Purpose: Designed specifically for individual and collective water supply systems. For wells with a diameter of 6" or more. Operating range: capacity - from 0.3 to 5.7 cubic meters per hour, pressure - up to 47 m of water column. Maximum operating pressure: maximum immersion depth - 10 m. Pumped liquid. Composition: clean, without solid inclusions and mineral oils, non-viscous, chemically neutral, similar in characteristics to water. Temperature - from 0°C to +35°C. Main materials. Impellers and diffusers, outer casing and hydraulic casing - made of technopolymer ; motor casing, suction screen, shaft and fasteners are made of stainless steel. Oil chamber mechanical seals are gland seals. Features: Multistage well pump. Shaft seal is oil chamber with two gland seals. All models are equipped with an electromechanical control system with built-in sensors pressure and flow. There is built-in protection against "dry" running and overload. Models with the "X" index are equipped with a suction pipe for organizing the intake of water from the upper layers, using a flexible suction pipe with a float (ordered separately). Installation. The motor shaft is in a vertical position. During prolonged operation, the pump may not be fully submerged. Standard power supply: 1x230 V. Protection class: IP 68. Insulation class: F.

Submersible pump DAB DIVERTRON 1200M- a real hit of sales. One of the most popular and well-designed modern pumps. Powerful characteristics, excellent Italian build quality and energy efficiency.

It will help organize water supply in a residential building, irrigate the site, fill a tank, swimming pool or artificial pond in the garden in a short time. The DAB 1200 pump is a favorite choice of owners of private homes and commercial properties.

It is completely silent in operation, equipped with all the necessary automation to control the water pumping process. For a fairly low price, this one device can replace an entire pumping station with a tank.

Italian engineers have thought through protection in all areas:

• electronic control against motor overload and “dry running” in the absence of water, which is extremely important in wells with a small supply;
• auto shutdown when overheating - when the temperature approaches the critical point, the pump will stop, cool down and turn on itself after 15-20 minutes (if there is liquid);
• The absence of constant on/off when the pressure drops protects the pump motor and directly affects its lifespan.

Compared to the DAB 1000 M model, it has a higher immersion level (12 meters) and a productivity of up to 5.7 m³/hour. Forget about constantly fluctuating water pressure - the DAB DIVERTRON multi-stage pump will ensure an uninterrupted water supply and constant pressure in the hydraulic system.

Note! Suitable for use only with chemically neutral, clean liquids.

The DAB DIVERTRON X 1200 M submersible well pumping station is designed for wells with a diameter of 6" or more. Designed for individual and collective water supply and irrigation systems.

Water is drawn through a special hose - DAB KIT. The hose allows you to draw water above the pump installation level. Sold separately.

The Divertron pumping station is equipped with automation, which allows you to comfortably use water at any time. The pump is turned on by a pressure sensor. The moment the user opens the tap, the pressure in the water supply network drops and the pump turns on. The pump is switched off by a flow sensor. When the entire water supply system is full, the water flow stops and the pump turns off. The pump is also equipped with a built-in “dry running” feature.

Advantages of DAB DIVERTRON X 1200 M:

• Well pumping station does not create noise in the house
• Built-in automation system for comfortable use of the pump
• Dry protection reduces the likelihood of breakdowns and repair costs
• The pump is set “from the factory” and does not require additional settings
• Water is drawn above the pump installation level through a special hose
• The kit includes a fitting that allows you to connect a hose or pipe of various diameters.

Correct installation of the DIVERTRON pump:

• The pumping station must be lowered into the well using a rope or rope. There is a special hole on the pump body. Do not lower the pump by the power cable.
• The maximum height between the highest water intake point and the pump installation level should not be more than 15 meters, otherwise the pump automation will not be able to work correctly.
• To avoid water hammer, it is recommended to install a hydraulic accumulator of 2 - 8 liters.
• Minimum diameter of supply pipe 1"
• The pump is equipped with a built-in check valve, but it is recommended to install an additional check valve at a distance of at least 2 meters from the pump.
• The minimum height to the bottom of the well must be more than 0.5 meters. In this case, muddy water will not be drawn from the bottom of the well.

Materials:

• Impellers, diffusers, outer casing and hydraulic housing: technopolymer
• Motor casing, suction grille, shaft and fasteners: stainless steel
• Mechanical seals of the oil chamber: stuffing box seals.

Information about technical characteristics, delivery set, country of manufacture and appearance of the product is for reference only and is based on the latest information available at the time of publication

Characteristics

Country of Origin	Italy
? The period during which the manufacturer provides a guarantee for the product Manufacturer's warranty	2 years
Max. flow rate, m³/hour	5.7
Max. head, m	47
Temperature of the pumped liquid	0-35 °C
Connection size	1"
Housing material	Composite
Max. immersion depth, m	12
Impeller material	Technopolymer
Cable length, m	15
Protection class	IP 68
Insulation class	F
Power consumption	0.75 kW
Voltage	1x230 V (single-phase)
Weight, kg	11
Height, mm	450
Width, mm	150
Depth, mm	150

Ask a Question

You can ask any question you are interested in about the product or the work of the store.

Our qualified specialists will definitely help you.

Shipping and payment

Payment options

Cash upon receipt

Payment in cash is possible upon receipt of the order at the point of issue, in our office or upon delivery by courier service. Please note that some pick-up points do not accept cash payments; the manager will clarify the possibility of payment when confirming the order. If the order amount is more than 30 thousand rubles, an advance payment may be required.

By bank card on the website

If you want to pay for your order online, you need to select the payment method “Card on the website” when placing your order. After confirmation of availability and delivery costs, an email with a link to your personal account will be sent to your email address. To pay for your order, you need to click on the “Pay” button in your personal account, then you will be redirected to the bank’s secure payment page*.

By bank card upon receipt

Payment by credit card is possible upon receipt of the goods at our office and at the delivery points of our partners. Please note that some pick-up points do not accept payment by card; the manager will clarify the possibility of payment when confirming the order.

Cashless payment for individuals. persons

When placing an order, you must select the payment method "Payment by invoice". After confirmation of the order by the manager, an invoice for payment will be sent to your email, which you can pay at any bank that accepts payments from individuals or through online banking.

Cashless payment for legal entities. persons

To receive an invoice for payment, you need to place an order as a legal entity. person and indicate all the data necessary for issuing an invoice (TIN, KPP, company name). Once product availability is confirmed, you will be issued an invoice valid for 3 days.

Loan for up to 24 months or 6 months without overpayment

An opportunity for clients of Sberbank PJSC to obtain a consumer loan for a purchase without leaving home. Loan approval through Sbrebank Online. There are 2 lending options available:

• Loan for a period from 3 to 24 months. The total cost of the loan depends on the loan term and the cost of goods.
• For goods marked with the “Credit without overpayment” sticker, you can apply for loan for 6 months with a discount from our company. The discount is calculated in such a way that in the end, with interest, you pay the full cost of the product without overpaying interest on the loan.

Conditions for applying for a loan:

• Russian citizenship
• Sberbank PJSC debit card holder
• Age from 21 to 65 years
• Availability of registration on the territory of the Russian Federation
• Loan amount from 3,000 to 300,000 rubles.

Purpose: Designed specifically for individual and collective water supply systems. For wells with a diameter of 6" or more. Operating range: capacity - from 0.3 to 5.7 cubic meters per hour, pressure - up to 47 m of water column. Maximum operating pressure: maximum immersion depth - 10 m. Pumped liquid. Composition: clean, without solid inclusions and mineral oils, non-viscous, chemically neutral, similar in characteristics to water. Temperature - from 0°C to +35°C. Main materials. Impellers and diffusers, outer casing and hydraulic housing - made of technopolymer ; motor casing, suction screen, shaft and fasteners are made of stainless steel. Mechanical seals of the oil chamber are gland seals. Features. Multistage well pump. Shaft seal - oil chamber with two gland seals. All models are equipped with an electromechanical control system with built-in sensors pressure and flow. There is built-in protection against "dry" running and overload. Models with the "X" index are equipped with a suction pipe for organizing the intake of water from the upper layers, using a flexible suction pipe with a float (ordered separately). Installation. The motor shaft is in a vertical position. During prolonged operation, the pump may not be fully submerged. Standard power supply: 1x230 V. Degree of protection: IP 68. Insulation class: F.

Well pumps DAB series DIVERTRON X 1200 M are in high demand among summer residents and individual users. Manufactured at the original DAB® plant in Italy, thought out by engineers down to every detail, DAB pumps have excellent technical parameters and make it possible to build a reliable water supply system.

This is a direct analogue of the popular submersible model, however, the letter X in the name means the presence of a small suction pipe. By purchasing a special hose with a float for it, you can organize the collection of water from the upper layers and increase the overall efficiency of the pump.

The device is perfect for gardening, watering the vegetable garden, pumping water from wells, ponds and other reservoirs with a diameter of 6” or more, quickly filling a swimming pool, supplying water to a bathhouse or country house.

DIVERTRON X 1200 M is a more powerful model relative to the younger 1000 M, has increased pressure and 4 impellers. It will find application in farming for irrigating crops - the power of 1100 W is enough for this too! And if you insulate the inlet using a DAB pump, you can establish a water supply in an unheated room in winter.

In addition, the device is autonomous, equipped with smart control and can replace a full-fledged pumping station. It is practically inaudible during operation, the liquid leaves clean and unclouded, suitable for oral administration.

Among the advantages and features can be noted:

• good performance - pumping large volumes of liquid in a short time;
• does not create noise and is compact in size;
• equipped with protection against dry running and motor overheating;
• a convenient carrying handle, to which a cable is also attached for immersing the pump in a narrow well and lifting it back up;
• high-quality material of parts: grille and body made of stainless steel, impeller made of durable polymer;
• presence of a check valve;
• automatic fault detection system;
• can work with partial immersion;
• suitable for drinking water;
• European assembly in Italy with 2 year warranty.

DIVERTRON X is equipped with advanced automation: flow sensors, pressure monitoring and an electrical board that interprets their signals ensure smooth operation of the device without interruptions and accidents.

As practice shows, DAB® pumps can easily withstand 30-50 starts per hour and there is no need to worry about floating pressure. But what you really need to take care of in advance is the quality of the power grid. European devices are little adapted to surges and voltages in our 160-180 V, so if such situations occur, install a stabilizer and you will not have problems.

Submersible pump DAB DIVERTRON with built-in electronics, designed for individual and collective water supply systems. DAB DIVERTRON pump Can be installed in manholes from 6 inches (153 mm) in diameter. The outer casing of the DAB Divertron Pump, hydraulic casing, impellers and diffusers are made of high strength technopolymer and the motor casing, suction grille, shaft and fasteners are made of stainless steel.

Mechanical shaft seals - oil chamber with two stuffing box seals. All models are equipped with an electromechanical control system with built-in pressure and flow sensors. There is a built-in protection against "dry" running and overload. Models with the letter “X” are equipped with a suction pipe for organizing water intake from the upper layers of water using a flexible suction pipe with a float and a mechanical filter made of stainless steel (sold separately).

Working range. productivity - from 0.3 to 5.7 cubic meters / h, head - up to 47 m of water column.
Maximum operating pressure: maximum immersion depth - 10 m.

Pumped liquid. Composition: clean, without solid inclusions and mineral
oils, non-viscous, chemically neutral, similar in characteristics to water.
Temperature - from 0°С to +35°С.

Installation. The motor shaft is in a vertical position. When working for a long time
the pump may not be fully submerged.

Standard power supply: 1x230V
Degree of protection: IP 68
Insulation class: F

For Divertron X model It is necessary to purchase an additional suction pipe with a float. This pipe provides water intake 0.5 meters above the pump.

from the DAB pumps company, occupy a deserved place of honor. Probably one of the first in the “well pump” category. The competition can only come from the Gardena 6000/5 Comfort pump and Grundfos SBA 3-35 AW - but we will tell you a secret, all this equipment is produced at the same plant under different brands. The plant bears the proud name Leader. It is part of the DWT GROUP company - the new name of the DAB PUMPS company, which in turn is part of the DRUNDFOS concern.

Pump dab Divertron 1000 M and Divertron 1200 M purpose

The divertron pump can also be operated in a 6-inch diameter well. Since the divertron has a immersion depth of only 10 meters, this fact should be taken into account during operation. Divertron is not suitable for working in deep wells.

DWT GROUP engineers developed Divetron specifically for use in wells. It was taken into account that they would be used in private households and in collective water supply systems.

Pump dab Divetron Main purpose:

Domestic water supply. There is a certificate according to which the pump is without restrictions suitable “for domestic and drinking water supply”
Irrigation and Horticulture;
Ideal for rainwater harvesting systems that are so popular in Europe. All kinds of large containers “tanks” built underground in the vicinity of the blast furnace area. Such water is often used for technical needs, such as flushing the toilet, watering, and so on.
Systems where stable high pressure is required.

Modifications:

Currently, two modifications of the Dub Divertron pump are produced: With a suction grid made of stainless steel - water intake is made by the lower part of the pump. Such a Divetron must be installed correctly in the well, without allowing the pump to be installed on the bottom. Otherwise, silt and other bottom sediments may enter the water supply system.

The second option is with a pipe for collecting clean water - in this case, a 1 meter long hose is attached to the pump, at the end of which there is a bulb float. Water intake thus occurs in the upper layers of the well, where the water is clean.

To ensure proper pump operation, it is important to follow these guidelines:
dab divertron pumps should only be used when immersed in water.
The pump must be placed in a stable position in a dirt trap if the pump is installed in the lowest part of the well.
Periodically, it is advisable to make checks to make sure that there is no dirt in the area where water enters (leaves, sand, etc.) that the trap can accumulate - protection against garbage collection.

In case of sub-zero temperatures, remove the pump from the liquid, clean it and store it in a place where it cannot freeze. This is absolutely essential to prevent any risk of pump freezing. The pumps must be disconnected from power before any cleaning is carried out. The pump itself is maintenance free.

Pump dab Divertron 1000 M and Divertron 1200 M device

Based on the requirements and desires, the consumer has the opportunity to purchase a Divertron 1000 M pump with three or Divertron 1200 M with four impellers. The dab divertron pump is a multi-stage pump; the more impellers, the greater the pressure the device can produce.

A built-in pressure switch, a control board and a flow sensor are the elements responsible for the smooth operation of the device. An important element of the pump is the flow sensor. All pump control is connected to it, together with built-in electronics for automatic switching on and off.

The electronic board automatically controls switching on and off. The principle is that when you open the tap, water starts flowing, when you close it, the pump stops. Depending on the user's water needs. Electronics protect the dab divertron pump from dry running. If there is no water in the well, the pump turns off.

Design features also include:

The Divertron engine is built into the housing, due to this, it has a low noise level and is cooled by the pumped liquid.
The suction grille or pipe is made of stainless steel
The material used for the impeller and diffusers is technopolymer with high abrasive and corrosion resistance.
Provides protection against excessive engine heating

Divertron 1000 M and Divertron 1200 M Features:

Divertron 1000 M and Divertron 1200 M possible faults:

The pump runs without stopping:

1. Check the check valve. It must be installed at a distance of at least two meters on the discharge pipe;
2. It is necessary to ensure that the taps are also installed at least two meters from the pump on the discharge pipe;

The divertron periodically turns off and on at intervals of 15-20 seconds:

1. No pressure in the accumulator: If an expansion tank is used, the pressure in it is usually preset at 1.5 bar. However, the expansion tank should not be too large; a volume of about 2 liters is recommended (protection against water hammer).
2. If the discharge pipe is open -> loss of reliability in the check valve seal (not to be confused with the O-ring), as a result of which the flow sensor will not control the pump correctly.
3. If the pressure pipe is closed -> the check valve is clogged with mud deposits or has severe wear; -> a manufacturing defect.

The tap is open, but the pump turns off after 30 seconds of operation

The pressure sensor is faulty
The flow sensor has failed

Divertron does not turn on:

1. Check the check valve (it should be open)
2. The pressure in the pressure pipe should not exceed 15 meters of water column (If the pressure is higher, the pump will turn on for the first time, but after stopping it will no longer be able to turn on, since the pressure sensor will not record a decrease in pressure in the pipeline system)
3. After a long period of inactivity of the system, be sure to check the condition of the check valve.

dab pump Divertron 1000 M and Divertron 1200 M Advantages:

1. Low noise characteristics due to the fact that the motor is located inside the pump housing. Provides minimal discomfort
2. Cooling system due to the liquid that the pump pumps. (Divertron suction grill must be in the water at all times)
3. The dab divertron pump has a check valve
4. Turning the device on and off automatically. Principle - open the tap, water flows, close it - the pump stops, reduces electricity costs
5. Built-in overheat protection protects the motor from damage
6. Dry run protection
A stainless steel grill protects the water intake from mud deposits, leaves and branches.