutions

Together with our partners, we have developed a catalog of standard fences and railings.

The catalog contains typical fencing for

airports;

industrial zones;

sports grounds with a height of 3 m and 4 m;

schools and kindergartens,

children's playgrounds,

fences for installation on screw supports.

For more information, please contact us, or by calling the numbers listed in the "Contacts" section.

General instructions:

1. Working drawings were developed on the basis of the approved project, in accordance with the architectural and planning task and technical specifications for structures and materials.
2. The foundations are columnar of monolithic reinforced concrete, connected by a grillage.
3. The perimeter fence is designed in two types: brick from the side of the road and wooden between the neighbors.
4. The load-bearing elements are designed in the form of pillars made of monolithic reinforced concrete and brickwork.
5. The brickwork is made of M 150 grade brick, reinforced every 3 rows.
6. The concrete class of monolithic reinforced concrete structures is specified in the specifications for the elements.
7. Longitudinal working reinforcement is accepted as class A 400 (A-III), transverse - class A240 (A-I).
8. Docking of the working longitudinal reinforcement should be overlapped. Place the joints of the rods of knitted frames and overlapped meshes along the length of the element apart. The cross-sectional area of ​​the working bars, joined in one place or at a distance less than the length of the overlap, should not exceed 50% of the total cross-sectional area of ​​the tensile reinforcement. The longitudinal displacement of the axes of the joints must be at least 1.5 of the length of the overlap. The length of the overlapping of the working rods must be at least 40 diameters of the joined reinforcement.
9. Bent rods are produced in a cold state on mandrels with a diameter of 3d for reinforcement of class A 400 (A-III) and 2.5d for A240 (A-I).
10. Construction work to be carried out in accordance with the requirements:
    • earthen - SNiP 3.02.01-87;
    • foundations and erection of monolithic structures - SNiP 3.03.01-87
    • safety precautions in construction SNiP III-4-80.
11. All deviations from the fence project should be coordinated with the developer of working documentation.

List of working drawings:

Sheet 1: Total information
Sheet 2: Fence scheme
Sheet 3: View A
Sheet 4: View B
Sheet 5: View B. Detail D-1
Sheet 6: Fragment 1
Sheet 7: Sections 1-1 (foundation), 3-3, 4-4, 5-5, 6-6, 7-7
Sheet 8: fence specification. Final Bill of Materials
The project was developed in accordance with the rules, norms, instructions, state standards.

Sheet 3 - View A

Notes:

1. View A is marked on sheet 2
2. Section 3-3 - on sheet 7

Sheet 4 - View B

Notes:

1. Section 3-3, 4-4, 5-5, 6-6, 7-7 see sheet 7
2. Detail D-1 - on sheet 5
3. Specification - on sheet 8

Sheet 5 - View B. Detail D-1

Notes:

1. See section 5-5 on sheet 7
2. Fragment-1 - on sheet 6
3. Specification - on sheet 8
4. Install embedded parts D-1 in accordance with the terms of reference for the installation of gates and gates.

Sheet -6 - Fragment 1. Reinforcement and formwork

Notes:

1. Fragment 1 marked on sheet 5
2. Specification - on sheet 8

Sheet 7 - Sections 1-1 (foundation), 3-3, 4-4, 5-5, 6-6, 7-7

Notes:

1. Sections 3-3, 4-4, 5-5, 6-6, 7-7 are marked on sheet 4
2. Specification - on sheet 8
3. Detail D-1 see on sheet 5

At the moment, many are faced with the problem of accurately calculating the required material. For such cases, there is a design program for the fence. With its help, you can not only visualize the future fence, but also calculate the exact amount of material.

Program interface for designing fences and fences

Manufacturing companies offer a range of services, including design. The websites of such enterprises contain calculators for calculating the required material. It is very easy to use them. Data on the dimensions of the future fence are driven in, on their basis an estimate is automatically generated. But such programs do not design fences and are more suitable for simple fences, for example, from a profiled sheet.

But if you want the whole to appear as a single whole, then it is better to turn to professionals or use a special program that will give a number of advantages:

The presence of properly selected software will allow you to make realistic visualization and accurate calculation of the required materials.

At the moment, there are many software for highly specialized design. Several important points influence the choice of the program:

Read also

Repair of a country fence

Some professionals use several types of software at once to create the most realistic display of the project.

Designing a fence in Excel

What programs are worth paying attention to

To design fences, you should not delve into expensive programs that will take a very long time to study, it is better to consider more simplified options for the layman.

sketch up

Free project resource, Russified. Simple interface, a large number of video lessons. The library has a wide range of elements, it is possible to add new ones. This program is more designed for the average user, therefore it does not contain the "estimate" option. The calculation of the material is done manually, as well as the cost. This helps to work with layers that display each stage of construction, including the details of the fence.


3D visualization makes it possible to assess how the desired fence fits into the overall landscape design.

Our garden Crystal 10

The program is intended for the layman, but it is often used by professionals. This software allows you to design buildings, develop landscape designs. The library contains a large number of objects, including many types of fences and railings.

Another undoubted advantage of such a program is the automatic formation of estimates for the material used in the project, and the 3D picture conveys the realism of the desired object.

To create fences in this software product, a special fence editor is used. To begin with, the planned type of structure is selected, and then it is possible to replace the components. Using the assortment of the library, unique, individual projects are created.

Program interface Our Garden Crystal

The generated table is displayed in XSL, where you can optionally edit the received data. The presence of video lessons and a simple interface make it possible to master the software in a short time. The cost of the software product is from 3,000 rubles.